Peak Design Anchor Mount

    Description

    Attach your Peak Design strap (or any standard OEM neck/hand strap) directly to the bottom of your camera in the most low-profile unobtrusive way possible.

    Product Description
    Unlike a tripod plate Anchor Mount is so small and slim that it won’t hinder access to battery compartments or flip screens. Plus when you connect one end of your strap to Anchor Mount your camera will hang with the lens facing downward—this gives you far more stability and comfort when using longer lenses.
    Ultra-strong machined/anodized aluminum construction. Note that Anchor Mount is not tripod or Capture compatible.
    1 On The Side 1 On The Bottom We Often Recommend Attaching 1 End Of Your Peak Design Strap To Your Camera'S Side Strap Lug (Opposite The Grip) And The Other End To The Bottom. These 2 Connection Points Let The Camera Hang With The Lens Facing Down For Greater Comfort And Stability Especially With Longer Primes And Zooms. Anchor Mount Is The Most Low-Profile Unobtrusive Connection Point Available For Peak Design Anchors And Standard Camera Straps.

    Works With All Pd Straps Attach Pd Anchors To Increase Your Carry Options With Any Of Our Straps. Compatible With All Versions Of Our Anchors And Straps. Works With OEM Straps Attach Any Standard Camera Neck Strap Or Wrist Strap. Works With Strap Ends Up To 11mm Wide.

    Twist Resistant Ultra-Secure 4mm Hex Drive With Anti-Twist Pad. Fits Any Camera Screws Into Any Standard 1/4 inch inch -20 Tripod Socket. Super Strong Rugged Weatherproof Machined/Anodized Aluminum Construction.

    Whats in the box

    1. 1 x Anchor Mount

    2. 1 x 4mm hex key

    Materials: Anodized Aluminum Plate With Hard Rubber Anti-Twist Pad Turned/Machined Stainless Steel Hex-Drive Screw Weight:  Unpackaged: 18 g Packaged: 36 g Size Length: 30 mm  Width: 20 mm Height (Protrusion From Camera): 5 mm Strap Loop Size: Fits Straps Up To 13mm  Strength Rating: Can Withstand Well Over 200 lbs (90 kg) Making Anchor Mount Safe For Use With The Largest Of Professional Cameras.
    Product form

    Attach your Peak Design strap (or any standard OEM neck/hand strap) directly to the bottom of your camera in the... Read more

    Free pickup in our shop(s)

    SKU: PL-AN-1
    Barcode: 818373020101

    5 in stock

    $20.00

      Description

      Attach your Peak Design strap (or any standard OEM neck/hand strap) directly to the bottom of your camera in the most low-profile unobtrusive way possible.

      Product Description
      Unlike a tripod plate Anchor Mount is so small and slim that it won’t hinder access to battery compartments or flip screens. Plus when you connect one end of your strap to Anchor Mount your camera will hang with the lens facing downward—this gives you far more stability and comfort when using longer lenses.
      Ultra-strong machined/anodized aluminum construction. Note that Anchor Mount is not tripod or Capture compatible.
      1 On The Side 1 On The Bottom We Often Recommend Attaching 1 End Of Your Peak Design Strap To Your Camera'S Side Strap Lug (Opposite The Grip) And The Other End To The Bottom. These 2 Connection Points Let The Camera Hang With The Lens Facing Down For Greater Comfort And Stability Especially With Longer Primes And Zooms. Anchor Mount Is The Most Low-Profile Unobtrusive Connection Point Available For Peak Design Anchors And Standard Camera Straps.

      Works With All Pd Straps Attach Pd Anchors To Increase Your Carry Options With Any Of Our Straps. Compatible With All Versions Of Our Anchors And Straps. Works With OEM Straps Attach Any Standard Camera Neck Strap Or Wrist Strap. Works With Strap Ends Up To 11mm Wide.

      Twist Resistant Ultra-Secure 4mm Hex Drive With Anti-Twist Pad. Fits Any Camera Screws Into Any Standard 1/4 inch inch -20 Tripod Socket. Super Strong Rugged Weatherproof Machined/Anodized Aluminum Construction.

      Whats in the box

      1. 1 x Anchor Mount

      2. 1 x 4mm hex key

      Materials: Anodized Aluminum Plate With Hard Rubber Anti-Twist Pad Turned/Machined Stainless Steel Hex-Drive Screw Weight:  Unpackaged: 18 g Packaged: 36 g Size Length: 30 mm  Width: 20 mm Height (Protrusion From Camera): 5 mm Strap Loop Size: Fits Straps Up To 13mm  Strength Rating: Can Withstand Well Over 200 lbs (90 kg) Making Anchor Mount Safe For Use With The Largest Of Professional Cameras.

      © 2024 Actiontech, Powered by Shopify

          Login

          Forgot your password?

          Don't have an account yet?
          Create account