110W Lightweight Portable Solar Panel Ultra-Portable Design Built with advanced lightweight materials, this next-generation solar panel weighs just 3.3 kg — 0.7 kg lighter than previous models — making it easy to carry and store. Capture More Energy with a Bifacial Design Featuring a primary panel plus a rear-side panel that captures ambient light, this solar panel delivers up to 122W of output under BNPI test conditions—producing more power from the same amount of sunlight compared to traditional monofacial panels. Powered by industry-leading TOPCon technology, it achieves an exceptional conversion efficiency of up to 25% for faster power station recharging. Built-in XT60 The integrated XT60 cable makes it easy to store and seamless to connect to portable power stations for a faster setup. Built-in XT60 Suitable for Various Environments The integrated folding bracket provides a compact, convenient design and adjusts from 30° to 60°, making it suitable even for most high-latitude locations.*For long-term installations, rigid solar panels are recommended. Lightweight portable panels are not designed for extended hanging use. Integrated Solar Angle Guide Keep sunlight at a 90° angle and concentrate the sun's rays onto the surface of your solar panel to get the most sunshine at all times. Durable and Water-Resistant Built to weather the storm With an IP68 water-resistance rating, our 110W Lightweight Portable Solar Panel maintains its high performance even when in contact with water, so you can safely recharge in wet conditions, such as seaside or on a boat. Never too hot Designed to withstand high temperatures while still ensuring high levels of solar generation. Specs Rated Power -STC 110W（±5W） / BNPI 122W（±5W Cell Type - N Type TOPCon monocrystalline silicon Efficiency -25% Weight (Solar Panel) -3.3kg±0.3kg Dimensions -1944mm*413mm*26mm Folded: 544mm*413mm*36mm Connector Type -XT60I-F Warranty -5 years Open Circuit Voltage - 23.5V（Vmp: 19.5V) Short Circuit Current -STC 6.1A（Imp: 5.9A） - BNPI 6.8A（Imp: 6.5A Waterproof & Dustproof - IP68

Read more less

Capacity: 2048WhCompatibility:  EcoFlow DELTA 3 Max Plus / EcoFlow DELTA 3 Ultra PlusLong-Lasting LFP BatteryEasy to Use - Plug-and-play design for straightforward operation.Stackable Design - Perfect for home or indoor power backup applications. IN THE BOX DELTA 3 Max Plus Smart Extra Battery × 1Extra Battery Cable × 1Manuals & Warranty Card × 1

Read more less

Industry-First 2kWh Power Station with Max 3000W Output All Your Essentials. All at Once. DELTA 3 Max Plus delivers a powerful 3000W output—enough to run your microwave, kettle, fridge, and blender all at once without a flicker. Lunchtime? Go full throttle. No unplugging, no interruptions—just seamless power. [1] Real Power to Explore Everywhere DELTA 3 Max Plus delivers 3000W AC rated output (6000W surge). With X-Boost™ 3.0 technology, it supports devices up to 3900W—effortlessly taking on your heavy-duty appliances. Outdoor & Camping RV & Motorhome Job Site Garden & Backyard 5 Ways to Charge Alternator+Solar Dual Charging Charge on the go with EcoFlow's new Alternator Charger Plus 1000 [3]. Featuring dual input—1000W solar+1000W alternator—ensuring faster, more efficient charging even on the go. Alternator Charging With EcoFlow’s in-vehicle charging accessories — the 500W, 800W, and Alternator Charger Plus 1000 [3] — you can use excess power from your vehicle’s alternator to charge your portable power station up to 10× faster than a standard 12V cigarette lighter socket. Wall/AC Charging With an industry-leading 2300W AC input, you can power up in just 47 minutes. Solar Charging Up to 1000W solar input, class-leading solar charging that gets your power station ready within 2 hours. Generator Charging Hybrid Power with Generator, 0-80% in 47 mins with 2400W AC Input. Stay powered even without sunshine, with app control and compatibility with third-party generators. Industry-First 2kWh Solar Battery with Max 3000W Output 2-10kWh Expandable Capacity Half-Day Power Usage Covers essential power needs during a 4–8 hour outage—keeping food fresh, heat running, lights on, and communication devices charged.[4] 1-Day Power Usage Delivers 1 day of outage protection—ensuring uninterrupted cooking, heating, lighting, and connectivity.[4] 2-Day Power Usage Powers home essentials for up to 2 days [4] with 6kWh capacity—keeping your kitchen running, lights on, and devices connected.[5] *Require connecting 1 × DELTA 3 Max Plus + 2 × DELTA 3 Max Plus Smart Extra Battery with EcoFlow Smart Extra Battery Expansion Adapter. The EcoFlow Extra Battery Expansion Adapter will be released soon. 3-Day Power Usage Supports a family of four through 3 days of everyday living [4] with 10kWh capacity—keeping food fresh, heat running, lights on, and entertainment devices charged.[6] *Require connecting 1 × DELTA 3 Max Plus + 2 × DELTA 3 Max Plus Smart Extra Battery with EcoFlow Smart Extra Battery Expansion Adapter. The EcoFlow Extra Battery Expansion Adapter will be released soon. Deeper Insights, Easier Control Monitor your energy usage, savings, and solar generation—all with one intuitive dashboard. Easily track battery status, real-time electricity rates, and financial savings. Industry-first Smart Output Priority Tech Introduce industry-first Smart Output Priority Tech. Users can take manual remote control of two AC circuits and one DC circuit, or let the Plus models automatically follow the pre-set priority. Reliability & Durability Automotive-Grade Full-Tab LFP Cells Rugged exterior and intelligent BMS for unmatched reliability Specs Dimensions 494 × 242 × 305 mm Net Weight Approx. 22.1 kg Capacity 2048Wh Extra Battery supporting DELTA 2 Max/DELTA 3 Max Plus/DELTA Pro 3/DELTA 3 Extra Battery Max Capacity with Extra Battery up to 10 kWh Total Output Ports 10 AC Output 4*AC outlets, 230v, 3000W(surge 6000W) Output Priority Yes Max Output by X-Boost 3900W X-Fusion Yes USB-A Output (Fast Charge) 1×18W Max USB-C Output 1 × 140W Max(HID); 2 × 45W Max (Total 45W) 12V DC Output 378W Max; Car Power Output × 1:12.6V⎓10A; Anderson Output × 1:12.6V⎓30A AC Charging 2300W（68 min） Solar Charging 1000W Smart Generator Charging (1.8kW) 2400W Max Alternator Charging 1000W Max Car Charging 12V/24V⎓8A Battery Chemistry LFP UPS <10ms WiFi Yes Bluetooth Yes App Yes Noise 600W <25db Warranty 5 years Operating Altitude ≤3000m Discharge Temperature -10 to 45°C Charge Temperature 0-45℃ Storage Temperature -10 to 45°C 1. The conclusion that multiple appliances can be powered simultaneously is based on internal testing. Actual performance may vary in real-world use.2. All charging speed data comes from EcoFlow labs and is for reference only. The actual data may vary slightly depending on the usage environment, device condition, software version, and other factors.3. EcoFlow Alternator Charger Plus 1000 will be launched soon and is sold separately.4. Multiple appliances' backup time based on ideal conditions; actual results may vary.5. Require connecting 1 × DELTA 3 Max Plus + 2 × DELTA 3 Max Plus Smart Extra Battery with EcoFlow Smart Extra Battery Expansion Adapter. The EcoFlow Extra Battery Expansion Adapter will be released soon.6. Require connecting 1 × DELTA 3 Max Plus + 2 × DELTA Pro 3 Smart Extra Battery with EcoFlow Smart Extra Battery Expansion Adapter. The EcoFlow Extra Battery Expansion Adapter will be released soon.  IN THE BOX Delta 3 Max PlusAC Charging CableUser ManualApp quick start guideWarranty Card

Read more less

3 plastic miniatures for the Middle-earth™ Strategy Battle Game Add an ancient, terrifying spider-like creature to your Army of the Great Eye or Cirith Ungol™ army Add the tricksy and treacherous Gollum™ to your Garrison of Ithilien™ army Also includes a webbed, envenomed Frodo™ for use as a marker in your games It is said that a dark terror stalks the mountain pass high above Cirith Ungol, traversing its winding tunnels and hunting any who stray into its domain. This creature is Shelob, the spawn of Ungoliant – a giant, bloated spider that has dwelt within Mordor for millennia. Over the Ages, countless beings have been ensnared in the webs of Shelob. Yet Shelob likes to feed on fresh, warm blood, preferring to inject her prey with a paralysing venom before entangling them in webbing to save for later. This multipart plastic kit builds Gollum, a twisted fighter for your Garrison of Ithilien armies, Shelob, a mighty spider for your Army of the Great Eye and Cirith Ungol armies, and an envenomed Frodo for use in the Middle-earth Strategy Battle Game. The hulking Shelob is a terrifying foe, and a treat for painters and collectors, covered with details that show her age, along with scenic base elements. Gollum shares a similarly rocky scenic base, over which he can be seen creeping. The webbed Frodo miniature can be used as a marker for scenarios found in the Middle-earth Strategy Battle Game Journal: The Treachery of Gollum supplement, which is available separately.This kit comprises 42 plastic components, 1x Citadel 80mm Round Base, and 2x Citadel 25mm Round Bases. These miniatures require assembly and are supplied unpainted – we recommend using Citadel Plastic Glue and Citadel Colour paints.Rules for these miniatures can be found in the Armies of The Lord of the Rings™ and Armies of Middle-earth supplements, both available separately.

Read more less

Fisherman FD1S New upgraded model to the FD1+ Purpose designed Fishing Drone 33% Increased Flight Battery life 2.2 Kg Bait Capacity Now comes with a Smart Flight Battery New Sensors to enhance flight stability Powerful and Easy to Use The SwellPro Fisherman FD1S is a water-resistant fishing drone designed for new drone fisherman in mind, or those who want a powerful and easy to use fishing drone without complications. FD1S does it’s most essential job very well – getting your bait to your fishing spot quickly with no fuss. 2.2KG Bait Capacity 1.3 KM Casting Range IP65 Seawater-resistant Level 7 Wind Resistance Calibration-Free Flight Sensors GPS 9.0 Precise Positioning S6 Flight Controller Slide-in Battery The FD1S will get your baits out further and faster Fisherman FD1S is built for fishing with a toughened body and a large bait capacity.  The FD1S is ready to use straight out of the box, with unrivalled Efficiency and Power. 2.2 KG Bait Capacity The new FD1S’s propulsion system is optimized to provide higher strength and more efficiency than its predecessor, allowing the drone to lift heavier baits of upto 20% more (to 2.2 kg) with astonishing ease. This means that fishermen can take advantage of multiple baits to attract the big fish, and give you confidence that the drone will handle loads reliably in all conditions. Smooth Control ESCs The integration of sine wave ESCs in the FD1S ensures gentle and progressive motor acceleration, increasing stability when the drone starts lifting additional weights off the ground. The precise control provided by these ESCs also allows for delicate maneuvering and stable hovering, which is essential when positioning your baits exactly where you want them. Marinised Motors The motors on the FD1S are marinised meaning they have been developed to be used in and around the ocean and a salty environment. S6 Flight Controller With improved responsiveness, the new S6 flight controller (or "brain") actively makes real-time adjustments to maintain the FD1S‘s altitude and balance, ensuring stable operation even with heavy baits attached. High Voltage Batteries FD1S is powered by a high-voltage LiHV 6S battery with the aim to increase the drone’s lifting capacity. With high power-to-weight ratio, the FD1S’s flight battery enable the drone to carry heavy baits without sacrificing flight stability, and has enough thrust to operate in challenging conditions such as strong winds. GPS 9.0 With improved satellites connectivity, the latest 9th-gen GPS provides unparalleled precision and stability when anglers are navigating FD1S to the specific fishing spot. The drone will maintain its position and course even in windy condition. Calibration-free Thanks to the S6 flight controller, anglers can deploy the FD1S for fishing swiftly, bypassing the complicated calibration process. FD1S can automatically calibrate its sensors to maintain stability and control during flight. Cruise Mode The cruise mode controls the FD1S to automatically fly at a constant speed and direction, making long-distance drone-casting effortless. Without constantly adjusting the drone’s flight, anglers can focus more on the fishing aspects. Auto-Return When FD1S has dropped your bait, a press of a button can automatically bring the drone back to the take-off point. The auto-return feature can also be triggered in emergencies such as low battery or signal loss. Slide-in Battery Replacing the FD1S battery is a breeze. Simply pop open the hatch, slide the battery into its slot, press the power button, and you're all set! Rest assured, the hatch is completely watertight, thanks to its rubber seal, ensuring everything stays dry when sealed. Screw-on Propellers The propeller's threaded design of FD1S ensures a straightforward setup, securely fastening the propellers to prevent them from detaching during high-thrust situations when the motors are working at high speeds. IP65Saltwater-resistant The FD1S Drone is air pressure tested and dunk tested to ensure IPx5 water resistance. The fuselage is made from marine-grade ABS to increase strength and prevent distortion. Corrosion-resistant The water resistant motors, bait release and internal electronics of FD1S are treated with a corrosion-resistant coating - adding an extra layer of protection against the salty environment. Self-Floating Design We designed the FD1S with buoyancy to enable it to float when landing and taking off from the water. 40 MPH Wind Resistance With its robust propulsion system and the precision of GPS 9.0 technology, FD1S is capable of holding its position and stability even in wind speeds reaching 40 mph / 35 knots. Automatic Flip Should the fishing drone inadvertently flip over in the calm water, the joysticks can be used to right the drone to its upright orientation, allowing you to lift-off and fly it safely back to shore. Specifications Aircraft Water Resistance Rating: IP65Weight: 1578g (Without battery); 2291g (With Battery)Max Take-Off Weight: 4491gSize (W/O Propeller): 628*628*218mm (With propellers); 372*372*202mm (Without propellers)Max Ascent Speed: 3m/sMax Descent Speed: 2m/sMax Flight Speed: GPS:10m/s; ATTI:18m/s (Without payload), 14m/s (With max payload)Max Tilt Angle: 30°Max Altitude From Takeoff Point: 120m defaultMax Flight Distance: 1300mMax Image Transmission Distance: 1300mMax Payload Capacity: 2200g(4.8lb)Max Wind Speed Resistance: 18m/sMax Flight Time(Hovering): 27 mins (no wind & no load)Hovering Precision: ±0.5mWorking Temperature: -10°C~40°CSatellite Positioning Systems: GPS + Galileo + BeiDou Remote Controller Size: 174*89*190mmWeight: 378g(Without battery)Operating Frequency: 2.402-2.478GHMBandwidth: 500KHzModulation Type: GFSKSensitivity: -92dBTransmitter Power: < 20dBBattery: 6V (1.5V AA*4)Channel: 6 Flight Battery Nominal Capacity: 4200mAhNominal Voltage: 23.1VMax Charging Voltage: 26.4VType: 6S LIHVSize: 153.6*82.4*48.3mmWeight: 716gWorking Temperature: 0°C – 40°CCharging Time: 120 minsMax Charging Current: 5A Charger Input: 100~240VOutput: 22.2V-6AMax Charging Power: 150WSupported Battery Types and Cells: 6S LIHVSize: 143*100*60mmWeight: 454.6gWorking Temperature: 0°C ~60°CStorage Temperature: 0°C ~60°C Bait Release SwellPro Fisherman FD1S Drone is equipped with a DUAL bait release.Waterproof Rating: IP65Max Payload Capacity: 2200g(4.8lb)Size: 75*50*37.5 mmWeight: 100g What's in the Box? 1x Aircraft1x Remote Controller1x Dual Payload Release2x Propellers(Pair)1x Flight Battery1x Battery Charger & Cable1x Power Adapter1x Carry Case

Read more less

ALL THRILLS, NO FRILLS     FULLY EXPERIENCE FLIGHT The adrenaline-pumping DJI Avata 2 delivers an immersive FPV drone experience with improved imaging, safety, and battery life. Amp up the fun when you pair Avata 2 with the DJI Goggles N3 and DJI RC Motion 3.   FEEL EVERY FLIGHT  Effortlessly perform difficult aerial acrobatics with DJI RC Motion 3. New pilots can now perform spectacular flips, drifts, and other captivating manoeuvres.     FLIPPING AWESOMECREATIVE EDGE EASY ACRO Soar, dive, and roll for stunning aerial footage with a single push. Capturing epic FPV footage with DJI RC Motion 3 and Avata 2 is easier than ever. One-Push Flip - 360° front/back flip, adding fresh twists to your footage.One-Push Roll - Roll 360° left/right, turning any shot from meh to magic.One-Push 180° Drift - High-speed lateral drifts to yaw spin 180° past objects and swiftly pull away, achieving dramatic visuals.   ADVANCED MANOEUVRES Fly nimbly through tight spaces with the new DJI FPV Remote Controller 3 in Manual mode to showcase flying prowess [3] and gutsy creativity.   TIGHT SHOTS IN SUPER-WIDE 4K Create breathtaking visuals with the 155° FOV of Avata 2 and its ability to swiftly approach and pull away from subjects. New pilots can quickly master aerobatic shots and capture fast-moving dynamic low-altitude shots that other drones can't.   1/1.3-INCH IMAGE SENSOR The upgraded 1/1.3-inch image sensor expands the captured dynamic range, handling low-light conditions more effectively to capture outstanding footage on every flight. [4]   IMMERSION REIMAGINED 4K/60FPS HDR VIDEOS [7] Unleash your true aerial potential. The 4K/60fps HDR on Avata 2 captures all the awesomeness of high-speed flight. In the goggles, you can adjust the sharpness and noise reduction levels for more finely tuned videos.   ROCKSTEADY Equipped with DJI's latest stabilisation algorithm, Avata 2 captures smooth, steady footage even when flying at high speeds or in windy conditions.   HORIZONSTEADY HorizonSteady handles horizontal rotations up to 360°, ensuring the captured footage remains locked on the horizon even if the drone turns sharply or sways dramatically.   155° ULTRA-WIDE-ANGLE FOV Amplify your vision and increase the immersion of low-altitude, high-speed flights. Avata 2 offers ultra-wide-angle, wide-angle, and normal-angle FOV options giving you the ability to adjust to the scenario.   10-BIT D-LOG M Capture rich detail in highlights and shadows and enhance content post-production opportunities while further streamlining colour-grading.     GOT YOU COVERED COMPREHENSIVE SAFETY The updated integrated propeller guard design of Avata 2 makes it lighter and more agile, enabling it to navigate freely in tight spaces. [4] Releasing the accelerator on RC Motion 3 or pressing the lock button brings the drone to a halt, allowing you to handle unexpected situations calmly. In addition, the automatic Return to Home (RTH) function is initiated when the drone's battery is low or in case of signal loss, adding an extra layer of security. [8]   ADVANCED POSITIONING WITH NEW SENSORS New binocular fisheye sensors enable downward and backward visual positioning during low-altitude and indoor flights, enhancing flight stability and safety.   TURTLE MODE Avata 2 can automatically flip itself back into takeoff position when upside down with Turtle mode enabled, so you can quickly get airborne again.   EXCELLENCE IN EVERYTHING THE SKY'S THE LIMIT WITH LONGER FLIGHT Avata 2 boasts a maximum flight time of 23 minutes [9] and supports PD fast charging, so you can quickly recharge it and take to the skies again. The new DJI Avata 2 Two-Way Charging Hub [3] features a power accumulation function, allowing the transfer of remaining power from multiple batteries to the one with the highest charge level, [10] giving you an "extra battery" in critical moments.   O4 VIDEO TRANSMISSION, ENHANCED PERCEPTION DJI O4 video transmission's enhanced stability lets you fully immerse yourself in each flight and provides greater safety. Its two-transmitter, four-receiver, four-antenna design ensures strong anti-interference performance, and it boasts up to 13 km of maximum video transmission distance, [11] a transmission latency as low as 24 ms, [12]1080p/100fps high-definition image quality, and a maximum transmission bitrate of 60Mbps. [13]   BOUNDLESS PASSION, WIRELESS SHARING Watch the DJI Goggles N3 live feed from Avata 2 on your smart device's DJI Fly App. [14] Connect up to 5 m away. [15]Sharing the excitement of FPV just got easier, and learning how to fly is more accessible than ever.     SAVE MORE, SHARE MORECAPTURE AND EDIT SEAMLESSLY Avata 2 comes equipped with 46GB internal storage, capable of storing approximately 90 minutes of 1080p/60fps video, ensuring you capture the best parts of each flight. With Wi-Fi connectivity for fast file transfer to your phone, post-editing and sharing of your finished work is highly efficient.  ONE-TAP VFX WITH LIGHTCUT The LightCut app, connecting directly to DJI Avata 2 via Wi-Fi, allows you to intelligently add Sky VFX during post based on the flight trajectory captured in your videos, helping you easily create engaging aerial footage. Without the need to download the footage, the app offers editing and, combined with One-Tap Edit, allows you to produce polished content in a snap effortlessly. Sky VFX - After connecting the device and importing the footage, tap Sky VFX to add unique overlays, through-the-air text animations, virtual cockpits, and dashboard effects, enhancing the interactive fun and engagement of your immersive flight footage.One-Tap Edit - With AI's intelligent recognition of video types and themes, you can effortlessly filter through and select highlights with smooth camera work and exquisite composition. Coupled with a vast array of thematic templates, enabling you to produce polished content. The app also boasts intelligent sound effects, colour recovery, one-click addition of device watermarks, and end credits, among other features.Wireless Connection - When Avata 2 is connected wirelessly to LightCut, you can preview the captured footage within the app and edit it without the need to download the footage, saving valuable space on your smartphone. PRODUCT SPECIFICATIONS AIRCRAFT Takeoff Weight: Approx. 377 gDimensions: 185×212×64 mm (L×W×H)Max Ascent Speed: 6 m/s (Normal mode)9 m/s (Sport mode)Max Descent Speed: 6 m/s (Normal mode)9 m/s (Sport mode)Max Horizontal Speed (near sea level, no wind): 8 m/s (Normal mode)16 m/s (Sport mode)27 m/s (Manual mode)** No faster than 19 m/s with the Manual mode in the EU regions. Max Takeoff Altitude: 5000 mMeasured in a windless environment when taking off from an altitude of 5000 m and ascending vertically by 500 m, using Sport mode, and from 100% battery level until 20%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.Max Flight Time: Approx. 23 minsMeasured when flying forward at a speed of 21.6 kph in a windless environment at sea level, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.Max Hovering Time: Approx. 21 minsMeasured when hovering in a windless environment at sea level, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.Max Flight Distance: 13.0 kmMeasured when flying forward at a speed of 43.2 kph in a windless environment at sea level, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.Max Wind Speed Resistance: 10.7 m/s (Level 5)Operating Temperature: -10° to 40° C (14° to 104° F)Global Navigation Satellite System: GPS + Galileo + BeiDouHovering accuracy range: Vertical:±0.1 m (with vision positioning)±0.5 m (with GNSS positioning)Horizontal:±0.3 m (with vision positioning)±1.5 m (with GNSS positioning)Internal Storage: 46 GB   CAMERA Image Sensor: 1/1.3-inch image sensorEffective Pixels: 12 MPLens: FOV: 155°Format Equivalent: 12 mmAperture: f/2.8Focus: 0.6 m to ∞ISO Range: 100-25600 (Auto)100-25600 (Manual)Shutter Speed: Video: 1/8000-1/30 sPhoto: 1/8000-1/50 sMax Image Size: 4000×2256 (16∶9)4000×3000 (4∶3)Still Photography Mode: Single shotPhoto Format: JPEGVideo Resolution: 4K (4∶3): 3840×2880@30/50/60fps4K (16∶9): 3840×2160@30/50/60fps2.7K (4∶3): 2688×2016@30/50/60fps2.7K (16∶9): 2688×1512@30/50/120fps1080p (4∶3): 1440×1080@30/50/120fps1080p (16∶9): 1920×1080@30/50/120fpsVideo Format: MP4 (H.264/H.265)Max Video Bitrate: 130 MbpsSupported File System: exFATColor Mode: StandardD-Log MCamera FOV: Supports normal mode, wide-angle mode, and ultra-wide-angle mode.EIS: Supports RockSteady 3.0+ and HorizonSteadyCan be disabled** When stabilization is turned off, footage captured with the wide-angle view supports offline stabilization Gyroflow.   GIMBAL Stabilization: Single-axis mechanical gimbal (tilt)Mechanical Range: Tilt: -95° to 90°Controllable Range: Tilt: -85° to 80°Max Control Speed (tilt): 100°/sAngular Vibration Range: ±0.01°Electronic Roll Axis: Real-time screen correction is unavailable during recording, but can be applied to the footage recorded on the drone.     SENSING Sensing Type: Downward and backward visual positioningDownward: ToF Effective Measurement Height: 10 mPrecise Hovering Range: 0.3-10 mMeasurement Range: 0.3-20 mFOV: Horizontal 78°, Vertical 78°Backward: Measurement Range: 0.5-20 mFOV: Horizontal 78°, Vertical 78°Operating Environment: Diffuse reflective surfaces with discernible patterns, diffuse reflectivity > 20% (such as concrete pavement)Adequate lighting (lux > 15, normal indoor lighting conditions)     VIDEO TRANSMISSION Video Transmission System: O4Live View Quality: 1080p@30/50/60/100fpsOperating Frequency: 2.400-2.4835 GHz5.170-5.250 GHz*5.725-5.850 GHz** 5.170-5.250 GHz and 5.725-5.850 GHz can be used only in countries and regions where permitted by local laws and regulations.Transmitter Power (EIRP): 2.4 GHz:＜33 dBm (FCC)＜20 dBm (CE/SRRC/MIC)5.1 GHz:< 23 dBm (CE)5.8 GHz:＜33 dBm (FCC)＜30 dBm (SRRC)< 14 dBm (CE)Communication Bandwidth: Max 60 MHzMax Transmission Distance (unobstructed, free of interference): FCC: 13 km (subject to the aircraft's max flight distance)CE: 10 kmSRRC: 10 kmMIC: 10 kmMeasured in an unobstructed outdoor environment free of interference. The above data shows the farthest communication range for one-way, non-return flights under each standard. Always pay attention to RTH reminders on the goggles screen during your flight.Max Transmission Distance (unobstructed, with interference): Strong Interference: Urban landscape, approx. 1.5-4 kmMedium Interference: Suburban landscape, approx. 4-10 kmLow Interference: Suburb/seaside, approx. 10-13 kmData tested under FCC standard in unobstructed environments with typical interference. Used for reference purposes only and provides no guarantee for actual transmission distance.Max Transmission Distance (obstructed, with interference): Low Interference and Obstructed by Buildings: approx. 0-0.5 kmLow Interference and Obstructed by Trees: approx. 0.5-3 kmData tested under FCC standard in environments with typical low interference. Used for reference purposes only and provides no guarantee for actual transmission distance.Max Download Speed: Wi-Fi: 30 MB/s** Measured in a laboratory environment with little interference in countries/regions that support both 2.4 GHz and 5.8 GHz. Download speeds may vary depending on the actual conditions.Max Video Bitrate: 60MbpsAntennas: 4 antennas, 2T4R     WI-FI Protocol: 802.11a/b/g/n/acOperating Frequency: 2.400-2.4835 GHz5.725-5.850 GHzTransmitter Power (EIRP): 2.4 GHz:<20 dBm (FCC／CE／SRRC／MIC)5.8 GHz:<20 dBm (FCC／SRRC)< 14 dBm (CE)     BLUETOOTH Protocol: Bluetooth 5.0Operating Frequency: 2.400-2.4835 GHzTransmitter Power (EIRP): <10 dBm     INTELLIGENT FLIGHT BATTERY Capacity: 2150 mAhWeight: Approx. 145 gStandard Voltage: 14.76 VMax Charging Voltage: 17 VBattery Type: Li-ionEnergy: 31.7 Wh@0.5CCharging Temperature: 5° to 40° C (41° to 104° F)Charging Time: With Charging Hub (60W max charging power):From 0 to 100%: approx. 45 minFrom 10 to 90%: approx. 30 minDirectly Charging the Drone (30 W max charging power):From 0 to 100%: approx. 88 minFrom 10 to 90%: approx. 60 min     CHARGER Recommended Charger: DJI 65W Portable ChargerDJI 65W Car ChargerUSB Power Delivery charger     BATTERY CHARGING HUB Input: 5-20 V, max 3 AOutput (power accumulation): Max 65 WOutput (charging): Max 17 VOutput (USB): 5 V, 2 ACharging Type: Three batteries charged in sequence.Compatibility: DJI Avata 2 Intelligent Flight Battery     STORAGE Recommended microSD Cards: SanDisk Extreme PRO 32GB U3 A1 V30 microSDHCLexar Professional 1066x 64GB U3 A2 V30 microSDXCLexar Professional 1066x 128GB U3 A2 V30 microSDXCLexar Professional 1066x 256GB U3 A2 V30 microSDXCLexar Professional 1066x 512GB U3 A2 V30 microSDXCKingston CANVAS Go! Plus 64GB U3 A2 V30 microSDXCKingston CANVAS Go! Plus 128GB U3 A2 V30 microSDXCKingston CANVAS React Plus 64GB U3 A1 V90 microSDXCKingston CANVAS React Plus 128GB U3 A1 V90 microSDXCKingston CANVAS React Plus 256GB U3 A1 V90 microSDXCSamsung EVO Plus 512GB U3 A2 V30 microSDXC     DJI FPV REMOTE CONTROLLER 3 Max Operating Time: Approx. 10 hoursOperating Temperature: -10° to 40° C (14° to 104° F)Charging Temperature: 0° to 50° C (32° to 122° F)Charging Time: 2 hoursCharging Type: 5 V, 2 ABattery Capacity: 2600 mAhWeight: Approx. 240 gDimensions: 165×119×62 mm (L×W×H)Operating Frequency: 2.400-2.4835 GHzTransmitter Power (EIRP): 2.400 GHz:＜26 dBm (FCC)＜20 dBm (CE/SRRC/MIC) IN THE BOX DJI Avata 2 × 1DJI Avata 2 Intelligent Flight Battery × 3DJI Avata 2 Propellers (Pair) × 2DJI Avata 2 Propeller Screw × 8Screwdriver × 1Lanyard × 1DJI Avata 2 Gimbal Protector × 1Type-C to Type-C PD Cable × 1DJI Goggles N3 × 1DJI RC Motion 3 × 1

Read more less

ALL THRILLS, NO FRILLS     FULLY EXPERIENCE FLIGHT The adrenaline-pumping DJI Avata 2 delivers an immersive FPV drone experience with improved imaging, safety, and battery life. Amp up the fun when you pair Avata 2 with the DJI Goggles N3 and DJI RC Motion 3.   FEEL EVERY FLIGHT  Effortlessly perform difficult aerial acrobatics with DJI RC Motion 3. New pilots can now perform spectacular flips, drifts, and other captivating manoeuvres.     FLIPPING AWESOMECREATIVE EDGE EASY ACRO Soar, dive, and roll for stunning aerial footage with a single push. Capturing epic FPV footage with DJI RC Motion 3 and Avata 2 is easier than ever. One-Push Flip - 360° front/back flip, adding fresh twists to your footage.One-Push Roll - Roll 360° left/right, turning any shot from meh to magic.One-Push 180° Drift - High-speed lateral drifts to yaw spin 180° past objects and swiftly pull away, achieving dramatic visuals.   ADVANCED MANOEUVRES Fly nimbly through tight spaces with the new DJI FPV Remote Controller 3 in Manual mode to showcase flying prowess [3] and gutsy creativity.   TIGHT SHOTS IN SUPER-WIDE 4K Create breathtaking visuals with the 155° FOV of Avata 2 and its ability to swiftly approach and pull away from subjects. New pilots can quickly master aerobatic shots and capture fast-moving dynamic low-altitude shots that other drones can't.   1/1.3-INCH IMAGE SENSOR The upgraded 1/1.3-inch image sensor expands the captured dynamic range, handling low-light conditions more effectively to capture outstanding footage on every flight. [4]   IMMERSION REIMAGINED 4K/60FPS HDR VIDEOS [7] Unleash your true aerial potential. The 4K/60fps HDR on Avata 2 captures all the awesomeness of high-speed flight. In the goggles, you can adjust the sharpness and noise reduction levels for more finely tuned videos.   ROCKSTEADY Equipped with DJI's latest stabilisation algorithm, Avata 2 captures smooth, steady footage even when flying at high speeds or in windy conditions.   HORIZONSTEADY HorizonSteady handles horizontal rotations up to 360°, ensuring the captured footage remains locked on the horizon even if the drone turns sharply or sways dramatically.   155° ULTRA-WIDE-ANGLE FOV Amplify your vision and increase the immersion of low-altitude, high-speed flights. Avata 2 offers ultra-wide-angle, wide-angle, and normal-angle FOV options giving you the ability to adjust to the scenario.   10-BIT D-LOG M Capture rich detail in highlights and shadows and enhance content post-production opportunities while further streamlining colour-grading.     GOT YOU COVERED COMPREHENSIVE SAFETY The updated integrated propeller guard design of Avata 2 makes it lighter and more agile, enabling it to navigate freely in tight spaces. [4] Releasing the accelerator on RC Motion 3 or pressing the lock button brings the drone to a halt, allowing you to handle unexpected situations calmly. In addition, the automatic Return to Home (RTH) function is initiated when the drone's battery is low or in case of signal loss, adding an extra layer of security. [8]   ADVANCED POSITIONING WITH NEW SENSORS New binocular fisheye sensors enable downward and backward visual positioning during low-altitude and indoor flights, enhancing flight stability and safety.   TURTLE MODE Avata 2 can automatically flip itself back into takeoff position when upside down with Turtle mode enabled, so you can quickly get airborne again.   EXCELLENCE IN EVERYTHING THE SKY'S THE LIMIT WITH LONGER FLIGHT Avata 2 boasts a maximum flight time of 23 minutes [9] and supports PD fast charging, so you can quickly recharge it and take to the skies again. The new DJI Avata 2 Two-Way Charging Hub [3] features a power accumulation function, allowing the transfer of remaining power from multiple batteries to the one with the highest charge level, [10] giving you an "extra battery" in critical moments.   O4 VIDEO TRANSMISSION, ENHANCED PERCEPTION DJI O4 video transmission's enhanced stability lets you fully immerse yourself in each flight and provides greater safety. Its two-transmitter, four-receiver, four-antenna design ensures strong anti-interference performance, and it boasts up to 13 km of maximum video transmission distance, [11] a transmission latency as low as 24 ms, [12]1080p/100fps high-definition image quality, and a maximum transmission bitrate of 60Mbps. [13]   BOUNDLESS PASSION, WIRELESS SHARING Watch the DJI Goggles N3 live feed from Avata 2 on your smart device's DJI Fly App. [14] Connect up to 5 m away. [15]Sharing the excitement of FPV just got easier, and learning how to fly is more accessible than ever.     SAVE MORE, SHARE MORECAPTURE AND EDIT SEAMLESSLY Avata 2 comes equipped with 46GB internal storage, capable of storing approximately 90 minutes of 1080p/60fps video, ensuring you capture the best parts of each flight. With Wi-Fi connectivity for fast file transfer to your phone, post-editing and sharing of your finished work is highly efficient.  ONE-TAP VFX WITH LIGHTCUT The LightCut app, connecting directly to DJI Avata 2 via Wi-Fi, allows you to intelligently add Sky VFX during post based on the flight trajectory captured in your videos, helping you easily create engaging aerial footage. Without the need to download the footage, the app offers editing and, combined with One-Tap Edit, allows you to produce polished content in a snap effortlessly. Sky VFX - After connecting the device and importing the footage, tap Sky VFX to add unique overlays, through-the-air text animations, virtual cockpits, and dashboard effects, enhancing the interactive fun and engagement of your immersive flight footage.One-Tap Edit - With AI's intelligent recognition of video types and themes, you can effortlessly filter through and select highlights with smooth camera work and exquisite composition. Coupled with a vast array of thematic templates, enabling you to produce polished content. The app also boasts intelligent sound effects, colour recovery, one-click addition of device watermarks, and end credits, among other features.Wireless Connection - When Avata 2 is connected wirelessly to LightCut, you can preview the captured footage within the app and edit it without the need to download the footage, saving valuable space on your smartphone. PRODUCT SPECIFICATIONS AIRCRAFT Takeoff Weight: Approx. 377 gDimensions: 185×212×64 mm (L×W×H)Max Ascent Speed: 6 m/s (Normal mode)9 m/s (Sport mode)Max Descent Speed: 6 m/s (Normal mode)9 m/s (Sport mode)Max Horizontal Speed (near sea level, no wind): 8 m/s (Normal mode)16 m/s (Sport mode)27 m/s (Manual mode)** No faster than 19 m/s with the Manual mode in the EU regions. Max Takeoff Altitude: 5000 mMeasured in a windless environment when taking off from an altitude of 5000 m and ascending vertically by 500 m, using Sport mode, and from 100% battery level until 20%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.Max Flight Time: Approx. 23 minsMeasured when flying forward at a speed of 21.6 kph in a windless environment at sea level, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.Max Hovering Time: Approx. 21 minsMeasured when hovering in a windless environment at sea level, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.Max Flight Distance: 13.0 kmMeasured when flying forward at a speed of 43.2 kph in a windless environment at sea level, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.Max Wind Speed Resistance: 10.7 m/s (Level 5)Operating Temperature: -10° to 40° C (14° to 104° F)Global Navigation Satellite System: GPS + Galileo + BeiDouHovering accuracy range: Vertical:±0.1 m (with vision positioning)±0.5 m (with GNSS positioning)Horizontal:±0.3 m (with vision positioning)±1.5 m (with GNSS positioning)Internal Storage: 46 GB   CAMERA Image Sensor: 1/1.3-inch image sensorEffective Pixels: 12 MPLens: FOV: 155°Format Equivalent: 12 mmAperture: f/2.8Focus: 0.6 m to ∞ISO Range: 100-25600 (Auto)100-25600 (Manual)Shutter Speed: Video: 1/8000-1/30 sPhoto: 1/8000-1/50 sMax Image Size: 4000×2256 (16∶9)4000×3000 (4∶3)Still Photography Mode: Single shotPhoto Format: JPEGVideo Resolution: 4K (4∶3): 3840×2880@30/50/60fps4K (16∶9): 3840×2160@30/50/60fps2.7K (4∶3): 2688×2016@30/50/60fps2.7K (16∶9): 2688×1512@30/50/120fps1080p (4∶3): 1440×1080@30/50/120fps1080p (16∶9): 1920×1080@30/50/120fpsVideo Format: MP4 (H.264/H.265)Max Video Bitrate: 130 MbpsSupported File System: exFATColor Mode: StandardD-Log MCamera FOV: Supports normal mode, wide-angle mode, and ultra-wide-angle mode.EIS: Supports RockSteady 3.0+ and HorizonSteadyCan be disabled** When stabilization is turned off, footage captured with the wide-angle view supports offline stabilization Gyroflow.   GIMBAL Stabilization: Single-axis mechanical gimbal (tilt)Mechanical Range: Tilt: -95° to 90°Controllable Range: Tilt: -85° to 80°Max Control Speed (tilt): 100°/sAngular Vibration Range: ±0.01°Electronic Roll Axis: Real-time screen correction is unavailable during recording, but can be applied to the footage recorded on the drone.     SENSING Sensing Type: Downward and backward visual positioningDownward: ToF Effective Measurement Height: 10 mPrecise Hovering Range: 0.3-10 mMeasurement Range: 0.3-20 mFOV: Horizontal 78°, Vertical 78°Backward: Measurement Range: 0.5-20 mFOV: Horizontal 78°, Vertical 78°Operating Environment: Diffuse reflective surfaces with discernible patterns, diffuse reflectivity > 20% (such as concrete pavement)Adequate lighting (lux > 15, normal indoor lighting conditions)     VIDEO TRANSMISSION Video Transmission System: O4Live View Quality: 1080p@30/50/60/100fpsOperating Frequency: 2.400-2.4835 GHz5.170-5.250 GHz*5.725-5.850 GHz** 5.170-5.250 GHz and 5.725-5.850 GHz can be used only in countries and regions where permitted by local laws and regulations.Transmitter Power (EIRP): 2.4 GHz:＜33 dBm (FCC)＜20 dBm (CE/SRRC/MIC)5.1 GHz:< 23 dBm (CE)5.8 GHz:＜33 dBm (FCC)＜30 dBm (SRRC)< 14 dBm (CE)Communication Bandwidth: Max 60 MHzMax Transmission Distance (unobstructed, free of interference): FCC: 13 km (subject to the aircraft's max flight distance)CE: 10 kmSRRC: 10 kmMIC: 10 kmMeasured in an unobstructed outdoor environment free of interference. The above data shows the farthest communication range for one-way, non-return flights under each standard. Always pay attention to RTH reminders on the goggles screen during your flight.Max Transmission Distance (unobstructed, with interference): Strong Interference: Urban landscape, approx. 1.5-4 kmMedium Interference: Suburban landscape, approx. 4-10 kmLow Interference: Suburb/seaside, approx. 10-13 kmData tested under FCC standard in unobstructed environments with typical interference. Used for reference purposes only and provides no guarantee for actual transmission distance.Max Transmission Distance (obstructed, with interference): Low Interference and Obstructed by Buildings: approx. 0-0.5 kmLow Interference and Obstructed by Trees: approx. 0.5-3 kmData tested under FCC standard in environments with typical low interference. Used for reference purposes only and provides no guarantee for actual transmission distance.Max Download Speed: Wi-Fi: 30 MB/s** Measured in a laboratory environment with little interference in countries/regions that support both 2.4 GHz and 5.8 GHz. Download speeds may vary depending on the actual conditions.Max Video Bitrate: 60MbpsAntennas: 4 antennas, 2T4R     WI-FI Protocol: 802.11a/b/g/n/acOperating Frequency: 2.400-2.4835 GHz5.725-5.850 GHzTransmitter Power (EIRP): 2.4 GHz:<20 dBm (FCC／CE／SRRC／MIC)5.8 GHz:<20 dBm (FCC／SRRC)< 14 dBm (CE)     BLUETOOTH Protocol: Bluetooth 5.0Operating Frequency: 2.400-2.4835 GHzTransmitter Power (EIRP): <10 dBm     INTELLIGENT FLIGHT BATTERY Capacity: 2150 mAhWeight: Approx. 145 gStandard Voltage: 14.76 VMax Charging Voltage: 17 VBattery Type: Li-ionEnergy: 31.7 Wh@0.5CCharging Temperature: 5° to 40° C (41° to 104° F)Charging Time: With Charging Hub (60W max charging power):From 0 to 100%: approx. 45 minFrom 10 to 90%: approx. 30 minDirectly Charging the Drone (30 W max charging power):From 0 to 100%: approx. 88 minFrom 10 to 90%: approx. 60 min     CHARGER Recommended Charger: DJI 65W Portable ChargerDJI 65W Car ChargerUSB Power Delivery charger     BATTERY CHARGING HUB Input: 5-20 V, max 3 AOutput (power accumulation): Max 65 WOutput (charging): Max 17 VOutput (USB): 5 V, 2 ACharging Type: Three batteries charged in sequence.Compatibility: DJI Avata 2 Intelligent Flight Battery     STORAGE Recommended microSD Cards: SanDisk Extreme PRO 32GB U3 A1 V30 microSDHCLexar Professional 1066x 64GB U3 A2 V30 microSDXCLexar Professional 1066x 128GB U3 A2 V30 microSDXCLexar Professional 1066x 256GB U3 A2 V30 microSDXCLexar Professional 1066x 512GB U3 A2 V30 microSDXCKingston CANVAS Go! Plus 64GB U3 A2 V30 microSDXCKingston CANVAS Go! Plus 128GB U3 A2 V30 microSDXCKingston CANVAS React Plus 64GB U3 A1 V90 microSDXCKingston CANVAS React Plus 128GB U3 A1 V90 microSDXCKingston CANVAS React Plus 256GB U3 A1 V90 microSDXCSamsung EVO Plus 512GB U3 A2 V30 microSDXC     DJI FPV REMOTE CONTROLLER 3 Max Operating Time: Approx. 10 hoursOperating Temperature: -10° to 40° C (14° to 104° F)Charging Temperature: 0° to 50° C (32° to 122° F)Charging Time: 2 hoursCharging Type: 5 V, 2 ABattery Capacity: 2600 mAhWeight: Approx. 240 gDimensions: 165×119×62 mm (L×W×H)Operating Frequency: 2.400-2.4835 GHzTransmitter Power (EIRP): 2.400 GHz:＜26 dBm (FCC)＜20 dBm (CE/SRRC/MIC) IN THE BOX DJI Avata 2 × 1DJI Avata 2 Intelligent Flight Battery × 1DJI Avata 2 Propellers (Pair) × 2DJI Avata 2 Propeller Screw × 8Screwdriver × 1Lanyard × 1DJI Avata 2 Gimbal Protector × 1Type-C to Type-C PD Cable × 1DJI Goggles N3 × 1DJI RC Motion 3 × 1

Read more less

The quick-release locking clip lets you wear the Osmo Action camera on your hand or wrist to take immersive POV shots or swiftly store the camera. The ball joint at the bottom of the locking clip can rotate 360° and tilt, allowing you to adjust the shooting angle and even get selfies during cycling. The hook-and-loop design allows you to adjust the size to fit your palm or wrist at any time for comfortable wearing. Use scenarios: Activities when your hands are occupied, such as swimming, surfing, water activities, rock climbing, skydiving etc.   CompatibilityOsmo 360Osmo NanoOsmo Action 6Osmo Action 5 ProOsmo Action 4Osmo Action 3 IN THE BOX Osmo Action 360° Wrist Strap × 1

Read more less

These stylus tips work with BOOX InkSpire stylus. The tips are 1mm thick and have 4096 pressure levels & tilt sensitivity for smooth handwriting. When you write with it on BOOX Tab X C, it provides you with tactile feedback during use. Compatibility Tab X C

Read more less

The first and greatest of the Daemon Princes A powerful fighter who can unleash arcane powers Can be used in either Warhammer Age of Sigmar or Warhammer 40,00 Be'lakor, the Dark Master, is the first of the Daemon Princes and a consummate champion of Chaos. Wreathed in ethereal shadows and lifted high above the battlefield on monstrous wings, Be'lakor regards the efforts of his foes with a bitter scorn as they struggle in vain against his diabolical plans. As the Mortal Realms descend into chaos following the cataclysmic Soul Wars, the First Prince knows his time has finally arrived. Neither men nor gods can stop his grand ambition.As befits the greatest of the Daemon Princes, Be'lakor is every bit the creature of nightmare he appears to be. Supernaturally skilled in both the martial and magical arts, his imposing figure is the perfect centrepiece for an army of Chaos and a potent wrecking ball with which to cast your enemies aside. Most impressive of all, this incredible model is 170mm tall from the bottom of his base to the tip of his wings.This multipart plastic kit is comprised of 85 components, with which you can assemble one Be'lakor, the Dark Master, and is supplied with 1x Citadel 100mm Round base. This kit contains multiple options to build Be'lakor themed for either a Warhammer Age of Sigmar Slaves to Darkness army, a Warhammer 40,000 Chaos Daemons army, or a neutral theme to suit both games.

Read more less

A fast-moving airborne assault squad for your Space Marine army Builds five Jump Pack Intercessors with chainswords and heavy bolt pistols Leap over obstacles and enemies to strike where the foe is vulnerable Intercessors equipped with powerful jump packs soar over the battlefield, slamming into the foe like a hammer from the skies. They swiftly cut down all opposition with point-blank pistol fire and furious slashes from their chainswords, before launching off to engage the next target.This multipart plastic kit builds five Jump Pack Intercessors, a rapid assault force of airborne Space Marines. These warriors wear bulky but powerful jump packs, and are armed with heavy bolt pistols and roaring chainswords – one Intercessor can trade their heavy bolt pistol for a searing plasma pistol. You can also build a Sergeant with an armoury of extra weapon options – a hand flamer or plasma pistol, and a power sword or power fist.The kit includes plenty of cosmetic options, including bare or helmeted heads for every Intercessor, unique heads and tilting plates for the Sergeant, and a variety of grenades, holsters, pouches, and relics to accessorise each squad.This kit contains 108 plastic components, 5x Citadel 32mm Round Bases, and a Space Marines Infantry Transfer Sheet. These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints

Read more less

5 plastic miniatures for Warhammer 40,000 Add a force of unstoppable destruction to your Death Guard army March across the battlefield, shrugging off hits from enemy heavy weapons and artillery Customise your unit with multiple weapon and cosmetic options Blightlord Terminators are incredibly tough. Thanks to their cursed Cataphractii armour and Nurgle’s gifts, they are experts in breach assaults, boarding actions, and sudden teleport strikes. Due to long periods spent aboard pox-ridden warships, they are saturated with foulness, which pours off them to rot flesh and corrode metal.This multipart plastic kit builds five Blightlord Terminators, disease-spreading veterans for your Death Guard armies in games of Warhammer 40,000. These shock troops are forever fused to their filth-smeared Cataphractii armour, making them incredibly resilient. They also have the pick of tainted armouries, meaning they have the best weapons to deal with any foolish enough to stand before the chosen of Nurgle.They can be assembled with a fearsome array of wargear, and the kit includes the following weapon options, giving you massive tactical flexibility:– 4 Combi-bolters– 6 Bubotic blades– 1 Reaper autocannon– 1 Plague spewer– 1 Blight launcher– 1 Flail of corruption– 1 Combi-weaponThe kit also includes cosmetic options, including different heads and shoulder pads, making it easy to customise your unit.This kit comprises 64 plastic components, and 5x Citadel 40mm Round Bases. These miniatures require assembly and are supplied unpainted – we recommend using Citadel Plastic Glue and Citadel Colour paints.

Read more less

NOTE: FERNTECH AIM FOR AN AVERAGE TURNAROUND TIME ON CARE REFRESH CLAIMS OF 10 WORKING DAYS PLUS SHIPPING TIME, ONCE YOUR CLAIM HAS BEEN RECEIVED.CARE REFRESH IS A NON-REFUNDABLE AND NON-RETURNABLE ITEM, ONCE CODES HAVE BEEN SUPPLIED THEY CAN NOT BE RETURNED.   FEATURES Provides two replacement units for an additional charge as per the table below. The Care Refresh 1-year Plan lasts for one year from the date it is bound to your product, and covers for accidents such as water damage, natural wear, or cracking and deformation, letting you fly with peace of mind.   DJI Care Refresh 1-Year Plan ReplacementService Number of Replacements 2 Replacement Fee $120.00 Extended Warranty Period Official warranty is provided during the validity period Support Renewal? Renew 1-Year Plan up to twice   Please Note: DJI Care Refresh can be bound to your DJI product when it meets one of the following criteria: Brand new and un-activated product. Handheld device activated within the last 30 days. *If your device has been activated for over 30 days, follow the instructional guide linked below to verify your device is in good working order and still eligible for DJI Care Refresh. Video Verification Guide Each time you request a replacement, you’ll receive a replacement unit that is new or equivalent to new in performance and reliability. If you have a DJI Care Refresh activation code, click here to bind it to your device.     WATER DAMAGE COVERAGE We'll replace your device if an accident occurs, even if it's damaged by water.    FOUR REPLACEMENTS, TOTAL PEACE OF MIND For an additional charge, DJI Care Refresh offers up to four replacement units within two years and covers accidents such as water damage, natural wear, or cracking and deformation. These replacement units will be new or equivalent to new in performance and reliability.     DJI CARE REFRESH REPAIR PROCESS Ferntech will handle the entire DJI Care Refresh replacement process, which is as follows: Request a Care Refresh replacement via our online Service Request Form Delivery of damaged item* – please contact our helpful team at info@ferntech.co.nz and they will provide details on how to get your product to us. Product assessment by Ferntech team – upon completion, we will select the cheapest option to either have your product repaired or replaced under your DJI Care Refresh policy. Please advise if you would like to have your product replaced even if a repair is cheaper. *We require your product to complete the DJI Care Refresh process.   Please Note: DJI Care Refresh covers return shipping fees back to your address. DJI Care Refresh and the corresponding product must be purchased from New Zealand. DJI Care Refresh only supports devices purchased from official or authorised channels. If you want to purchase DJI Care Refresh for a device that has been activated for over 30 days, follow this Video Verification Guide.

Read more less

NOTE: FERNTECH AIM FOR AN AVERAGE TURNAROUND TIME ON CARE REFRESH CLAIMS OF 10 WORKING DAYS PLUS SHIPPING TIME, ONCE YOUR CLAIM HAS BEEN RECEIVED.CARE REFRESH IS A NON-REFUNDABLE AND NON-RETURNABLE ITEM, ONCE CODES HAVE BEEN SUPPLIED THEY CAN NOT BE RETURNED.   FEATURES Provides four replacement units for an additional charge as per the table below. The Care Refresh 2-year Plan lasts for two years from the date it is bound to your product, and covers for accidents such as water damage, natural wear, or cracking and deformation, letting you fly with peace of mind.   DJI Care Refresh 2-Year Plan ReplacementService Number of Replacements 4 Replacement Fee $120.00 Extended Warranty Period Official warranty is provided during the validity period Support Renewal? Renew 1-Year Plan once   Please Note: DJI Care Refresh can be bound to your DJI product when it meets one of the following criteria: Brand new and un-activated product. Handheld device activated within the last 30 days. *If your device has been activated for over 30 days, follow the instructional guide linked below to verify your device is in good working order and still eligible for DJI Care Refresh. Video Verification Guide Each time you request a replacement, you’ll receive a replacement unit that is new or equivalent to new in performance and reliability. If you have a DJI Care Refresh activation code, click here to bind it to your device.     WATER DAMAGE COVERAGE We'll replace your device if an accident occurs, even if it's damaged by water.    FOUR REPLACEMENTS, TOTAL PEACE OF MIND For an additional charge, DJI Care Refresh offers up to four replacement units within two years and covers accidents such as water damage, natural wear, or cracking and deformation. These replacement units will be new or equivalent to new in performance and reliability.     DJI CARE REFRESH REPAIR PROCESS Ferntech will handle the entire DJI Care Refresh replacement process, which is as follows: Request a Care Refresh replacement via our online Service Request Form Delivery of damaged item* – please contact our helpful team at info@ferntech.co.nz and they will provide details on how to get your product to us. Product assessment by Ferntech team – upon completion, we will select the cheapest option to either have your product repaired or replaced under your DJI Care Refresh policy. Please advise if you would like to have your product replaced even if a repair is cheaper. *We require your product to complete the DJI Care Refresh process.   Please Note: DJI Care Refresh covers return shipping fees back to your address. DJI Care Refresh and the corresponding product must be purchased from New Zealand. DJI Care Refresh only supports devices purchased from official or authorised channels. If you want to purchase DJI Care Refresh for a device that has been activated for over 30 days, follow this Video Verification Guide.

Read more less

This multi-part plastic kit contains the components necessary to assemble a set of 3 Deathshroud Bodyguard. Impressively large and dense, covered in rot, decay, tentacles and horror, these models exemplify the corrupting gift that Nurgle imparts. Each is armed with a manreaper - a large scythe, pitted and pockmarked with rust and disease, it stands even taller than the Deathshroud who brandish it - and a plaguespurter gauntlet, used to squirt unpleasant maladies at the unfortunate. Each of the three is bedecked with Nurgle symbolism, found in the rust, boils and chips in their armour, through which vile tentacled and bloated flesh poke, barely covered by ragged cloaks. there are 7 variant heads included, a mix of helmeted and bare, and an extra plaguespurter gauntlet - this is for an optional unit Champion, who has the option of wielding two of these.The Deathshroud Bodyguard come as 51 components, and are supplied with 3 Citadel 40mm Round bases. These miniatures are supplied unpainted and requires assembly - we recommend using Citadel Plastic Glue and Citadel Colour paints.

Read more less

10 plastic miniatures for Warhammer 40,000 A key selection of Space Marines units, perfect for starting a new White Scars army or expanding your existing collection Includes a brand new miniature and White Scars Transfer Sheet Save money compared to buying each kit individually The White Scars favour lightning-fast assaults, closing ranks with their enemies before they have a chance to prepare, and then rushing away to strike the next foe. They employ bikes in far larger numbers than most Chapters of Space Marines, and use rapid transports to bring in the infantry. Their reputation for speed and ferocity is well deserved.If you want to take the fight to the enemy as quickly as possible, this box is the perfect way to start a new White Scars collection – or expand an existing army – and save money compared to buying the kits individually. Led by Suboden Khan on his grav bike, Thunder, and a trio of Outrider bikers, they are an immediate threat to a slow or unprepared foe. Assault Intercessors and their Impulsor transport are ready to mop up whatever is left after the initial assault and grab key objectives while the enemy is still reeling. These 10 plastic miniatures represent a complete White Scars force for use in tight, tactical Combat Patrol games of Warhammer 40,000. The rules for this Combat Patrol are available as a free download on the Warhammer Community website.This set builds 10 multipart plastic White Scars miniatures:– 1x Suboden Khan – 1x Impulsor – 3x Outriders – 5x Assault IntercessorsThe miniatures in this kit are easy to customise. Suboden Khan can be built with or without his helmet.The Impulsor can replace its storm bolters with fragstorm grenade launchers, and can optionally take an ironhail heavy stubber. There are also options for a bellicatus missile array, ironhail skytalon array, orbital comms array, or shield dome.One Assault Intercessor can be built as an optional Sergeant, armed with a heavy bolt pistol, hand flamer, or plasma pistol, and a chainsword, power weapon, power fist, or thunder hammer. Other members of the squad have optional narrative builds, including one reloading their pistol and one with a bandolier of grenades.This kit is supplied with a brand new White Scars Transfer Sheet, containing 407 high-quality waterslide transfers. These include Chapter icons for the White Scars, battlefield role icons, and numbers. They also include iconography for the Spearpoint Brotherhood, Firefist Brotherhood, and Eagle Brotherhood companies as well as the Storm Lords successor Chapter.Suboden Khan will be available separately at a later date. The other miniatures in this set are available separately.This kit comprises 299 plastic components, 1x Citadel 100mm Round Base, 4x Citadel 90mm by 52.5mm Oval Bases, 5x Citadel 32mm Round Bases, and 1x Tank Hover Stand. These miniatures require assembly and are supplied unpainted – we recommend using Citadel Plastic Glue and Citadel Colour paints.

Read more less

Transform HERO13 Black into the ultimate cinematic camera The premium HB-Series Anamorphic Lens Mod is the easiest way for cinematographers and creators of all levels to capture cinematic, ultra wide-angle footage with reduced distortion. The camera and lens do all the work—you’ll get the anamorphic look you want without needing to know how to do it in post-production. It lets anyone tell their stories using the 21:9 aspect ratio used in feature films, and cinematic lens flares add to the pro quality of your footage. Simply attach the lens, and your camera will adjust its settings accordingly. Durable and scratch-resistant, the lens is waterproof1 when installed. Product Details Includes Anamorphic Lens Mod, front and rear protective caps and microfiber lens cloth Captures cinematic footage in an ultra wide-angle 21:9 aspect ratio—ideal for static shots and stabilized gimbal footage of low impact/vibration activities² Horizontal lens flares add the professional touch of feature films to your footage In-camera “de-squeezing” streamlines editing by eliminating the need to de-squeeze footage in post-production HERO13 Black automatically recognizes the lens when attached and switches into anamorphic mode; when removed, the camera returns to its standard settings Scratch-resistant and waterproof¹ when mounted on the camera; also has a hydrophobic lens coating that repels water Supported by HyperSmooth video stabilization; use with a gimbal for even smoother, more cinematic results Easy to attach, with no tools needed Part of the high-performance HB-Series Lens collection—exclusively for HERO13 Black Includes GoPro’s Limited Lifetime Warranty

Read more less

The EcoFlow 125W bifacial modular solar panel offers 25% efficiency, plug-and-play expansion, and reliable performance in various weather conditions, making it ideal for long-term home and outdoor use. Perfectly Tailored for Home Use Long-Lasting Solar Solution for Your Home With a 30-year lifespan, this durable, low-maintenance solar panel is ideal for home use. Home Backyard Fully charge EcoFlow DELTA Pro 3(4kWh) in as fast as 3-4 hours with 3 sets of 500W (125W × 4) panels[1]. RV Fully charge EcoFlow DELTA 3(1kWh) in as fast as 2-3 hours with 1 set of 500W (125W × 4) panels[1]. Modular Design Seamless Expansion and Broad Compatibility The EcoFlow 125W Bifacial Solar Panel features an innovative modular design, delivering 125W power, 50V, and 3A current output, designed for seamless expansion within its safe range, it offers exceptional adaptability with various EcoFlow portable power stations. Revolutionary N-Type TOPCon Solar Cells & Dual-Sided Design Maximize Energy Generation With N-Type TOPCon technology, achieve up to 25% conversion efficiency. The dual-sided design generates Max. 138W[2] bifacial output, capturing more solar energy. Coated with Protective Lamination & Tempered Glass Durable, All-Weather Design Built with robust anti-corrosive aluminum frame, TOPCon cells feature 1.1mm ultra-thin tempered glass for excellent light transmission, POE films for UV and moisture resistance, PET backsheets for durability. The panel is IP68-rated with waterproof XT60-W connector, ensuring robust, weather-resistant performance. Flexible, Lightweight Design for Adjustable Power Needs The 500W setup weighs only 37 lbs (16.8 kg) . The modular design enables flexible power configuration. For situations requiring less than 500W or a lighter setup, the system can be split into individual panels, offering both flexibility and reduced weight. Featuring 3M™ Dual Lock™ Reclosable Fasteners[3], ensures quick and steady assembly, and the protective bag makes transport and storage effortless. Universally Compatible Solar Cable Plug and Play with Your Power System Easily connect to third-party solar systems using the included photovoltaic connector (MC4 compatible）[4]. Safely charge your power systems and portable power stations with XT60 connectors, featuring waterproof, touch-safe, anti-leak technology for reliable performance. EcoFlow 125W Bifacial Modular Solar Panel Charging Times Specs Rated Power: STC 125W (±3W) BNPI 138W (±3W) Open Circuit Voltage: 50V Short Circuit Current: STC 3.2A BNPI 3.4A Optimal Operating Voltage: 43V Optimal Operating Current: STC 3ABNPI 3.2A Recommended Ambient Temperature: -40°C to 85°C Efficiency: 25% Bifaciality Coefficients: 80%±5% Weight: Approx. 4.2 kg Dimensions (L×W×H): 612×1154×22 mm Maximum System Voltage: 600V DC (IEC/UL) Cell Type: TOPCon monocrystalline silicon Connector Type: XT60 Waterproof & Dustproof Rating: Solar Panel IP68 XT-60 Connector IP68 Warranty (AU): 5 Years Lifespan: 30 years, 90% What's In The Box EcoFlow 125W Bifacial Modular Solar Panel ×2Protective Bag ×1Quick Start Guide, Safety Instructions & Warranty CardEcoFlow XT60i to XT60i Extension Charging Cable ×1 Footnotes: [1] Tested under optimal conditions.[2] The maximum combined power output of the 125W bifacial panel is 138W. Under the same lighting conditions, the bifacial panel can generate up to 10% more power on the rear side compared to a single-sided panel, calculated as (138-125)/125 * 100% = 10.4%.[3]The term "3M" and "dual lock" are both trademarks belonging to the 3M Company, also known as the Minnesota Mining and Manufacturing Company.[4] Included with the 500W (125W × 4) bifacial modular solar panel set.  

Read more less

The EcoFlow 125W bifacial modular solar panel offers 25% efficiency, plug-and-play expansion, and reliable performance in various weather conditions, making it ideal for long-term home and outdoor use. Perfectly Tailored for Home Use Long-Lasting Solar Solution for Your Home With a 30-year lifespan, this durable, low-maintenance solar panel is ideal for home use. Home Backyard Fully charge EcoFlow DELTA Pro 3(4kWh) in as fast as 3-4 hours with 3 sets of 500W (125W × 4) panels[1]. RV Fully charge EcoFlow DELTA 3(1kWh) in as fast as 2-3 hours with 1 set of 500W (125W × 4) panels[1]. Modular Design Seamless Expansion and Broad Compatibility The EcoFlow 125W Bifacial Solar Panel features an innovative modular design, delivering 125W power, 50V, and 3A current output, designed for seamless expansion within its safe range, it offers exceptional adaptability with various EcoFlow portable power stations. Revolutionary N-Type TOPCon Solar Cells & Dual-Sided Design Maximize Energy Generation With N-Type TOPCon technology, achieve up to 25% conversion efficiency. The dual-sided design generates Max. 138W[2] bifacial output, capturing more solar energy. Coated with Protective Lamination & Tempered Glass Durable, All-Weather Design Built with robust anti-corrosive aluminum frame, TOPCon cells feature 1.1mm ultra-thin tempered glass for excellent light transmission, POE films for UV and moisture resistance, PET backsheets for durability. The panel is IP68-rated with waterproof XT60-W connector, ensuring robust, weather-resistant performance. Flexible, Lightweight Design for Adjustable Power Needs The 500W setup weighs only 37 lbs (16.8 kg) . The modular design enables flexible power configuration. For situations requiring less than 500W or a lighter setup, the system can be split into individual panels, offering both flexibility and reduced weight. Featuring 3M™ Dual Lock™ Reclosable Fasteners[3], ensures quick and steady assembly, and the protective bag makes transport and storage effortless. Universally Compatible Solar Cable Plug and Play with Your Power System Easily connect to third-party solar systems using the included photovoltaic connector (MC4 compatible）[4]. Safely charge your power systems and portable power stations with XT60 connectors, featuring waterproof, touch-safe, anti-leak technology for reliable performance. EcoFlow 125W Bifacial Modular Solar Panel Charging Times Specs Rated Power: STC 125W (±3W) BNPI 138W (±3W) Open Circuit Voltage: 50V Short Circuit Current: STC 3.2A BNPI 3.4A Optimal Operating Voltage: 43V Optimal Operating Current: STC 3ABNPI 3.2A Recommended Ambient Temperature: -40°C to 85°C Efficiency: 25% Bifaciality Coefficients: 80%±5% Weight: Approx. 4.2 kg Dimensions (L×W×H): 612×1154×22 mm Maximum System Voltage: 600V DC (IEC/UL) Cell Type: TOPCon monocrystalline silicon Connector Type: XT60 Waterproof & Dustproof Rating: Solar Panel IP68 XT-60 Connector IP68 Warranty (AU): 5 Years Lifespan: 30 years, 90% What's In The Box EcoFlow 125W Bifacial Modular Solar PanelQuick Start Guide, Safety Instructions & Warranty CardEcoFlow XT60i to XT60i Extension Charging Cable ×1 Footnotes: [1] Tested under optimal conditions.[2] The maximum combined power output of the 125W bifacial panel is 138W. Under the same lighting conditions, the bifacial panel can generate up to 10% more power on the rear side compared to a single-sided panel, calculated as (138-125)/125 * 100% = 10.4%.[3]The term "3M" and "dual lock" are both trademarks belonging to the 3M Company, also known as the Minnesota Mining and Manufacturing Company.[4] Included with the 500W (125W × 4) bifacial modular solar panel set.  

Read more less

Specs - EcoFlow WAVE 3 Add-On Battery Net Weight: Approximately 9.7 kg (21.4 lb ) Dimensions: 516×281×111 mm(20.3×11.1×4.4 in) Battery Capacity: 1024Wh 51.2V 20Ah Battery Chemistry: LFP Cycle Life: 80%+ capacity after 4000 cycles Maximum Input Power: 1000W Max Automobile Auxiliary Power Outlet Charging Input: 12V/24V,8A Max, 200W Max Solar Input: 11-60V, 13A Max, 400W Max Maximum Output Power: 858W Max USB-A Output: 5/9/12V, 2.4/2/1.5A, 18W Max USB-C Output: 5/9/12/15V⎓3A Max; 20V/28V⎓5A Max, 140W Max Charge Temperature: 0-45℃ (32-113℉) Discharge Temperature: -10-50℃ (14-122℉) IP Rating: IP65 What's In The Box?

Read more less

Why EcoFlow WAVE 3 Stands Out Built for Every Scenario Rapid cooling and heating 6100 BTU cooling power & 6800 BTU heating power Drop 8°C/15℉ in just 15 minutes,¹ with 6100 BTU power, setting an ideal environment for any scenario. Quickly warm up with 6800 BTU heating, raising the temperature by 9°C/17°F in just 15 minutes,² perfect for staying cosy during chilly outdoor activities like autumn camping. 8 Hours of Wireless Comfort 1024Wh LFP Add-On Battery (Sold separately)* The add-on battery offers up to 8 hours of uninterrupted use [3]—perfect for a full night of restful sleep. High-quality LFP cells ensure a lifespan of up to 10 years in daily use. It's All on the App Easily manage everything from real-time battery status to water drain notifications, mode changes, and scheduled shutdowns—all from your phone, no matter where you are. Intelligent Modes for Maximum Comfort Automatic Function Automatically switches to heating when temperatures drop, keeping you cozy even on chilly mountain camping trips, ensuring a good night's sleep. Pet Care Set a temperature range of 35-45°C via the app to protect your pet from heatstroke indoors. Once the set temperature is exceeded, WAVE 3 automatically starts cooling and sends you an app notification. Dehumidification Function Adjusts humidity to your desired level, so you can stay comfortable, even during rainy seasons. Sleep Mode Operates at just 44 dB, about the same as a quiet conversation, ensuring peaceful rest. Water Drain Alert When the water tank nears full, the app sends a reminder to drain it, ensuring optimal performance. Endless Cooling On the Go Fast charging in just 75 min By combining AC charging and solar charging, the Add-On Battery can be fully charged in as fast as 75 minutes. With the EcoFlow Alternator Charger, you can charge while driving—1 hour of driving, and stay comfortable all night. * The EcoFlow WAVE 3 Add-On Battery is sold separately. Solar Charging (400W) Fully charged in 3 hours. Charging port: XT60 on the Add-On Battery. EcoFlow Alternator Charger (400W/800W) Charge while driving. In 102 minutes, you're ready to go. Charging port: Both WAVE 3 and Add-On Battery (not recommended to use WAVE 3 directly due to unstable power). AC Charging (700W) Fully charged in 2 hours. Charging port: XT150 on WAVE 3 and Add-On Battery. Car Power Outlet (100W) Emergency charging in 10 hours. Charging port: XT60 on the Add-On Battery. Specs Net Weight: Approximately 15.3 kg (33.7 lb) Dimensions: 519×297×336 mm(20.4×11.7×13.2 in) Cooling Capacity: 1800W (6100BTU) Heating Capacity: 2000W (6800BTU) Temperature Setting Range: 16-30℃ (60.8-86℉) Refrigerant/Amount: R290/112 g (R290/0.25 lb) Air Volume: 330m³/h Rated Cooling Power (AC/DC): 690W/640W Rated Heating Input Power (AC/DC): 645W/606W Cooling Efficiency (AC/DC):2.6/2.8 Heating Efficiency (AC/DC): 3.1/3.3 AC Input: 100-240V~50/60 Hz, 820W Max Add-on Battery Input: 700W Max Operating Temperature ;5-50℃ (41-122℉) IP Rating: IPX4 Noise Level: 44-58 dB Remote Control: App (Wi-Fi(2.4G, 5G), Bluetooth) Run Time with EcoFlow Add-On Battery: 2-8 hr What's In The Box? EcoFlow WAVE 3

Read more less

Core rules for playing games of Warhammer: The Horus Heresy Everything you need to know to collect, paint, and play through the epic civil war that changed the course of galactic history Packed with epic photography and background material covering the Age of Darkness Includes rules and missions to play out brutal battles, including dynamic Challenges, Reactions, Core Special Rules, and Psychic Disciplines The Imperium stretches across countless worlds, a newborn empire on the brink of ultimate victory. Yet at the peak of this golden age of conquest, the galaxy has been plunged into an Age of Darkness. Horus Lupercal, Warmaster of the Emperor's armies, has turned against his gene-father, and the eighteen Space Marine Legions, once united in a Great Crusade to consolidate all Humanity beneath the Emperor’s banner, are riven by betrayal. This is the Horus Heresy – the bloodiest conflict Humanity has ever known. Civil war on a galactic scale, in which superhuman soldiers clad in advanced armour turn devastating weapons upon those they called brothers. Where do your loyalties lie?Warhammer: The Horus Heresy is a miniatures wargame that pits mighty armies against each other in apocalyptic tabletop battles. Choose your favoured Loyalist or Traitor faction – from the knightly Dark Angels to the duplicitous Alpha Legion – or from the massed ranks of the Solar Auxilia and the war machines of the Legio Titanicus. Build your army from a range of spectacular miniatures, and clash with fellow players in wargames of staggering tactical depth.This 352-page hardback book contains:– Background and lore: Extensive information about the Age of Darkness, the Legiones Astartes, other factions, a timeline, inspiring artwork, and miniatures photography.– Basic principles: The Core Rules for Warhammer: The Horus Heresy.– Advanced principles: Rules for Tactical Statuses, Reactions, Psychic Abilities, Vehicles, and Battlefield Terrain.– Rules of battle: A guide to the phases of the game.– Battles in the Age of Darkness: Instructions on how to build your army.– Core Mission Pack: Three Core Missions, three Deployment Maps, and a variety of Secondary Objectives for your games.– Armouries of the Age of Darkness: Special Rules for Warhammer: The Horus Heresy and Psychic Powers for the six Psychic Disciplines.

Read more less

A Heavy Support choice for the Space Marines Designed to destroy tough, high-value targets Can instead be assembled as a Gladiator Valiant or Gladiator Reaper With pinpoint accuracy, the Gladiator Lancer picks off the heaviest enemy armour, the laser destroyer punching smouldering holes in their hulls. Such is the range of its heavy cannon that it can eliminate threats to the Space Marines before they encounter them, storming past burning wrecks to claim their objectives.Like the Predator is to a Rhino, the design of the Gladiator is based upon that of an Impulsor’s chassis, and has been designed to serve as a front line battle tank rather than a transport vehicle. If you're looking to shore up your batteline while offering some formidable fire support, a Gladiator will fit the role perfectly! The Lancer-pattern Gladiator is armed with a turret-mounted laser destroyer, making it the perfect choice for obliterating monsters, tanks or other high-value targets from extreme range.This set is supplied in 157 plastic components and also contains 1x Citadel 100mm Round Base and 1x Clear Tank Hover Stand. A Primaris Vehicle Transfer Sheet is also included. This kit can alternatively be used to assemble a Gladiator Valiant, Gladiator Reaper or an Impulsor.

Read more less

USB-C to Lightning 2m cable for iPhone 13, iPhone 12, iPhone 11, iPhone X, iPhone XR, iPhone Xs/ Xs Max, iPhone 8/8Plus, iPad and more. Supports Power Delivery (PD) fast charging for use with USB-C PD ChargersApple MFi certified PD Lightning ConnectorDurable AluBraid™ nylon cable jacketHeavy duty and Tangle FreeTested to withstand more than 20,000 bend cyclesUp to 30W PD fast chargingSupports High-Speed USB 2.0 Data2 Meter (6.6ft) cable length

Read more less