Created for outdoor aerial imaging, the CrystalSky monitor features an ultra-bright screen that is clearly visible in sunlight. It is designed from the ground up to work seamlessly with the DJI GO app, giving camera operators total control. Product Description A maximum 1000 cd/m² of brightness means the CrystalSky monitor is more than four times as bright as typical mobile devices. On-screen details are clear and sharp, and colours are vibrant, giving the quality needed to fine tune image composition. A dedicated Sunlight Readability Enhancement mode is especially designed for processing the image in real-time to ensure more comfortable viewing under bright light. SMOOTHER VIDEO DISPLAY The CrystalSky monitor uses optimized video decoding to decode video in real-time. Due to limitations in software access on smartphones and tablets, video decoding in other smart devices is less than ideal. When used to view photos or videos transmitted by the camera, problems can occur including video jitter, long latency and more. The CrystalSky monitor’s optimized decoder provides smooth, real-time video with minimal latency. CUSTOMIZED SYSTEM AND DJI GO/DJI GO 4 A newly designed system removes unnecessary Android apps and services and is resistant to viruses and junk software. This ensures that the CrystalSky monitor is able to offer optimum performance at all times. Its embedded DJI GO/DJI GO 4 app provides full access to all DJI GO/DJI GO 4 features including aircraft parameter adjustment, camera control, footage management, and playback. Using offline maps, maps can be kept available even if going out of Wi-Fi reach. POWER SUPPLY A two cell 4920 mAh secondary external battery gives the CrystalSky monitor a longer operating time than comparable mobile devices. It supports quick charge, and controls its discharge rate well even in low temperatures. Used with the 7.85" and 5.5" screens, it can achieve a maximum operation time of 4-5 hours and 5-6 hours respectively. DUAL SD CARD SLOTS Equipped with dual Micro SD Card slots, the CrystalSky monitor’s storage can be extended, or footage recorded on a Micro SD Card can be played back directly on the monitor. It can also be used for footage backups. Using editors built in DJI GO/DJI GO 4, high-quality edits can be made quickly and instantly shared to social media.The CrystalSky monitor supports H.264 and H.265 video decoding, allowing it to play back these files at 30 fps and 60 fps respectively. These videos can also be output through its HDMI port. PORTS AND NETWORK The CrystalSky monitor’s HDMI port allows up to 4K video to be output to FPV goggles and other display devices. Built-in dual band Wi-Fi means it can connect to Wi-Fi networks and Wi-Fi hotspots from mobile devices, and it is also compatible with 4G dongles and USB storage through its USB-A port.When connected to the internet, the CrystalSky monitor gets easy access to system upgrades, livestreaming, photo or video sharing, data synchronization and more. File sizes are optimized as much as possible to minimize mobile data demands.Onboard Micro USB and USB-C ports make it convenient to connect the CrystalSky monitor with a remote controller or other devices. EXTREME TEMPERATURE OPTIMIZED Most smart devices are designed to operate in common temperature ranges. The CrystalSky monitor's external battery has been designed for more extreme temperatures. It is able to operate in as low as -4°F (-20°C) and, with its internal cooling system, functions normally in temperatures as high as 104°F (40°C). DJI AERIAL SYSTEM COMPATIBILITY The CrystalSky monitor can quickly connect to the Inspire series, Phantom 4 series, Phantom 3 series (Phantom 3 Professional, Phantom 3 Advanced), Matrice series, and Osmo series (except the Osmo Mobile) over Wi-Fi or via a remote controller USB port, depending on your specific product. *Also, CrystalSky easily attaches to the Cendence remote controller without an additional mounting bracket.*Monitor mounting bracket recommended. The Mavic Pro and Osmo series gimbal cameras(excluding the Osmo Mobile) are only compatible with 5.5" Crystalsky monitors. COMPATIBILITY Mavic ProPhantom 4 SeriesPhantom 3 SeriesInspire SeriesOsmoOsmo+Osmo ProOsmo RAWOsmo Pro/RAW - Wired Video AdapterCrystalSky - Osmo Pro/RAW Mounting BracketCendence Remote ControllerCrystalSky - Remote Controller Mounting BracketCrystalSky Mavic/Spark Remote Controller Mounting Bracket Product Specifications TECH SPECS Display: Multi-touch display with IPS technologyResolution: 1920x1080Brightness: 1000cd/m²Operating System: AndroidApp: DJI GO, DJI GO 4, DJI PilotMemory ROM: 32GB+RAM 4GBConnectors: HDMI, MicroSD card slots, Micro-USB and USB-CConnectivity WIFI: 2.4G, 5.2G&5.8G 802.11b, 802.11g, 802.11n(HT20), 802.11a 4G dongle supportGPS: GPS/GlonasGyroscope SupportCompass SupportSpeaker SupportBrightness Sensors SupportMIC SupportBuilt-In Battery: 980 mAh, 3.7VExternal Battery: 4920 mAh,7.6V(detachable)Operation Temperature: -20°C to 40°C (-4°F to 104°F)4K Video decoding: H.264 4k 30fps / H.265 4k 60fps DETAILED SIZE SPECS Without Battery: 153.76 mm x 84.94 mm x 19mmWith Battery: 153.76 mm x 84.94 mm x 39.6mmOuter Battery: 90 mm x 45 mm x 26mm In The Box CrystalSky Monitor x 1Intelligent Battery x 1Intelligent Battery Charging Hub x 1
Max 30 mins flight time. Product Description Professional aerial imaging benefits from longer flight times. The Phantom 4 Pro has a maximum flight time of 30 minutes, providing more time in the air to capture the perfect shot. The DJI GO 4 app shows battery lifetime and calculates remaining flight times according to distance traveled and more. It will give alerts when it reaches a minimum safe amount required for a safe journey back to the takeoff point. An advanced battery management system is also in place to prevent overcharging and over draining. When placed in longer term storage, batteries will discharge power to maintain good health. HIGHLIGHTS 30-minute flight timeView battery status via DJI GO app Self-discharge protectionOver-charge and discharge protection COMPATIBILITY Phantom 4 Series (Pro/Advanced)Phantom 4 Series Battery Charging HubPhantom 4 Series Car ChargerPhantom 4 Series 100W Battery ChargerPhantom 4 Series 160W Battery ChargerDJI USB Charger Product Specifications Capacity: 5870 mAhVoltage: 15.2 VBattery Type: LiPo 4SEnergy: 89.2 WhNet Weight: 468 gCharging Temperature Range: 41° to 104°F (5° to 40°C)Max Charging Power: 100 W
A brand new aerodynamic design giving the Phantom 4 series an impressive noise control performance. When used with the Phantom 4 Pro V2.0, up to 4dB (60%) of aircraft noise is lowered during takeoff and landing. Product Description These propellers have a brand new aerodynamic design giving the Phantom 4 series an impressive noise control performance. When used with the Phantom 4 Pro V2.0, up to 4dB (60%) of aircraft noise is lowered during takeoff and landing. Noise reduction is also enhanced when used with the Phantom 4 Pro. Please note, this comes with one pair (two) of propellers only. COMPATIBLE WITH: Phantom 4 Pro V2.0Phantom 4 ProPhantom 4 Advanced
The monitor hood fits perfectly onto your tablet to eliminate unwanted light reflection on your screen. HIGHLIGHTS High quality soft touch PU skinDurable and elegant designConveniently folds for portability, allowing you to carry it everywhere you go. COMPATIBILITY 12.9" iPad/Tablet
Small and light propeller protection for safer flight. Easy to mount and detach. Product Description Designed to protect people and objects from spinning propellers, these small and light Propeller Guards mount directly underneath the rotors to ensure flight safety. Install Propeller Guards onto corresponding frame arms. DO NOT mix them to avoid effecting the Vision System. HIGHLIGHTS Small and light propeller protection for safer flightEasy to mount and detach COMPATIBILITY Phantom 4 SeriesPhantom 4 Series Quick Release Propellers
The Phantom 4 Series Battery Charger is used to charge the Phantom 4 Intelligent Flight Battery and remote controller by connecting to a power outlet. It will take approximately 1 hour 10 minutes to fully charge a Phantom 4 Intelligent Flight Battery. Product Description The Phantom 4 Series Battery Charger is used to charge the Phantom 4 Intelligent Flight Battery and remote controller by connecting to a power outlet. It will take approximately 1 hour 10 minutes to fully charge a Phantom 4 Intelligent Flight Battery. COMPATIBILITY Phantom 4 SeriesPhantom 4 Series Intelligent Flight Battery (5870mAh, High Capacity)Phantom 4 Series Intelligent Flight Battery (5350mAh)Phantom 4 Series Battery Charging HubMavic Battery Charging Hub (Advanced)Phantom 4 Series 100W AC Power Adaptor Cable This charger does not include AC cables.
Phantom 4 100W AC Power Adapter Cable. Product Description Phantom 4 100W AC Power Adapter Cable COMPATIBILITY Phantom 4Phantom 4 ProPhantom 4 Pro+
Designed for the Phantom 4 Pro, the gimbal lock protects the gimbal and camera during transportation. Product Description Designed for the Phantom 4 Pro, the gimbal lock protects the gimbal and camera during transportation. COMPATIBILITY Phantom 4 ProPhantom 4 Advanced