All products


  • DJI Matrice 30 - Actiontech DJI Matrice 30 - Actiontech

    DJI Matrice 30 (2 x Battery and Charging Station)

    The M30 is a lightweight & portable all in one drone that comes with a 12MP Wide Camera, 48MP Zoom Camera and a Laser Rangefinder. Product Description The DJI Matrice 30 is an all new all in one solution that combines all of DJI's latest transformational technologies into one portable, lightweight drone that is capable of next level flights. The M30 drone has new integrated high performance sensors with a wide, zoom camera along with an laser range finder.      41 Minute maximum flight time. 15 m/s maximum wind resistance & 23 m/s maximum speed. AI Intelligence for easier operations including smart pin and track & Waypoints 2.0 7000m service ceiling to allow for high altitude operations IP55 ingress protection.    ENVIRONMENTAL ADAPTABILITY With IP55 protection, the M30 can easily handle adverse weather and temperatures ranging from -20° C~50° C.   SAFE & RELIABLE.  The DJI M30 has dual-vision and ToF sensors on all six sides of the aircraft, keeping it and your mission safe. There is also a built in ADS-B receiver that provides timely warnings of any incoming aircraft.      ENHANCED TRANSMISSION Four built-in antennas support OcuSync 3 Enterprise, which enables triple-channel 1080p video transmission, and seamless swapping between input feeds, even in complex environments.Bolster your connection with DJI Cellular Module, an optional 4G dongle4 that supports stable video transmission in complex, or remote work environments.    CAPTURE EVERYTHING  The M30 Series integrates wide, zoom, and thermal cameras (M30T only) with a laser rangefinder, which together can capture the aerial data you need, when you need it.     PRO FLIGHT  The 7-inch widescreen DJI RC Plus with dual control mode is tailor-made for Enterprise users.   DJI PILOT 2  Drone and payload controls can be easily accessed with one tap. Clear presentation of flight details and navigational information improves user experience and flight efficiency. Pilot 2 works seamlessly with the DJI RC Plus. Screenside and customizable buttons are all within reach and enable quick operations, such as adjusting camera views and dropping PinPoints.   GROUND TO CLOUD FlightHub 2 offers a 2.5D Base Map for quick terrain awareness, One-Tap Panorama Sync for rapid site overviews, and Cloud Mapping for fast mapping in RGB or infrared.     ADVANCED INTELLIGENCE Flight routes and missions planned in FlightHub 2 can be easily synchronized with Pilot 2. Operation data can be automatically uploaded to FlightHub 2 Media Files for unified management and analysis.   DJI DOCK (SOLD SEPARATELY)  The DJI Dock (M30 Series Dock Version7) has flagship-level performance with a maximum operation range of 7 km8, IP55 weather resistance, and resilience in temperatures ranging from -35℃ to 50℃.   Product Specifications PRODUCT SPECIFICATIONS AIRCRAFT Dimensions (unfolded, excl. propellers): 470×585×215 mm (L×W×H) Dimensions (folded): 365×215×195 mm (L×W×H) Diagonal Wheelbase: 668 mm Weight (incl. two batteries): 3770 ± 10 g Max Takeoff Weight: 4000 g Operation Frequency[1]: 2.4000-2.4835 GHz; 5.725-5.850 GHz Transmitter Power (EIRP): 2.4 GHz: <33 dBm (FCC); <20 dBm (CE/SRRC/MIC) 5.8 GHz: <33 dBm (FCC/SRRC); <14 dBm (CE) Hovering Accuracy (windless or breezy): Vertical: ±0.1 m (Vision System enabled); ±0.5 m (N-mode with GPS); ±0.1 m (RTK) Horizontal: ±0.3 m (Vision System enabled); ±1.5 m (N-mode with GPS); ±0.1 m (RTK) RTK Positioning Accuracy (fixed RTK enabled): 1 cm+1 ppm (horizontal) 1.5 cm+1 ppm (vertical) Max Angular Velocity: Pitch: 150°/sec.; Yaw: 100°/sec. Max Tilt Angle: 35° (N-mode and Forward Vision System enabled: 25°) Max Ascent/Descent Speed: 6 m/s, 5 m/s Max Tilt Descent Speed: 7 m/s Max Horizontal Speed: 23 m/s Max Service Ceiling Above Sea Level (without other payload): 5,000 m (with 1671 propellers) 7,000 m (with 1676 propellers) Max Wind Resistance: 15 m/s, 12 m/s during taking off and landing Max Hover Time [2]: 36 min Max Flight Time[2]: 41 min Motor Model: 3511 Propeller Model: 1671, 1676 High Altitude (not included) Ingress Protection Rating[3]: IP55 GNSS: GPS+Galileo+BeiDou+GLONASS(GLONASS is supported only when RTK module is enabled) Operating Temperature: -20° to 50° C (-4° to 122° F)   GIMBAL Angular Vibration Range: ±0.01° Controllable Range: Pan: ±90°Tilt: -120° to +45° Mechanical Range: Pan: ±105°Tilt: -135° to +60°Roll: ±45°   ZOOM CAMERA Sensor: 1/2" CMOS, Effective pixels: 48M Lens: Focal length: 21-75 mm (equivalent: 113-405 mm)Aperture: f/2.8-f/4.2Focus: 5 m to ∞   WIDE CAMERA Sensor: 1/2" CMOS, Effective pixels: 12M Lens: DFOV: 84°Focal length: 4.5 mm (equivalent: 24 mm)Aperture: f/2.8Focus: 1 m to ∞   THERMAL CAMERA (ONLY AVAILABLE ON MATRICE 30T) Thermal Imager: Uncooled VOx Microbolometer Lens: DFOV: 64°Focal length: 9.1 mm (equivalent: 40 mm)Aperture: f/1.0Focus: 5 m to ∞ Infrared Temperature Measurement Accuracy[4]: ±2°C or ±2% (using the larger value)   FPV CAMERA Resolution: 1920×1080 DFOV: 161° Frame Rate: 30 fps   LASER MODULE Wavelength: 905 nm Max Laser Power: 3.5 mW Single Pulse Width: 6 ns Measurement Accuracy: ± (0.2 m + D×0.15%)D is the distance to a vertical surface Measuring Range: 3-1,200 m (0.5×12 m vertical surface with 20% reflectivity)   VISION SYSTEMS Obstacle Sensing Range: Forward: 0.6-38 mUpward/Downward/Backward/Sideward: 0.5-33 m FOV: 65° (H), 50° (V) Operating Environment: Surfaces with clear patterns and adequate lighting (> 15 lux)   INFARED SENSING SYSTEMS Obstacle Sensing Range: 0.1 to 10 m FOV: 30° Operating Environment: Large, diffuse, and reflective obstacles (reflectivity >10%)   TB30 INTELLIGENT FLIGHT BATTERY Capacity: 5880 mAh Voltage: 26.1 V Battery Type: LiPo 6S Energy: 131.6 Wh Net Weight: Approx. 685 g Operating Temperature: -20° to 50° C (-4° to 122° F) Storage Temperature: 20° to 30° C (68° to 86° F) Charging Temperature: -20° to 40° C (-4° to 104° F)(When the temperature is lower than 10° C (50° F), the self-heating function will be automatically enabled. Charging in a low temperature may shorten the lifetime of the battery) Chemical System: LiNiMnCoO2   AUXILIARY LIGHTS Effective Illumination Distance: 5 m Illumination Type: 60 Hz, solid glow   REMOTE CONTROLLER Screen: 7.02 inch LCD touchscreen, with a resolution of 1920×1200 pixels, and high brightness of 1200 cd/m2 Internal Battery: Type: Li-ion (6500 mAh @ 7.2 V)Charge Type: Supports battery station or USB-C charger maximum rated power 65W (max voltage of 20V)Charge Time: 2 hoursChemical System: LiNiCoAIO2 External Battery(WB37 Intelligent Battery): Capacity: 4920 mAhVoltage: 7.6 VBattery Type: Li-ionEnergy: 37.39 WhChemical System: LiCoO2 Operating Time[5]: Internal Battery: Approx. 3 hours 18 minInternal Battery + External Battery: Approx. 6 hours Ingress Protection Rating[3]: IP54 GNSS: GPS+Galileo+BeiDou Operating Temperature: -20° to 50° C (-4° to 122° F)   O3 ENTERPRISE Operating Frequency[1]: 2.4000-2.4835 GHz, 5.725-5.850 GHz Max Transmission Distance (unobstructed, free of interference): 2.4000-2.4835 GHz: 15 km (FCC); 8 km (CE/SRRC/MIC) Max Transmission Distance (with interference): Strong Interference (urban landscape, limited line of sight, many competing signals): 1.5-3 km (FCC/CE/SRRC/MIC)Medium Interference (suburban landscape, open line of sight, some competing signals): 3-9 km (FCC); 3-6 km (CE/SRRC/ MIC)Weak Interference (open landscape abundant line of sight, few competing signals): 9-15 km (FCC); 6-8 km (CE/ SRRC/MIC) Transmitter Power (EIRP): 2.4 GHz: <33 dBm (FCC); <20 dBm (CE/ SRRC/MIC)5.8 GHz: <33 dBm (FCC); <14 dBm (CE); <23 dBm (SRRC)   WI-FI Protocol: Wi-Fi 6 Operating Frequency[1]: 2.4000-2.4835 GHz; 5.150-5.250 GHz; 5.725-5.850 GHz Transmitter Power (EIRP): 2.4 GHz: <26 dBm (FCC); <20 dBm (CE/ SRRC/MIC)5.1 GHz: <26 dBm (FCC); <23 dBm (CE/ SRRC/MIC)5.8 GHz: <26 dBm (FCC/SRRC); <14 dBm(CE)   BLUETOOTH Protocol: Bluetooth 5.1 Operating Frequency: 2.4000-2.4835 GHz Transmitter Power (EIRP): <10 dBm   BS30 Intelligent Battery Station Dimensions: 353×267×148 mm Net Weight: 3.95 kg Compatible Battery Type: TB30 Intelligent Flight Battery, WB37 Intelligent Battery Input: 100-240 VAC, 50/60 Hz Output: TB30 Battery Port: 26.1 V, 8.9 A (supported up to two outputs simultaneously)WB37 Intelligent Battery: 8.7 V, 6 A Output Power: 525 W USB-C port: Max. output power of 65 W USB-A port: Max. output power of 10 W (5 V, 2 A) Power Consumption (when not charging battery): < 8 W Output Power (when warming up battery): Approx. 30 W Operating Temperature: -20° to 40° C (-4° to 104° F) Ingress Protection Rating[3]: IP55 (with the cover closed properly) Charging Time[6]: Approx. 30 min (charging two TB30 batteries from 20%-90%)Approx. 50 min (charging two TB30 batteries from 0%-100%) Protection Features: Anti-Backflow ProtectionShort Circuit ProtectionOver Voltage ProtectionOver Current ProtectionTemperature Protection   OTHER Footnotes: [1] 5.8 and 5.1GHz frequencies are prohibited in some countries. In some countries, the 5.1GHz frequency is only allowed for use indoors.[2] The maximum flight time and the hover time were tested in a lab environment and is for reference only.[3] This protection rating is not permanent and may reduce over time after long-term use.[4] Infrared temperature measurement accuracy was tested in a lab environment and is for reference only.[5] The maximum operating time was tested in a lab environment and is for reference only.[6] The charging time was tested in a lab environment at room temperature. The value provided should be used for reference only.   In The Box IN THE BOX Aircraft Body x 1DJI RC Plus Remote Controller x 11671 Propeller (CW) x 21671 Propeller (CCW) x 2USB-C Cable x 1USB-C to USB-C Cable x 1Carrying Case x 1Screws and Tools x 1BS30 Battery Station x 1TB30 Battery x 2  

    $11,044.00

  • BLACKVUE EXTERNAL GPS MODULE FOR BLACKVUE DR590X - Actiontech

    Blackvue External GPS Module For Blackvue DR590X

    8 in stock

    The External GPS Receiver adds speed and location data to your videos. Speed: speed dataÐin Km/h or MphÐwill be overlaid in the video (can be turned off in the dashcamÕs settings). Location: you can visualize the location of your vehicle in the BlackVue ViewerÕs Map during video playback.

    8 in stock

    $49.95

  • BLACKVUE MICROSD CARD 128GB OPTIMIZED FOR BLACKVUE DASHCAMS - Actiontech

    Blackvue Microsd Card 128GB Optimised For Blackvue Dashcams

    Out of stock

    The BlackVue microSD cards are optimized to work with all BlackVue dashcams. The 128GB is compatible with all of the following dashcams: DR900S - 1CH / 2H / 2CH IR DR900X - 1CH / 2H / 2CH IR DR750S - 1CH / 2CH / 2CH IR DR750X - 1CH / 2CH / 2CH IR DR750X TRUCK - 1CH / 2CH / 2CH IR DR590W - 1CH / 2CH / 2CH IR DR590X - 1CH / 2CH / 2CH IR DR590 - 1CH / 2CH / 2CH IR Please note regarding compatibility with older BlackVue dashcam models: although it may seem to work, we cannot fully guarantee compatibility and performance with older models.

    Out of stock

    $139.95

  • Last stock! BLACKVUE COAXIAL VIDEO CABLE FOR DUAL-CHANNEL DASHCAMS 1.5M - Actiontech

    Blackvue Coaxial Video Cable For Dual-Channel Dashcams 1.5M

    2 in stock

    Coaxial video cables for dual-channel BlackVue dashcams.Compatible with DR750-2CH LTE, DR900X Series, DR750X Series, DR900S Series, DR750S Series, DR650S Series, DR430-2CH, DR470-2CH.Note: Incompatible with DR590/DR590W series, DR490-2CH, DR490L-2CH Weight: 0.3kg Dimensions: 21cm x 15cm x 7cm Length: 1.5m

    2 in stock

    $29.95

  • BLACKVUE TAMPER-PROOF CASE FOR TRUCK, BUSES - Actiontech

    Blackvue Tamper-Proof Case For Truck, Buses

    10 in stock

    The Blackvue Tamper-Proof Cases are designed to prevent access to critical components of the dashcam. All models block access to the microSD card slot and the power and video cable connectors on the front camera. The Tamper-Proof Cases for X Series models also allow to lock the angle of the front camera. BTC-2B: ¥ Vertical windshield type, suitable for trucks, buses, vans, etc ¥ Windshield angle of 60¡Ð90¡ with the horizontal. Compatible Models: ¥ DR900S-1CH AND DR900S-2CH ¥ DR750S-1CH AND DR750S-2CH ¥ DR650S-1CH AND DR650S-2CH AND DR650S-2CH IR AND DR650S-2CH TRUCK ¥ DR650GW-1CH AND DR650GW-2CH AND DR650GW-2CH TRUCK ¥ DR550GW-1CH AND DR550GW-2CH.

    10 in stock

    $59.95

  • BLACKVUE ANALOG VIDEO CABLE FOR DUAL CHANNEL DASHCAMS 15M - Actiontech

    Blackvue Analog Video Cable For Dual Channel Dashcams 15M

    3 in stock

    Analog video cables for dual-channel BlackVue dashcams.Compatible with DR590X-2CH, DR590X-2CH IR, DR590W-2CH, DR590W-2CH IR, DR590-2CH, DR590-2CH IR, DR490-2CH, DR490L-2CH.Note: For DR750-2CH LTE, DR900X, DR750X, DR900S, DR750S, DR650S series, DR430-2CH, DR470-2CH, use the Coaxial Video Cable.Model name: AC-15 Jack Type: Phone TRRS(Right Angle) to Phone TRRS(Straight) Length: 15 m / 49.21ft Weight: 0.4850 lb / 220 g

    3 in stock

    $49.95

  • BLACKVUE B-112 POWER MAGIC BATTERY PACK - Actiontech

    Blackvue B-112 Power Magic Battery Pack

    10 in stock

    Power Magic Battery Pack for Parking Mode 1-hour charge/12-hour operation Capacity 3000mA/12.8V Input 12V-24V Cigarette Lighter Output 12V/1A, 2 USB Quick and Easy Installation: No hardwiring needed. Simply plugs into your vehicle's accessory (cigarette lighter) power socket. Hassle-free Operation: Recharges while driving. Powers your dashcam while parked. 1 hour charge / 12 hours powered*. *Based on power consumption of single-channel dashcam.* Charge Any USB Accessory: 1 female accessory (Cigarette Lighter) power socket for your dashcam and 2 USB (5V) ports to power a phone, mobile hotspot, etc. 12V and 24V Compatibility: Supports most vehicles' electrical systems (cars and trucks or commercial heavy vehicles)

    10 in stock

    $329.95

  • Fiido Q1S - Seated Electric Scooter - Red - Actiontech Fiido Q1S - Seated Electric Scooter - Red - Actiontech

    Fiido Q1S - Seated Electric Scooter - Red

    Out of stock

    Versatile and portable, a new fun way to explore. Small enough to take on public transport or put in the boot of your car for those last mile journeys.  Great for students to whiz around campus or to get across large facilities. Perfect for a short trip to the shops with the included basket attachments to carry your groceries, laptop or a box of ice-cold refreshments!  Product Description AT A GLANCE: Scooter Type - What is the best use case for it? Boot/Last Mile - Commuter - All Rounder - Speedster - Beast Boot/Last Mile Range - How far can it go? 30 km Speed - How fast can it go? 25 km/h Motors - How Many and What Power? 1 x 250w Scooter Weight - How much does it weigh? 20 kg Max Load - How much can it carry? 150 kg IP Rating - Does it have a verified water resistance rating? IP34 INCLUDED FREE: OVER $150 VALUE  Centre Satchel Bag - fits in between the dual frame Front basket - attached to front handle bars FIIDO SEATED E SCOOTER Versatile and portable, a new fun way to explore. Small enough to take on public transport or put in the boot of your car for those last mile journeys.  Great for students to whiz around campus or to get across large facilities. Perfect for a short trip to the shops with the included basket attachments to carry your groceries, laptop or a box of ice-cold refreshments!   Product Specifications Specs Fiido Q1S Top Speed 25 kmh Range 32 km Battery Charge Time 4-5 hrs Motor Power 250w Geared Motor Brakes Front & Rear Cable Disc Suspension Front Spring, Rear Air Shock Scooter Weight 20 kg Max Rider Weight 150 kg Water Resistance IP34 Security Built in alarm & Keyless Ignition Unfolded Size 120 x 62 x 110cm (LxWxH) Folded Size 114 x 31 x 70cm (LxWxH) Extras Cargo storage in center of frame and front basket, LED display with battery meter, front LED lights, cruise control, key-fob remote alarm and unlocking, fenders, footpegs, electronic horn  

    Out of stock

    $1,899.00

  • Sale -38% Airinum Lite Air Mask - Wild Blue (Kids) - Actiontech Airinum Lite Air Mask - Wild Blue (Kids) - Actiontech

    Airinum Lite Air Mask - Wild Blue (Kids)

    7 in stock

    The Lite Air Mask is a reusable air mask that protects against air pollution, smog, pollen, allergens, and bacteria*. Made with a lightweight 3D air mesh material and elastic earloops, the Lite Air Mask provides a great balance between solid protection, lightweight comfort, and a timeless design for everyday use. Product Description ADVANCED PROTECTION, LIGHTWEIGHT COMFORT The key to a comfortable, protective air filter mask lies in the small details that make up the entire mask. The Lite Air Mask is built on three foundations: protection, comfort, and design. 5-LAYER FILTER TECHNOLOGY Our multi-layer filter technology is tested at the RISE R&D center in Sweden showing a 98% protection rate against particles down to the size of 0.3μm and 99.99% against pm2.5 pollution. FOUR ADJUSTABLE SIZES Protection for all ages. The Lite Air Mask comes in four sizes to fit children, teenagers and adults. COMFORT AND PROTECTION 3D memory nose-foam and a shapeable nose clip ensure minimal air leakage ERGONOMIC SHAPE Designed to suit all face shapes. Adjustable functions ensure a fit that feels entirely custom. UV PROTECTION Protect your lungs and your skin. The Lite Air Mask has a UPF rating of 50, the maximum sun protective rating achievable for fabrics. ELASTIC EARLOOPS Take control of your comfort. With the adjustable earloops you can create a snug sealing and a personalized fit around the face. DETACHABLE AND ADJUSTABLE HEAD-CLIP Detachable head-clip to allow for less pressure on your ears LIGHT, AIRY MATERIAL Airy 3D mesh material for a cool feel and easy breathing WASHABLE AND ANTI-BACTERIAL MASK-SKIN Treated with Polygiene®, a treatment that reduces microbes (virus, bacteria and fungi) in two hours. LONG LASTING AND REPLACEABLE FILTERS Tested together with Research Institute of Sweden. Protection Virus 99,9% protection against viruses Bacteria 99,9% protection against bacteria  Car emissions Filters out PM2.5 and PM10 UV UPF 50+ sun & ultraviolet protection Smog Filters down to 0.3 μm particle size Wildfires Filters down to 0.3 μm particle size Dust Fitlers down to 1-100 μm particle size Odor Removes gaseous substances Mold Filters down to 3-40 μm particle size Tobacco smoke Filters down to 0.01-1 μm particle size Product details Material Airy 3D mesh material for a cool feel and easy breathing Ear loops Elastic earloops Replaceable filters Long lasting & replaceable filters 5-layer filter tech Advanced 5-layer filter technology, tested for various international standards* 3D Nose Foam 3D memory nose-foam & shapeable nose-clip for minimal air leakage Shape Ergonomic shape to fit all face types Washable skin Washable and anti-bacterial mask-skin, treated with Polygiene® Design Sustainable swedish design   Size Guide HOW DO I CHOOSE THE CORRECT SIZE FOR LITE AIR MASK? To find the correct size, we recommend you to combine the two measurements below; the Weight Measurement and the Eye-Chin Distance Measurement. WEIGHT MEASUREMENT The weight measurement is strongly correlated with the length and size of the face, making it a great measurement for mask sizing.  Instructions: 1. Use a weight scale to find your weight 2. Compare your weight to the table below to find your size Recommended Size Weight (KG) Weight (LB) XS 12-25 kg 26-55 lb S 25-45 kg 55-100 lb M 45-70 kg 100-155 lb L Over 70 kg Over 155 lb EYE-CHIN DISTANCE MEASUREMENT The eye-chin distance measurement is a very accurate method for getting the correct mask size.  Instructions: 1. Use a ruler and measure the vertical distance between your lower eyelid and your chin 2. It can be helpful to do this in front of a mirror or with the help of a friend. 3. Compare your measurement to the table below.     Recommended Size Eye-Chin Distance (cm) Eye-Chin Distance (inches) XS Less than 8.1 cm Less than 3.1 IN S 8.2-10.1 cm 3.2-3.9 IN M 10.2-11.3 cm 4.0-4.4 IN L Over 11.4 cm Over 4.5 IN If you get different recommendations from the 2 methods, follow the one from the Eye-Chin Distance measurement. If your weight or eye-chin distance is on the borderline, pick the bigger one to ensure a better fit. In The Box What's in the box? Lite Air Mask Skin 2 replaceable Lite Air Filters 1 detachable Lite Head Clip

    7 in stock

    $79.00 $48.99

  • PolarPro Mavic 3 - VND 2-5 Mist - Actiontech PolarPro Mavic 3 - VND 2-5 Mist - Actiontech

    PolarPro Mavic 3 - VND 2-5 Mist

    Out of stock

    This VND + diffusion filter combo for the DJI Mavic 3 and Mavic 3 Cine features a 2-5 stop range and 1/4 diffusion strength. Meticulously reduce your shutter speed by utilizing the laser-etched stop indicators on each filter.   Product Description This VND + diffusion filter combo for the DJI Mavic 3 and Mavic 3 Cine features a 2-5 stop range and 1/4 diffusion strength. Meticulously reduce your shutter speed by utilizing the laser-etched stop indicators on each filter. The aerospace aluminum frame ensures each filter is gimbal optimized. Like all of our gear, this filter kit is backed by Adventure Assurance™, giving you confidence these filters will withstand the harshest shooting environments.   ● Precisely engineered for the DJI Mavic 3 & Mavic 3 Cine.  ● 2-5 stops of variable light reduction + ¼ diffusion.  ● Includes VND 2-5 Mist filter + hard case.  ● Lightweight aluminum frame design.  ● CinemaSeries™ Glass - Featuring a low refractive index, color neutrality, and perfect target transmission. Made in Germany.     In The Box VND 2-5 Mist × 1Hard case × 1  

    Out of stock

    $135.00

  • PolarPro Mavic 3 - VND 2-5 GoldMorphic - Actiontech PolarPro Mavic 3 - VND 2-5 GoldMorphic - Actiontech

    PolarPro Mavic 3 - VND 2-5 GoldMorphic

    Out of stock

    This VND + streak filter combo for the DJI Mavic 3 and Mavic 3 Cine features a 2-5 stop range and "morphic" gold light streak effects without the need for "de-squeezing" footage in post.   Product Description This VND + streak filter combo for the DJI Mavic 3 and Mavic 3 Cine features a 2-5 stop range and "morphic" gold light streak effects without the need for "de-squeezing" footage in post (needed when using an anamorphic lens). Meticulously reduce your shutter speed by utilizing the laser-etched stop indicators on each filter. The aerospace aluminum frame ensures each filter is gimbal optimized. Like all of our gear, this filter kit is backed by Adventure Assurance™, giving you confidence these filters will withstand the harshest shooting environments.   ● Precisely engineered for the DJI Mavic 3 & Mavic 3 Cine.  ● Includes VND 2-5 GoldMorphic filter + hard case.  ● Lightweight aluminum frame design.  ● CinemaSeries™ Glass - Featuring a low refractive index, color neutrality, and perfect target transmission. Made in Germany.   In The Box VND 2-5 GoldMorphic filter × 1Hard case × 1  

    Out of stock

    $135.00

  • PolarPro Mavic 3 - VND 2-5 BlueMorphic - Actiontech PolarPro Mavic 3 - VND 2-5 BlueMorphic - Actiontech

    PolarPro Mavic 3 - VND 2-5 BlueMorphic

    Out of stock

    This VND + streak filter combo for the DJI Mavic 3 and Mavic 3 Cine features a 2-5 stop range and "morphic" blue light streak effects without the need for "de-squeezing" footage in post.   Product Description This VND + streak filter combo for the DJI Mavic 3 and Mavic 3 Cine features a 2-5 stop range and "morphic" blue light streak effects without the need for "de-squeezing" footage in post (needed when using an anamorphic lens). Meticulously reduce your shutter speed by utilizing the laser-etched stop indicators on each filter. The aerospace aluminum frame ensures each filter is gimbal optimized. Like all of our gear, this filter kit is backed by Adventure Assurance™, giving you confidence these filters will withstand the harshest shooting environments.   ● Precisely engineered for the DJI Mavic 3 & Mavic 3 Cine.  ● Includes VND 2-5 BlueMorphic filter + hard case.  ● Lightweight aluminum frame design.  ● CinemaSeries™ Glass - Featuring a low refractive index, color neutrality, and perfect target transmission. Made in Germany.   In The Box VND 2-5 BlueMorphic filter × 1Hard case × 1  

    Out of stock

    $135.00

  • PolarPro Mavic 3 - VND 2-Pack - Actiontech PolarPro Mavic 3 - VND 2-Pack - Actiontech

    PolarPro Mavic 3 - VND 2-Pack

    Out of stock

    This VND set for the DJI Mavic 3 and Mavic 3 Cine features both a 2-5 & 6-9 stop variation, giving you precise light control in the majority of lighting conditions.   Availability: Pre Order - ETA Early February Product Description This VND set for the DJI Mavic 3 and Mavic 3 Cine features both a 2-5 & 6-9 stop variation, giving you precise light control in the majority of lighting conditions. Meticulously reduce your shutter speed by utilizing the laser-etched stop indicators on each filter. The aerospace aluminum frame ensures each filter is gimbal optimized. Like all of our gear, this filter kit is backed by Adventure Assurance™, giving you confidence these filters will withstand the harshest shooting environments.    ● Precisely engineered for the DJI Mavic 3 & Mavic 3 Cine.  ● Includes VND 2-5 and VND 6-9 filters + hard case.  ● Lightweight aluminum frame design.  ● CinemaSeries™ Glass - Featuring a low refractive index, color neutrality, and perfect target transmission. Made in Germany.     In The Box IN THE BOX VND2-5 × 1VND6-9 × 1Hard case × 1  

    Out of stock

    $219.00

  • PolarPro Mavic 3 - CP (Circular Polariser) - Actiontech PolarPro Mavic 3 - CP (Circular Polariser) - Actiontech

    PolarPro Mavic 3 - CP (Circular Polariser)

    Out of stock

    This Circular Polarizer filter for the DJI Mavic 3 and Mavic 3 Cine helps cut reflections and glare while increasing contrast and saturation without any color shift. The aerospace aluminum frame ensures each filter is gimbal optimized.   Product Description   This Circular Polariser filter for the DJI Mavic 3 and Mavic 3 Cine helps cut reflections and glare while increasing contrast and saturation without any color shift. The aerospace aluminum frame ensures each filter is gimbal optimized. Like all of our gear, this filter kit is backed by Adventure Assurance™, giving you confidence these filters will withstand the harshest shooting environments.   ● Precisely engineered for the DJI Mavic 3 & Mavic 3 Cine.  ● Includes CP filter + hard case.  ● Lightweight aluminum frame design.  ● CinemaSeries™ Glass - Featuring a low refractive index, color neutrality, and perfect target transmission. Made in Germany.       In The Box CP × 1Hard case × 1  

    Out of stock

    $135.00

  • PolarPro Mavic 3 - Directors Kit - Actiontech PolarPro Mavic 3 - Directors Kit - Actiontech

    PolarPro Mavic 3 - Directors Kit

    Out of stock

    The ultimate cinematography set for the DJI Mavic 3 and Mavic 3 Cine. The aerospace aluminum frame ensures each filter is gimbal optimized.   Product Description   The ultimate cinematography set for the DJI Mavic 3 and Mavic 3 Cine. The aerospace aluminum frame ensures each filter is gimbal optimized. Like all of our gear, this filter kit is backed by Adventure Assurance™, giving you confidence these filters will withstand the harshest shooting environments.    ● Precisely engineered for the DJI Mavic 3 & Mavic 3 Cine.  ● Includes VND2-5, VND6-9, Mist [1/4], BlueMorphic, GoldMorphic, CP, ND8/PL, ND16/PL, ND32/PL filters + hard case.  ● Lightweight aluminum frame design.  ● CinemaSeries™ Glass - Featuring a low refractive index, color neutrality, and perfect target transmission. Made in Germany.       In The Box VND2-5 × 1 VND6-9 × 1 Mist [1/4]× 1 BlueMorphic × 1 GoldMorphic × 1 CP × 1 ND8/PL × 1 ND16/PL × 1 ND32/PL × 1 Hard case × 1  

    Out of stock

    $669.00

  • PolarPro Mavic 3 - FX 3-Pack - Actiontech PolarPro Mavic 3 - FX 3-Pack - Actiontech

    PolarPro Mavic 3 - FX 3-Pack

    Out of stock

    The FX 3-Pack for the Mavic 3 & Mavic 3 Cine includes three specialty effects filters to help you get creative in-camera. Featuring our blue and gold streak filters + 1/4 diffusion filter.   Product Description   The FX 3-Pack for the Mavic 3 & Mavic 3 Cine includes three specialty effects filters to help you get creative in-camera. Featuring our blue and gold streak filters + 1/4 diffusion filter, this set is for those looking to create a one-of-a-kind look from the skies. The aerospace aluminum frame ensures each filter is gimbal optimized. Like all of our gear, this filter kit is backed by Adventure Assurance™, giving you confidence these filters will withstand the harshest shooting environments.   ● Precisely engineered for the DJI Mavic 3 & Mavic 3 Cine.  ● Includes BlueMorphic, GoldMorphic, Mist [1/4] filters + hard case.  ● Lightweight aluminum frame design.  ● CinemaSeries™ Glass - Featuring a low refractive index, color neutrality, and perfect target transmission. Made in Germany.     In The Box IN THE BOX Mist [1/4]× 1BlueMorphic × 1GoldMorphic × 1Hard case × 1  

    Out of stock

    $219.00

  • POLARPRO MAVIC 3 - VIVID COLLECTION - Actiontech POLARPRO MAVIC 3 - VIVID COLLECTION - Actiontech

    Polarpro Mavic 3 - Vivid Collection

    Out of stock

    The Vivid Collection for the Mavic 3 & Mavic 3 Cine combines two filter effects (ND + Polarization) together into one single glass element. Included in the set are ND8/PL, ND16/PL, ND32/PL filters.   Product Description The Vivid Collection for the Mavic 3 & Mavic 3 Cine combines two filter effects (ND + Polarization) together into one single glass element. Included in the set are ND8/PL, ND16/PL, ND32/PL filters to reduce shutter speed and cut glare in bright and reflective conditions to produce stunningly saturated colors. To preserve max flight time and ensure gimbal optimization each filter features a lightweight aerospace aluminum frame. With polarization indicators etched onto the frame, these filters provide pinpoint adjustments to achieve your desired light polarization.   ● Precisely engineered for the DJI Mavic 3 & Mavic 3 Cine.  ● Includes ND8/PL, ND16/PL, ND32/PL filters + hard case.  ● Lightweight aluminum frame design.  ● CinemaSeries™ Glass - Featuring a low refractive index, color neutrality, and perfect target transmission. Made in Germany.   In The Box ND8/PL × 1ND16/PL × 1ND32/PL × 1Hard case × 1  

    Out of stock

    $219.00

  • SYRP GENIE LINEAR ACCESSORY - Actiontech

    Syrp Genie Linear Accessory

    5 in stock

    Clicks into the base of Genie to shoot tracking movements on any slider with the Genie. Product Description Genie Linear Accessory clicks into the base of the Genie and enables linear motion by allowing the Genie to drive along the rope. This unique linear rope drive system enables the Genie to work with any slider on the market by simply tieing off the rope at either end of your slider.Originally provided in the box with the Genie this is available as an optional spare part to replace lost or damaged standard part.Note this part is not the same as the Slingshot Linear Accessory nor interchangeable. Specifications Weight: 0.257 kgDimensions: 9.5 x 9.5 x 3.3 cmCompatibility: Genie (first edition)Tripod Mounting: Female 3/8"-16 threadPayload Panning: 15 kg

    5 in stock

    $159.00

  • Last stock! SYRP GENIE PANNING ACCESSORY - Actiontech

    Syrp Genie Panning Accessory

    1 in stock

    Clicks into the base of Genie to shoot time-lapses with Panning motion Genie Panning Accessory clicks into the base of the Genie to create panning motion. Designed to attach to a tripod it has a standard 3/8''-16 and 1/4''-20 female tripod mount.Originally provided in the box with the Genie this is available as an optional spare part to replace a lost or damaged part. Product Description   Specifications Weight: 0.172 kgDimensions: 9.5 x 9.5 x 2.3 cmCompatibility: Genie (first edition)Tripod Mounting: Female 3/8"-16 threadPayload Panning: 15 kg

    1 in stock

    $129.00

  • Last stock! SYRP QUICK RELEASE 1/4''-20 CAMERA SCREW SQUARE - Actiontech

    Syrp Quick Release 1/4''-20 Camera Screw Square

    1 in stock

    Quick Release 1/4"-20 Camera Screw for mounting cameras, ballheads and video heads to the Syrp 90mm Quick Release Plate. This accessory slots into the centre of the 90mm Syrp Quick Release Plate with a simple pull tab. Used for easily and quickly attaching cameras, ballheads and video heads to all Syrp products that use the 90mm Quick Release Plate.This accessory is originally provided with 90mm Quick Release Plate which comes with Magic Carpet Pro and Genie II Linear and is available as an optional spare part to replace a lost or damaged standard part.

    1 in stock

    $25.95

  • SYRP MAGIC CARPET LONG THREAD ADAPTER - Actiontech

    Syrp Magic Carpet Long Thread Adapter

    3 in stock

    Magic Carpet Long Thread Adapter

    3 in stock

    $42.95

  • SYRP TILT PLATFORM - Actiontech

    Syrp Tilt Platform

    5 in stock

    The Tilt Platform is the perfect accessory for levelling your camera when you position your slider on an angle. Product Description It gives time-lapses photographers and filmmakers the ability to create unique vertical shots while keeping your camera perfectly level and can be used with manually operated sliders or with motion control. A must-have accessory for Genie II Linear and Magic Carpet slider users, the Tilt Platform can also be used with any other 3rd party slider on the market. This simple-to-use, tool-less accessory allows you to create unique angles by changing your camera position up to 180° tilt angle, offering the possibility to capture a variety of unique shots. The angle markings up to 90° enables accurate angle adjustment. Also included is a 3/8-16” – 1/4-20” UNC thread adapter installed in the base for more mounting options. The adjustable knob for modifying the tension of the lever ensures your camera stays secure at any angle up to a maximum payload of 6kg or 13.2lbs. Specifications: Payload: 6kg / 13.2 lbsWeight: 420g / 0.93lbsMounting: 3/8"-16 UNC Threads on top and bottom Compatibility: Can attach to Genie II Linear and Magic Carpet or any other slider on the market Dimensions: 125.00 x 93.00 x 36.00mm / 4.9 x 3.7 x 1.4 inch (LxWxH) In the box: 1x Tilt Platform1x 3/8-16 – 1/4-20 UNC thread adapter

    5 in stock

    $379.00

  • Last stock! SYRP GENIE MICRO - Actiontech

    Syrp Genie Micro

    2 in stock

    The Genie Micro is an all-in-one smart remote for mirrorless and DSLR cameras, allowing you to control your camera from our intuitive smartphone app. Product Description Simply slide into the hot shoe, connect your camera and pair with the app. Control ISO, Aperture and Shutter speed without touching your camera for shake free ramped or even holy grail time-lapses.Using the USB tether feature of your existing camera, you can easily add remote operation. Stop and start video recordings to speed up production and maintain physical distance on set, or use remote triggering for steady stop motion. With integrated Bluetooth and Wi-Fi, the device can operate from 10 metres away and can be wirelessly updated as new functionality is developed. Features Use the Syrp App to remotely control camera settings like aperture, shutter speed and ISO for video and holy grail time-lapseEasily setup time-lapses from the app specifying record time, interval and playback timeHDR mode for time-lapse and photographyLive Control mode for adjusting exposure settings and trigger a photo or start a videoUse Live Control Mode for Stop Motion without having to touch your camera Holy Grail Time-Lapse.Genie Micro will include the much-anticipated feature of being able to ramp exposure on your camera remotely while shooting time-lapse. This allows you to capture timelapses from day to night or visa versa. These shots are usually created by manually ramping exposure on the camera, but the risk is that you bump the camera and have a shakey time-lapse. Being able to control exposure from the app means you can perfectly ramp exposure without having to touch your setup   Control Cameras SimultaneouslyUsing more than one Genie Micro you can control more than one camera at the same time allowing you to trigger a video or photo from the app. For a 2 camera interview using other Syrp products as your bcamera it's possible to hit record on the app and start recording on both cameras. It also allows physical distancing from your subject Stop MotionUsing Live Control you can shoot stop motion sequences without having to touch your camera. Trigger the photo directly from the app with the tap of a button   Connect via USB-CFor more advanced control like controlling aperture, ISO and Shutter Speed use the USB-C port to connect your camera. For cameras that do not have USB-C use he supplied USB-C -> USB-A adapter Connect via Syrp Link CableFor a basic camera triggering simply use the existing Syrp link cable to trigger photos for timelapse or stop motion Specifications Interface: USB-C, 2.5mm Camera Port, WiFi, Bluetooth 4.0Charging Type: USB-CBattery Life: 7 hoursCamera Mounting Screw: Hot Shoe AdapterDimensions: 10.5 x 10.5 x 5.8cmWeight: 29g

    2 in stock

    $309.00

  • Last stock! SYRP MAGIC CARPET PRO END CAPS AND CARRIAGE - Actiontech

    Syrp Magic Carpet Pro End Caps And Carriage

    1 in stock

    Magic Carpet Pro End Caps & Carriage used with Magic Carpet Pro Tracks to create smooth tracking shots with heavier camera rigs. Product Description Slide the carriage onto your Magic Carpet Pro track, click the end caps into both ends and you have setup your Magic Carpet Pro in seconds. The Magic Carpet Pro End Caps & Carriage work on any length of Magic Carpet Pro track.The Magic Carpet Pro Carriage includes an interchangeable camera thread, bubble level and brake for safe transport. Activate the flywheel on the inside of the carriage with a press of a button for incredibly smooth shots using larger cameras or switch if off completely for lower pay loads.The 90mm Quick Release System included in the carriage is specifically designed to keep your camera secure while keeping you mobile by allowing you to quickly and easily de-tach your whole camera setup from the slider.Magic Carpet Pro legs on the End Caps are designed to be quick release and fold out so the slider can be used on the ground without the need for tripods.The Magic Carpet Pro End Caps and Carriage are included with the Magic Carpet Pro Slider kit and is available as an optional spare part to replace a lost or damaged standard part. In the box: 1 x Magic Carpet PRO Carriage2 x Magic Carpet PRO End Caps1 x Quick Release 1/4"-20 Camera Screw Square 1 x Quick Release 3/8"-16 Camera Screw Square1 x Quick Release Plate 90mm Specifications Weight: 3.194 kgCompatibility: Magic Carpet PROCamera Mounting Screw: 1/4"-20 Male, 3/8"-16 MaleTripod Mounting: Female 3/8"-16 thread, Female 1/4"-20 thread

    1 in stock

    $1,319.00

© 2026 Actiontech, Powered by Shopify

      Login

      Forgot your password?

      Don't have an account yet?
      Create account

      APP EMBED BLOCK

      scriptURL: