Designed for Outdoor ActivitiesThe Nitecore HA11 Headlamp is the ideal for outdoor activities. It produces up to 240 lumens of light that reaches 98 yards with 3 brightness levels, giving you peace of mind on those late night runs, or camping and hiking expeditions. The secondary red LED can be instantly accessed for low light condition map viewing, emergency response, signaling or night photography. Additionally, the ultra lightweight shock cord is highly reflective and phosphorescent so it glows in the dark, keeping you safe and visible at night.Compact Ultralight HeadlampIt weighs only 1.27 oz with the battery included. You can comfortably wear the headlamp for an extended period of time with the shock cord or use the included clip attachment to snap it onto a hat, or backpack strap. The durable unibody frame is impact resistant with a waterproof rating of IP66, ready for any tough outdoor environment.Easy to Operate, Easy to MaintainThe Nitecore HA11 is powered by just one commonly available and economical AA battery This high efficient headlamp can run up to 40 hours on its lowest setting covering over a full day of use. Use one switch to activate the headlamp and cycle through its three brightness settings and conquer the darkness.What's in the box:• HA11• Headband• Clip• AA BatteryNITECORE HA11 At-A-Glance• 240 lumen ultralight headlamp• Instant access red LED• Single AA battery powered• Reflective and phosphorescent shock cord• 40 hour runtime max
NITECORE NL2150HPi At-A-Glance - >15A max continuous discharge current - Built-in pressure relief valve - Microporous barrier for heat dissipation - Built-in PTC for surge protection - Nickel-plated stainless steel cathode and anode - This is the battery that is included in the I4000R Flashlight Compatible Lights - P10i - P20i - P30i - P20i UV - P10iX - P20iX >15A High Capacity Performance Battery The next generation 21700 customized rechargeable battery from NITECORE, the NL2150HPi has an amazing 5000mAh capacity. This powerful battery has improved performance, and superior energy density compared to previous 18650 batteries. Specifically designed for the i4000R, the "i" series batteries can work with any other NITECORE flashlight that accepts 21700 batteries. An extra 21700 is a great backup battery to have on hand, as more electronic products and NITECORE flashlights will utilize this battery. The NL2150HPi can be charged using a traditional charger like a NITECORE UI1 or through the i4000R's built in charging port.
Premium Quality Battery The NITECORE NL2150HPi comes with all of the safety features, quality engineering, and more that has made NITECORE a trusted brand for rechargeable Li-ion batteries. Your expensive electronics are safe paired with an NL2150HPi that features a built-in pressure relief valve, high-temperature resistant design, and built-in safeguards to prevent surges. This protects you from overcharging, over-discharging, as well as short-circuits. The NL2150HPi is built with premium materials, such as nickel-plated stainless steel connectors for impact resistance, good conductivity, and resistance against oxidation. Safe and reliable, the NL2150HPi is globally insured and has multiple certifications for electronic use.
TECHNICAL SPECIFICATIONS Capacity 5000mAh Voltage 3.6V Output 15A Weight 2.66oz (75.5g) Length 3.04in (77.2mm) Diameter 0.86in (21.9mm)
Compatible Chargers NITECORE UMS2 Dual Slot Digital Charger NITECORE UMS4 Quad Slot Digital Charger NITECORE UI1 Single Slot Charger NITECORE UI2 Dual Slot Charger
Battery Compatibility This is a customized button top battery designed for i series flashlights (see compatible lights section above). It does NOT work in any non-flashlight device. It does NOT work in any flashlights that require a custom battery. It does NOT work in any electronics that only accept flat top batteries. It can be charged in a lithium-ion charger such as UI1, UI2, UMS2, UMS4
Revolutionary and powerfully upgraded
As a patent product developed by NITECORE the 21700 I series battery is a proprietary 21700 rechargeable Li-ion battery featuring dual way output with positive and negative polarities at both ends and a high energy density. It enables a highly efficient output by minimizing the loss of power due to internal resistance.
Unprecedented Battery Performance
The dual polarities of the 21700 I series battery at both ends have broken the convention of linking the head and the tail of the flashlight in order to minimize its size and weight. The internal resistance is therefore greatly reduced to offering a direct energy conversion to power the device
Safety Features
Microporous barrier protects delicate internal components, coated with durable metallic film to guard against abrasion
Mercury free, lead free and cadmium free, low cost and environmentally friendly
Can be recharged over 500 times.
Specifications
• Capacity: 5,300mAh
• Voltage: 3.6V
• Continuous Discharge Current: 20A MAX
• Length: 77.2±0.3mm / 3.04"±0.01"
• Diameter: 22.2±0.3mm / 0.87"±0.01"
The NU05 v2 quad LED signal light is the perfect blend of style and function with two bright white LEDs and two red LEDs. The dual white LEDs can be activated for a 40 lumen max with constant on mode as a simple flashlight or headlamp, or flashing mode as a simple signal. The dual red LEDs can be activated on slow flashing or fast flashing modes depending on your speed or visibility conditions. The ultra lightweight NU05 v2 with its sturdy rear clip can be attached to bags, caps, cats, or belts and of course, can be used with the included strap as a rudimentary headband, or wrist light. The perfect companion for walks, runs, jogs, or midnight excursions.
• 40 lumen signal and safety light
• Red or White, flashing or constant light
• USB-C rechargeable
• Ultra lightweight and compact
The NU05 v2 kit package comes with the NU05 v2 signal light as well as the lightweight and breathable Nitecore elastic headband, simple bike mount, and USB-C charging cable. This gives you all of the options to fully utilize the NU05 v2, in a variety of situations. The NU05 v2 retains the same ultra compact and lightweight form factor, at just over an inch on either side, and weighing only four tenths of an ounce. However, it has been upgraded to a bigger battery that can power the signal light for over 47 hours, nearly two full days of runtime. The integrated USB-C port now allows for fast charging for even faster usage. The battery indicator can also be activated with a single tap of the button to let you know of charge status.
• LONG THROW TACTICAL FLASHLIGHT - The Nitecore SRT7i emits up to 3000 lumen beam with a throw of over 634 yards.
• USB-C RECHARGEABLE - fast charging waterproof USB-C port, max runtime of over 3 hours on turbo and 800 hours on ultralow. A battery status indicator reminds you it’s time to recharge.
• SMART SELECTOR RING- supports single hand operation with stepless brightness adjustment from 1 to 3000 lumen and quick access to the strobe and turbo. Guarded tail cap for tail stand capability.
• READY FOR ACTION - Rated IP68 waterproof to use safely in any climate, Impact resistant up to 2 meters. A stainless steel bezel with three silicone nitrided inlays for glass breaking.
Contents: Nitecore SRT7i with Battery, USB-C Charging Cable, Holster, Clip, Lanyard, a lumentac Organizer
Max Output 3,000 Lumens
Max Beam Distance 580 Meters
Max Beam Intensity 87,500 cd
Max Runtime 800 h 0 m / 33.33 d
Reflector SMO
Battery 1 × 21700i, 2 × CR123, 2 × RCR123
Special Modes STROBE
Beam color White Light
Length 163 mm / 6.42 in
Head Size 40 mm / 1.57 in
Weight 175 g / 6.17 oz
Feature STROBE READY, Rechargeable, Tail Stand, Smart Selector Ring
Activity Gear, Law Enforcement, Search, Outdoor/Camping
Note: Diffusion (Mist) Strength of 1/8 with VND
Optics: Pure High Definition Optical glass 18Layers Multicoated ensure filmmaking experience
Built: Hard stop Variable ND eliminates any chance of cross-polarization & zero vignetting (16mm above) during the shoot
Function: 6-9 Stop equivalent to ND64-ND512 is the ultimate all-day solution from cloudy days to a bright sunny day for all your videography needs
What is included: Variable ND Filter, Hard Case, Lens Cap, Cleaning Cloth
Note: Diffusion (Mist) Strength of 1/8 with VND
Optics: Pure High Definition Optical glass 18Layers Multicoated ensure filmmaking experience
Built: Hard stop Variable ND eliminates any chance of cross-polarization & zero vignetting (16mm above) during the shoot
Function: 6-9 Stop equivalent to ND64-ND512 is the ultimate all-day solution from cloudy days to a bright sunny day for all your videography needs
What is included: Variable ND Filter, Hard Case, Lens Cap, Cleaning Cloth
NOTE: ALL REPLACEMENTS WILL TAKE 3 - 4 WEEKS FROM THE TIME YOUR CLAIM IS RECEIVED. CARE REFRESH IS A NON-REFUNDABLE AND NON-RETURNABLE ITEM, ONCE CODES HAVE BEEN SUPPLIED THEY CAN NOT BE RETURNED.
FEATURES
Provides two replacement units for an additional charge as per the table below. The Care Refresh 1-year Plan lasts for one year from the date it is bound to your product, and covers for accidents such as water damage or collisions, letting you fly with peace of mind.
DJI Care Refresh 1-Year Plan
ReplacementService
Number of Replacements
2
Number of Flyaway Replacements
1
Replacement Fee
$219.00
Flyaway Replacement Fee
$439.00
Extended Warranty Period
Official warranty is provided during the validity period
Support Renewal?
Renew 1-Year Plan up to twice
Please Note:
DJI Care Refresh can be bound to your DJI product when it meets one of the following criteria:
Brand new and un-activated product.
Aircraft or gimbal activated within the last 48 hours.
Handheld device activated within the last 30 days.
*If your craft has been activated for over 48 hours, follow the instructional guide linked below to verify your craft is in good working order and still eligible for DJI Care Refresh.
Video Verification Guide
Each time you request a replacement, you’ll receive a replacement unit that is new or equivalent to new in performance and reliability.
If you have a DJI Care Refresh activation code, click here to bind it to your aircraft.
WATER DAMAGE COVERAGE
We'll replace your aircraft if an accident occurs, even if it's damaged by water.
TWO REPLACEMENTS, TOTAL PEACE OF MIND
For an additional charge, DJI Care Refresh offers up to two replacement units within one year and covers accidents such as water damage, crashes and collisions. These replacement units will be new or equivalent to new in performance and reliability.
DJI CARE REFRESH REPAIR PROCESS
Ferntech will handle the entire DJI Care Refresh replacement process, which is as follows:
Request a Care Refresh replacement via our online Service Request Form
Delivery of damaged item* – please contact our helpful team at info@ferntech.co.nz and they will provide details on how to get your product to us.
Product assessment by Ferntech team – upon completion, we will select the cheapest option to either have your product repaired or replaced under your DJI Care Refresh policy. Please advise if you would like to have your product replaced even if a repair is cheaper.
*We require your product to complete the DJI Care Refresh process.
Please Note:
DJI Care Refresh covers return shipping fees back to your address.
DJI Care Refresh and the corresponding product must be purchased from New Zealand.
DJI Care Refresh only supports aircraft purchased from official or authorised channels.
Please find detailed terms and conditions under the warranty tab above.
If you want to purchase DJI Care Refresh for an aircraft that has been activated for over 48 hours, follow this Video Verification Guide.
DJI FLYAWAY COVERAGE (DRONE NOT RECOVERED)
Care Refresh offers 1x Flyaway Cover if your DJI Avata 2 is not recovered. To have Flyaway Cover active you need to bind your craft and remote controller to your DJI account by following this video.
For any Flyaway case, you will need to lodge a Flyaway report through the DJI Fly application and then contact us.
Overview
The Zignes solar panel leverages solar energy to eco-recharge the DJI Power-series power stations, with a single panel reaching a max charging output of 120 W.
Featuring a foldable design, it is convenient to store and transport, and comes with a stand for easy setup without the need for additional supports.
It includes a 3m extension cable, allowing users to freely position it in well-lit areas for flexible placement.
Designed with an IP65 rating for dust and water resistance, it accommodates a variety of everyday use scenarios.
Tips
Zignes 120W Solar Panel requires the use of a DJI Power Solar Panel Adapter Module (MPPT) or a DJI Power Car Power Outlet to SDC Power Cable (12V/24V)
for connection to the DJI Power-series power stations. Purchase the accessories as needed.
Each DJI Power Solar Panel Adapter Module (MPPT) can then connect to one to three solar panels, while the DJI Power Car Power Outlet to SDC Power Cable (12V/24V) can connect to one solar panel at most.
After-sales Service:
Return Period: 30 days (from the date of receipt of the package)
Exchange Period: 30 days (from the date of receipt of the package)
Warranty Period: 2 years (for EU regions);
1 year (for other regions)
* After-sales services are provided by DJI.
In The Box
Zignes 120W Solar Panel × 1
Specifications
Rated Power: 120 W
Open-circuit Voltage: Max 26 V
Short-circuit Current: Max 7 A
Weight: Approx. 5.6 kg
Unfolded Dimensions: 1365×580×36 mm (L×W×H)
Folded Dimensions: 365×580×70 mm (L×W×H)
Operating Temperature: -20° to 60° C (-4° to 140° F)
Compatibility
DJI Power Solar Panel Adapter Module (MPPT)
DJI Power Car Power Outlet to SDC Power Cable (12V/24V)
Overview
To connect car power outlet to SDC or SDC Lite port on a DJI Power-series power station for charging the latter after the car starts.
The accessory described comes in two parts: one XT60 to SDC Module, and one Car Power Outlet to XT60 Power Cable. The XT60 to SDC Module can also act as a solar panel adapter module (MPPT), suitable for connecting one Zignes 100W/120W Solar Panel.
In The Box
XT60 to SDC Module × 1
Car Power Outlet to XT60 Power Cable × 1
Specifications
Input specification: 12-30 V, DC
Max Output Power: 65 W
Operating Temperature: -10° to 45° C (14° to 113° F)
Compatibility
DJI Power 1000
DJI Power 500
Overview
Designed for storing DJI Power 1000, it is convenient for single-handed carrying. The back has a dedicated space for cable management, which makes it user-friendly. Additionally, the left and right handles are equipped with venting openings. With the zipper opened, there's no need to remove the DJI Power 1000 from the case to operate it.
It also features a flip-up design at the panel location of DJI Power 1000, which covers the power ports to protect against accidental splashes and raindrops.
In The Box
DJI Power 1000 Protective Storage Bag × 1
Specifications
Dimensions: 452×240×232 mm (L×W×H)
Compatibility
DJI Power 1000
DJI Power 1000 V2
This Carry Case from Insta360 is a compact case that fits the X4, spare batteries, fast charging hub, cables, and 85cm selfie stick. Its soft fabric exterior keeps it lightweight and stylish, and it closes with a single zipper. Inside, a molded insert provides slots for the 85cm selfie stick, fast charging hub, and camera, and on the lid is a mesh pocket for additional accessories such as spare batteries and cables. There's a built-in fabric wrist strap on the exterior.
CompatibilityX4
PRODUCT SPECIFICATIONS
Outer material: Fabric, ethylene-vinyl acetate and velvetInner material: Jersey fabric and ethylene-vinyl acetateWeight: 260gDimensions: 232x157x67mm
IN THE BOX
Insta360 X4 Carry Case × 1
Recharge up to three batteries for your X4 camera in just 43 minutes using this Fast Charge Hub from Insta360. The hub can charge three 2290mAh batteries simultaneously. The USB-C port supports PD fast charging, which can get your batteries to 80% charged in 26 minutes. LED indicators display the status of each battery slot for easy monitoring. Use the included USB-C cable to connect the hub to a power source of your choice.
CompatibilityX4 Battery
Film improved diving shots from deep below the surface of the water using this Invisible Dive Case from Insta360. Custom-fit to your X4 camera and designed to compensate for water refractions, the clear case maintains the visibility of your touchscreen and controls while ensuring seamless 360° video. It is capable of being submerged up to 50m. A built-in 2-prong mount attaches the case to selfie sticks or mounts of your choice and can be adapted to a 1/4"-20 compatible thread with the included adapter.
CompatibilityX4
The Insta360 Quick Reader for X4 is a convenient accessory for your X4 action camera that enables you to save and transfer footage without draining your camera's battery. With this reader, you can easily store data by inserting a microSD card and connecting it to the USB-C port of your X4. This allows you to capture footage directly onto the device while shooting. To conveniently preview and edit the footage on the move, just connect the compatible mobile device with a Lightning or USB-C connector and launch the Insta360 app. Moreover, you can also transfer and access files through a personal computer.
CompatibilityX4Apple or Android Devices
How to use:
1. Before use, insert a microSD card into the Quick Reader.
2. Connected to a camera
The Quick Reader serves as an external SD card that videos and photos can be saved to directly while shooting.
a. Turn on the camera. Remove the camera's Lock Cover and insert the Quick Reader. A prompt "The Quick Reader connected" will appear on the touchscreen when the Quick Reader has connected.
b. When finished, disconnect the Quick Reader and replace the Lock Cover.
3. Connected to a phone or tablet
Files on the Quick Reader can be played and edited directly in the Insta360 app, allowing for faster processing speeds.
a. Download the Insta360 app on a phone or tablet.
b. Connect the Quick Reader and open the Insta360 app.
· On IOS: Quick Reader files can be accessed directly.
· On Android: Within the Insta360 app, tap Settings > Quick Reader Settings > Choose directory > Use this Folder to play and edit the files. (On some phones, you will need to tap in the upper left corner, select with its corresponding disk, then click Use this Folder.)
4. Connected to a computer
Quick Reader files can be fully accessed on a computer, and files can be transferred between the two devices.
*Notes:
1. Even if there is a microSD card in the camera, data will be saved to the SD card in the Quick Reader when it is connected to the camera.
2. When your camera first connects to the Quick Reader, it will take some time to load.
3. If the Quick Reader is disconnected while shooting, the file will not be saved.
4. Quick Reader may disconnect during intense action or movement. Please use with caution.
5. When the Quick Reader is connected, your camera will no longer be waterproof. To protect your camera, we advise you to avoid using it on rainy days and to keep it dry.
6. With some phone manufacturers, such as OPPO, you will need to enable OTG in the phone's settings before using the Quick Reader.
7. Devices that don't support exFAT, such as Google Pixel phones, cannot read the files saved on the Quick Reader.
8. To ensure a solid connection, it is recommended to remove phone/tablet covers before using with the Quick Reader.
9. Some vivo phones are not compatible with this Quick Reader, please consult Insta360's customer service team for details.
10. It is recommended to use official Insta360 microSD cards.
QUAD LOCK QUAD LOCK CASE IPHONE 8/7 Plus
Protect your iPhone from the elements with the Quad Lock Poncho.
PROTECT YOUR IPHONE FROM THE ELEMENTS
Made from a tough TPU (thermoplastic polyurethane), the Quad Lock Poncho is designed to keep your iPhone screen and ports safe from mud, dust and rain.
DURABLE MATERIAL
Simply slip it on when you need it and stow it away when you don't. The TPU material is very durable so you can store the Poncho in your pocket or bag without damaging it.
ACCESSIBILITY
The crystal clear TPU makes it easy to view apps on-the-go and is fully functional with your iPhone's touch screen / buttons.
Please Note: Use of a screen protector in combination with the Poncho may affect touch screen usability
The Quad Lock® Bike Mount is the lightest, strongest and most secure smartphone bike mount on the market.
SECURE MOUNTING
Featuring a patented dual-stage lock, you can ride with confidence over bumps and jumps knowing that your smartphone isn’t going anywhere your bike isn’t.
QUICK TO ATTACH / DETACH
Simply twist and lock to view apps such as Strava®, MapmyRide or Apple® maps as you ride. Detach just as easily so you don’t miss a photo opportunity or important phone call.
SLEEK DESIGN
At just 23mm tall and 35mm wide, the Quad Lock® Bike Mount fits seamlessly onto the stem or handlebar of your bike.
Capture epic first person shots completely hands-free.
Adjustable and comfortable non-slip design.
GO 3/GO 3S must be assembled with the Quick Release Mount.
GO 2 must be assembled with the Action Mount Adapter.
IN THE BOX
Insta360 Chest Strap x 1
SDR Transmission, Stable & Anti-Interference
DJI SDR Transmission utilizes SDR technology to offer enhanced stability, interference resistance, and penetration capabilities. It also supports transmitting directly to smartphones or tablets via Wi-Fi.
Strong Penetration, Extended Transmission Distance
DJI SDR Transmission features a transmission distance of up to 3 km/10,000 ft, [1]suitable for wide-area mobile filming scenarios, and advanced penetration capabilities.
20Mbps High Bitrate, 1080p FHD Image Quality
DJI SDR Transmission supports 1080p/60fps video specifications with a transmission bitrate of up to 20 Mbps [2] and a minimal latency of just 35 ms. [3]
Innovative USB-C Monitoring Experience
DJI SDR Transmission introduces a USB-C output monitoring method. Users can now use a USB-C cable to connect the receiver to a smartphone or tablet.
Broadcast Mode, Unlimited Number of Receivers
In Broadcast mode, each transmitter can connect to an unlimited number of receivers, providing a high-quality monitoring experience.
Specs
Transmitter
Weight
Approx. 145 g (including antennas)
Dimensions
86.5×64×32 mm (L×W×H, excluding antennas)
Ports
SDI Input PortHDMI Input Port3.5mm Stereo JackUSB-C Firmware Update PortUSB-C Power and Gimbal Communication Port
Operating Frequency
SDR Operating FrequencyNon-DFS Frequency Band:2.4000-2.4835 GHz5.725-5.850 GHzDFS Frequency Band:5.470-5.725 GHz5.8 GHz is prohibited in some countries/regions. Check local laws and regulations for more information. 5.600-5.650 GHz is not used.Wi-Fi Operating Frequency2.4000-2.4835 GHz5.150-5.250 GHz
Transmitter Power (EIRP)
SDR:2.4000-2.4835 GHz:< 30 dBm (FCC)< 20 dBm (SRRC/CE/MIC)5.470-5.725 GHz:< 30 dBm (FCC)< 23 dBm (CE/MIC)5.725-5.850 GHz:< 30 dBm (FCC)< 14 dBm (CE)＜30 dBm (SRRC)Wi-Fi:2.4000-2.4835 GHz:< 26 dBm (FCC)< 20 dBm (SRRC/CE/MIC)5.150-5.250 GHz:< 26 dBm (FCC)< 23 dBm (SRRC/CE/MIC)
Wi-Fi Protocol
802.11b/a/g/n/ac/axSupports 2×2 MIMO Wi-Fi
Max Bandwidth
SDR:20 MHzWi-Fi:20 MHz
Max Bitrate
SDR:20 Mbps*Wi-Fi:8 Mbps* Measured in Control mode, with Broadcast mode turned off.
Power Consumption
8.2 WMeasured at a room temperature of 25° C (77° F), when linked in Control mode, at a distance of approximately 10 meters, in a 1T1R setup, with Wi-Fi turned off, using PD for power supply.
Power Supply
USB-C Power Supply Type 1: 9 V, 2 A (PD protocol)USB-C Power Supply Type 2: 6.8-17.2 V DCNP-F Battery Power Supply Voltage: 6.8-8.4 V
Input Video Format
1080p: 23.98/24/25/29.97/30/50/59.94/60fps1080i: 50/50.94/60fps (1080i is not available in Broadcast mode).720p: 50/59.94/60fps
Input Audio Format
SDI embedded, HDMI embedded
Video Transmission System
SDR + Wi-Fi
Video Transmission Latency
SDR:80 ms* (including camera and screen display latency)35 ms* (excluding camera and screen display latency)Wi-Fi:110 ms*** Measured when shooting 1080p/60fps video with Broadcast mode turned off.** Measured when shooting 1080p/60fps video.
Video Coding Format
H.264
Max Transmission Distance
SDR:3 km (FCC)*2 km (CE/SRRC/MIC)*Wi-Fi:200 m* Measured in Control mode, with Broadcast mode turned off.
Operating Temperature
-10° to 40° C (14° to 104° F)
Receiver
Weight
Approx. 145 g (including antennas)
Dimensions
86.5×64×32 mm (L×W×H, excluding antennas)
Ports
SDI Output PortHDMI Output Port3.5mm Stereo JackUSB-C Firmware Update and Video Output PortUSB-C Power Port
Operating Frequency
SDR Operating FrequencyNon-DFS Frequency Band:2.4000-2.4835 GHz5.725-5.850 GHz5.8 GHz is prohibited in some countries/regions. Check local laws and regulations for more information.
Transmitter Power (EIRP)
SDR:2.4000-2.4835 GHz:< 30 dBm (FCC)< 20 dBm (SRRC/CE/MIC)5.725-5.850 GHz:< 30 dBm (FCC)< 14 dBm (CE)< 23 dBm (SRRC)
Max Bandwidth
20 MHz
Max Bitrate
20 MbpsMeasured in Control mode, with Broadcast mode turned off.
Power Consumption
8.3 WMeasured at a room temperature of 25° C (77° F), when linked in Control mode, at a distance of approximately 10 meters, in a 1T1R setup, with Wi-Fi turned off, using PD for power supply.
Power Supply
USB-C Power Supply Type 1: 9 V, 2 A (PD protocol)USB-C Power Supply Type 2: 6.8-17.2 V DCNP-F Battery Power Supply Voltage: 6.8-8.4V
Output Video Format
1080p: 23.98/24/25/29.97/30/50/59.94/60fps1080i: 50/50.94/60fps (1080i is not available in Broadcast mode).720p: 50/59.94/60fps
Output Audio Format
PCM
Video Transmission System
SDR
Video Transmission Latency
80 ms (including camera and screen display latency)35 ms (excluding camera and screen display latency)Measured when shooting 1080p/60fps video with Broadcast mode turned off.
Video Coding Format
H.264
Max Transmission Distance
3 km (FCC)2 km (CE/SRRC/MIC)Measured in Control mode, with Broadcast mode turned off.
Operating Temperature
-10° to 40° C (14° to 104° F)
In the Box
DJI SDR Transmission Transmitter (TX) × 1
DJI SDR Transmission Receiver (RX) × 1
USB-A to USB-C Cable (43 cm) × 1
TX Camera Mounting Adapter Plate × 1
TX Gimbal Mounting Adapter Plate × 1
85CM INVISIBLE SELFIE STICK
Wider angles in your pocket.
NOW YOU SEE IT...
...now you don't! The Invisible Selfie Stick automatically disappears from 360º footage for impossible follow-shots and third-person angles.
WIDER ANGLES.
Extends to 850mm for a wider, more natural angle. Perfect for selfies and high-angle shots.
PORTABLE AND POCKET-SIZED.
Folds down to the size of your hand for easy on-the-go storage, ready to use anytime, anywhere.
GET A GRIP.
Includes a removable Selfie Stick Sleeve for a more comfortable grip, especially when using it for long periods of time.
UPGRADED STRENGTH.
More stable and reliable for high-intensity action.
PRODUCT SPECIFICATIONS
Colour: BlackWeight: 119gExtended length: 85cmRetracted length: 19.4cm
IN THE BOX
Insta360 85cm Invisible Selfie Stick × 1
It can store and charge batteries. When used with the DJI 65W Portable Charger, it can fully charge three Intelligent Flight Batteries simultaneously in just 60 minutes.With at least one battery stored, it can serve as a power bank, using the remaining battery power to charge devices such as goggles or smartphones.
TipsThe number of batteries that can be charged simultaneously depends on the power of the charger used. Using a charger of more than 45 W allows for charging three batteries at once while using a charger of less than 45 W can only charge two batteries simultaneously. Refer to the charging protocols supported by the charger.
PRODUCT SPECIFICATIONS
Input: 5-20 V, max 3 A Output (Charging): 5 V, 2 A Charging Method: Charge three batteries simultaneously (with charger of more than 45 W)
Provide efficient and stable propulsion for the aircraft.
Tips1. Mount the marked propellers onto the motors of the marked frame arms and the unmarked propellers onto the motors of the unmarked frame arms. 2. Use the screwdriver provided in the aircraft package to remove and install the screws. Unsuitable screwdrivers may damage the screws. 3. Use the new screws provided with the propellers when installing. Do not reuse the screws.
PRODUCT SPECIFICATIONS
Model: 2016S Diameter: 50.8 mm Weight: Approx. 0.68 g
