Industrial-Grade Underwater ROV
Flexible
Stable
Endless exploration
CHASING M2 S is an industrial-grade revolutionary underwater robot with upgraded intelligent flight control system and image algorithm, bringing unprecedented underwater perception and freedom of movement.
C-Sense Control System, Flexible and Stable
NeptuneX intelligent flight control system
8 vectored-thrusters and Butterfly wing outline
Apex anti-stuck C-Motor 3.0
Flagship airtight structure
NeptuneX Intelligent Flight Control System
The exclusive CHASING navigation algorithm enables more precise operation; CHASING M2 S can maintain the movement direction even in the presence of external force interference or difficult operating conditions.
NeptuneX Intelligent Flight Control System
The Kalman inertial navigation fusion depth observation method greatly reduces the impact of ocean waves on ROV and maintains the depth stable, significantly enhances the vertical flow resistance capability.
8 Vectored-Thrusters and Butterfly Wing Outline
CHASING M2 S remains the symmetrical vector layout of the eight thrusters and the streamlined design of the butterfly wing outline at front and rear to protect the propellers. It supports 360-degree omnidirectional movement that has high posture response speed and great stability.
Apex Anti-stuck C-Motor 3.0
The third-generation Apex Anti-stuck C-Motor 3.0 used in the CHASING M2 S adopts a unique anti-stuck solution and magnet protection technology, which ensures power supply but also greatly reduces electrochemical corrosion and aggregation rust caused by motor wear. The anti-stuck performance is stronger, making it more reliable to use.
Flagship Airtight Structure
Fully innovate the waterproof structure of the main cabin and lighting to further enhance the stability of underwater operations.
C-Sense Control System, Flexible and Stable
Multiple accessories
Swappable battery
A wide working range
Portable and convenient
All scenarios application
Multiple Accessories
Mountable for CHASING self-developed accessories such as grabber arm, distance lock sonar, laser scaler, floodlights, etc., as well as third-party accessories such as GoPro.
Swappable Battery
CHASING M2 S has a default 97.68Wh battery that can power up to 4 hours operation. The battery compartment is ready to use, 200Wh backup battery is also optinal to meet the needs of long-time operation.
A Wide Working Range
CHASING M2 S can dive to a maximum depth of 100 meters, an operating radius of 200 meters. 400 meters extendable distance.
400m
Maximum movement radius
200m
Movement radius
100m
Maximum depth to dive
Portable and Convenient
CHASING M2 S is portable and has a compact body. Single-person operation and quick deployment brings an effective operating experience under a variety of scenarios.
HD Visual Image Transmission System
4K EIS Image Stabilization Camera
Upgraded CHASING Aquavision image algorithm
User friendly interaction
4K EIS Image Stabilization Camera and 4000lm LED Lights
CHASING M2 S has 4K EIS image stabilization camera and two 2000lm LED lights, which can clearly capture every detail underwater.
4K Video
12 Megapixel
1/2.3 SONY CMOS
F2.8 Aperture
EIS Image Stabilization
4000lm LED lights
Upgraded CHASING Aquavision Image Algorithm
The color restoration algorithm design based on underwater light, physical light route, and environmental, as well as the visual identification and tracking system, completely upgrade image transparency, clarity, color layering, and noise.
CHASING M2 S Specs
Camera
Image Sensor
12 MP CMOS
Resolution
Video Capture: 4KStreaming: 60 Mb/s Video Resolution: 3840 x 2160 (4K), 30 fps; 1920 x 1080 (1080p), 30/60/120 fps
Lens
Aperture: f/2.8Angle of View: 150°
Lights
2 x 2000-Lumen LEDsColor Temperature: 5000-5500 k
Memory
64 GB
ROV
Depth Rating
328' / 100 m
Connectivity
328' / 100 m Tether
Battery Capacity
ROV: 97.68 WhRemote Controller: 2500 mAh
Operating Temperature
14 to 113° / -10 to 45°C
Dimensions
ROV: 14.9 x 10.5 x 6.5" / 38.0 x 26.7 x 16.5 cmRemote Controller: 6.3 x 6.1 x 4.9" / 16.0 x 15.5 x 12.5 cm
Weight
ROV: 9.9 lb / 4.5 kgRemote Controller: 1.5 lb / 685 g
Packaging Info
Package Weight
32.685 lb
Box Dimensions (LxWxH)
22.7 x 19.2 x 18.7"
In the Box
M2 S ROV VEHICLE x1
M2 S REMOTE CONTROL x1
M2 S LEFT THRUSTER x1
M2 S RIGHT THRUSTER x1
MANUAL REEL 200m TETHER x1
FLOODLIGHT 2 x1
GRABBER CLAW A x1
ABS CARRY CASE x1
200WH BATTERY x1
M2 UNIVERSAL CHARGER x1
ADAPTER CABLE (NZ) x1
EPP CASE x1
M2 CHARGING ADAPTER CABLE x1
TOWEL x1
GOPRO MOUNT x1
ROV MAINTENANCE MANUAL (GENERAL EDITION) x1
RC3 CONTROLLER USER MANUAL (GENERAL EDITION) x1
WARRANTY CARD x1
FEATURES
Provides a max flight time of 34 minutes*, allowing you to fly and create freely with peace of mind.
Tips* Measured in a controlled test environment. Specific test conditions are as follows: flying forward at a constant speed of 21.6 kph in a windless laboratory environment at 20 meters above sea level, in photo mode (without photo taking operation during flight), with Obstacle Avoidance Action set to Off, and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version.
CompatibilityDJI Mini 4 Pro
PRODUCT SPECIFICATIONS
Model: BWX140-2590-7.32Weight: Approx. 77.9 gCapacity: 2590 mAhNominal Voltage: 7.32 VMax Charging Voltage: 8.6 VBattery Type: Li-ionEnergy: 18.96 WhCharging Time: 70 minutes (with the DJI 30W USB-C Charger and the battery mounted to the aircraft)58 minutes (with the DJI 30W USB-C Charger and the battery inserted into the Two-Way Charging Hub)Charging Temperature: 5° to 40° C (41° to 104° F)Recommended Chargers: DJI 30W USB-C Charger or other USB Power Delivery chargers
IN THE BOX
Intelligent Flight Battery × 1
NOTE: ALL REPLACEMENTS WILL TAKE 3 - 4 WEEKS FROM THE TIME YOUR CLAIM IS RECEIVED. CARE REFRESH IS A NON-REFUNDABLE AND NON-RETURNABLE ITEM, ONCE CODES HAVE BEEN SUPPLIED THEY CAN NOT BE RETURNED.
FEATURES
Provides two replacement units for an additional charge as per the table below. The Care Refresh 1-year Plan lasts for one year from the date it is bound to your product, and covers for accidents such as water damage or collisions, letting you fly with peace of mind.
DJI Care Refresh 1-Year Plan
ReplacementService
Number of Replacements
2
Number of Flyaway Replacements
1
Replacement Fee
$279.00
Flyaway Replacement Fee
$559.00
Extended Warranty Period
Official warranty is provided during the validity period
Support Renewal?
Renew 1-Year Plan up to twice
Please Note:
DJI Care Refresh can be bound to your DJI product when it meets one of the following criteria:
Brand new and un-activated product.
Aircraft or gimbal activated within the last 48 hours.
Handheld device activated within the last 30 days.
*If your craft has been activated for over 48 hours, follow the instructional guide linked below to verify your craft is in good working order and still eligible for DJI Care Refresh.
Video Verification Guide
Each time you request a replacement, you’ll receive a replacement unit that is new or equivalent to new in performance and reliability.
If you have a DJI Care Refresh activation code, click here to bind it to your aircraft.
WATER DAMAGE COVERAGE
We'll replace your aircraft if an accident occurs, even if it's damaged by water.
TWO REPLACEMENTS, TOTAL PEACE OF MIND
For an additional charge, DJI Care Refresh offers up to two replacement units within one year and covers accidents such as water damage, crashes and collisions. These replacement units will be new or equivalent to new in performance and reliability.
DJI CARE REFRESH REPAIR PROCESS
Ferntech will handle the entire DJI Care Refresh replacement process, which is as follows:
Request a Care Refresh replacement via our online Service Request Form
Delivery of damaged item* – please contact our helpful team at info@ferntech.co.nz and they will provide details on how to get your product to us.
Product assessment by Ferntech team – upon completion, we will select the cheapest option to either have your product repaired or replaced under your DJI Care Refresh policy. Please advise if you would like to have your product replaced even if a repair is cheaper.
*We require your product to complete the DJI Care Refresh process.
Please Note:
DJI Care Refresh covers return shipping fees back to your address.
DJI Care Refresh and the corresponding product must be purchased from New Zealand.
DJI Care Refresh only supports aircraft purchased from official or authorised channels.
Please find detailed terms and conditions under the warranty tab above.
If you want to purchase DJI Care Refresh for an aircraft that has been activated for over 48 hours, follow this Video Verification Guide.
DJI FLYAWAY COVERAGE (DRONE NOT RECOVERED)
Care Refresh offers 1x Flyaway Cover if your DJI Mini 4 Pro is not recovered. To have Flyaway Cover active you need to bind your craft and remote controller to your DJI account by following this video.
NOTE: ALL REPLACEMENTS WILL TAKE 3 - 4 WEEKS FROM THE TIME YOUR CLAIM IS RECEIVED. CARE REFRESH IS A NON-REFUNDABLE AND NON-RETURNABLE ITEM, ONCE CODES HAVE BEEN SUPPLIED THEY CAN NOT BE RETURNED.
FEATURES
Provides two replacement units for an additional charge as per the table below. The Care Refresh 1-year Plan lasts for one year from the date it is bound to your product, and covers for accidents such as water damage or collisions, letting you fly with peace of mind.
DJI Care Refresh 1-Year Plan
ReplacementService
Number of Replacements
4
Number of Flyaway Replacements
2
Replacement Fee
$279.00
Flyaway Replacement Fee
$559.00
Extended Warranty Period
Official warranty is provided during the validity period
Support Renewal?
Renew 1-Year Plan up to twice
Please Note:
DJI Care Refresh can be bound to your DJI product when it meets one of the following criteria:
Brand new and un-activated product.
Aircraft or gimbal activated within the last 48 hours.
Handheld device activated within the last 30 days.
*If your craft has been activated for over 48 hours, follow the instructional guide linked below to verify your craft is in good working order and still eligible for DJI Care Refresh.
Video Verification Guide
Each time you request a replacement, you’ll receive a replacement unit that is new or equivalent to new in performance and reliability.
If you have a DJI Care Refresh activation code, click here to bind it to your aircraft.
WATER DAMAGE COVERAGE
We'll replace your aircraft if an accident occurs, even if it's damaged by water.
TWO REPLACEMENTS, TOTAL PEACE OF MIND
For an additional charge, DJI Care Refresh offers up to two replacement units within one year and covers accidents such as water damage, crashes and collisions. These replacement units will be new or equivalent to new in performance and reliability.
DJI CARE REFRESH REPAIR PROCESS
Ferntech will handle the entire DJI Care Refresh replacement process, which is as follows:
Request a Care Refresh replacement via our online Service Request Form
Delivery of damaged item* – please contact our helpful team at info@ferntech.co.nz and they will provide details on how to get your product to us.
Product assessment by Ferntech team – upon completion, we will select the cheapest option to either have your product repaired or replaced under your DJI Care Refresh policy. Please advise if you would like to have your product replaced even if a repair is cheaper.
*We require your product to complete the DJI Care Refresh process.
Please Note:
DJI Care Refresh covers return shipping fees back to your address.
DJI Care Refresh and the corresponding product must be purchased from New Zealand.
DJI Care Refresh only supports aircraft purchased from official or authorised channels.
Please find detailed terms and conditions under the warranty tab above.
If you want to purchase DJI Care Refresh for an aircraft that has been activated for over 48 hours, follow this Video Verification Guide.
DJI FLYAWAY COVERAGE (DRONE NOT RECOVERED)
Care Refresh offers 1x Flyaway Cover if your DJI Mini 4 Pro is not recovered. To have Flyaway Cover active you need to bind your craft and remote controller to your DJI account by following this video.
FEATURES
Adapt to strong lighting conditions with ND16/64/256 filters and always be ready for the perfect shot.Meets the needs of scenarios when shooting long exposure or in harsh lighting, e.g. long exposure timelapse.
CompatibilityDJI Mini 4 Pro
IN THE BOX
ND16 Filter × 1ND64 Filter × 1ND256 Filter × 1
FEATURES
The lightweight 360° Propeller Guard fully surrounds the propellers to avoid injury or damage and improve flight safety. It is especially useful for beginners flying indoors or in places with numerous obstacles.
Tips1. Before installing the propeller guard on DJI Mini 4 Pro, ensure that the aircraft firmware has been updated to v01.00.0100 or later. Otherwise, flight stability cannot be guaranteed.2. DJI Mini 4 Pro does not support obstacle avoidance after installing the propeller guard and cannot actively detour or brake when it senses an obstacle. When using intelligent features, the aircraft will not have obstacle avoidance capability.3. The aircraft will weigh more than 250 g after installing the propeller guard. Always carefully check and abide by local laws and regulations. If required, obtain the necessary approval and clearance from the related government agencies before flying.4. Do not use the Intelligent Flight Battery Plus after installing the propeller guard. Otherwise, the weight will overload the drone’s capacity, and flight safety cannot be guaranteed.
CompatibilityDJI Mini 4 Pro
PRODUCT SPECIFICATIONS
Weight (one side): 42 gRadius: 97 mmDimensions (after installation): 411.6×335×115 mm (L×W×H)
FEATURES
Get more of the scene with the Wide-Angle Lens, expanding your field of view from 81.5° to 114° when taking photos and from 75° to 100° when recording videos (16:9).
CompatibilityDJI Mini 4 Pro
Experience effortless ocean fishing with the Poseidon 2 PRO BLACK. This drone can cast baits and long lines up to 1km, even in 28kn+ winds. It's also fast and capable of lifting 2.8kg, making it the perfect tool for shore-based anglers to explore deeper waters. Simple to calibrate, with an intuitive app that allows for auto-casting and precise control - the Poseidon PRO BLACK will provide you with an unparalleled fishing experience.
The Poseidon II PRO BLACK is the ultimate drone fishing experience! Featuring an auto cast feature, the drone will fly to your desired destination, drop its payload, and return home autonomously. The accompanying app, available for Apple and Android phones, is user-friendly and provides the user with important data such as distance, height, speed, and battery power. Download the app for free now!
The Poseidon II PRO BLACK is an intelligent water-resistant drone, designed specifically for fishermen. Featuring an IPX water resistance rating, innovative water-resistant structure, Nano waterproof treatment, and high-end light anti-corrosion material, it can handle even the toughest marine environments and withstand prolonged use in corrosive saltwater and heavy rain.
The Poseidon II PRO BLACK offers efficient and secure bait releases with its unique Mechanical Line Release system. The mechanical release ensures you can quickly and effortlessly release your bait each time with reliable results.
Water Resistance – IPX5 Water & Weather Resistant
Image transmission distance – 1000m
Diagonal size (without propeller) – 480mm
Propeller blade size – 13 Inch Carbon Fibre
Maximum horizontal flight speed – 18m/s
Satellite positioning module – UBX-M8030-KT GPS / GLONASS receiver
Safe Wind Speed – 25 knots
Maximum Payload Weight – 2.8KG
Maximum Flight time(No load) – 30min
Maximum Flight time( Load 1kg) – 22min
Maximum Flight time( Load 2.5kg) – 9.5min
Camera parameters – 4K Video
Flight Control System – IDF-9
The Poseidon Battery is a spare battery for the Poseidon II Pro Black Model, featuring 6S cells and a voltage of 22V. The battery discharges at 15C and offers up to 30 minutes of flight time when unloaded. With a capacity of 8000mAh, it provides ample power for extended use.
This pair of spare propellers is compatible with the Poseidon II Pro Black. Featuring full carbon-fiber construction, these propellers are lightweight, durable, and provide improved aerodynamic efficiency and higher lifting capacity. Easy to install and remove for hassle-free maintenance.
This Poseidon replacement landing gear is lightweight and durable, providing secure protection for your Poseidon Pro fishing drone. Made from strong carbon fiber rods and shock-absorbing rubber connectors, this landing gear provides strong, reliable support.
Fisherman FD3
Fisherman FD3 is the most easy-to-use and reliable waterproof fishing drone ever made by SwellPro. It consolidates several advantages from its fishing drone siblings: the power-efficiency from FD1, the ease-of-use from SD4, the enhanced safety from Max. Fisherman FD3 comes in 2 versions: the advanced version features a 4K camera video system while the basic version dedicates 100% of its power to carrying baits.
4.8 LBS / 2.2 KG Bait Capacity
27 Min Flight Time
S5 Flight Controller
GPS 9.0 Precise Positioning
Calibration-free Flight Sensors
Slide-in Battery
IP67 Saltwater-proof
Level 7 Wind Resistance
Auto-Fish
FDFly APP
4.8 LBS / 2.2 KGBait Capacity
Fisherman FD3 is reliable for carrying baits of up to 4.8 lbs or 2.2 kg into the ocean. The great lifting power is drawn from a high capacity and high voltage 6S battery, high thrust motors and large-sized carbon fiber propellers. New electronic speed controllers enable excellent power-to-payload ratio and extended flight time.
Max Flight Time With Baits
The flight time of FD3 can range from 9 minutes to 27 minutes on a single battery charge, largely depending on the weight of baits you attach to the drone.
no baits ~ 27 minutes
1 KG / 2.2 lbs ~ 14 minutes
2 KG / 4.4 lbs ~ 9 minutes
The Safest Drone on the Surf
S5 Flight ControllerThe AlphaGo for Fishing Drone
100% faster than S4.Refined algorithms for improved flight stability and altitude control.Higher tolerance for heat, interference, and vibration.More real-time data feedback for an interactive and safe control.The new S5 flight controller powers the FD3 to reaches new heights in the performance of fishing drones.
Calibration-free
The S5 can automatically calibrate the flight sensors and eliminate magnetic interference to ensure an accurate and reliable flight performance in different locations. You don’t need to calibrate the FD3 in any beach of the world.
Pendulum-free
The S5 is fine-tuned to increase stability and reduce pendulum effect while the drone is carrying a swaying baited line.
Auto-drop & Return
Fisherman FD3 can automatically release the baits and fly back to the shore in case of low battery and loss of signal.
GPS 9.0Your Path to Seamless Drone Fishing
The latest 9th-gen GPS, compared with predecessors, makes great improvements in assisting FD3's flight by providing accurate positioning, navigation, and several safety features.
Higher accuracy
Being able to acquire up to 30 satellites, FD3 ensures precise navigation and maintains stable hovering in place.
Faster Acquisition
With stronger signal reception, FD picks up satellites more quickly than ever and reduces the time required to unlock motors.
Multi-satellite
FD3 can access multiple satellite systems including GPS, GlONASS, Galileo, and BeiDou for better signal quality and accuracy.
Interference-free
Advanced signal processing technology is implemented in the GPS receiver to filter out interference and noise.
IP67 Saltwater-proof
The aircraft of FD3 is entirely sealed, then air-pressure tested and dunk tested to guarantee 100% waterproof. The fulsage is made from marine-grade ABS to increase durability and survivability under great water pressure.
Corrosion-free
The waterproof motors, waterproof bait release and internal electronics of FD3 are coated with corrosion-resistant coating - adding an extra layer of protection against the salty air above the ocean.
Self-Floating Design
We designed FD3 with sufficient buoyancy on the aircraft itself. The drone can keep floating when landing on the water. Then, you can control it to take off again from the water and fly back to the shore.
Automatic Flip
If the FD3 accidentally capsizes in the water, you can use the joysticks to flip it back to its normal position, and take off!
Level 7 Wind Resistance
Thanks to the strong propulsion system and the GPS 9.0, FD3 can maintain a stable position and attitude in winds up to 20 m/s (38mph).
The Simplest Fishing Drone On the Earth
Slide-in Battery
Swapping battery is super easy. Open the hatch door, slide the battery into the compartment, hit the power button, then you are good to go! The hatch door is 100% waterproof with a rubber seal when closed.
Screw-on Propellers
The threaded propeller mount allows for easy installation and keep the propellers from flying off the fast-spinning motors when the FD3 requires lots of thrust.
Fisherman-friendly Remote Controller
The remote controller of FD3 has a sleek game-console design for maximum comfort. The interface is clean with well-labeled buttons for intuitive control. Pilots can rely on the on-screen telemetry, video feedback and voice alerts to get situational awareness of the aircraft in real-time. A splash-proof and sand-proof body allows the remote controller to survive on the beach. There is no room for mistakes when you are controlling the FD3.
The basic remote controller has a an inbuilt monochrome display that only shows flight telemetry.
Specifications
AIRCRAFT:
Waterproof rating: IP67Drone weight: 5.5 lbs / 2.54 kg (including battery, propellers, gimbal camera, and payload release module)Size (w/o propeller): 14.6*14.6*7.9 in / 372*372*202mmMax ascend speed: 7 mph / 3 m/sMax descent speed: 4.5 mph / 2 m/sMax flight speed: -GPS: 22 mph / 10 m/s-ATTI: 40 mph / 18 m/s (without payload); 31 mph / 14 m/s (with payload)Max tilt angle: 30°Max altitude from take-off point: 393 ft / 120 mMax flight distance: 1 mile / 1500 mMax image transmission distance: 0.74 mile / 1200 mMax payload capacity: 4.4 lbs / 2 kgFlight time: up to 27 mins (no wind & no load)Max wind speed resistance: 40 mph / 18 m/s / 35 knotsHovering precision: ±1.6 feet / ±0.5 mSatellite positioning system: GPS/GalileoRC transmitter power: 2.405-2.475GHz, <33 dBm(FCC), <20 dBm(CE)Image transmitter power(for Advanced Version only): 5.725-5.825GHz,<33 dBm(FCC),<14 dBm(CE)Working temperature: 14℉ ~ 104℉ / -10℃ ~ 40℃Certifications: CE/FCC/ROHS/RCM
REMOTE CONTROLLER:
Weight: 1.56 lbs / 709 gWaterproof rating: IP54Size: 11*7.5*3 inch / 276*190*74 mmOperating Frequency: 2.405-2.475 GHz, 5.725 - 5.825 GHz (advanced version); 2.405-2.475 GHz (basic version)Transmitter Power (EIRP): 2.405-2.475GHz: <26 dBm (FCC), <20 dBm (CE)Sensitivity: -92 dBBattery: 2S 3000 mAhWorking time: 5 hours (advanced version); 9 hours (basic version)Charging time: 3 hoursPower input: 5V/2A USB-CMulti-color display (advanced version):-Screen size: 5 inch-Screen resolution: 800*480 px-Screen brightness: 500 cd/m2-Screen Aspect ratio: 16:9Monochrome display (basic version):-Screen size: 3.5 inchLanguage: EnglishWorking temperature: 14℉ ~ 104℉ / -10℃ ~ 40℃
FLIGHT BATTERY:
Capacity: 4200 mAhVoltage: 23.1VType: 6S LIHVSize: 6*3.2*1.9 in / 153.6*82.4*48.3mmWeight: 1.57 lbs / 716 gWorking temperature: 32℉ ~ 104℉ / 0℃ ~ 40℃Charging Time: 120 minsMax Charging current: 5A
CHARGER:
Input: 100 - 240VOutput: 25.2VMax charging power: 150WSupported battery types and cell: 6S LIHVSize: 5.6*4*2.4 inch / 143*100*60 mmPower cable: 3.9 feet / 1.2 mCharging cable: 1.6 feet / 0.5 mWeight: 1 lb / 454.6 gWorking & storage temperature: 32℉ ~ 140℉ / 0℃ ~ 60℃Available types of power adapters:-Type I: Australia & New Zealand
What’s in the box?
Basic Version
Aircraft x 1 Remote controller x 1Flight battery x 1Charger x 1Propellers x 2 (pairs)Bait release x 1USB-C cable x 1Charging cable x 1Power adapter x 1Phone mount x 1 Carry case x 1
Fisherman FD3
Fisherman FD3 is the most easy-to-use and reliable waterproof fishing drone ever made by SwellPro. It consolidates several advantages from its fishing drone siblings: the power-efficiency from FD1, the ease-of-use from SD4, the enhanced safety from Max. Fisherman FD3 comes in 2 versions: the advanced version features a 4K camera video system while the basic version dedicates 100% of its power to carrying baits.
4.8 LBS / 2.2 KG Bait Capacity
27 Min Flight Time
S5 Flight Controller
GPS 9.0 Precise Positioning
Calibration-free Flight Sensors
Slide-in Battery
IP67 Saltwater-proof
Level 7 Wind Resistance
Auto-Fish
FDFly APP
4.8 LBS / 2.2 KGBait Capacity
Fisherman FD3 is reliable for carrying baits of up to 4.8 lbs or 2.2 kg into the ocean. The great lifting power is drawn from a high capacity and high voltage 6S battery, high thrust motors and large-sized carbon fiber propellers. New electronic speed controllers enable excellent power-to-payload ratio and extended flight time.
Max Flight Time With Baits
The flight time of FD3 can range from 9 minutes to 27 minutes on a single battery charge, largely depending on the weight of baits you attach to the drone.
no baits ~ 27 minutes
1 KG / 2.2 lbs ~ 14 minutes
2 KG / 4.4 lbs ~ 9 minutes
The Safest Drone on the Surf
S5 Flight ControllerThe AlphaGo for Fishing Drone
100% faster than S4.Refined algorithms for improved flight stability and altitude control.Higher tolerance for heat, interference, and vibration.More real-time data feedback for an interactive and safe control.The new S5 flight controller powers the FD3 to reaches new heights in the performance of fishing drones.
Calibration-free
The S5 can automatically calibrate the flight sensors and eliminate magnetic interference to ensure an accurate and reliable flight performance in different locations. You don’t need to calibrate the FD3 in any beach of the world.
Pendulum-free
The S5 is fine-tuned to increase stability and reduce pendulum effect while the drone is carrying a swaying baited line.
Auto-drop & Return
Fisherman FD3 can automatically release the baits and fly back to the shore in case of low battery and loss of signal.
GPS 9.0Your Path to Seamless Drone Fishing
The latest 9th-gen GPS, compared with predecessors, makes great improvements in assisting FD3's flight by providing accurate positioning, navigation, and several safety features.
Higher accuracy
Being able to acquire up to 30 satellites, FD3 ensures precise navigation and maintains stable hovering in place.
Faster Acquisition
With stronger signal reception, FD picks up satellites more quickly than ever and reduces the time required to unlock motors.
Multi-satellite
FD3 can access multiple satellite systems including GPS, GlONASS, Galileo, and BeiDou for better signal quality and accuracy.
Interference-free
Advanced signal processing technology is implemented in the GPS receiver to filter out interference and noise.
IP67 Saltwater-proof
The aircraft of FD3 is entirely sealed, then air-pressure tested and dunk tested to guarantee 100% waterproof. The fulsage is made from marine-grade ABS to increase durability and survivability under great water pressure.
Corrosion-free
The waterproof motors, waterproof bait release and internal electronics of FD3 are coated with corrosion-resistant coating - adding an extra layer of protection against the salty air above the ocean.
Self-Floating Design
We designed FD3 with sufficient buoyancy on the aircraft itself. The drone can keep floating when landing on the water. Then, you can control it to take off again from the water and fly back to the shore.
Automatic Flip
If the FD3 accidentally capsizes in the water, you can use the joysticks to flip it back to its normal position, and take off!
Level 7 Wind Resistance
Thanks to the strong propulsion system and the GPS 9.0, FD3 can maintain a stable position and attitude in winds up to 20 m/s (38mph).
The Simplest Fishing Drone On the Earth
Slide-in Battery
Swapping battery is super easy. Open the hatch door, slide the battery into the compartment, hit the power button, then you are good to go! The hatch door is 100% waterproof with a rubber seal when closed.
Screw-on Propellers
The threaded propeller mount allows for easy installation and keep the propellers from flying off the fast-spinning motors when the FD3 requires lots of thrust.
Fisherman-friendly Remote Controller
The remote controller of FD3 has a sleek game-console design for maximum comfort. The interface is clean with well-labeled buttons for intuitive control. Pilots can rely on the on-screen telemetry, video feedback and voice alerts to get situational awareness of the aircraft in real-time. A splash-proof and sand-proof body allows the remote controller to survive on the beach. There is no room for mistakes when you are controlling the FD3.
The basic remote controller has a an inbuilt monochrome display that only shows flight telemetry.
Specifications
AIRCRAFT:
Waterproof rating: IP67Drone weight: 5.5 lbs / 2.54 kg (including battery, propellers, gimbal camera, and payload release module)Size (w/o propeller): 14.6*14.6*7.9 in / 372*372*202mmMax ascend speed: 7 mph / 3 m/sMax descent speed: 4.5 mph / 2 m/sMax flight speed: -GPS: 22 mph / 10 m/s-ATTI: 40 mph / 18 m/s (without payload); 31 mph / 14 m/s (with payload)Max tilt angle: 30°Max altitude from take-off point: 393 ft / 120 mMax flight distance: 1 mile / 1500 mMax image transmission distance: 0.74 mile / 1200 mMax payload capacity: 4.4 lbs / 2 kgFlight time: up to 27 mins (no wind & no load)Max wind speed resistance: 40 mph / 18 m/s / 35 knotsHovering precision: ±1.6 feet / ±0.5 mSatellite positioning system: GPS/GalileoRC transmitter power: 2.405-2.475GHz, <33 dBm(FCC), <20 dBm(CE)Image transmitter power(for Advanced Version only): 5.725-5.825GHz,<33 dBm(FCC),<14 dBm(CE)Working temperature: 14℉ ~ 104℉ / -10℃ ~ 40℃Certifications: CE/FCC/ROHS/RCM
REMOTE CONTROLLER:
Weight: 1.56 lbs / 709 gWaterproof rating: IP54Size: 11*7.5*3 inch / 276*190*74 mmOperating Frequency: 2.405-2.475 GHz, 5.725 - 5.825 GHz (advanced version); 2.405-2.475 GHz (basic version)Transmitter Power (EIRP): 2.405-2.475GHz: <26 dBm (FCC), <20 dBm (CE)Sensitivity: -92 dBBattery: 2S 3000 mAhWorking time: 5 hours (advanced version); 9 hours (basic version)Charging time: 3 hoursPower input: 5V/2A USB-CMulti-color display (advanced version):-Screen size: 5 inch-Screen resolution: 800*480 px-Screen brightness: 500 cd/m2-Screen Aspect ratio: 16:9Monochrome display (basic version):-Screen size: 3.5 inchLanguage: EnglishWorking temperature: 14℉ ~ 104℉ / -10℃ ~ 40℃
FLIGHT BATTERY:
Capacity: 4200 mAhVoltage: 23.1VType: 6S LIHVSize: 6*3.2*1.9 in / 153.6*82.4*48.3mmWeight: 1.57 lbs / 716 gWorking temperature: 32℉ ~ 104℉ / 0℃ ~ 40℃Charging Time: 120 minsMax Charging current: 5A
CHARGER:
Input: 100 - 240VOutput: 25.2VMax charging power: 150WSupported battery types and cell: 6S LIHVSize: 5.6*4*2.4 inch / 143*100*60 mmPower cable: 3.9 feet / 1.2 mCharging cable: 1.6 feet / 0.5 mWeight: 1 lb / 454.6 gWorking & storage temperature: 32℉ ~ 140℉ / 0℃ ~ 60℃Available types of power adapters:-Type I: Australia & New Zealand
CAMERA:
Waterproof rating: IP67Stabilization: 1-axis (tilt)Tilt range: -90° to 0°Weight: 0.38 lbs / 176.5 gSize: 3.1*2.7*2.7 inch / 79*69*70 mmImage sensor: 1/2.3 CMOS, 12MLens: F4.5mm f/2.65, FOV: 92.6°ISO range: 100 - 3200Shutter speed: 16 - 1/16000 sVideo resolution: 4K:30fps | 2.7K:60fps | 1080P:120/60/30fps | 720P: 240/120/60fpsPhoto resolution: 4000*3000 (4:3), 3840*2160 (16:9)Max video bitrate: 60 MbpsPhoto format: JPEG / DNG (RAW)Video format: MP4 /MOVSupported memory card: microSD card with a maximum capacity of 128GB, write speed ≥ 60 MB/s, recommend using Class 10 or above & UHS-1 ratingWorking temperature: 14℉ ~ 104℉ / -10℃ - 40°C
What’s in the box?
Advance Version
Aircraft x 1 Remote controller x 1Flight battery x 1Charger x 1Propellers x 2 (pairs)Camera x 1Bait release x 1USB-C cable x 1Charging cable x 1Power adapter x 1Phone mount x 1 Carry case x 1
With a 4200mAh 6S LiHV Flight Battery, Fisherman FD3 Fishing Drone flight time can range from 9 to 27 minutes, largely depending on the weight of the baits you attach to the drone.
Specification:
Capacity: 4200 mAhVoltage: 23.1VType: 6S LIHVSize: 6*3.2*1.9 in / 153.6*82.4*48.3mmWeight: 1.57 lbs / 716 gWorking temperature: 32℉ ~ 104℉ / 0℃ ~ 40℃Charging Time: 120 minsMax Charging current: 5A
In the box: Fisherman FD3 Flight Battery x 1pcs
Compatibility: Fisherman FD3
Large-sized Fisherman FD3 carbon fiber propellers and anti-loose design make the flight safer and more stable, providing fishermen with an excellent flight experience.
Tips:
One pair of Fisherman FD3 Carbon Fiber Propellers include 1 x clockwise propeller and 1 x counter-clockwise propeller.
Specifications:
Material: carbon fiber
In the box: Carbon Fiber Propellers x 1 pair
Compatibility: Fisherman FD3
Why CPL: helps to remove unwanted reflections from non-metallic surfaces such as water or glass from the sun. It also enhances color and contrast by reducing the glare of water or the sky.
Optical Glass: German-made optical glass provides the best possible optics, surpassing or matching any other brand in the industry with color-neutral, scratch-resistant, Waterproof, DustProof, and OilProof coating.
Installation: Remove the stock filter by twisting the counterclockwise before installing a new filter.
Gimbal Safe: Freewell's Gimbal Safe technology is designed to create filters for each drone that guarantee no adverse effects on the gimbal, ensuring maximum safety.
Why UV? The sun’s emission of UV rays is significantly bad for your camera lens. Freewell UV filter is designed to absorb almost all ranges of UV rays to give more precise and sharper pictures with less haze. It also functions as a protective layer that shields the lens from dirt, dust, and scratches.
Optical Glass: German-made optical glass provides the best possible optics, surpassing or matching any other brand in the industry with color-neutral scratch-resistant, Waterproof, DustProof, and OilProof coating.
Installation: Remove the stock filter by twisting the counterclockwise before installing a new filter.
Gimbal Safe: Freewell's Gimbal Safe technology is designed to create filters for each drone that guarantee no adverse effects on the gimbal, ensuring maximum safety.
Hard Stop VND: Hard stop VND filters offer a fixed range of densities with physical stops at both ends to avoid vignettes, providing quick and easy adjustment of the light attenuation level.
What is True Color? VND filters are made of two polarizers and can potentially cause color shifts; the True Color coating technology helps minimize this effect, ensuring that you get the most accurate colors possible they may cause color shifts but are relatively minimal compared with other VND.
Installation: Remove the stock filter by twisting it counterclockwise before installing a new filter.
Gimbal Safe: Freewell's Gimbal Safe technology is designed to create filters for each drone that guarantee no adverse effects on the gimbal, ensuring maximum safety.
Industrial-Grade Underwater Drone for Professional Scenario
Stronger Power, 4 Knots Speed
Up to 2 Hours of Battery Life with 300Wh Battery (Standard)
Up to 5 Hours of Battery Life with 700Wh Battery (Optional)
Unlimited Battery Life with AC Power
More Advanced Exclusive Accessories
Depth Rating 490ft / 150m
4K UHD EIS Camera
CHASING M2 PRO is a light industrial underwater ROV designed for professional users and industrial applications. It works with various power supply and has stronger powered motors. The drone can be mounted more so as to greatly meet the needs of various scenarios.
Stronger Power, More Accessories, Various Power Supply (AC & DC)
Industrial Application
Underwater Search and Rescue
Water Conservancy and Hydropower Inspection
Scientific Exploration
Hull & Dock Inspection
Aquaculture Inspection
Omni Movement, Multi-Angle Shooting
CHASING M2 PRO has 8 vectored thrusters layout which allows OMNI movement in all directions. Under any posture, the depth can be set with one key, which can ensure the drone to accurately hover to to achieve any perspective shooting, observation and operation needs of any angle of view.
Forward and Backward
Floating and Diving
Lateral Movement
Turn Left / Turn Right
±90° Pitch and Tilt
Rolling 360° ( Side-to-side & Forward and back)
More Exclusive Accessories to Meet More Professional Scenarios
Not only compatible with CHASING M2's attachments such as Grabber Claw, Diving Light and Laser Scaler etc, but also compatible with Control Console (High-brightness Screen), Docking Station, USBL Underwater Positioning, Multibeam Sonar, Auxiliary Camera and other M2 PRO exclusive enhanced accessories.
Control ConsoleUSBL Underwater PositioningMultibeam SonarAuxiliary Camera
The control console is used for operating the underwater ROV and all accessories. The keys are well laid out for more professional control. With the high brightness screen, the picture is clearly visible even in daylight.
It can accurately locate the location of underwater drones and record their movement tracks. Combination solution: USBL + Unmanned Surface Vehicle + Control Console + Docking Station.
It generates a wide range of high-quality images through acoustic reflection to enable fast search and target positioning, no longer affected by muddy water.Combination solution: Multibeam Sonar (support other brands) + Sonar Tether + Docking Station.
Observe objects simultaneously in dual-view with two cameras. Combination solution: Auxiliary Camera and Docking Station.
Unlimited Battery Life with AC & DC Power Supply
CHASING M2 PRO works with both AC and battery power supply. The default 300Wh high-capacity lithium battery is replaceable, The optional 700Wh lithium battery can work up to 5 hours, and the optional external AC equipment can truly achieve unlimited battery life.
Removable batteryAC power supply
Stronger Power Anti-Stuck Motor, 4 Knots Anti-Flow
The anti-stuck motor is 150W and the power has been upgraded by 50% compared to the Chasing M2 motor, which can resist the flow of water at 4 knots (2m/s) in all directions.
Dive Up to 150 Meters to Explore More Unknowns
The waterproof level of CHASING M2 PRO has been upgraded to 150 meters (490 FT), diving deeper and exploring more underwater unknowns.
150 Meters
Maximum working depth
-10℃~45℃
Operating temperature
2 m/s(4 Knots)
Maximum speed
Up to 5 Hours
Runtime
4K EIS Image Stabilization Camera for Clearer Shooting
Built-in 4K/12M pixel camera, 1/2.3 SONY CMOS, EIS stabilization feature. With 4000 lumens LED lights, the camera of CHASING M2 PRO can capture every detail clearly underwater.
4K
Video resolution
12M
Max. photo pixel
152°
FOV
F1.8
Lens
User Friendly Interaction
Live broadcast
Social media sharing
HDMI output
Taking photos while recording video
Time-lapse photography & Slow motion
Quick editing features
Three Devices Shared at the Same Time
CHASING M2 PRO supports three devices to watch underwater images simultaneously and meet the needs for multiple viewers.
Removable SD Memory Card, Download Anytime and Anywhere
The 128G SD memory card is removable, and users can choose SD cards of different capacities, up to 512G.
Product Specifications
CHASING M2 PRO
Max Depth
490 ft (150 m)
Video Bitrate
60 M
Tether Length
656 ft / 984 ft / 1312 ft
SD Card Storage
128 G
Video Resolution
3840 x 2160 (UHD)
Photo Resolution
12 M
Drone
Size
18.9" x 10.5" x 6.4" (480 x 267 x 165 mm)
Weight
≈5.7 kg
Max Depth
490 ft (150 m)
Max Speed
4 Knots (2 m/s)
Runtime
Up to 4 hours
Battery
300 Wh
Working Temperature
-10℃~45℃
Control Console
Size
19" x 14.8" x 7" (484 x 375 x 178 mm)
Weight
8 kg
Dispaly
1920 x 1080, 1000 cd/m2
Working Temperature
-10 ℃ ~ 45 ℃
Power Supply
21.6 V
Interface
RJ45 x 2, USB 2.0 x 2, QC3.0 USB x1, AC Input x 1, AC output to ROV x 1
Camera
CMOS
1/2.3 inch
Lens
F1.8
Focus
1m
ISO Range
100-6400
FOV
152°
Max Resolution
12 Meg pixel
Format
JPEG/DNG
Video
UHD: 3840*2160 (4K) 30fpsFHD: 1920*1080 (1080p) 30/60/120fps
Slow Motion
720p: 8x (240 fps)1080p: 4x (120 fps)
Time Lapse
4K / 1080p supported
Video Bitrats
60 M
Video Format
MP4
SD Card
128 G
Remote Controller
Size
6.3" x 6.1" x 4.9" (160 x 155 x 125 mm)
Weight
685 g
Battery
2500 mAh
Runtime
≥ 6 hours (depending on the environment)
Wireless
Wi-Fi supported
HDMI
Support
Handle Spring
Maximum support 10 inch
Sensor
IMU
3 axis gyro & accelerometer & compass
Depth Sensor
< ± 0.25 m
Temperature Sensor
< ± 2 ℃
Charger
Power
2.9A / 25.2V
ROV Charging Time
4.5 H
RC Charging Time
2 H
LED
Brightness
2 x 2000 Lumens
Color Temperature
5000 K - 5500 K
CRI
85
Dimming
Three gears
In The Box
Drone ×1
Remote Controller ×1
Reel with 200m Tether ×1
GoPro Mounting Base ×1
Power Cord ＆ 3 in 1 Charger ×1
Carrying Case ×1
Type-C to Type-C Data Cable ×1
Type-C to Lighting Data Cable ×1
Type-C to Micro-USB Data Cable ×1
Sun Shade ×1
M3X8 Screws ×4
Support Documents ×4
O-rings ×18
Towel×1
300Wh Battery ×2
Floodlight 2 ×1
Industrial-Grade Underwater Drone for Professional Scenario
Stronger Power, 4 Knots Speed
Up to 2 Hours of Battery Life with 300Wh Battery (Standard)
Up to 5 Hours of Battery Life with 700Wh Battery (Optional)
Unlimited Battery Life with AC Power
More Advanced Exclusive Accessories
Depth Rating 490ft / 150m
4K UHD EIS Camera
CHASING M2 PRO is a light industrial underwater ROV designed for professional users and industrial applications. It works with various power supply and has stronger powered motors. The drone can be mounted more so as to greatly meet the needs of various scenarios.
Stronger Power, More Accessories, Various Power Supply (AC & DC)
Industrial Application
Underwater Search and Rescue
Water Conservancy and Hydropower Inspection
Scientific Exploration
Hull & Dock Inspection
Aquaculture Inspection
Omni Movement, Multi-Angle Shooting
CHASING M2 PRO has 8 vectored thrusters layout which allows OMNI movement in all directions. Under any posture, the depth can be set with one key, which can ensure the drone to accurately hover to to achieve any perspective shooting, observation and operation needs of any angle of view.
Forward and Backward
Floating and Diving
Lateral Movement
Turn Left / Turn Right
±90° Pitch and Tilt
Rolling 360° ( Side-to-side & Forward and back)
More Exclusive Accessories to Meet More Professional Scenarios
Not only compatible with CHASING M2's attachments such as Grabber Claw, Diving Light and Laser Scaler etc, but also compatible with Control Console (High-brightness Screen), Docking Station, USBL Underwater Positioning, Multibeam Sonar, Auxiliary Camera and other M2 PRO exclusive enhanced accessories.
Control ConsoleUSBL Underwater PositioningMultibeam SonarAuxiliary Camera
The control console is used for operating the underwater ROV and all accessories. The keys are well laid out for more professional control. With the high brightness screen, the picture is clearly visible even in daylight.
It can accurately locate the location of underwater drones and record their movement tracks. Combination solution: USBL + Unmanned Surface Vehicle + Control Console + Docking Station.
It generates a wide range of high-quality images through acoustic reflection to enable fast search and target positioning, no longer affected by muddy water.Combination solution: Multibeam Sonar (support other brands) + Sonar Tether + Docking Station.
Observe objects simultaneously in dual-view with two cameras. Combination solution: Auxiliary Camera and Docking Station.
Unlimited Battery Life with AC & DC Power Supply
CHASING M2 PRO works with both AC and battery power supply. The default 300Wh high-capacity lithium battery is replaceable, The optional 700Wh lithium battery can work up to 5 hours, and the optional external AC equipment can truly achieve unlimited battery life.
Removable batteryAC power supply
Stronger Power Anti-Stuck Motor, 4 Knots Anti-Flow
The anti-stuck motor is 150W and the power has been upgraded by 50% compared to the Chasing M2 motor, which can resist the flow of water at 4 knots (2m/s) in all directions.
Dive Up to 150 Meters to Explore More Unknowns
The waterproof level of CHASING M2 PRO has been upgraded to 150 meters (490 FT), diving deeper and exploring more underwater unknowns.
150 Meters
Maximum working depth
-10℃~45℃
Operating temperature
2 m/s(4 Knots)
Maximum speed
Up to 5 Hours
Runtime
4K EIS Image Stabilization Camera for Clearer Shooting
Built-in 4K/12M pixel camera, 1/2.3 SONY CMOS, EIS stabilization feature. With 4000 lumens LED lights, the camera of CHASING M2 PRO can capture every detail clearly underwater.
4K
Video resolution
12M
Max. photo pixel
152°
FOV
F1.8
Lens
User Friendly Interaction
Live broadcast
Social media sharing
HDMI output
Taking photos while recording video
Time-lapse photography & Slow motion
Quick editing features
Three Devices Shared at the Same Time
CHASING M2 PRO supports three devices to watch underwater images simultaneously and meet the needs for multiple viewers.
Removable SD Memory Card, Download Anytime and Anywhere
The 128G SD memory card is removable, and users can choose SD cards of different capacities, up to 512G.
Product Specifications
CHASING M2 PRO
Max Depth
490 ft (150 m)
Video Bitrate
60 M
Tether Length
656 ft / 984 ft / 1312 ft
SD Card Storage
128 G
Video Resolution
3840 x 2160 (UHD)
Photo Resolution
12 M
Drone
Size
18.9" x 10.5" x 6.4" (480 x 267 x 165 mm)
Weight
≈5.7 kg
Max Depth
490 ft (150 m)
Max Speed
4 Knots (2 m/s)
Runtime
Up to 4 hours
Battery
300 Wh
Working Temperature
-10℃~45℃
Control Console
Size
19" x 14.8" x 7" (484 x 375 x 178 mm)
Weight
8 kg
Dispaly
1920 x 1080, 1000 cd/m2
Working Temperature
-10 ℃ ~ 45 ℃
Power Supply
21.6 V
Interface
RJ45 x 2, USB 2.0 x 2, QC3.0 USB x1, AC Input x 1, AC output to ROV x 1
Camera
CMOS
1/2.3 inch
Lens
F1.8
Focus
1m
ISO Range
100-6400
FOV
152°
Max Resolution
12 Meg pixel
Format
JPEG/DNG
Video
UHD: 3840*2160 (4K) 30fpsFHD: 1920*1080 (1080p) 30/60/120fps
Slow Motion
720p: 8x (240 fps)1080p: 4x (120 fps)
Time Lapse
4K / 1080p supported
Video Bitrats
60 M
Video Format
MP4
SD Card
128 G
Remote Controller
Size
6.3" x 6.1" x 4.9" (160 x 155 x 125 mm)
Weight
685 g
Battery
2500 mAh
Runtime
≥ 6 hours (depending on the environment)
Wireless
Wi-Fi supported
HDMI
Support
Handle Spring
Maximum support 10 inch
Sensor
IMU
3 axis gyro & accelerometer & compass
Depth Sensor
< ± 0.25 m
Temperature Sensor
< ± 2 ℃
Charger
Power
2.9A / 25.2V
ROV Charging Time
4.5 H
RC Charging Time
2 H
LED
Brightness
2 x 2000 Lumens
Color Temperature
5000 K - 5500 K
CRI
85
Dimming
Three gears
In The Box
Drone (Excl Battery) ×1
Remote Controller ×1
GoPro Mounting Base ×1
Power Cord ＆ 3 in 1 Charger ×1
Carrying Case ×1
Type-C to Type-C Data Cable ×1
Type-C to Lighting Data Cable ×1
Type-C to Micro-USB Data Cable ×1
Sun Shade ×1
M3X8 Screws ×4
Support Documents ×4
O-rings ×18
Towel×1
Shorebase Power Supply System with 200m Tether x1
Floodlight 2 ×1
CHASING M2 PRO MAX is an Industrial grade underwater remote operated vehicle (ROV) designed for Government and enterprise users.
It adopts new generation of accessories mounting method, quick assembly and disassembly technology, shore based power supply and external floodlights provide easier-to-use, more professional, and more reliable underwater solutions for various industrial applications.
Product Specifications
CHASING M2 PRO MAX
Maximum Depth
200m
Video Maximum Stream
60M
Maximum Battery Life
＞4h
Micro SD Card Memory
128G
Maximum Image Resolution
12 M
Normal Video
FHD: 1920 x 1080 (1080p) 30 / 60 / 120 fps
ROV
Size
608 x 294 x 196 mm (Excluding the floodlight)
Weight
≈8 KG
Maximum Depth
200m
Pull (forward / drift upwards / traverse)
5.7 / 4.0 / 3.6 KG
Maximum Battery Life
＞4h
Battery
302.4Wh
Operating Temperature
-10 ℃ ~ 45 ℃
E-Reel
Size
296x189x279 mm
Weight
3.5 KG
Max Storage Length
200 meters
Battery Capacity
4800 mAh
Number of Cycles
>300 times
Runtime
30 times
Wiping Speed
3 gears
Take-Up Speed (200m)
Fast speed 220 s Low speed 9 min
Operating Temperature
-10℃~45℃
Charging Time
2 H (12 V ) / 4 H (25.2 V)
Remote Controller
Size
160 x 155 x 125 mm
Weight
685 g
Battery Capacity
2500 mAh
Battery Life
≥6H (Depend on working condition)
Wi-Fi
Support
HDMI
support
USB
support
Phone / Tablet Clip
Maximum support 10 inches
LED Lights
Brightness
2 x 4000 lm
Color Temperature
5000 K ~ 5500 K
CRI
85
Dimming
Three adjustable
Sensor
IMU
Three-axis gyroscope acceleration compass
Depth Sensor
＜±0.25 m
Temperature Sensor
＜±2 ℃
Adapter
Adapter
8 A / 25.2 V
ROV Charging Time
2.5 H
Remote Controller Charging Time
2 H
Camera
CMOS
1/2.3’’
Aperture
f/1.8
Focal Length
0.3m~∞
ISO Range
100-6400
Field of View
150°
Maximum Image Resolution
12 M
Image File Types
JPEG / DNG
Normal Video
UHD: 3840 x 2160 (4K) 30 fps FHD: 1920 x 1080 (1080p) 30 / 60 / 120 fps
Slow Motion Video
720p: 8x (240fps) 1080p: 4x (120fps)
Time-Lapse Video
4K / 1080p
Video Maximum Stream
60 M
Video Type
MP4
Micro SD Card Memory
128 G
In The Box:
Drone ×1
CHASING E-Reel 200m ×1
Charging cable & 3-in-1 Charger ×1
Remote Controller ×1
Data cable ×3
Carrying case ×1
Backpack for accessories ×1
Towel ×1
23.6X1.8 O-rings ×2
19X1.8 O-rings ×4
12.5X1.5 O-rings ×4
M3X8 Combination screw ×10
M3X8 Machine screw ×5
M5 small flat washer ×6
M5 spring washer ×6
Cross/Hexagon dual-purpose screwdriver ×1
Flat wrench ×1
Sealing cover of the tether socket ×1
Sealing cover of the peripheral socket ×2
Thruster shield ×8
Left/Right floodlight Spare parts for mounting support ×2
Information Kit ×1
300Wh Battery ×2
CHASING M2 PRO MAX is an Industrial grade underwater remote operated vehicle (ROV) designed for Government and enterprise users.
It adopts new generation of accessories mounting method, quick assembly and disassembly technology, shore based power supply and external floodlights provide easier-to-use, more professional, and more reliable underwater solutions for various industrial applications.
Product Specifications
CHASING M2 PRO MAX
Maximum Depth
200m
Video Maximum Stream
60M
Maximum Battery Life
＞4h
Micro SD Card Memory
128G
Maximum Image Resolution
12 M
Normal Video
FHD: 1920 x 1080 (1080p) 30 / 60 / 120 fps
ROV
Size
608 x 294 x 196 mm (Excluding the floodlight)
Weight
≈8 KG
Maximum Depth
200m
Pull (forward / drift upwards / traverse)
5.7 / 4.0 / 3.6 KG
Maximum Battery Life
＞4h
Battery
302.4Wh
Operating Temperature
-10 ℃ ~ 45 ℃
E-Reel
Size
296x189x279 mm
Weight
3.5 KG
Max Storage Length
200 meters
Battery Capacity
4800 mAh
Number of Cycles
>300 times
Runtime
30 times
Wiping Speed
3 gears
Take-Up Speed (200m)
Fast speed 220 s Low speed 9 min
Operating Temperature
-10℃~45℃
Charging Time
2 H (12 V ) / 4 H (25.2 V)
Remote Controller
Size
160 x 155 x 125 mm
Weight
685 g
Battery Capacity
2500 mAh
Battery Life
≥6H (Depend on working condition)
Wi-Fi
Support
HDMI
support
USB
support
Phone / Tablet Clip
Maximum support 10 inches
LED Lights
Brightness
2 x 4000 lm
Color Temperature
5000 K ~ 5500 K
CRI
85
Dimming
Three adjustable
Sensor
IMU
Three-axis gyroscope acceleration compass
Depth Sensor
＜±0.25 m
Temperature Sensor
＜±2 ℃
Adapter
Adapter
8 A / 25.2 V
ROV Charging Time
2.5 H
Remote Controller Charging Time
2 H
Camera
CMOS
1/2.3’’
Aperture
f/1.8
Focal Length
0.3m~∞
ISO Range
100-6400
Field of View
150°
Maximum Image Resolution
12 M
Image File Types
JPEG / DNG
Normal Video
UHD: 3840 x 2160 (4K) 30 fps FHD: 1920 x 1080 (1080p) 30 / 60 / 120 fps
Slow Motion Video
720p: 8x (240fps) 1080p: 4x (120fps)
Time-Lapse Video
4K / 1080p
Video Maximum Stream
60 M
Video Type
MP4
Micro SD Card Memory
128 G
In The Box:
Drone (Excl Battery) ×1
Shorebase Power Supply System ×1
Charging cable & 3-in-1 Charger ×1
Remote Controller ×1
Data cable ×3
Carrying case ×1
Backpack for accessories ×1
Towel ×1
23.6X1.8 O-rings ×2
19X1.8 O-rings ×4
12.5X1.5 O-rings ×4
M3X8 Combination screw ×10
M3X8 Machine screw ×5
M5 small flat washer ×6
M5 spring washer ×6
Cross/Hexagon dual-purpose screwdriver ×1
Flat wrench ×1
Sealing cover of the tether socket ×1
Sealing cover of the peripheral socket ×2
Thruster shield ×8
Left/Right floodlight Spare parts for mounting support ×2
Information Kit ×1
Experience effortless ocean fishing with the Poseidon 2 PRO BLACK. This drone can cast baits and long lines up to 1km, even in 28kn+ winds. It's also fast and capable of lifting 2.8kg, making it the perfect tool for shore-based anglers to explore deeper waters. Simple to calibrate, with an intuitive app that allows for auto-casting and precise control - the Poseidon PRO BLACK will provide you with an unparalleled fishing experience.
The Poseidon II PRO BLACK is the ultimate drone fishing experience! Featuring an auto cast feature, the drone will fly to your desired destination, drop its payload, and return home autonomously. The accompanying app, available for Apple and Android phones, is user-friendly and provides the user with important data such as distance, height, speed, and battery power. Download the app for free now!
The Poseidon II PRO BLACK is an intelligent water-resistant drone, designed specifically for fishermen. Featuring an IPX water resistance rating, innovative water-resistant structure, Nano waterproof treatment, and high-end light anti-corrosion material, it can handle even the toughest marine environments and withstand prolonged use in corrosive saltwater and heavy rain.
The Poseidon II PRO BLACK offers efficient and secure bait releases with its unique Mechanical Line Release system. The mechanical release ensures you can quickly and effortlessly release your bait each time with reliable results.
Water Resistance – IPX5 Water & Weather Resistant
Image transmission distance – 1000m
Diagonal size (without propeller) – 480mm
Propeller blade size – 13 Inch Carbon Fibre
Maximum horizontal flight speed – 18m/s
Satellite positioning module – UBX-M8030-KT GPS / GLONASS receiver
Safe Wind Speed – 25 knots
Maximum Payload Weight – 2.8KG
Maximum Flight time(No load) – 30min
Maximum Flight time( Load 1kg) – 22min
Maximum Flight time( Load 2.5kg) – 9.5min
Camera parameters – 4K Video
Flight Control System – IDF-9
Propellers specially made for DJI Mini 3 produce less noise and provide higher aerodynamic efficiency and powerful thrust to the aircraft.
Product Description
Propellers specially made for DJI Mini 3 produce less noise and have undergone precise dynamic balancing tests to provide higher aerodynamic efficiency and powerful thrust to the aircraft.
Follow the instructions and attach propellers to the correct frame arms.When changing propellers, use the propellers in the same package. Do not mix propellers from different packages.
Compatibility
DJI Mini 3
Product Specifications
Diameter × Thread Pitch: 6.0 × 3.0 inchWeight (each): 0.9 g
In The Box
Propellers (pair) × 2Screws × 12
