CHASING M2 PRO Battery The large-capacity lithium battery of Chasing M2 PRO is removable and can be charged independently. Multiple batteries are used by turns, which can greatly extend underwater working time. 300Wh Battery Battery Capacity: 14AH Diameter: 120mm Length: 290mm Weight: 2550g Runtime: Up to 3 hours

Read more less

Analog video cables for dual-channel BlackVue dashcams.Compatible with DR590X-2CH, DR590X-2CH IR, DR590W-2CH, DR590W-2CH IR, DR590-2CH, DR590-2CH IR, DR490-2CH, DR490L-2CH.Note: For DR750-2CH LTE, DR900X, DR750X, DR900S, DR750S, DR650S series, DR430-2CH, DR470-2CH, use the Coaxial Video Cable.Model name: AC-10 Jack Type: Phone TRRS(Right Angle) to Phone TRRS(Straight) Length: 10 m Weight: 150 g

Read more less

The Blackvue Tamper-Proof Cases are designed to prevent access to critical components of the dashcam. All models block access to the microSD card slot and the power and video cable connectors on the front camera. The Tamper-Proof Cases for X Series models also allow to lock the angle of the front camera. BTC-1C: ¥ For DR900X and DR750X Series models. ¥ For all windshield types (sedan, bus, truck, etc.). (Windshield angle of 5¡Ð90¡ with the horizontal) ¥ Rotation lock via hex screw. Note: this tamper-proof case replaces the dashcam mount. Compatible Models: ¥ DR900X Series (DR900X-1CH, DR900X-2CH, DR900X-2CH IR) ¥ DR750X Series (DR750X-1CH, DR750X-2CH, DR750X-2CH IR, DR750X-2CH TRUCK - NOT LTE VERSION)

Read more less

BVT-112 hook & loop tapeVelcro tape for BT-112.BVT-112 (B-112 Velcro) Color: black

Read more less

The External GPS Receiver adds speed and location data to your videos. Speed: speed dataÐin Km/h or MphÐwill be overlaid in the video (can be turned off in the dashcamÕs settings). Location: you can visualize the location of your vehicle in the BlackVue ViewerÕs Map during video playback.

Read more less

Replacement BlackVue RM-75 mount for RC110 and RC1-300 rear cameras.

Read more less

Voltage: 12v Size: 4.3mm x 5.5mm Compatible: Nitecore I2/I4/D2/D4 charger and any other same size charger Weight: 39g Note: Not compatible with Nitecore Tiny Monster (TM) Series.

Read more less

Description Designed for medical personnel and first responders, Nitecore MT06MD Medical Flashlight is a sleek and slim pocket torch suited to a wide range of uses. Its Nichia 219B LED mimics sunlight for accurate colours and contrasts, its waterproof aluminium housing stands up to the elements, and it runs on widely available AAA batteries. The MT06MD offers three output levels, including a 4-lumen low power setting ideal for pupil inspection. Runtimes for the two AAA's range from 35 minutes at the 180-lumen high power setting to 35 hours on low. Easily turned on and off with the tailcap push-button switch, the light features constant current circuitry for a stable and consistent output across the life of the batteries. Its hard anodised aluminium housing is IPX8-rated, submersible to 6.6' and suited to sterilization by submersion in alcohol. The stainless steel pocket clip keeps the light securely in place and ready for use. Features Performance Low: 4 lumens Moed: 45 lumens High: 180 lumens Nichia 219B LED emitter High colour rendering index for accurate colours and contrast Low power setting suited for pupil inspection Photobiologically safe Digitally-regulated output ensures consistent beam intensity throughout life of battery Switching Location: Tailcap Type: Push button Constant-on mode only Turn light on, press switch half-way to cycle through outputs Construction Lightweight and durable aluminium alloy housing Corrosion and scratch-resistant anodised finish Anti-reflection coated scratch and shatter-resistant tempered glass window Impact-resistant to 5', IPX8-rated waterproof and submersible to 6.6' Lightweight designs weighs in at 0.8 oz without batteries Runs on two alkaline or NiMH AAA batteries Stainless steel pocket clip Specifications General Lumen Output High: 180 Lumens Medium: 45 Lumens Low: 4 Lumens Illumination Source 1 x LED Power Estimated Runtime High: 0.75 Hours Medium: 5.25 Hours Low: 35 Hours Battery Type 2 x AAA Alkaline Physical Material of Construction Aluminium Water Resistance Waterproof to 6.6' / 2 m, IPX8 Impact Resistance Yes, 5.0' / 1.5 m Dimensions ¿: 0.6 x L: 5.0" / ¿: 1.4 x L: 12.7 cm Weight 0.8 oz / 22 g (Without Batteries)

Read more less

A119MNTGPSV3 - VIOFO Updated GPS Mount for A119 V3 VIOFO updated GPS Mount for the A119 Version 3 (V3) series dash camera Syncs date/time and Logs GPS data Got Two Vehicles? Add a 2nd updated GPS Spare Mount. Pass through mini USB power port for V3 Quick Release GPS Mount. Not compatible with other version of the A119. Version 3 (A119V3) only.

Read more less

The A129 PRO Single is one of the highly-anticipated 4K dash cams of the year. Keeping the same sleek design of its predecessor, the Viofo A129 Single, and now with the 8.29MP Sony Exmor R image sensor and the Novatek 96685 processor to deliver eye-popping 4K UltraHD (3840*2160) resolution at 30 FPS. Following the success of the A129, the PRO version is equipped with a 2.0" high-definition screen, a user-friendly button interface and an external GPS receiver that is built into the adhesive mount (included in the package). On top of that, the Wi-Fi module allows you to leverage your smartphone screen by pairing it with the camera. Just install the iOS for your iPhone or the Android app on your smartphone and you'll be able to playback and download your footage or access settings within seconds. Would you like your dash cam to operate not only while you're driving but when you're away too? The A129 PRO has got this sorted too with Parking Recording by Motion Detection! Matching the camera with either the Viofo 3-pin Hardwire Cable (requires hardwiring) or a Back-Up Battery will allow the cam tam to trigger recording on motion detection as well as on impact detection so that protection will be readily available for the vehicle while the owner is away. KEY FEATURES Crystal-clear video quality is achieved by the advanced 8.29MP Sony Exmor R image sensor. Built-in Wi-Fi allows you to view live video, change settings, playback and download videos to your mobile device (within 10-15 meter range around the car). The built-into-mount GPS receiver logs your vehicleÕs location, speed and current time so you can later visualize its position on the map. Protect yourself from hit-and-run accidents while your car is parked with motion-activated Parking Mode (requires a Power Management Device). Low-profile and discreet design. Up to 256GB memory card support. **We reccommend SanDisk Extreme MicroSD V30 cards 128gb and above**

Read more less

Sophisticated Attachments 4 Hours Runtime Anti-Stuck Motor Direct-Connect Remote Controller Removable SD Card Dive To 330ft 4K UHD EIS Camera User Friendly Interaction     GLADIUS MINI S is a portable, easy-to-use, and reliable consumer-grade underwater drone that can be used for underwater creative photography, diving explorations, and safety inspections. It is easy to operate and carry, and has a compact aluminum alloy body design. More Mounts, More Adventures Support Accessory Mounting, More Ways to Play GLADIUS MINI S underwater drone supports the mounting of a grabber claw, sports cameras, and more. More ways to play, more fun. Patented Motor Effectively Reduces the Chance of Being Stuck The patented anti-stuck motor technology greatly reduces the probability of the motor getting stuck in the sand, and it works safely and reliably in all kinds of complicated underwater environments. Direct-Connect Remote Controller, No Disconnections The remote controller supports Wi-Fi and data transfer cable connections to mobile phone/tablet devices, and wired transmission is more stable, which completely solves the problem of Wi-Fi disconnection during use. High Capacity Battery, Runtime up to 4 Hours Equipped with two 4800 mAh batteries. The battery life of GLADIUS MINI S is up to 4 hours. 100m x 200m Shooting Range, 4 Knots Maximum Speed With a maximum speed of 4 knots (2 m/s), a maximum dive depth of up to 100 meters, and a maximum horizontal shooting radius of up to 200 meters, GLADIUS MINI S underwater drone fully meets your underwater shooting needs. 100 meters Maximum working depth 4 knots Maximum speed 4 hours Runtime 4K+EIS Image Stabilization Camera Equipped with a 1/2.3 SONY CMOS, EIS anti video-shake feature, F1.8 lens, and 2400 lumen LED lights, GLADIUS MINI S underwater drone can clearly capture underwater details even in low light. 4K Video resolution 12M Max.photo resolution 152° FOV F1.8 Lens Real-time Recording of Depth and Temperature Data Real-time return of underwater temperature, depth, and other parameters from GLADIUS MINI S provide you with underwater data support. Small, Portable, and Travels Easily GLADIUS MINI S inherits the streamlined body design, and is small and lightweight. Fits easily in a backpack so you can easily take it anywhere you want to go. Size: 400*226*145 mm ｜ Weight: 2.7 kg User Friendly Interaction Live broadcast Social media sharing HDMI output Time-lapse photography Slow motion Quick editing features Simultaneous Three-Device Sharing GLADIUS MINI S supports viewing underwater images on three devices simultaneously to meet the need for multiple viewers. Removable SD Memory Card, Downloaded Anytime and Anywhere The built-in 64G SD memory card is removable for easy downloads anytime and anywhere.   Product Specifications Max Depth 330 ft (100 m) Video Stream 60 M Tether Length 328 ft (100 m) / 656 ft (200 m) SD CARD 64 G Video 3840 x 2160 (Ultra-High Definition) Max Resolution 12 MEG DRONE SIZE400*226*145 mm WEIGHT6 lbs MAX DEPTH330 ft MAX SPEED2 m/s (4 Kn) RUNTIME4 H (Calm water)1 H (Maximum speed & light) BATTERY4800 mAh × 2 OPERATING TEMPERATURE-10℃~45℃ REMOTE CONTROLLER SIZE160 * 155 * 125 mm WEIGHT685 g BATTERY2500 mAh RUNTIME≥6H (according to condition) WIRELESSWi-Fi supported DIRECT-CONNECT RC TYPELightning, Micro USB, USB-C HDMISupport PHONE / PADMaximum screen 13 inch CAMERA CMOS1/2.3 LENSF1.8 FOCUS1 m ISO RANGE 100-6400 FOV152° MAX RESOLUTION12 MEG FORMATJPEG / DNG VIDEOUHD：3840*2160（4K）30fpsFHD：1920*1080（1080p）30/60/120fps SLOW MOTION720p：8x (240fps)1080p：4x (120fps) TIME LAPSE4K/1080p supported VIDEO STREAM60 M VIDEO FORMATMP4 SD CARD64 G SENSOR IMU3 axis gyro / accelerometer / compass DEPTH SENSOR≤ ± 0.25 m TEMPERATURE SENSOR≤ ± 2 ℃ CHARGER POWER3A / 12.6V ROV CHARGING TIME3.5 H RC CHARGING TIME2 H LED BRIGHTNESS2 x 1200 Lumens COLOR TEMPERATURE5000K - 5500K CRI85 DIMMINGTHREE GEARS     

Read more less

QUAD LOCK OUT FRONT MOUNT V2 Choose between the Quad Lock Out Front Mount or the Quad Lock Out Front Mount PRO. SECURE MOUNTING Both mounts come with our patented dual-stage lock, which allows you to ride with confidence knowing that your smartphone will stay secure on your bike, no matter the terrain. QUICK TO ATTACH / DETACH Simply twist and lock to view apps as you ride such as Strava, MapMyRide or Apple maps. Detach just as easily so you don't miss a photo opportunity or important call. Remember, it's all in the technique, not the force. UNRIVALLED DESIGN Both mounts are designed for aerodynamics. The Out Front Mount PRO features a lower profile and super rigid anodised aluminium mounting arm. The standard Out Front Mount can be reversed to go over the stem of your bike's handlebars. Add a coloured lever to style your Quad Lock Out Front Mount or Out Front Mount PRO to your bike.

Read more less

The Quad Lock Desk Mount is a stylish addition to your home or office. SECURE MOUNTING The re-usable nano suction base ensures the Quad Lock Desk Mount holds securely at all times and means placing and removing your phone from the mount only requires one hand. PERFECT VIEWING Use the gimbal head to adjust your device to the optimal viewing angle. Easily change your phone to portrait or landscape with one motion. MAG & WIRELESS CHARGING (OPTIONAL) Upgrade your Mount with one of our two Quad Lock MAG Heads and make mounting your phone even easier. Add the Quad Lock MAG Wireless Charging Head or Quad Lock Original Wireless Charging Head for fast wireless charging, and never run out of battery when you need it. Quad Lock MAG Case or MAG Universal Adaptor required for use with MAG Heads. Universal Adaptors not compatible with Wireless Charging Heads.

Read more less

12V Ring Terminal Battery Indicator Cable: Provides Instant Indication of Battery Status For 12V Batteries.

Read more less

Extend your batteries life with the Schumacher SPi 10 Battery Charger 12V/10A. It is a fully automatic 10-Amp battery charger/maintainer. The battery charger is microprocessor controlled and designed with multi-stage charging to ensure it is faster, smarter and safer. The Schumacher SPi 6 charges battery types such as AGM, Standard, Gel Cell, Calcium and Start/Stop. It charges the battery up to three times faster than traditional chargers. It features a digital display, a hook attachment, battery clamps and ring connectors. Made with an IP Rating, IP20. Product Description Benefits & Features 12V / 10A Automatic Microprocessor controlled - multi-stage charging for added precision, safety and battery life For battery types Ð AGM, Standard, Gel Cell, Calcium, Start/Stop Extends battery life - up to 2 years longer 3 x faster charging than traditional chargers Float mode monitoring Reverse hook-up protection Hook attachment, language button, digital display, LED indicators, AC power cord, battery clamps and ring terminal (quick-connect) IP Rating: IP20 Input: 230V AC, 50Hz, 2.0A Output: 12V DC @ 10A

Read more less

The Schumacher SPi 2 Battery Charger 6-12V/2A is ideal for keeping your batteries charged. It is a fully automatic 2-Amp battery charger/maintainer. A key feature of the battery is that it is microprocessor controlled and designed with multi-stage charging to ensure it is faster, smarter and safer. The Schumacher SPi 2 is suitable for most battery types such as AGM, Standard and Gel Cell. It charges the battery up to three times faster than traditional chargers. It includes a hook attachment for hanging, battery clamps and ring connectors. Made with an IP Rating, IP54. Product Description Benefits & Features* 6-12V / 2A Automatic Microprocessor controlled - multi-stage charging for added precision, safety and battery life Maintains power sport, car, motorcycle, ATV, RV, boat batteries Connect It and Forget It all season long Monitors and maintains the battery when fully charged Resumes continuous charging when battery becomes discharged For most battery types - AGM, Standard, Gel Cell Extends battery life - up to 2 years longer 3 x faster charging than traditional chargers Float mode monitoring Auto-voltage detection Quick-connect harness and reverse hook-up protection Hook attachment, LED indicators, AC power cord, battery clamps and ring connectors (quick-connect) IP Rating: IP54 Input: 230V AC, 50Hz, 0.5A Output: 2A @ 6V/12V DC Dimensions: 193mm(h) x 84mm(w) x 78mm(d)

Read more less

The Schumacher SPi 3 Battery Charger 12V/3A is an energy efficient solution that extends battery life. It is a fully automatic 3-Amp battery charger/maintainer with lithium mode. The battery charger is microprocessor controlled and designed with multi-stage charging to ensure it is faster, smarter and safer. The Schumacher SPi 3 is suitable for charging battery types such as Lithium LiFeP04, AGM, Standard and Gel Cell. It charges the battery up to three times faster than traditional chargers. It features a digital scrolling display, a hook attachment, battery clamps and ring connectors. Made with an IP Rating, IP64. Product Description Benefits & Features* 12V / 3A Automatic Microprocessor controlled - multi-stage charging for added precision, safety and battery life Maintains power sport, car, motorcycle, ATV, RV, boat batteries Connect It and Forget It all season long Monitors and maintains the battery when fully charged Resumes continuous charging when battery becomes discharged For battery types Ð Lithium LiFePO4, AGM, Standard, Gel Cell Extends battery life - up to 2 years longer 8-stage charging - 3 x faster charging Float mode monitoring Quick-connect harness and reverse hook-up protection Hook attachment, battery type/language button, digital scrolling display, LED indicators, AC power cord, battery clamps and ring connectors (quick-connect) IP Rating: IP64 Input: 230V AC, 50Hz, 0.6A Output: 12V DC @ 3A Dimensions: 194mm(h) x 89mm(w) x 83mm(d)

Read more less

QUAD LOCK MOTORCYCLE USB CHARGER Keep your phone charged while you ride with the Quad Lock Motorcycle USB Charger.   EASY INSTALLATION Seamlessly integrate the Motorcycle USB Charger with any Quad Lock Moto Mount (Handlebar, Mirror or Fork Stem) or 1" Ball Adaptor. The Charger is neatly positioned under the Quad Lock mount head to provide USB power without the need for long charging cables. The 1.5m SAE connection cable and 20cm SAE to battery ring terminals give you the option to connect directly to your Battery Terminal or existing SAE Port. The charger draws Zero current when not in use so there is no danger of draining your battery.   FAST CHARGING & SURGE PROTECTION The Quad Lock Motorcycle USB Charger supports Quick Charge 2.0 for Fast Charging. With integrated Surge and Polarity Protection to keep your device safe from human error (also known as wrong installation).   IP66 WATER RESISTANT RATING Unless you're taking your bike under water (which we don't recommend), the IP66 water resistant rating means there is no need for a cap to cover the USB port, no matter how heavy the rain.

Read more less

CHASING M2 PRO MAX is an Industrial grade underwater remote operated vehicle (ROV) designed for Government and enterprise users. It adopts new generation of accessories mounting method, quick assembly and disassembly technology, shore based power supply and external floodlights provide easier-to-use, more professional, and more reliable underwater solutions for various industrial applications.       Product Specifications CHASING M2 PRO MAX Maximum Depth 200m Video Maximum Stream 60M Maximum Battery Life ＞4h Micro SD Card Memory 128G Maximum Image Resolution 12 M Normal Video FHD: 1920 x 1080 (1080p) 30 / 60 / 120 fps ROV Size 608 x 294 x 196 mm (Excluding the floodlight) Weight ≈8 KG Maximum Depth 200m Pull (forward / drift upwards / traverse) 5.7 / 4.0 / 3.6 KG Maximum Battery Life ＞4h Battery 302.4Wh Operating Temperature -10 ℃ ~ 45 ℃ E-Reel Size 296x189x279 mm Weight 3.5 KG Max Storage Length 200 meters Battery Capacity 4800 mAh Number of Cycles >300 times Runtime 30 times Wiping Speed 3 gears Take-Up Speed (200m) Fast speed 220 s Low speed 9 min Operating Temperature -10℃~45℃ Charging Time 2 H (12 V ) / 4 H (25.2 V) Remote Controller Size 160 x 155 x 125 mm Weight 685 g Battery Capacity 2500 mAh Battery Life ≥6H (Depend on working condition) Wi-Fi Support HDMI support USB support Phone / Tablet Clip Maximum support 10 inches LED Lights Brightness 2 x 4000 lm Color Temperature 5000 K ~ 5500 K CRI 85 Dimming Three adjustable Sensor IMU Three-axis gyroscope acceleration compass Depth Sensor ＜±0.25 m Temperature Sensor ＜±2 ℃ Adapter Adapter 8 A / 25.2 V ROV Charging Time 2.5 H Remote Controller Charging Time 2 H Camera CMOS 1/2.3’’ Aperture f/1.8 Focal Length 0.3m~∞ ISO Range 100-6400 Field of View 150° Maximum Image Resolution 12 M Image File Types JPEG / DNG Normal Video UHD: 3840 x 2160 (4K) 30 fps FHD: 1920 x 1080 (1080p) 30 / 60 / 120 fps Slow Motion Video 720p: 8x (240fps) 1080p: 4x (120fps) Time-Lapse Video 4K / 1080p Video Maximum Stream 60 M Video Type MP4 Micro SD Card Memory 128 G Packing List Name Qty Illustration Name Qty Illustration Drone 1 CHASING E-Reel 200m tether 1 Charging cable & 3-in-1 Charger 1 Remote Controller 1 Data cable 3 Carrying case 1 Backpack for accessories 1 Towel 1 23.6 x 1.8 O-rings 2 19 x 1.8 O-rings 4 12.5 x 1.5 O-rings 4 M3 x 8 Combination screw 10 M3 x 8 Machine screw 5 M5 small flat washer 6 M5 spring washer 6 Cross/Hexagon dual-purpose screwdriver 1 Flat wrench 1 Sealing cover of the tether socket 1 Sealing cover of the peripheral socket 2 Thruster shield 8 Left/Right floodlight Spare parts for mounting support 2 Information Kit 1

Read more less

Overview To connect car power outlet to SDC or SDC Lite port on a DJI Power-series power station for charging the latter after the car starts. The accessory described comes in two parts: one XT60 to SDC Module, and one Car Power Outlet to XT60 Power Cable. The XT60 to SDC Module can also act as a solar panel adapter module (MPPT), suitable for connecting one Zignes 100W/120W Solar Panel. In The Box XT60 to SDC Module × 1 Car Power Outlet to XT60 Power Cable × 1 Specifications Input specification: 12-30 V, DC Max Output Power: 65 W Operating Temperature: -10° to 45° C (14° to 113° F) Compatibility DJI Power 1000 DJI Power 500

Read more less

IMMERSIVE MOTION CONTROL  When used with DJI Goggles 3, the drone's motion responds to your wrist movements. Combined with DJI RC Motion 3's robust anti-interference capability, you can achieve precise "point-to-fly" control.  QUICK CONTROL WITH AR CURSOR  When used with DJI Goggles 3, you can use the RC to control an AR cursor and navigate the menu on the goggles' screen. Enabling functions, and adjusting camera settings has never been more intuitive and efficient.  COMPACT AND PORTABLE, FEATURE RICH  Light and portable, DJI RC Motion 3 features a streamlined design for a comfortable grip. A natural layout of various function buttons on its compact body enables you to perform takeoffs, stops, and mode switches with just a 'push' of your finger. Tips Using DJI RC Motion 3 alone cannot control the drone. It requires pairing with DJI Goggles 3. Compatibility DJI Avata 2 DJI Mini 4 Pro DJI Air 3 DJI Goggles 3 IN THE BOX DJI RC Motion 3 × 1DJI RC Motion 3 Lanyard × 1

Read more less

NOTE: ALL REPLACEMENTS WILL TAKE 3 - 4 WEEKS FROM THE TIME YOUR CLAIM IS RECEIVED. CARE REFRESH IS A NON-REFUNDABLE AND NON-RETURNABLE ITEM, ONCE CODES HAVE BEEN SUPPLIED THEY CAN NOT BE RETURNED.   FEATURES Provides two replacement units for an additional charge as per the table below. The Care Refresh 1-year Plan lasts for one year from the date it is bound to your product, and covers for accidents such as water damage or collisions, letting you fly with peace of mind. DJI Care Refresh 1-Year Plan ReplacementService Number of Replacements 2 Number of Flyaway Replacements 1 Replacement Fee $219.00 Flyaway Replacement Fee $439.00 Extended Warranty Period Official warranty is provided during the validity period Support Renewal? Renew 1-Year Plan up to twice Please Note: DJI Care Refresh can be bound to your DJI product when it meets one of the following criteria: Brand new and un-activated product. Aircraft or gimbal activated within the last 48 hours. Handheld device activated within the last 30 days. *If your craft has been activated for over 48 hours, follow the instructional guide linked below to verify your craft is in good working order and still eligible for DJI Care Refresh. Video Verification Guide Each time you request a replacement, you’ll receive a replacement unit that is new or equivalent to new in performance and reliability. If you have a DJI Care Refresh activation code, click here to bind it to your aircraft. WATER DAMAGE COVERAGE We'll replace your aircraft if an accident occurs, even if it's damaged by water.  TWO REPLACEMENTS, TOTAL PEACE OF MIND For an additional charge, DJI Care Refresh offers up to two replacement units within one year and covers accidents such as water damage, crashes and collisions. These replacement units will be new or equivalent to new in performance and reliability. DJI CARE REFRESH REPAIR PROCESS Ferntech will handle the entire DJI Care Refresh replacement process, which is as follows: Request a Care Refresh replacement via our online Service Request Form Delivery of damaged item* – please contact our helpful team at info@ferntech.co.nz and they will provide details on how to get your product to us. Product assessment by Ferntech team – upon completion, we will select the cheapest option to either have your product repaired or replaced under your DJI Care Refresh policy. Please advise if you would like to have your product replaced even if a repair is cheaper. *We require your product to complete the DJI Care Refresh process. Please Note: DJI Care Refresh covers return shipping fees back to your address. DJI Care Refresh and the corresponding product must be purchased from New Zealand. DJI Care Refresh only supports aircraft purchased from official or authorised channels. Please find detailed terms and conditions under the warranty tab above. If you want to purchase DJI Care Refresh for an aircraft that has been activated for over 48 hours, follow this Video Verification Guide. DJI FLYAWAY COVERAGE (DRONE NOT RECOVERED) Care Refresh offers 1x Flyaway Cover if your DJI Avata 2 is not recovered. To have Flyaway Cover active you need to bind your craft and remote controller to your DJI account by following this video. For any Flyaway case, you will need to lodge a Flyaway report through the DJI Fly application and then contact us.

Read more less

Note: Diffusion (Mist) Strength of 1/8 with VND Optics: Pure High Definition Optical glass 18Layers Multicoated ensure filmmaking experience Built: Hard stop Variable ND eliminates any chance of cross-polarization & zero vignetting (16mm above) during the shoot Function: 6-9 Stop equivalent to ND64-ND512 is the ultimate all-day solution from cloudy days to a bright sunny day for all your videography needs  What is included: Variable ND Filter, Hard Case, Lens Cap, Cleaning Cloth

Read more less

• LONG THROW TACTICAL FLASHLIGHT - The Nitecore SRT7i emits up to 3000 lumen beam with a throw of over 634 yards. • USB-C RECHARGEABLE - fast charging waterproof USB-C port, max runtime of over 3 hours on turbo and 800 hours on ultralow. A battery status indicator reminds you it’s time to recharge. • SMART SELECTOR RING- supports single hand operation with stepless brightness adjustment from 1 to 3000 lumen and quick access to the strobe and turbo. Guarded tail cap for tail stand capability. • READY FOR ACTION - Rated IP68 waterproof to use safely in any climate, Impact resistant up to 2 meters. A stainless steel bezel with three silicone nitrided inlays for glass breaking. Contents: Nitecore SRT7i with Battery, USB-C Charging Cable, Holster, Clip, Lanyard, a lumentac Organizer Max Output 3,000 Lumens Max Beam Distance 580 Meters Max Beam Intensity 87,500 cd Max Runtime 800 h 0 m / 33.33 d Reflector SMO Battery 1 × 21700i, 2 × CR123, 2 × RCR123 Special Modes STROBE Beam color White Light Length 163 mm / 6.42 in Head Size 40 mm / 1.57 in Weight 175 g / 6.17 oz Feature STROBE READY, Rechargeable, Tail Stand, Smart Selector Ring Activity Gear, Law Enforcement, Search, Outdoor/Camping

Read more less