When a DJI Power-series power station is connected to the DJI Power Solar Panel Adapter Module (MPPT), users can link solar panels through the XT60 interface on the adapter panel for eco-friendly recharging of the DJI Power series. It is recommended to use the DJI Power-series power stations in conjunction with solar panels from the DJI-certified brand Zignes. If using solar panels from other brands, using the MPPT module and a conversion of the solar panel port to the XT60 interface are necessary to enable solar recharging for the DJI Power series.
* Required accessories are sold separately.
Tips
1. One MPPT module can connect to up to three solar panels.
2. To use solar panels not officially recommended by DJI, and to prevent damage to the MPPT module and the power station, ensure the open-circuit voltage of the solar panel is less than 30 V. The power output of each solar panel should not exceed 200 W, with the total output power of solar panels connected to the entire MPPT module capped at 400 W.
3. While using solar panels with the MPPT module, install the included metal heat dissipation bracket.
4. When used with the DJI Power 500, the max output power of the solar panels connected to the entire adapter module should not exceed 300 W.
In The Box
DJI Power Solar Panel Adapter Module (MPPT) × 1
Metal Heat Dissipation Bracket × 2
Ball-End Hex Key × 1
10mm Screw × 3
20mm Screw × 3
Specifications
Total Output:
Single Channel:
Max 200 W
Triple Channels:
Max 400 W (with DJI Power 1000)
Max 300 W (with DJI Power 500)
Input Voltage: 12-30 V, DC
Max Input Current:
Single Channel: 10 A
Triple Channels: 20 A
Operating Temperature: -10° to 45° C (41° to 113° F)
Compatibility
DJI Power 1000 V2
DJI Power 2000
DJI Power 1000
DJI Power 500
Overview
Designed for storing DJI Power 1000, it is convenient for single-handed carrying. The back has a dedicated space for cable management, which makes it user-friendly. Additionally, the left and right handles are equipped with venting openings. With the zipper opened, there's no need to remove the DJI Power 1000 from the case to operate it.
It also features a flip-up design at the panel location of DJI Power 1000, which covers the power ports to protect against accidental splashes and raindrops.
In The Box
DJI Power 1000 Protective Storage Bag × 1
Specifications
Dimensions: 452×240×232 mm (L×W×H)
Compatibility
DJI Power 1000
DJI Power 1000 V2
Overview
To connect car power outlet to SDC or SDC Lite port on a DJI Power-series power station for charging the latter after the car starts.
The accessory described comes in two parts: one XT60 to SDC Module, and one Car Power Outlet to XT60 Power Cable. The XT60 to SDC Module can also act as a solar panel adapter module (MPPT), suitable for connecting one Zignes 100W/120W Solar Panel.
In The Box
XT60 to SDC Module × 1
Car Power Outlet to XT60 Power Cable × 1
Specifications
Input specification: 12-30 V, DC
Max Output Power: 65 W
Operating Temperature: -10° to 45° C (14° to 113° F)
Compatibility
DJI Power 1000
DJI Power 500
Overview
The Zignes solar panel leverages solar energy to eco-recharge the DJI Power-series power stations, with a single panel reaching a max charging output of 120 W.
Featuring a foldable design, it is convenient to store and transport, and comes with a stand for easy setup without the need for additional supports.
It includes a 3m extension cable, allowing users to freely position it in well-lit areas for flexible placement.
Designed with an IP65 rating for dust and water resistance, it accommodates a variety of everyday use scenarios.
Tips
Zignes 120W Solar Panel requires the use of a DJI Power Solar Panel Adapter Module (MPPT) or a DJI Power Car Power Outlet to SDC Power Cable (12V/24V)
for connection to the DJI Power-series power stations. Purchase the accessories as needed.
Each DJI Power Solar Panel Adapter Module (MPPT) can then connect to one to three solar panels, while the DJI Power Car Power Outlet to SDC Power Cable (12V/24V) can connect to one solar panel at most.
After-sales Service:
Return Period: 30 days (from the date of receipt of the package)
Exchange Period: 30 days (from the date of receipt of the package)
Warranty Period: 2 years (for EU regions);
1 year (for other regions)
* After-sales services are provided by DJI.
In The Box
Zignes 120W Solar Panel × 1
Specifications
Rated Power: 120 W
Open-circuit Voltage: Max 26 V
Short-circuit Current: Max 7 A
Weight: Approx. 5.6 kg
Unfolded Dimensions: 1365×580×36 mm (L×W×H)
Folded Dimensions: 365×580×70 mm (L×W×H)
Operating Temperature: -20° to 60° C (-4° to 140° F)
Compatibility
DJI Power Solar Panel Adapter Module (MPPT)
DJI Power Car Power Outlet to SDC Power Cable (12V/24V)
Overview
It connects the DJI Power 1.8kW Solar/Car Super Fast Charger to a car battery.
Tips
1. The 1.8kW Solar/Car Super Fast Charger is suitable for 12V or 24V car systems. The input voltage of the car charging terminals must not exceed 45 V.
2. When using with DJI Power 1000, achieving the 1800W max recharging power requires connecting the power station to a DJI Power Expansion Battery 2000.
In The Box
DJI Power 1.8kW Super Fast Charger 45A Car Charging Cable × 1
Fuse Box × 1
Fuse (60 A) × 1
M2.5 Hex Socket Screw × 3
Specifications
Length: 5 m
Compatibility
DJI Power 1.8kW Solar/Car Super Fast Charger
Overview
Convenient RV Energy Storage, Charge While Driving
The DJI Power 1.8kW Solar/Car Super Fast Charger supports simultaneous connection to solar panels and the RV's alternator, together providing up to 1200 W of solar power and 600 W of continuous car power to quickly recharge [2] DJI Power 1000/2000/1000 V2 [1] and expansion battery [1], reaching 1024 Wh of power during a drive of approximately 40 minutes, [3] and 2048 Wh in 75 minutes, [3] expanding the capacity of your car's electrical system.
It can also connect to the RV battery and reverse-charge it with DJI Power 1000/2000/1000 V2 to prevent battery drain [4], achieving intelligent two-way charging and capacity expansion of the car battery. Additionally, DJI Power 1000/1000 V2 can be paired with the 2048Wh expansion battery [1] to provide 3072 Wh of battery backup and an ultra-high power output of 2400 to 2600 W. [5] DJI Power 2000 can connect up to ten 2048Wh expansion batteries [1], boosting the capacity to an incredible 22,528 Wh. [6]
Solar Power for Eco-Friendly Home Backup Battery
The 1.8 kW Super Fast Charger can connect to solar panels via the XT90 port, [1] to provide a max 1800W[7] solar power to quickly recharge DJI Power 1000/2000/1000 V2, enabling a more eco-friendly and economical home energy storage and usage solution. DJI Power 1000/1000 V2 can be paired with up to five 2048Wh DJI Power Expansion Battery 2000 units, [1] providing up to 11,264 Wh [6] of backup power. DJI Power 2000 can connect up to ten 2048Wh expansion batteries [1], boosting the capacity to an incredible 22,528 Wh. [6] Using the Super Fast Charger and solar panels to fully recharge them ensures you have power even during unexpected outages.
1. Sold separately.
2. At ambient temperatures between 0° to 45° C (32° to 113° F), the 1.8 kW Super Fast Charger can continuously recharge DJI Power 1000/2000/1000 V2 at 600 W via the car's alternator. It can also simultaneously connect to up to 1200W solar panel(s) to recharge DJI Power 1000/2000/1000 V2 with solar power. When using with DJI Power 1000, achieving the 1800W max recharging power requires connecting the power station to a DJI Power Expansion Battery 2000. Data was tested in a controlled laboratory environment.
3. Measured at an ambient temperature of 25° C (77° F) when the 1.8kW Super Fast Charger connects to a 12V or 24V car system and recharges DJI Power 1000/1000 V2 and a DJI Power Expansion Battery 2000 together, or DJI Power 2000 independently, at a max 1200W solar power plus 600W continuous car power. This data is for reference only. Actual user experience may vary. Data was tested in a controlled laboratory environment.
4. The DJI 1.8kW Solar/Car Super Fast Charger can stabilize the car battery voltage at 13.5 V. Depending on the voltage status, it can either recharge DJI Power 1000/2000/1000 V2 (when the voltage is above 13.5 V) or supply power from DJI Power 1000/2000/1000 V2 to the car battery (when the voltage is below 13.5 V).
5. At an ambient temperature of 25° C (77° F), when used with DJI Power 1000 (DYM1000L, the 110V version in the US; DYM1000H, the 220V version in other regions), it can stably output at a maximum continuous power of 2400 W until battery runs out, or supply power at 2600 W for 60 seconds (in the US)/15 minutes (in other regions). Data was tested in a controlled laboratory environment.
6. DJI Power 1000/1000 V2 can connect up to 5 expansion batteries, which provide up to 11,264 Wh when fully charged. DJI Power 2000 can connect up to ten expansion batteries, which provide up to 22,528 Wh when fully charged.
7. The DJI Power 1.8kW Solar/Car Super Fast Charger's MC4 Solar Panel Cable supports up to 1200W solar input. In the meantime, its XT90 Car/Solar Charging Port can be expanded to an MC4 connector using the separately sold DJI Power 1.8kW Super Fast Char
Tips
* Hybrid and fully electric vehicles are currently not compatible with the DJI Power 1.8kW Solar/Car Super Fast Charger, due to differences in generator operation compared to traditional fuel-powered vehicles.
1. The 1.8kW Solar/Car Super Fast Charger is suitable for 12V or 24V car systems. The input voltage of the car charging terminals must not exceed 45 V.
2. After installation in the car, organize and secure the wiring, and ensure all terminal screws are fixed, before driving the vehicle.
3. The 1.8kW Solar/Car Super Fast Charger is not water- or dust-resistant. Take precautions against water and dust during installation.
4. The maximum input voltage for the MC4 Solar Panel Cable is 60 V, and the maximum power is 1200 W.
5. When connecting the Car/Solar Charging Port to solar panels, the maximum input voltage is 45 V, and the maximum power is 600 W. Pay attention to the series and parallel configuration of the solar panels to avoid exceeding port limits.
6. When using with DJI Power 1000/2000/1000 V2, achieving the 1800W max recharging power requires connecting the power station to a DJI Power Expansion Battery 2000.
In The Box
DJI Power 1.8kW Solar/Car Super Fast Charger × 1
DJI Power SDC to SDC Adapter Cable (30A) × 1
M2.5 Hex Socket Screw × 3
M2.5 Hex Key × 1
Specifications
Weight: Approx. 1.2 kg
Dimensions: 260×126×63 mm (L×W×H)
Ports/cables:
SDC Port × 1
Car/Solar Charging Port × 1
MC4 Solar Panel Cable × 1
Input:
MC4 Solar Panel Cable (Input):
Rated: 12-60 V, max current: 20 A, max power: 1200 W*
XT90 Car/Solar Charging Port (Input):
Rated: 12-45 V, max current: 43 A, max power: 600 W*
SDC Port (Output):
40-58.4 V
* Measured in an ambient environment of 25° C (77° F) when being recharged at 60 V and 20 A.
** Measured at an ambient temperature of 25° C (77° F) when connected to a 12V car system with an input of 14 V and 43 A.
*** When using with DJI Power 1000/2000/1000 V2, achieving the 1800W max recharging power requires connecting the power station to a DJI Power Expansion Battery 2000.
Output (Power Supply with Solar Power)
SDC Port (Input):
40-58.4 V
Output (Power Supply with Car Power):
SDC Port (Input):
40-58.4 V
XT90 Car/Solar Charging Port (Output):
12V Car System: 11-14.4 V, 600W max power*
24V Car System: 22-28.8 V, 600W max power*
* At temperatures between 0° to 45° C (32° to 113° F), it can continuously recharge DJI Power 1000 at 600 W via the car's alternator.
Charging Temperature: 0° to 45° C (32° to 113° F)
Power Supply Temperature: -10° to 45° C (14° to 113° F)
Compatibility
DJI Power 1000 V2
DJI Power 2000
DJI Power 1000
1. Sold separately.
2. At ambient temperatures between 0° to 45° C, the 1.8 kW Super Fast Charger can continuously recharge DJI Power 1000 at 600 W via the car's alternator. It can also simultaneously connect to up to 1200W solar panel(s) to recharge the Power 1000 with solar power. When using with DJI Power 1000, achieving the 1800W max recharging power requires connecting the power station to a DJI Power Expansion Battery 2000. Data was tested in a controlled laboratory environment.
3. Measured at an ambient temperature of 25° C (77° F) when the 1.8kW Super Fast Charger connects to a 12V or 24V car system and recharges DJI Power 1000 and a DJI Power Expansion Battery 2000 at a max 1200W solar power plus 600W continuous car power. This data is for reference only. Actual user experience may vary. Data was tested in a controlled laboratory environment.
4. The DJI 1.8kW Solar/Car Super Fast Charger can stabilize the car battery voltage at 13.5 V. Depending on the voltage status, it can either recharge the Power 1000 (when the voltage is above 13.5 V) or supply power from the Power 1000 to the car battery (when the voltage is below 13.5 V).
5. At an ambient temperature of 25° C (77° F), when used with DJI Power 1000 (DYM1000L, the 110V version in the US; DYM1000H, the 220V version in other regions), it can stably output at a maximum continuous power of 2400 W until battery runs out, or supply power at 2600 W for 60 seconds (in the US)/15 minutes (in other regions). Data was tested in a controlled laboratory environment.
6. DJI Power 1000 can connect up to 5 expansion batteries, which provide up to 11264 Wh when fully charged.
7. DJI Power 1.8kW Solar/Car Super Fast Charger's MC4 Solar Panel Cable supports up to 1200W solar input. In the meantime, its XT90 Car/Solar Charging Port can be expanded to an MC4 connector using the separately sold DJI Power 1.8kW Super Fast Charger XT90 to MC4 Adapter Cable, providing an additional 600W solar input. When using with DJI Power 1000, achieving the 1800W max recharging power requires connecting the power station to a DJI Power Expansion Battery 2000.
Overview
The DJI Power Expansion Battery 2000 Mounting Kit allows you to install and secure DJI Power 1000/2000/1000 V2 and expansion battery in your car or other locations. The kit includes vertical linking brackets and mounting straps for securing DJI Power 1000/2000/1000 V2 and expansion battery vertically, and L-shaped mounting brackets for wall mounting the expansion battery.
In The Box
Vertical Linking Bracket × 2
L-shaped Mounting Bracket × 2
Quick-release Screw × 4
Mounting Strap × 2
Specifications
Weight:
Vertical Linking Bracket (each): 300 g
L-shaped Mounting Bracket (each): 117 g
Compatibility
DJI Power 1000 V2
DJI Power 2000
DJI Power 1000
DJI Power Expansion Battery 2000
Overview
During your ride, the DJI Power 1kW Super Fast Car Charger can utilize the excess electricity from the car's alternator to quickly recharge DJI Power 1000/2000/1000 V2 and expansion battery at up to 1000 W*. It can reach 1024 Wh of power during a drive of approximately 78 minutes**, and 2048 Wh in 145 minutes**, thereby expanding the capacity of your car's electrical system. It can also connect to the car battery and reverse-charge it with DJI Power 1000/2000/1000 V2 to prevent battery drain***, achieving intelligent two-way charging and capacity expansion of the car battery.
* At ambient temperatures between 0° to 45° C (32° to 113° F), the 1kW Super Fast Car Charger can recharge DJI Power 1000/2000/1000 V2 at a maximum power of 1000 W via the car's alternator. Data was tested in a controlled laboratory environment.
** Measured at an ambient temperature of 25° C (77° F) when the 1kW Super Fast Car Charger connects to a 12V or 24V car system and recharges either DJI Power 1000/1000 V2 and a DJI Power Expansion Battery 2000 together, or DJI Power 2000 independently, at a maximum power of 1000 W. The expansion battery is sold separately.
*** The 1kW Super Fast Car Charger can stabilize the car battery voltage at 13.5 V. Depending on the voltage status, it can either recharge DJI Power 1000/2000/1000 V2 (when the voltage is above 13.5 V) or supply power from DJI Power 1000/2000/1000 V2 to the car battery (when the voltage is below 13.5 V).
Tips
* Hybrid and fully electric vehicles are currently not compatible with the DJI Power 1kW Super Fast Car Charger, due to differences in generator operation compared to traditional fuel-powered vehicles.
1. The 1kW Super Fast Car Charger is suitable for 12V or 24V car systems. The input voltage of the car charging terminals must not exceed 45 V.
2. After installation in the car, organize and secure the wiring, and ensure all terminal screws are fixed, before driving the vehicle.
3. When installing the cables, it is recommended to first secure the cables of the 1kW Super Fast Car Charger, and then connect the fuse and cables of the car battery, in order to avoid short circuits, which could result in damage to the equipment.
4. The 1kW Super Fast Car Charger is not water or dust-resistant. Take precautions against any exposure to water or dust during installation.
5. To protect your car’s circuitry, the DJI Power 1kW Super Fast Car Charger is set to a default charging power of 500W. You can increase this to 1000W in the app if needed. When using it with DJI Power 1000, the DJI Power Dongle is required to connect to the app.
In The Box
DJI Power 1kW Super Fast Car Charger × 1
DJI Power 1kW Super Fast Charger 70A Car Charging Cable × 1
Fuse Box × 1
Fuse (100 A) × 1
M5 Screw × 1
M4 Screw × 1
Specifications
Weight: Approx. 1.25 kg
Dimensions: 235×93×83.5 mm (L×W×H)
Ports/cables:
Car Charging Terminals (Positive Terminal and Negative Terminal) × 1 pair
SDC Cable × 1
Input:
Car Charging Terminals (Input): 12-45 V, max current: 70 A, max power: 1000 W*
SDC Port (Output): 40-58.4 V
* Measured at an ambient temperature of 25° C (77° F) when connected to a 12V car system with an input of 14.3 V and 70 A.
Output (Power Supply, Car Charging):
SDC Port (Input): 40-58.4 V
Car Charging Terminals (Output):
12V Car System: 11-14.4 V, 1000W max power*
24V Car System: 22-28.8 V, 1000W max power*
* At an ambient temperature of 25° C (77° F), it can recharge DJI Power 1000/2000/1000 V2 at a maximum output power of 1000 W via the car's alternator.
Charging Temperature: 0° to 45° C (32° to 113° F)
Power Supply Temperature: -10° to 45° C (14° to 113° F)
Car Charging Cable Length: 5 m
Compatibility
DJI Power 1000 V2
DJI Power 2000
DJI Power 1000
Overview
The DJI Power Series Hand Truck is designed for moving DJI Power series power station and expansion batteries.
It is equipped with a retaining bar to secure the hand truck with the rear screw holes of the expansion battery.
It also comes with a ratchet strap to secure the power station and expansion battery vertically, creating an integrated unit for easier movement.
Tips
It is recommended to hold a maximum of one power station and two expansion batteries.
In The Box
Hand Truck Base × 1
Handle × 1
Retaining Bar × 1
Specifications
Weight: 4.6 kg
Dimensions: 49×33×98 cm (L×W×H)
Compatibility
DJI Power 1000 V2
DJI Power 2000
DJI Power 1000
DJI Power Expansion Battery 2000
2048Wh(167Ah@12V) High Capacity, 23.5L Compact Size
DJI Power Expansion Battery 2000 offers a 2048Wh(167Ah@12V) capacity, yet its size is comparable to the 1024Wh DJI Power 1000, making it easy to stack and carry.
Flexible Expansion Options
Connect the expansion battery to Power 1000 and Power 1000 V2 [1] via a designated cable, providing up to 11264 Wh of total energy [2]. Pair it with Power 2000 [1] to achieve an impressive up to 22528 Wh.
Higher Capacity, Genuine Power
When used with Power 1000 V2, the expansion battery can provide a maximum continuous output of 3000 W [3]. This ultra-high output power can effortlessly power 99% of daily appliances [4].
Ports On One Side, Easy to Stack and Store
The ports, buttons, and screen are all integrated on the front of the unit. Both sides and the back of the unit have 1/4" threaded holes, making it more convenient to operate and secure the device.
Quality Assurance, Safe and Durable
Allows for 4000 charge cycles [5]. DJI's intelligent Battery Management System ensures proper heat dissipation, and adopts a new sub-nano protective coating technology, allowing the expansion battery to operate safely in conditions such as rain, condensation and salt spray [6].
Faster Charging, Ready When You Need It
Connecting the expansion battery to the power station boosts recharging power and shortens recharging time. With Power 1000, 1024 Wh can be fully recharged in just 36 minutes [7]. When paired with Power 1000 V2, charging power increases to 2200 W, enabling a full charge of 1024 Wh in only 32 minutes [7]. With Power 2000 and simultaneous AC and DC charging, charging power reaches up to 3000 W [7], ensuring fast and reliable power whenever it is needed.
In the Box
DJI Power Expansion Battery 2000
× 1
DJI Power Expansion Battery 2000 Cable
× 1
* The expansion battery must be used with DJI Power 1000, Power 1000 V2 or Power 2000. For Power 1000, update the firmware to the latest version using the DJI Assistant 2 desktop software via a wired connection before using the expansion battery for the first time. DJI Power 1000 V2 or Power 2000 does not require connection to DJI Assistant 2.
1. Sold separately.
2. DJI Power 1000 and Power 1000 V2 each support connection with up to 5 expansion batteries, which provide up to 11264 Wh when fully charged. DJI Power 2000 supports connection with up to 10 expansion batteries, which provide up to 22528 Wh when fully charged.
3. At an ambient temperature of 25° C ( 77° F), when used with DJI Power 1000, it can stably output at a maximum continuous power of 2400 W until battery runs out. The maximum continuous output power is 2200 W when using only DJI Power 1000. When used with DJI Power 1000 V2, it can stably output at a maximum continuous power of 3000 W until battery runs out. The maximum continuous output power is 2600 W when using only DJI Power 1000 V2. Data was tested in a controlled laboratory environment.
4. When used with DJI Power 1000, it can support devices with power consumption not exceeding 2600 W. When used with DJI Power 1000 V2 or DJI Power 2000, it can support devices with power consumption not exceeding 3000 W.
5. Measured at an ambient temperature of 25° C (77° F) when connected to DJI Power 1000, recharged at 500 W, and with a 1000 W output power, the battery maintains over 80% capacity after 4000 cycles. This data is for reference only. Actual user experience may vary.
6. To ensure product performance, it is not recommended to operate the expansion battery in a rainy environment for more than 3 minutes, or expose the expansion battery to condensation or salt fog for extended periods.
7. AC recharging power may vary in different countries. This data is for reference only. Actual user experience may vary.
Notes of "Why Choose DJI Power?" section, for the United States and Canada:
[1] The 2019 DJI Agras series introduced 9‑minute high‑power fast charging, a proven and reliable technology.
[2] Based on publicly available data as of 2025.
[3]All data are current as of 2025.
[4] Data from DJI Power 2000. Product performance may vary; refer to specific product specifications for details.
[5] *US CNN Best No.1 portable power station
https://www.cnn.com/cnn-underscored/reviews/best-product-launches-2025-07-04
*Yanko Design's Best of IFA 2025
https://www.yankodesign.com/2025/09/07/yanko-designs-best-of-ifa-2025-effortless-intelligence-and-design-driven-innovation/
*Certified by the Japan Disaster Prevention Safety Association; ranked No.1 disaster power supply by My Best.
[6] Based on 90th‑percentile transit times. Actual delivery times vary by region and logistics conditions; please consult customer service for specifics.
[7] Up to 5‑year warranty when purchased from the DJI Official Online Store.
[8] Return and exchange policy: https://www.dji.com/service/policy.
[9] Compatible with consumer products, some enterprise models (Matrice 400/350 RTK not supported) and handheld devices.
DJI Power Expansion Battery 2000 SPECS
Weight
Approx. 16.5 kg
Dimensions
448.5×225×234 mm (L×W×H)
Capacity
40 Ah
Ports
SDC Port × 2
Input
Input Voltage: 58.4 VMax Input Current: 60 A
Output
Output Voltage: 40.0-58.4 VMax Output Current: 60 A
Battery Type
LFP (lithium ferrophosphate)
Battery Cycles
Maintains over 80% capacity after 4000 cycles.Measured at an ambient temperature of 25° C when connected to the DJI Power 1000 and being recharged at 500 W and at 1000W output power.
Power Supply Temperature
-10° to 45° C
Recharging Temperature
0° to 45° C
Storage Temperature
-20° to 50° C
Overview
With this cable, a DJI Power-series power station can convert SDC to a car charger plug, providing a 12V DC output to charge devices with car charger sockets, such as car refrigerators, car vacuum cleaners, and similar accessories.
Tips
Actual appearance of certain accessories may vary.
In The Box
DJI Power SDC to Car Charger Plug Power Cable (12V) × 1
Specifications
Length: 40 cm
Compatibility
DJI Power 1000
DJI Power 500
Overview
With this cable, DJI Power-series power stations can achieve 12V DC output, suitable for connecting to model aircraft balance chargers or devices with XT60 connectors.
Tips
Actual appearance of certain accessories may vary.
In The Box
DJI Power SDC to XT60 Power Cable (12V) × 1
Specifications
Length: 40 cm
Compatibility
DJI Power 1000
DJI Power 500
Overview
Boasts fast-charging power output of 200 W, and can connect the DJI Power-series power station to charge DJI Inspire 3 batteries. It takes approx. 44 minutes to charge one DJI Inspire 3 TB51 Intelligent Battery from 0% to 100% and 28 minutes to charge from 10% to 95%.
Tips
After a flight, the battery temperature may be high and potentially outside the permissible temperature range for immediate charging. In such cases, it is recommended to wait until the battery temperature drops below 40° C (104° F) before initiating a charge.
In The Box
DJI Power SDC to DJI Inspire 3 Fast Charge Cable × 1
Specifications
Length: 40 cm
Compatibility
DJI Power 1000
DJI Power 500
DJI Inspire 3
Overview
Boasts fast-charging power output of 125 W, and can connect the DJI Power-series power station to charge DJI Air 3 batteries. It takes approx. 44 minutes to charge one DJI Air 3 Intelligent Flight Battery from 0% to 100% and 30 minutes to charge from 10% to 95%.
Tips
After a flight, the battery temperature may be high and potentially outside the permissible temperature range for immediate charging. In such cases, it is recommended to wait until the battery temperature drops below 40° C (104° F) before initiating a charge.
In The Box
DJI Power SDC to DJI Air 3 Fast Charge Cable × 1
Specifications
Length: 40 cm
Compatibility
DJI Power 1000
DJI Power 500
DJI Air 3
Overview
Boasts fast-charging power output of 150 W, and can connect the DJI Power-series power station to charge DJI Mavic 3 series batteries. It takes approx. 58 minutes to charge one DJI Mavic 3 Series Intelligent Flight Battery from 0% to 100% and 32 minutes to charge from 10% to 95%.
Tips
After a flight, the battery temperature may be high and potentially outside the permissible temperature range for immediate charging. In such cases, it is recommended to wait until the battery temperature drops below 40° C (104° F) before initiating a charge.
*Actual appearance of certain accessories may vary.
In The Box
DJI Power SDC to DJI Mavic 3 Series Fast Charge Cable × 1
Specifications
Length: 40 cm
Compatibility
DJI Power 1000
DJI Power 500
DJI Mavic 3 Series
DJI Mavic 3 Classic
DJI Mavic 3 Pro Series
DJI Mavic 3 Enterprise Series
DJI Mavic 3 Multispectral Edition
Overview
Boasts fast-charging power output of 230 W, and can connect the DJI Power-series power station to charge DJI Matrice 30 series batteries. It takes approx. 47 minutes to charge one Matrice 30 Series TB30 Intelligent Flight Battery from 0% to 100% and 32 minutes to charge from 10% to 95%.
Tips
After a flight, the battery temperature may be high and potentially outside the permissible temperature range for immediate charging. In such cases, it is recommended to wait until the battery temperature drops below 40° C (104° F) before initiating a charge.
In The Box
DJI Power SDC to Matrice 30 Series Fast Charge Cable × 1
Specifications
Length: 40 cm
Compatibility
DJI Power 1000
DJI Power 500
DJI Matrice 30 Series
