3 Wire ACC Hardwire Kit for A139 3CH/2CH with USB-C
> Parking Mode function will turns on automatically through
detecting ACC signal when the car is turned off
> 4 different adjustable Voltage for battery drain protection
> TYPE-C USB connector
Description
The Nitecore TUBE v2 LED Key Chain Flashlight (Black) is dust- and water-resistant, 1-55-lumen key chain LED flashlight. It has a single multi-stage switch that allows you to choose either a low or high output, as well as an infinitely variable output in-between when using the brightness feature. A built-in Li-ion battery charges via a micro-USB port and can provide up to 58 hours of runtime on low output or 1.3 hours on high. The light is impact resistant up to 3.3' and IP65 water-resistant. At 2.2 x 0.8 x 0.3" and just 0.3 ounces, it's about the size of a car key fob except much lighterÑyou'll never want to be without it on your key ring.
Key Features:
Low: 1 lumen.
High: 55 lumens.
100¡ beam angle.
One-year standby power.
Over-discharge protection.
Overcharge protection.
Short-circuit protection.
Integrated blue power indicator.
Specifications
Illumination Source 1 x LED
White Light Output Low: 1 Lumens
High: 55 Lumens
Battery Type 1 x Built-In Lithium-Ion
Estimated Runtime Low: 58 Hours
High: 1.3 Hours
Internal Battery Capacity 125 mAh
Charging Time 1.5 Hours
Material of Construction Polycarbonate
IP Rating IP65
Impact Resistance Yes, 3.3' / 1 m
Dimensions H: 0.3 x W: 0.8 x L: 2.2" / H: 0.8 x W: 2.0 x L: 5.6 cm
Weight 0.34 oz / 9.6 g (With Battery)
VIOFO GPS Mount for A129 & A129 Duo & A129 IR
Sync date/time and Log GPS data in your A129 Videos
GPS module is used to include the location data in the recorded videos.
If disabled, your camera will no longer measure your speed and position; nor synchronize the time /date. (Only available when connected with GPS signal)
Nitecore's quality slicone grease maintains waterproofing of your Nitecore torch. TorchMonster recommends applying silicone to your torch twice a year if its getting a lot of outdoor use. Even more so if you are working in a marine environment.
Description
This Diffuser Wand from Nitecore fits flashlights with 40mm bezel diameter. Once attached to the flashlight bezel, the diffuser will soften the light output and broaden the flashlight's angle of visibility, which is ideal for tent illumination, signalling and map reading.
The TB30 Intelligent Flight Battery is built especially for the DJI M30 series drones.
Product Description
The TB30 Intelligent Flight Battery is built especially for the DJI M30 series drones.
The self-heating TB30 battery design can support at least 400 charge cycles and allows a 41-minute flight time. Smart BS30 charging case allows quick battery charging from 20% to 90% in 30 minutes thanks to new fast charging capabilities.
An Enterprise remote controller designed for commercial drone pilots.
Product Description
A REVOLUTIONARY DJI FLIGHT CONTROL EXPERIENCE.
DJI RC Plus is a 7-inch widescreen remote control designed with commercial drone pilots in mind.
The DJI RC Plus ensures maximum environmental adaptability with an IP54 waterproof and dust-proof rating and improved internals allowing the remote to operate in temperatures from -20°C to 50°C.
INCREASED RANGE AND BATTERY LIFE
Extra range and 4G functionality
DJI RC Plus can be extended with the DJI Cellular Module to add 4G connectivity to supplement OcuSync 3 Enterprise.
Four Antenna OcuSync 3 Enterprise allows for increased transmission range and 2 removable dual-antenna allow for maximum portability when extended range is not required.
6 hours of battery life from the internal + external battery configuration, which also allows hot-swapping for seamless uninterrupted operations.
NEW RC, NEW DJI PILOT 2 APP
Revamped flight interface to improve pilot efficiency and increase flight safety.
The new redesigned interface for DJI Pilot 2 allows for one-tap access of drone and payload controls and clear presentation of flight details and navigation information allows for an improved user experience and increased flight efficiency.
Pilot 2 works seamlessly with the DJI RC Plus and DJI M30 Drone.
Screen-side and function buttons are all within reach and enable quick operations and the tap of a button, such as adjusting camera views and dropping PinPoints.
A new comprehensive pre-flight checklist helps you quickly confirm your aircraft and flight parameters, allowing you to take off with confidence.
New optimised interface displays home points, PinPoints and nearby obstacles to improve situational awareness and provide a complete picture of your operation.
Compatibility
DJI Matrice 30 Series
In The Box
IN THE BOX
DJI RC Plus × 1
The M30T is a lightweight & portable all in one drone that comes with a 12MP Wide Camera, 48MP Zoom Camera, 640 x 512px Thermal Imaging Camera and a Laser Rangefinder.
The DJI Matrice 30T combines the powerful and intelligence of the DJI Matrice 300 RTK into a portable, foldable and lightweight body. This new all in one solution allows organisations and pilots to gain new efficiencies with the new fully remote fleet management system and the autonomous docking and recharging station. The future has arrived with DJI's latest transformational technology.
The DJI M30T is integrated with multiple high-performance sensors (Wide Camera, Zoom Camera, 640 x 512px Thermal Camera and a Laser Range Finder) in an IP55 certified lightweight body. The M30T is controlled through the all new DJI RC Plus enterprise remote controller with the newly upgraded DJI Pilot 2 which has undergone significant changes for efficiency and greater flight safety.
41 Minute maximum flight time.
15 m/s maximum wind resistance & 23 m/s maximum speed.
AI Intelligence for easier operations including smart pin and track & Waypoints 2.0
7000m service ceiling to allow for high altitude operations
IP55 ingress protection.
ENVIRONMENTAL ADAPTABILITY
With IP55 protection, the M30 can easily handle adverse weather and temperatures ranging from -20° C~50° C.
SAFE & RELIABLE.
The DJI M30T has dual-vision and ToF sensors on all six sides of the aircraft, keeping it and your mission safe. There is also a built in ADS-B receiver that provides timely warnings of any incoming aircraft.
ENHANCED TRANSMISSION
Four built-in antennas support OcuSync 3 Enterprise, which enables triple-channel 1080p video transmission, and seamless swapping between input feeds, even in complex environments.Bolster your connection with DJI Cellular Module, an optional 4G dongle4 that supports stable video transmission in complex, or remote work environments.
CAPTURE EVERYTHING
The M30 Series integrates wide, zoom, and thermal cameras (M30T only) with a laser rangefinder, which together can capture the aerial data you need, when you need it.
PRO FLIGHT
The 7-inch widescreen DJI RC Plus with dual control mode is tailor-made for Enterprise users.
DJI PILOT 2
Drone and payload controls can be easily accessed with one tap. Clear presentation of flight details and navigational information improves user experience and flight efficiency.
Pilot 2 works seamlessly with the DJI RC Plus. Screenside and customizable buttons are all within reach and enable quick operations, such as adjusting camera views and dropping PinPoints.
GROUND TO CLOUD
FlightHub 2 offers a 2.5D Base Map for quick terrain awareness, One-Tap Panorama Sync for rapid site overviews, and Cloud Mapping for fast mapping in RGB or infrared.
ADVANCED INTELLIGENCE
Flight routes and missions planned in FlightHub 2 can be easily synchronized with Pilot 2. Operation data can be automatically uploaded to FlightHub 2 Media Files for unified management and analysis.
DJI DOCK (SOLD SEPARATELY)
The DJI Dock (M30 Series Dock Version7) has flagship-level performance with a maximum operation range of 7 km8, IP55 weather resistance, and resilience in temperatures ranging from -35℃ to 50℃.
Product Specifications
PRODUCT SPECIFICATIONS
AIRCRAFT
Dimensions (unfolded, excl. propellers): 470×585×215 mm (L×W×H)
Dimensions (folded): 365×215×195 mm (L×W×H)
Diagonal Wheelbase: 668 mm
Weight (incl. two batteries): 3770 ± 10 g
Max Takeoff Weight: 4000 g
Operation Frequency[1]: 2.4000-2.4835 GHz; 5.725-5.850 GHz
Transmitter Power (EIRP):
2.4 GHz: <33 dBm (FCC); <20 dBm (CE/SRRC/MIC)
5.8 GHz: <33 dBm (FCC/SRRC); <14 dBm (CE)
Hovering Accuracy (windless or breezy):
Vertical: ±0.1 m (Vision System enabled); ±0.5 m (N-mode with GPS); ±0.1 m (RTK)
Horizontal: ±0.3 m (Vision System enabled); ±1.5 m (N-mode with GPS); ±0.1 m (RTK)
RTK Positioning Accuracy (fixed RTK enabled):
1 cm+1 ppm (horizontal)
1.5 cm+1 ppm (vertical)
Max Angular Velocity: Pitch: 150°/sec.; Yaw: 100°/sec.
Max Tilt Angle: 35° (N-mode and Forward Vision System enabled: 25°)
Max Ascent/Descent Speed: 6 m/s, 5 m/s
Max Tilt Descent Speed: 7 m/s
Max Horizontal Speed: 23 m/s
Max Service Ceiling Above Sea Level (without other payload):
5,000 m (with 1671 propellers)
7,000 m (with 1676 propellers)
Max Wind Resistance: 15 m/s, 12 m/s during taking off and landing
Max Hover Time [2]: 36 min
Max Flight Time[2]: 41 min
Motor Model: 3511
Propeller Model: 1671, 1676 High Altitude (not included)
Ingress Protection Rating[3]: IP55
GNSS: GPS+Galileo+BeiDou+GLONASS(GLONASS is supported only when RTK module is enabled)
Operating Temperature: -20° to 50° C (-4° to 122° F)
GIMBAL
Angular Vibration Range: ±0.01°
Controllable Range:
Pan: ±90°Tilt: -120° to +45°
Mechanical Range:
Pan: ±105°Tilt: -135° to +60°Roll: ±45°
ZOOM CAMERA
Sensor: 1/2" CMOS, Effective pixels: 48M
Lens:
Focal length: 21-75 mm (equivalent: 113-405 mm)Aperture: f/2.8-f/4.2Focus: 5 m to ∞
WIDE CAMERA
Sensor: 1/2" CMOS, Effective pixels: 12M
Lens:
DFOV: 84°Focal length: 4.5 mm (equivalent: 24 mm)Aperture: f/2.8Focus: 1 m to ∞
THERMAL CAMERA (ONLY AVAILABLE ON MATRICE 30T)
Thermal Imager: Uncooled VOx Microbolometer
Lens:
DFOV: 64°Focal length: 9.1 mm (equivalent: 40 mm)Aperture: f/1.0Focus: 5 m to ∞
Infrared Temperature Measurement Accuracy[4]: ±2°C or ±2% (using the larger value)
FPV CAMERA
Resolution: 1920×1080
DFOV: 161°
Frame Rate: 30 fps
LASER MODULE
Wavelength: 905 nm
Max Laser Power: 3.5 mW
Single Pulse Width: 6 ns
Measurement Accuracy: ± (0.2 m + D×0.15%)D is the distance to a vertical surface
Measuring Range: 3-1,200 m (0.5×12 m vertical surface with 20% reflectivity)
VISION SYSTEMS
Obstacle Sensing Range:
Forward: 0.6-38 mUpward/Downward/Backward/Sideward: 0.5-33 m
FOV: 65° (H), 50° (V)
Operating Environment: Surfaces with clear patterns and adequate lighting (> 15 lux)
INFARED SENSING SYSTEMS
Obstacle Sensing Range: 0.1 to 10 m
FOV: 30°
Operating Environment: Large, diffuse, and reflective obstacles (reflectivity >10%)
TB30 INTELLIGENT FLIGHT BATTERY
Capacity: 5880 mAh
Voltage: 26.1 V
Battery Type: LiPo 6S
Energy: 131.6 Wh
Net Weight: Approx. 685 g
Operating Temperature: -20° to 50° C (-4° to 122° F)
Storage Temperature: 20° to 30° C (68° to 86° F)
Charging Temperature: -20° to 40° C (-4° to 104° F)(When the temperature is lower than 10° C (50° F), the self-heating function will be automatically enabled. Charging in a low temperature may shorten the lifetime of the battery)
Chemical System: LiNiMnCoO2
AUXILIARY LIGHTS
Effective Illumination Distance: 5 m
Illumination Type: 60 Hz, solid glow
REMOTE CONTROLLER
Screen: 7.02 inch LCD touchscreen, with a resolution of 1920×1200 pixels, and high brightness of 1200 cd/m2
Internal Battery:
Type: Li-ion (6500 mAh @ 7.2 V)Charge Type: Supports battery station or USB-C charger maximum rated power 65W (max voltage of 20V)Charge Time: 2 hoursChemical System: LiNiCoAIO2
External Battery(WB37 Intelligent Battery):
Capacity: 4920 mAhVoltage: 7.6 VBattery Type: Li-ionEnergy: 37.39 WhChemical System: LiCoO2
Operating Time[5]: Internal Battery: Approx. 3 hours 18 minInternal Battery + External Battery: Approx. 6 hours
Ingress Protection Rating[3]: IP54
GNSS: GPS+Galileo+BeiDou
Operating Temperature: -20° to 50° C (-4° to 122° F)
O3 ENTERPRISE
Operating Frequency[1]: 2.4000-2.4835 GHz, 5.725-5.850 GHz
Max Transmission Distance (unobstructed, free of interference): 2.4000-2.4835 GHz: 15 km (FCC); 8 km (CE/SRRC/MIC)
Max Transmission Distance (with interference):
Strong Interference (urban landscape, limited line of sight, many competing signals): 1.5-3 km (FCC/CE/SRRC/MIC)Medium Interference (suburban landscape, open line of sight, some competing signals): 3-9 km (FCC); 3-6 km (CE/SRRC/ MIC)Weak Interference (open landscape abundant line of sight, few competing signals): 9-15 km (FCC); 6-8 km (CE/ SRRC/MIC)
Transmitter Power (EIRP):
2.4 GHz: <33 dBm (FCC); <20 dBm (CE/ SRRC/MIC)5.8 GHz: <33 dBm (FCC); <14 dBm (CE); <23 dBm (SRRC)
WI-FI
Protocol: Wi-Fi 6
Operating Frequency[1]: 2.4000-2.4835 GHz; 5.150-5.250 GHz; 5.725-5.850 GHz
Transmitter Power (EIRP):
2.4 GHz: <26 dBm (FCC); <20 dBm (CE/ SRRC/MIC)5.1 GHz: <26 dBm (FCC); <23 dBm (CE/ SRRC/MIC)5.8 GHz: <26 dBm (FCC/SRRC); <14 dBm(CE)
BLUETOOTH
Protocol: Bluetooth 5.1
Operating Frequency: 2.4000-2.4835 GHz
Transmitter Power (EIRP): <10 dBm
BS30 Intelligent Battery Station
Dimensions: 353×267×148 mm
Net Weight: 3.95 kg
Compatible Battery Type: TB30 Intelligent Flight Battery, WB37 Intelligent Battery
Input: 100-240 VAC, 50/60 Hz
Output:
TB30 Battery Port: 26.1 V, 8.9 A (supported up to two outputs simultaneously)WB37 Intelligent Battery: 8.7 V, 6 A
Output Power: 525 W
USB-C port: Max. output power of 65 W
USB-A port: Max. output power of 10 W (5 V, 2 A)
Power Consumption (when not charging battery): < 8 W
Output Power (when warming up battery): Approx. 30 W
Operating Temperature: -20° to 40° C (-4° to 104° F)
Ingress Protection Rating[3]: IP55 (with the cover closed properly)
Charging Time[6]:
Approx. 30 min (charging two TB30 batteries from 20%-90%)Approx. 50 min (charging two TB30 batteries from 0%-100%)
Protection Features:
Anti-Backflow ProtectionShort Circuit ProtectionOver Voltage ProtectionOver Current ProtectionTemperature Protection
OTHER
Footnotes:
[1] 5.8 and 5.1GHz frequencies are prohibited in some countries. In some countries, the 5.1GHz frequency is only allowed for use indoors.[2] The maximum flight time and the hover time were tested in a lab environment and is for reference only.[3] This protection rating is not permanent and may reduce over time after long-term use.[4] Infrared temperature measurement accuracy was tested in a lab environment and is for reference only.[5] The maximum operating time was tested in a lab environment and is for reference only.[6] The charging time was tested in a lab environment at room temperature. The value provided should be used for reference only.
IN THE BOX
Aircraft Body x 1DJI RC Plus Remote Controller x 11671 Propeller (CW) x 21671 Propeller (CCW) x 2USB-C Cable x 1USB-C to USB-C Cable x 1Carrying Case x 1Screws and Tools x 1BS30 Battery Station x 1TB30 Battery x 2WB37 Battery x 1
The BlackVue microSD cards are optimized to work with all BlackVue dashcams.
The 128GB is compatible with all of the following dashcams:
DR900S - 1CH / 2H / 2CH IR
DR900X - 1CH / 2H / 2CH IR
DR750S - 1CH / 2CH / 2CH IR
DR750X - 1CH / 2CH / 2CH IR
DR750X TRUCK - 1CH / 2CH / 2CH IR
DR590W - 1CH / 2CH / 2CH IR
DR590X - 1CH / 2CH / 2CH IR
DR590 - 1CH / 2CH / 2CH IR
Please note regarding compatibility with older BlackVue dashcam models: although it may seem to work, we cannot fully guarantee compatibility and performance with older models.
The Blackvue Tamper-Proof Cases are designed to prevent access to critical components of the dashcam. All models block access to the microSD card slot and the power and video cable connectors on the front camera. The Tamper-Proof Cases for X Series models also allow to lock the angle of the front camera.
BTC-2B:
¥ Vertical windshield type, suitable for trucks, buses, vans, etc
¥ Windshield angle of 60¡Ð90¡ with the horizontal.
Compatible Models:
¥ DR900S-1CH AND DR900S-2CH
¥ DR750S-1CH AND DR750S-2CH
¥ DR650S-1CH AND DR650S-2CH AND DR650S-2CH IR AND DR650S-2CH TRUCK
¥ DR650GW-1CH AND DR650GW-2CH AND DR650GW-2CH TRUCK
¥ DR550GW-1CH AND DR550GW-2CH.
Analog video cables for dual-channel BlackVue dashcams.Compatible with DR590X-2CH, DR590X-2CH IR, DR590W-2CH, DR590W-2CH IR, DR590-2CH, DR590-2CH IR, DR490-2CH, DR490L-2CH.Note: For DR750-2CH LTE, DR900X, DR750X, DR900S, DR750S, DR650S series, DR430-2CH, DR470-2CH, use the Coaxial Video Cable.Model name: AC-15
Jack Type: Phone TRRS(Right Angle) to Phone TRRS(Straight)
Length: 15 m / 49.21ft
Weight: 0.4850 lb / 220 g
Power Magic Battery Pack for Parking Mode 1-hour charge/12-hour operation Capacity 3000mA/12.8V Input 12V-24V Cigarette Lighter Output 12V/1A, 2 USB
Quick and Easy Installation: No hardwiring needed. Simply plugs into your vehicle's accessory (cigarette lighter) power socket.
Hassle-free Operation: Recharges while driving. Powers your dashcam while parked. 1 hour charge / 12 hours powered*.
*Based on power consumption of single-channel dashcam.*
Charge Any USB Accessory: 1 female accessory (Cigarette Lighter) power socket for your dashcam and 2 USB (5V) ports to power a phone, mobile hotspot, etc.
12V and 24V Compatibility: Supports most vehicles' electrical systems (cars and trucks or commercial heavy vehicles)
The Lite Air Mask is a reusable air mask that protects against air pollution, smog, pollen, allergens, and bacteria*. Made with a lightweight 3D air mesh material and elastic earloops, the Lite Air Mask provides a great balance between solid protection, lightweight comfort, and a timeless design for everyday use.
Product Description
ADVANCED PROTECTION, LIGHTWEIGHT COMFORT
The key to a comfortable, protective air filter mask lies in the small details that make up the entire mask. The Lite Air Mask is built on three foundations: protection, comfort, and design.
5-LAYER FILTER TECHNOLOGY
Our multi-layer filter technology is tested at the RISE R&D center in Sweden showing a 98% protection rate against particles down to the size of 0.3μm and 99.99% against pm2.5 pollution.
FOUR ADJUSTABLE SIZES
Protection for all ages. The Lite Air Mask comes in four sizes to fit children, teenagers and adults.
COMFORT AND PROTECTION
3D memory nose-foam and a shapeable nose clip ensure minimal air leakage
ERGONOMIC SHAPE
Designed to suit all face shapes. Adjustable functions ensure a fit that feels entirely custom.
UV PROTECTION
Protect your lungs and your skin. The Lite Air Mask has a UPF rating of 50, the maximum sun protective rating achievable for fabrics.
ELASTIC EARLOOPS
Take control of your comfort. With the adjustable earloops you can create a snug sealing and a personalized fit around the face.
DETACHABLE AND ADJUSTABLE HEAD-CLIP
Detachable head-clip to allow for less pressure on your ears
LIGHT, AIRY MATERIAL
Airy 3D mesh material for a cool feel and easy breathing
WASHABLE AND ANTI-BACTERIAL MASK-SKIN
Treated with Polygiene®, a treatment that reduces microbes (virus, bacteria and fungi) in two hours.
LONG LASTING AND REPLACEABLE FILTERS
Tested together with Research Institute of Sweden.
Protection
Virus
99,9% protection against viruses
Bacteria
99,9% protection against bacteria
Car emissions
Filters out PM2.5 and PM10
UV
UPF 50+ sun & ultraviolet protection
Smog
Filters down to 0.3 μm particle size
Wildfires
Filters down to 0.3 μm particle size
Dust
Fitlers down to 1-100 μm particle size
Odor
Removes gaseous substances
Mold
Filters down to 3-40 μm particle size
Tobacco smoke
Filters down to 0.01-1 μm particle size
Product details
Material
Airy 3D mesh material for a cool feel and easy breathing
Ear loops
Elastic earloops
Replaceable filters
Long lasting & replaceable filters
5-layer filter tech
Advanced 5-layer filter technology, tested for various international standards*
3D Nose Foam
3D memory nose-foam & shapeable nose-clip for minimal air leakage
Shape
Ergonomic shape to fit all face types
Washable skin
Washable and anti-bacterial mask-skin, treated with Polygiene®
Design
Sustainable swedish design
Size Guide
HOW DO I CHOOSE THE CORRECT SIZE FOR LITE AIR MASK?
To find the correct size, we recommend you to combine the two measurements below; the Weight Measurement and the Eye-Chin Distance Measurement.
WEIGHT MEASUREMENT
The weight measurement is strongly correlated with the length and size of the face, making it a great measurement for mask sizing.
Instructions:
1. Use a weight scale to find your weight
2. Compare your weight to the table below to find your size
Recommended Size
Weight (KG)
Weight (LB)
XS
12-25 kg
26-55 lb
S
25-45 kg
55-100 lb
M
45-70 kg
100-155 lb
L
Over 70 kg
Over 155 lb
EYE-CHIN DISTANCE MEASUREMENT
The eye-chin distance measurement is a very accurate method for getting the correct mask size.
Instructions:
1. Use a ruler and measure the vertical distance between your lower eyelid and your chin
2. It can be helpful to do this in front of a mirror or with the help of a friend.
3. Compare your measurement to the table below.
Recommended Size
Eye-Chin Distance (cm)
Eye-Chin Distance (inches)
XS
Less than 8.1 cm
Less than 3.1 IN
S
8.2-10.1 cm
3.2-3.9 IN
M
10.2-11.3 cm
4.0-4.4 IN
L
Over 11.4 cm
Over 4.5 IN
If you get different recommendations from the 2 methods, follow the one from the Eye-Chin Distance measurement. If your weight or eye-chin distance is on the borderline, pick the bigger one to ensure a better fit.
In The Box
What's in the box?
Lite Air Mask Skin
2 replaceable Lite Air Filters
1 detachable Lite Head Clip
This VND + diffusion filter combo for the DJI Mavic 3 and Mavic 3 Cine features a 2-5 stop range and 1/4 diffusion strength. Meticulously reduce your shutter speed by utilizing the laser-etched stop indicators on each filter.
Product Description
This VND + diffusion filter combo for the DJI Mavic 3 and Mavic 3 Cine features a 2-5 stop range and 1/4 diffusion strength. Meticulously reduce your shutter speed by utilizing the laser-etched stop indicators on each filter. The aerospace aluminum frame ensures each filter is gimbal optimized. Like all of our gear, this filter kit is backed by Adventure Assurance™, giving you confidence these filters will withstand the harshest shooting environments.
● Precisely engineered for the DJI Mavic 3 & Mavic 3 Cine.
● 2-5 stops of variable light reduction + ¼ diffusion.
● Includes VND 2-5 Mist filter + hard case.
● Lightweight aluminum frame design.
● CinemaSeries™ Glass - Featuring a low refractive index, color neutrality, and perfect target transmission. Made in Germany.
In The Box
VND 2-5 Mist × 1Hard case × 1
This VND + streak filter combo for the DJI Mavic 3 and Mavic 3 Cine features a 2-5 stop range and "morphic" gold light streak effects without the need for "de-squeezing" footage in post.
Product Description
This VND + streak filter combo for the DJI Mavic 3 and Mavic 3 Cine features a 2-5 stop range and "morphic" gold light streak effects without the need for "de-squeezing" footage in post (needed when using an anamorphic lens). Meticulously reduce your shutter speed by utilizing the laser-etched stop indicators on each filter. The aerospace aluminum frame ensures each filter is gimbal optimized. Like all of our gear, this filter kit is backed by Adventure Assurance™, giving you confidence these filters will withstand the harshest shooting environments.
● Precisely engineered for the DJI Mavic 3 & Mavic 3 Cine.
● Includes VND 2-5 GoldMorphic filter + hard case.
● Lightweight aluminum frame design.
● CinemaSeries™ Glass - Featuring a low refractive index, color neutrality, and perfect target transmission. Made in Germany.
In The Box
VND 2-5 GoldMorphic filter × 1Hard case × 1
This VND + streak filter combo for the DJI Mavic 3 and Mavic 3 Cine features a 2-5 stop range and "morphic" blue light streak effects without the need for "de-squeezing" footage in post.
Product Description
This VND + streak filter combo for the DJI Mavic 3 and Mavic 3 Cine features a 2-5 stop range and "morphic" blue light streak effects without the need for "de-squeezing" footage in post (needed when using an anamorphic lens). Meticulously reduce your shutter speed by utilizing the laser-etched stop indicators on each filter. The aerospace aluminum frame ensures each filter is gimbal optimized. Like all of our gear, this filter kit is backed by Adventure Assurance™, giving you confidence these filters will withstand the harshest shooting environments.
● Precisely engineered for the DJI Mavic 3 & Mavic 3 Cine.
● Includes VND 2-5 BlueMorphic filter + hard case.
● Lightweight aluminum frame design.
● CinemaSeries™ Glass - Featuring a low refractive index, color neutrality, and perfect target transmission. Made in Germany.
In The Box
VND 2-5 BlueMorphic filter × 1Hard case × 1
This VND set for the DJI Mavic 3 and Mavic 3 Cine features both a 2-5 & 6-9 stop variation, giving you precise light control in the majority of lighting conditions.
Availability: Pre Order - ETA Early February
Product Description
This VND set for the DJI Mavic 3 and Mavic 3 Cine features both a 2-5 & 6-9 stop variation, giving you precise light control in the majority of lighting conditions. Meticulously reduce your shutter speed by utilizing the laser-etched stop indicators on each filter. The aerospace aluminum frame ensures each filter is gimbal optimized. Like all of our gear, this filter kit is backed by Adventure Assurance™, giving you confidence these filters will withstand the harshest shooting environments.
● Precisely engineered for the DJI Mavic 3 & Mavic 3 Cine.
● Includes VND 2-5 and VND 6-9 filters + hard case.
● Lightweight aluminum frame design.
● CinemaSeries™ Glass - Featuring a low refractive index, color neutrality, and perfect target transmission. Made in Germany.
In The Box
IN THE BOX
VND2-5 × 1VND6-9 × 1Hard case × 1
This Circular Polarizer filter for the DJI Mavic 3 and Mavic 3 Cine helps cut reflections and glare while increasing contrast and saturation without any color shift. The aerospace aluminum frame ensures each filter is gimbal optimized.
Product Description
This Circular Polariser filter for the DJI Mavic 3 and Mavic 3 Cine helps cut reflections and glare while increasing contrast and saturation without any color shift. The aerospace aluminum frame ensures each filter is gimbal optimized. Like all of our gear, this filter kit is backed by Adventure Assurance™, giving you confidence these filters will withstand the harshest shooting environments.
● Precisely engineered for the DJI Mavic 3 & Mavic 3 Cine.
● Includes CP filter + hard case.
● Lightweight aluminum frame design.
● CinemaSeries™ Glass - Featuring a low refractive index, color neutrality, and perfect target transmission. Made in Germany.
In The Box
CP × 1Hard case × 1
The ultimate cinematography set for the DJI Mavic 3 and Mavic 3 Cine. The aerospace aluminum frame ensures each filter is gimbal optimized.
Product Description
The ultimate cinematography set for the DJI Mavic 3 and Mavic 3 Cine. The aerospace aluminum frame ensures each filter is gimbal optimized. Like all of our gear, this filter kit is backed by Adventure Assurance™, giving you confidence these filters will withstand the harshest shooting environments.
● Precisely engineered for the DJI Mavic 3 & Mavic 3 Cine.
● Includes VND2-5, VND6-9, Mist [1/4], BlueMorphic, GoldMorphic, CP, ND8/PL, ND16/PL, ND32/PL filters + hard case.
● Lightweight aluminum frame design.
● CinemaSeries™ Glass - Featuring a low refractive index, color neutrality, and perfect target transmission. Made in Germany.
In The Box
VND2-5 × 1 VND6-9 × 1 Mist [1/4]× 1 BlueMorphic × 1 GoldMorphic × 1 CP × 1 ND8/PL × 1 ND16/PL × 1 ND32/PL × 1 Hard case × 1
The FX 3-Pack for the Mavic 3 & Mavic 3 Cine includes three specialty effects filters to help you get creative in-camera. Featuring our blue and gold streak filters + 1/4 diffusion filter.
Product Description
The FX 3-Pack for the Mavic 3 & Mavic 3 Cine includes three specialty effects filters to help you get creative in-camera. Featuring our blue and gold streak filters + 1/4 diffusion filter, this set is for those looking to create a one-of-a-kind look from the skies. The aerospace aluminum frame ensures each filter is gimbal optimized. Like all of our gear, this filter kit is backed by Adventure Assurance™, giving you confidence these filters will withstand the harshest shooting environments.
● Precisely engineered for the DJI Mavic 3 & Mavic 3 Cine.
● Includes BlueMorphic, GoldMorphic, Mist [1/4] filters + hard case.
● Lightweight aluminum frame design.
● CinemaSeries™ Glass - Featuring a low refractive index, color neutrality, and perfect target transmission. Made in Germany.
In The Box
IN THE BOX
Mist [1/4]× 1BlueMorphic × 1GoldMorphic × 1Hard case × 1
The Vivid Collection for the Mavic 3 & Mavic 3 Cine combines two filter effects (ND + Polarization) together into one single glass element. Included in the set are ND8/PL, ND16/PL, ND32/PL filters.
Product Description
The Vivid Collection for the Mavic 3 & Mavic 3 Cine combines two filter effects (ND + Polarization) together into one single glass element. Included in the set are ND8/PL, ND16/PL, ND32/PL filters to reduce shutter speed and cut glare in bright and reflective conditions to produce stunningly saturated colors. To preserve max flight time and ensure gimbal optimization each filter features a lightweight aerospace aluminum frame. With polarization indicators etched onto the frame, these filters provide pinpoint adjustments to achieve your desired light polarization.
● Precisely engineered for the DJI Mavic 3 & Mavic 3 Cine.
● Includes ND8/PL, ND16/PL, ND32/PL filters + hard case.
● Lightweight aluminum frame design.
● CinemaSeries™ Glass - Featuring a low refractive index, color neutrality, and perfect target transmission. Made in Germany.
In The Box
ND8/PL × 1ND16/PL × 1ND32/PL × 1Hard case × 1