3 Wire ACC Hardwire Kit for A139 3CH/2CH with USB-C > Parking Mode function will turns on automatically through detecting ACC signal when the car is turned off > 4 different adjustable Voltage for battery drain protection > TYPE-C USB connector

Read more less

VIOFO MT1 Motorcycle Dash Cam Front and Rear 1080P Dual Channel Waterproof Motorbike Camera 170 Degree Angle, Built-in WiFi, GPS, G-Sensor, Waterproof, Auto On/Off, 32GB SD Card Included 170° Wide Angle Dual Recording, Built-in Sony STARVIS Sensor on dual cameras, MT1 motorcycle dash cam captures every clear moment for front and rear road at 1080P 30pfs even in low light condition , 170° super wide angle lens reduces the blind spots and captures more details, to reserve the real scene. IP66 Water & Dust Resistant, adopt effective IP66 class protection from water and dust, it still has good performance even in heavy rain and any other hard conditions. All the parts of the motorcycle dashcam and lens are waterproof. Built in Wi-Fi & GPS, Connect to VIOFO APP via Wi-Fi, easily to view real-time video, check GPS route, download video and change settings on your phone. GPS can log the current speed and location, also automatically correct the time by synchronizing with the satellite. Timestamp can be embedded in the video. Remote Control & Auto Turn On/Off, the remote control can start manual emergency recording and control Wi-Fi connection, it has a built-in microphone to realizes audio recording. The MT1 power cable has the ACC detection function to automatically start/stop when the engine is on/off, no need to manually open it, convenient and fast. Perfect Choice for Motorcycle, Clear night vision, special stealth design, emergency recording (G-sensor), loop recording, super capacitor, WDR, support up to 256GB memory card.  

Read more less

This handyÊaccessory for the ViofoÊA129/A129 PROÊdash cams is designed to help the driver to easily tag important videos and lock them from getting overwritten with one simple press on the remote, without needing to take your eyes off the road. Just mount the Viofo Bluetooth Remote anywhere on your dashboard, pair it with the camera (once only) and use it to activate the "Emergency Recording" functionality to save the current file being recorded from being overwritten. No more searching for the right button to press on your A129 dash camera while your driving! This remote is compatible with all the A129 dash cam range, including theÊA129,ÊA129 PRO, A129 IR models both Single and Duo editions. *Please note that it is not compatible with the earlier A119 series or other Viofo cameras.Compatible with A129 series dash camsLock the current image and video clips Free extra battery included

Read more less

Sophisticated Attachments 4 Hours Runtime Anti-Stuck Motor Direct-Connect Remote Controller Removable SD Card Dive To 330ft 4K UHD EIS Camera User Friendly Interaction     GLADIUS MINI S is a portable, easy-to-use, and reliable consumer-grade underwater drone that can be used for underwater creative photography, diving explorations, and safety inspections. It is easy to operate and carry, and has a compact aluminum alloy body design. More Mounts, More Adventures Support Accessory Mounting, More Ways to Play GLADIUS MINI S underwater drone supports the mounting of a grabber claw, sports cameras, and more. More ways to play, more fun. Patented Motor Effectively Reduces the Chance of Being Stuck The patented anti-stuck motor technology greatly reduces the probability of the motor getting stuck in the sand, and it works safely and reliably in all kinds of complicated underwater environments. Direct-Connect Remote Controller, No Disconnections The remote controller supports Wi-Fi and data transfer cable connections to mobile phone/tablet devices, and wired transmission is more stable, which completely solves the problem of Wi-Fi disconnection during use. High Capacity Battery, Runtime up to 4 Hours Equipped with two 4800 mAh batteries. The battery life of GLADIUS MINI S is up to 4 hours. 100m x 200m Shooting Range, 4 Knots Maximum Speed With a maximum speed of 4 knots (2 m/s), a maximum dive depth of up to 100 meters, and a maximum horizontal shooting radius of up to 200 meters, GLADIUS MINI S underwater drone fully meets your underwater shooting needs. 100 meters Maximum working depth 4 knots Maximum speed 4 hours Runtime 4K+EIS Image Stabilization Camera Equipped with a 1/2.3 SONY CMOS, EIS anti video-shake feature, F1.8 lens, and 2400 lumen LED lights, GLADIUS MINI S underwater drone can clearly capture underwater details even in low light. 4K Video resolution 12M Max.photo resolution 152° FOV F1.8 Lens Real-time Recording of Depth and Temperature Data Real-time return of underwater temperature, depth, and other parameters from GLADIUS MINI S provide you with underwater data support. Small, Portable, and Travels Easily GLADIUS MINI S inherits the streamlined body design, and is small and lightweight. Fits easily in a backpack so you can easily take it anywhere you want to go. Size: 400*226*145 mm ｜ Weight: 2.7 kg User Friendly Interaction Live broadcast Social media sharing HDMI output Time-lapse photography Slow motion Quick editing features Simultaneous Three-Device Sharing GLADIUS MINI S supports viewing underwater images on three devices simultaneously to meet the need for multiple viewers. Removable SD Memory Card, Downloaded Anytime and Anywhere The built-in 64G SD memory card is removable for easy downloads anytime and anywhere.   Product Specifications Max Depth 330 ft (100 m) Video Stream 60 M Tether Length 328 ft (100 m) / 656 ft (200 m) SD CARD 64 G Video 3840 x 2160 (Ultra-High Definition) Max Resolution 12 MEG DRONE SIZE400*226*145 mm WEIGHT6 lbs MAX DEPTH330 ft MAX SPEED2 m/s (4 Kn) RUNTIME4 H (Calm water)1 H (Maximum speed & light) BATTERY4800 mAh × 2 OPERATING TEMPERATURE-10℃~45℃ REMOTE CONTROLLER SIZE160 * 155 * 125 mm WEIGHT685 g BATTERY2500 mAh RUNTIME≥6H (according to condition) WIRELESSWi-Fi supported DIRECT-CONNECT RC TYPELightning, Micro USB, USB-C HDMISupport PHONE / PADMaximum screen 13 inch CAMERA CMOS1/2.3 LENSF1.8 FOCUS1 m ISO RANGE 100-6400 FOV152° MAX RESOLUTION12 MEG FORMATJPEG / DNG VIDEOUHD：3840*2160（4K）30fpsFHD：1920*1080（1080p）30/60/120fps SLOW MOTION720p：8x (240fps)1080p：4x (120fps) TIME LAPSE4K/1080p supported VIDEO STREAM60 M VIDEO FORMATMP4 SD CARD64 G SENSOR IMU3 axis gyro / accelerometer / compass DEPTH SENSOR≤ ± 0.25 m TEMPERATURE SENSOR≤ ± 2 ℃ CHARGER POWER3A / 12.6V ROV CHARGING TIME3.5 H RC CHARGING TIME2 H LED BRIGHTNESS2 x 1200 Lumens COLOR TEMPERATURE5000K - 5500K CRI85 DIMMINGTHREE GEARS     

Read more less

QUAD LOCK MOTORCYCLE FORK STEM MOUNT The Quad Lock Fork Stem Mounts are designed for motorcycles that require mounting in the tube of the fork stem. Both Quad Lock Fork Stem Mounts are compatible with all Quad Lock Cases and the Quad Lock Universal Adaptor. STRONG & SECURE The patented dual-stage locking mechanism ensures that your smartphone will stay strong and secure as you ride. QUICK & EASY TO ATTACH / DETACH No fumbling with tricky grips. Use one hand to quickly attach and detach your smartphone from either of the Quad Lock Fork Stem Mounts. OPTIMAL VIEWING ANGLE Use the provided Allen (Hex) Key to set the optimal height and viewing angle. Please Note: Case not included but can be purchased as a kit here

Read more less

Integrate Quad Lock® with your existing motorcycle RAM mount using the Quad Lock® 1” Ball Adaptor Mount. Product Description Integrate Quad Lock® with your existing motorcycle RAM mount using the Quad Lock® 1” Ball Adaptor Mount. SUPER STRONG MOUNTING The strong, patented dual-stage lock means you can ride with confidence knowing that your phone is secured to your motorbike without the need for cumbersome lanyards, straps, bands or magnets. No matter the terrain. Use your existing 1” RAM socket arm to securely grip the 1” Rubber Ball Adaptor. QUICK TO ATTACH / DETACH No tools needed. The familiar 1” Ball Adaptor makes it quick and easy to install to your existing 1” RAM socket arm at a viewing angle that suits you. Simply twist and lock to attach your phone. Use the lever and twist to detach. MINIMALISTIC DESIGN Reduce the size of your current mount so that your phone sits discreetly on your motorcycle in either portrait or landscape mode. PLEASE NOTE: Quad Lock Case and 1” Socket Arm Not Included Compatible with all Quad Lock® Cases and the Universal Adaptor Compatible with 1" RAM Socket Arm Glass filled nylon Stainless steel hardware

Read more less

  QUAD LOCK MOTORCYCLE / SCOOTER MIRROR MOUNT The Quad Lock Mirror Mount allows you to securely mount your smartphone to standard motorcycle and scooter mirror stems. Compatible with all the Quad Lock cases and the Universal Adaptor, this mirror mount is the perfect solution for the Scooter or Motorcycle user on-the-go. The robust design means you can securely clamp your mount to the mirror arm and use the indexing head to achieve the perfect angle. With your phone securely mounted to your motorcycle or scooter, you can use navigation apps to guide you to your location with ease and always Stay Connected. Secure - Patented Dual Stage Locking Mount Convenient - Use Navigation Apps on the go Discrete - Small mount size Suits stem sizes 10, 12, 14 & 16mm Compatible with all Quad Lock Cases and the Universal Adaptor The Quad Lock Motorcycle Mount is compatible with all Quad Lock cases including the Quad Lock Universal Adapter NOTE: Case NOT included but can be purchased separately.

Read more less

With 1500 peak amps, the SL1489 jump starter is perfect for 8.0L gas and 6.0L diesel engines. It delivers superior jump starting performance, due to its advanced 4-cell lithium technology. It will get you started, even at temperatures as low as -10¡ F. Product Description Pre-Boost technology for ultimate cold temperature starting Worry-Free Smart Clamp provides protection with 6 safety features 40x Jump Starts 10W wireless charging 2.4A USB Port 2X faster charging 3.0A USB port 4X faster charging Built-In Light 3 mode ultra-bright LED light Extra-large display Schu Eco Energy meets the highest industry standards for energy efficiency

Read more less

Whistler WR-PCH Hardwire Kit for Whistler Radar Detector Features: Length: 10' 2 amp inline fuse Centre tip positive

Read more less

The WS1065 stores up to 1,800 frequencies and lets you search for nearby frequency transmissions and automatically jump to a found transmission. Plus, it lets you hear storm reports and more before they are broadcast on TV or radio. Product Description Alert LED - Programmable multi-color LED can be configured to illuminate or flash when certain objects are active. Eight user-defined colors can be specified from thousands of possible combinations. Audible Alarms - Programmable audible alarms can be configured to sound when certain Scannable Objects are active. Can be used in conjunction with, or separately from, the Alert LED described above. Automatic Adaptive Digital Tracking - When monitoring P25 digital systems, instantly adapts the digital decoder to the digital modulation format of the transmitted signal, then analyzes the signal over 50 times each second and adapts to any subtle changes caused by multipath or fading. No cumbersome manual adjustments are required. Backlit Liquid Crystal Display - Easy to read and program data even in low light situations. Data Cloning - Allows transfer of the programmed data to another WS1010 scanner. Digital AGC - Instantly compensates for low user audio levels that are common on digital systems. Flexible Antenna with BNC Connector - Provides reception of strong local signals. Also connect an external antenna for improved reception of distant or weak signals. Free-Form Memory Organization - Allocation of memory dynamically and efficiently as it is needed. This differs from low cost and older scanners that had memory organized in rigid and wasteful memory banks. High Speed PC Interface - Use a USB Scanner programming cable for full duplex mode at 6 times the speed of previous scanner models for PC transfer and 8 times the speed of previous models for radio to radio cloning. High speed special USB to scanner programming cable included. Clones with another WS1040 handheld or with another WS1065 desktop/mobile scanner. Key Lock - Lock the scanner’s keys to help prevent accidentally changing the scanner’s programming. Lock-out Function - Skip over specified channels or frequencies when scanning or searching.

Read more less

Compatibility Sony: Cyber-shot DSC-HX30V, Cyber-shot DSCH10, Cyber-shot DSCH20, Cyber-shot DSCH3B, Cyber-shot DSCH50, Cyber-shot DSCH7S, Cyber-shot DSCH90, Cyber-shot DSCH9B, Cyber-shot DSCHS5 Cyber-shot DSCHX100V, Cyber-shot DSCHX20V, Cyber-shot DSCHX5, Cyber-shot DSCHX7V Cyber-shot DSCW100, Cyber-shot DSCW110, Cyber-shot DSCW115, Cyber-shot DSCW120, Cyber-shot DSCW130, Cyber-shot DSCW150, Cyber-shot DSCW170, Cyber-shot DSCW200, Cyber-shot DSCW220, Cyber-shot DSCW230, Cyber-shot DSCW270, Cyber-shot DSCW275, Cyber-shot DSCW290, Cyber-shot DSCW30, Cyber-shot DSCW300, Cyber-shot DSCW35 , Cyber-shot DSCW40, Cyber-shot DSCW50, Cyber-shot DSCW55, Cyber-shot DSCW70, Cyber-shot DSCW80, Cyber-shot DSCW90, Cyber-shot DSCWX1

Read more less

Overview Boasts fast-charging power output of 200 W, and can connect the DJI Power-series power station to charge DJI Inspire 3 batteries. It takes approx. 44 minutes to charge one DJI Inspire 3 TB51 Intelligent Battery from 0% to 100% and 28 minutes to charge from 10% to 95%. Tips After a flight, the battery temperature may be high and potentially outside the permissible temperature range for immediate charging. In such cases, it is recommended to wait until the battery temperature drops below 40° C (104° F) before initiating a charge. In The Box DJI Power SDC to DJI Inspire 3 Fast Charge Cable × 1 Specifications Length: 40 cm Compatibility DJI Power 1000 DJI Power 500 DJI Inspire 3

Read more less

Overview Boasts fast-charging power output of 125 W, and can connect the DJI Power-series power station to charge DJI Air 3 batteries. It takes approx. 44 minutes to charge one DJI Air 3 Intelligent Flight Battery from 0% to 100% and 30 minutes to charge from 10% to 95%. Tips After a flight, the battery temperature may be high and potentially outside the permissible temperature range for immediate charging. In such cases, it is recommended to wait until the battery temperature drops below 40° C (104° F) before initiating a charge. In The Box DJI Power SDC to DJI Air 3 Fast Charge Cable × 1 Specifications Length: 40 cm Compatibility DJI Power 1000 DJI Power 500 DJI Air 3

Read more less

Overview Boasts fast-charging power output of 150 W, and can connect the DJI Power-series power station to charge DJI Mavic 3 series batteries. It takes approx. 58 minutes to charge one DJI Mavic 3 Series Intelligent Flight Battery from 0% to 100% and 32 minutes to charge from 10% to 95%. Tips After a flight, the battery temperature may be high and potentially outside the permissible temperature range for immediate charging. In such cases, it is recommended to wait until the battery temperature drops below 40° C (104° F) before initiating a charge. *Actual appearance of certain accessories may vary. In The Box DJI Power SDC to DJI Mavic 3 Series Fast Charge Cable × 1 Specifications Length: 40 cm Compatibility DJI Power 1000 DJI Power 500 DJI Mavic 3 Series DJI Mavic 3 Classic DJI Mavic 3 Pro Series DJI Mavic 3 Enterprise Series DJI Mavic 3 Multispectral Edition

Read more less

Overview Boasts fast-charging power output of 230 W, and can connect the DJI Power-series power station to charge DJI Matrice 30 series batteries. It takes approx. 47 minutes to charge one Matrice 30 Series TB30 Intelligent Flight Battery from 0% to 100% and 32 minutes to charge from 10% to 95%. Tips After a flight, the battery temperature may be high and potentially outside the permissible temperature range for immediate charging. In such cases, it is recommended to wait until the battery temperature drops below 40° C (104° F) before initiating a charge. In The Box DJI Power SDC to Matrice 30 Series Fast Charge Cable × 1 Specifications Length: 40 cm Compatibility DJI Power 1000 DJI Power 500 DJI Matrice 30 Series

Read more less

The DJI Avata 2 ND Filters Set includes ND8, ND16, and ND32 filers. By selecting the appropriate filter, you gain more freedom in controlling the aperture and shutter speed, capturing stunning shots like motion blur. Compatibility DJI Avata 2  IN THE BOX ND8 Filter × 1ND16 Filter × 1ND32 Filter × 1

Read more less

Provides storage, charging, and power accumulation for batteries. Paired with the DJI 65W Portable Charger, it can fully charge an Intelligent Flight Battery in only 45 minutes. It can sequentially charge three batteries at a time, eliminating the hassle of charging batteries one by one. It can also serve as a mobile power bank to charge devices like the DJI Goggles and smartphones. Compatibility DJI Avata 2  PRODUCT SPECIFICATIONS Input: 5-20 V, max 3 AInput (Power Accumulation): Max 65 WOutput (Charging): Max 17 VOutput (USB): 5 V, 2 ACharging Method: Three batteries charged in sequenceRecommended Chargers: DJI 65W Portable Charger, DJI 65W Car Charger, or other USB Power Delivery chargers

Read more less

IMMERSIVE MOTION CONTROL  When used with DJI Goggles 3, the drone's motion responds to your wrist movements. Combined with DJI RC Motion 3's robust anti-interference capability, you can achieve precise "point-to-fly" control.  QUICK CONTROL WITH AR CURSOR  When used with DJI Goggles 3, you can use the RC to control an AR cursor and navigate the menu on the goggles' screen. Enabling functions, and adjusting camera settings has never been more intuitive and efficient.  COMPACT AND PORTABLE, FEATURE RICH  Light and portable, DJI RC Motion 3 features a streamlined design for a comfortable grip. A natural layout of various function buttons on its compact body enables you to perform takeoffs, stops, and mode switches with just a 'push' of your finger. Tips Using DJI RC Motion 3 alone cannot control the drone. It requires pairing with DJI Goggles 3. Compatibility DJI Avata 2 DJI Mini 4 Pro DJI Air 3 DJI Goggles 3 IN THE BOX DJI RC Motion 3 × 1DJI RC Motion 3 Lanyard × 1

Read more less

The LiDAR boasts 76,800 ranging points, a leap of 77% in quantity, sharpening human-subject edge detection while effectively reducing focus hunting. The max focus distance is 20 meters, and the human-subject focus distance is approximately three times that of the previous generation, effortlessly‌ handling long-distance focusing with telephoto lenses. The 70° FOV is beneficial for edge compositions and close-up shots, providing a larger framing space. The LiDAR refresh rate of 30 Hz allows for faster subject information collection, ensuring more confident focusing on moving subjects. When paired with the DJI Focus Pro Motor, the LiDAR can enable autofocus for manual lenses that have been calibrated. Tips When the stabilizer's screen is in 1x mode, the LiDAR's ToF sensor operates within a 10-meter sensing range by default. To extend to a 20-meter focus distance, you can tap the + icon on the screen to enable 2x zoom display. In The Box Focus Pro LiDAR × 1 Multi-Camera Control Cable (USB-C, 30 cm) × 1 Specifications Ranging Points: 76,800 Sensing Range: 0.5-20 m FOV: Wide-Angle Mode: 65° (horizontal), 40° (vertical), 76.1° (diagonal) Telephoto Mode: 20° (horizontal), 20° (vertical), 28.3° (diagonal) Frame Rate: 30fps Equivalent Focal Length: 30 mm (wide-angle mode) Ranging Accuracy: ±1% to 3% (affected by the distance) ‌Power Consumption: Average approx. 6.3 W, max 6.8 W Input Voltage: 6.6-17.2 V Operating Temperature: -20° to 45° C (-4° to 113° F) Main Body Dimensions: 68×25×57 mm (L×W×H) Weight: 140 g Compatibility DJI RS 4 Pro DJI RS 3 Pro DJI Focus Pro Grip

Read more less

The motor speed has increased by 30% for more responsive control over focus, zoom, and aperture. The motor is compatible with 15mm universal rods. The latency is as low as 10 milliseconds, ensuring swift control response when paired with the DJI Focus Pro Hand Unit. The motor features a built-in RF antenna that allows for linking with the DJI Focus Pro Hand Unit. When paired with the DJI Focus Pro Grip, the grip can power the motor via the USB-C port. Tips The motor can be powered through third-party devices. Do not use an extra device to power the DJI Focus Pro Motor when it is already powered (e.g., by the DJI Focus Pro Grip), as this may cause device damage. DJI RS 4 Pro can be used with up to two motors simultaneously, while DJI RS 4 only supports one motor. In The Box Focus Pro Motor × 1 Motor Rod Mount Kit × 1 Focus Gear Strip × 1 Multi-Camera Control Cable (USB-C, 30 cm) × 1 FIZ Sticker × 1‌ 15mm Rod × 1 10mm 1/4"-20 Screw × 2 Specifications 2.4GHz Transmitter Power (EIRP): ‌< 20 dBm (CE/SRRC/MIC), < 26 dBm (FCC) 2.4GHz Transmission Distance: 160 m*/100 m** ‌* Measured under FCC standard in an unobstructed environment free of interference. ‌‌‌‌** Measured under CE/SRRC/MIC standards in an unobstructed environment free of interference. Dimensions: 100×61×34 mm (L×W×H) Weight: 123 g Rod Diameter: 15 mm Output Gear Teeth: 30 Output Gear Module: 0.8 Compatibility DJI RS 4 Pro DJI RS 4 DJI RS 3 Pro DJI RS 3 DJI Focus Pro Grip DJI Focus Pro Hand Unit DJI Ronin 4D Flex

Read more less

FEATURES The lower quick-release plate features a scale on both sides and a serrated slot design on the bottom. This complements the fine-tuning knob on the gimbal's tilt axis, allowing cinematographers to perform precise, millimeter-level adjustments when changing cameras or lenses. It also facilitates a swift transition between tripods and stabilizers for the camera. CompatibilityDJI RS 4 ProDJI RS 4DJI RS 3 ProDJI RS 3DJI RS 2 PRODUCT SPECIFICATIONS Weight: 80 gDimensions: 129.6×49.5×22 mm (L×W×H)

Read more less

The lower quick-release plate features a scale on both sides and a serrated slot design on the bottom. This complements the fine-tuning knob on the gimbal's tilt axis, allowing cinematographers to perform precise, millimeter-level adjustments when changing cameras or lenses. It also facilitates a swift transition between tripods and stabilizers for the camera. In The Box Lower Quick-Release Plate × 1 Specifications Weight: 70 g Dimensions: 113×49.5×22 mm (L×W×H) Compatibility DJI RS 4 DJI RS 3 DJI RS 2

Read more less

‌The upper quick-release plate has added an adjustable placement guide, which fits flush against the bottom of the camera to serve as a stopper. Even when used with a single 1/4" screw, it can secure the camera in place, preventing loosening or shifting. CompatibilityDJI RS 4 ProDJI RS 4DJI RS 3 ProDJI RS 3DJI RS 2 PRODUCT SPECIFICATIONS Weight: 32 gDimensions: 55×38×16.3 mm (L×W×H)

Read more less

The battery grip can power DJI RS 4 Pro for up to 29 hours or DJI RS 4 for up to 29.5 hours. It also supports powering your camera and accessories with up to 18 watts via the USB-C port at the bottom, catering to prolonged creative sessions. In The Box RS BG70 High-Capacity Battery Grip × 1 Specifications Charging Input Voltage: 16.8 V ⎓ 4 A Rated Capacity: 4800 mAh Rated Energy: 69.12 Wh Compatibility DJI RS 4 Pro DJI RS 4 DJI RS 3 Pro DJI RS 3

Read more less