The KonusFlash-5 head lamp from Konus provides hands-free illumination and with a 45° adjustable head you can precisely place the light where you need it. Choose between the 60-lumen high setting or the energy-saving 30-lumen low-power mode. 60 Lumen illumination Four selectable modes: 100% 50% Red light flashing red light Works with 1 AA battery Comfortable elastic band 45° of adjustment
This medium brush (M Layer) -- perfect for layering -- is hand made, with pure sable bristles in a fine point meaning exceptional control over details. The size makes it perfect for layering surfaces, and getting those effects that make your friends go 'wow'.
DJI Mavic Air 2 Low-Noise Propellers (Two propellers, one CW and one CCW) offer a quieter and longer flight.
Availability: In Stock
Product Description
Each blade has undergone a precise dynamic balance test, resulting in less flight noise, higher aerodynamic efficiency, lower power consumption, and improved endurance.
COMPATIBILITY
Mavic Air 2
Product Specifications
PRODUCT SPECIFICATIONS
Model: 7238 Low-Noise Propeller
Diameter × Thread Pitch: 18.3 × 9.7 cm
Weight: 4.8 g for each
In The Box
IN THE BOX
Propeller (Pair) x 1
Attach your Peak Design strap (or any standard OEM neck/hand strap) directly to the bottom of your camera in the most low-profile unobtrusive way possible.
Product Description
Unlike a tripod plate Anchor Mount is so small and slim that it won’t hinder access to battery compartments or flip screens. Plus when you connect one end of your strap to Anchor Mount your camera will hang with the lens facing downward—this gives you far more stability and comfort when using longer lenses.
Ultra-strong machined/anodized aluminum construction. Note that Anchor Mount is not tripod or Capture compatible.
1 On The Side 1 On The Bottom We Often Recommend Attaching 1 End Of Your Peak Design Strap To Your Camera'S Side Strap Lug (Opposite The Grip) And The Other End To The Bottom. These 2 Connection Points Let The Camera Hang With The Lens Facing Down For Greater Comfort And Stability Especially With Longer Primes And Zooms. Anchor Mount Is The Most Low-Profile Unobtrusive Connection Point Available For Peak Design Anchors And Standard Camera Straps.
Works With All Pd Straps Attach Pd Anchors To Increase Your Carry Options With Any Of Our Straps. Compatible With All Versions Of Our Anchors And Straps. Works With OEM Straps Attach Any Standard Camera Neck Strap Or Wrist Strap. Works With Strap Ends Up To 11mm Wide.
Twist Resistant Ultra-Secure 4mm Hex Drive With Anti-Twist Pad. Fits Any Camera Screws Into Any Standard 1/4 inch inch -20 Tripod Socket. Super Strong Rugged Weatherproof Machined/Anodized Aluminum Construction.
Whats in the box
1. 1 x Anchor Mount
2. 1 x 4mm hex key
Materials: Anodized Aluminum Plate With Hard Rubber Anti-Twist Pad Turned/Machined Stainless Steel Hex-Drive Screw Weight: Unpackaged: 18 g Packaged: 36 g Size Length: 30 mm Width: 20 mm Height (Protrusion From Camera): 5 mm Strap Loop Size: Fits Straps Up To 13mm Strength Rating: Can Withstand Well Over 200 lbs (90 kg) Making Anchor Mount Safe For Use With The Largest Of Professional Cameras.
A hard-wearing, tough plastic cube containing 20 green 12mm dice with skull icons in place of the 1, this dice cube features an embossed skull lid (you can never have too many skulls, after all) and is stackable – create your very own multicoloured henge of dice!
A hard-wearing, tough plastic cube containing 20 grey 12mm dice with skull icons in place of the 1, this dice cube features an embossed skull lid (you can never have too many skulls, after all) and is stackable – create your very own multicoloured henge of dice!
A hard-wearing, tough plastic cube containing 20 red 12mm dice with skull icons in place of the 1, this dice cube features an embossed skull lid (you can never have too many skulls, after all) and is stackable – create your very own multicoloured henge of dice!
A hard-wearing, tough plastic cube containing 20 blue 12mm dice with skull icons in place of the 1, this dice cube features an embossed skull lid (you can never have too many skulls, after all) and is stackable – create your very own multicoloured henge of dice!
A hard-wearing, tough plastic cube containing 20 bone 12mm dice with skull icons in place of the 1, this dice cube features an embossed skull lid (you can never have too many skulls, after all) and is stackable – create your very own multicoloured henge of dice!
BLADE REFILL 3PC ONLY
The Ceramic Scraper is a tool designed for removing flash and other imperfections in plastic models by scraping away unwanted plastic with the dull Zirconia ZrO2 blade.
Just run the edge of the blade along the plastic and watch as the plastic shaves off easily, leaving an even and clean finish.
A hard-wearing, tough plastic cube containing 20 grey 12mm dice with skull icons in place of the 1, this dice cube features an embossed skull lid (you can never have too many skulls, after all) and is stackable – create your very own multicoloured henge of dice!
Attaches to X4 microphones for optimal wind noise reduction
Includes six foam wind muffs to effectively minimize wind interference
Acoustically transparent design preserves audio quality
Remains hidden in 360° shots for seamless recording
Prevents audio distortion caused by wind and external noise
CompatibilityX4
Unmatched Optics: Each of the Freewell 4K Series optics is handcrafted precisely compatible to be used with DJI FPV Racing Drone
GimbalSafe: Freewell GimbalSafe technology ensures each filter frame goes through a rigorous lightweight test putting no negative effect on your drone gimbal.
Coating: Dustproof, Scratch-resistant, Oilproof, Color Neutral coating makes sure you get the best possible image while shooting outdoor.
Storage Protection: Each filter comes with a robust magnetic filter case.
Product Description
• Optical Glass: 16Layers premium multicoated optical glass Scratch-resistant, Dustproof, Oilproof
• Construction: Gimbal Safe aircraft grade super lightweight CNC aluminum construction frame
• Installation: Magnetic Quick-Swap
• Made to be used with DJI Action 2 Camera
This small brush (S Layer) - perfect for layering - is hand made, with pure sable bristles in a fine point meaning exceptional control - sometimes the tiniest details make a huge difference, and this brush has been designed to help you nail the feeling of a great miniature painted well.
What is the prepareme® Crank Flashlight (2 LED)
Always have light wherever you go! Re-chargeable by pumping the arm. No batteries needed. Compact & Convenient.
TO USE
Pull downon button to release the arm. Slide up to lock position when done pumping.
TURN ON
Swith button to ON position.
TO CHARGE
Pump arm several times to charge the light.
What are the prepareme® Reusable Handwarmers
Works up to an hour; depending on the outdoor temperature.
WARNING: Do not pick up the hand warmers with bare hands after boiling. Do not fully bend or crack the metal chip. Not Microwavable. Do not puncture. Keep out of reach of children.
ACTIVATION
Grasp the metal plate between two fingers and slightly bend repeatedly back and forth.
WARMTH
The gel inside will become crystallized and warm.
REUSE
Boil the hand warmer in water for about 10 minuets until the crystals in the hand warmer go back to a liquid state.
Always wear a lanyard with the LifThor to take off the weight from your arms when flying - for a safer and more comfortable flying experience.
Product Description
Always wear a lanyard with the LifThor to take off the weight from your arms when flying - for a safer and more comfortable flying experience.
Our own Lanyard with the superthin and superstrong nylon end fitting doesn't cover the DJI Mavic Pro remote control LCD screen at all as a normal lanyard would. SAFE FLYING!
These rechargeable, nickel-metal hydride Jupio Rechargeable AAA Batteries 1000mAh, 4 pack batteries will power your device reliably for a long time with its 1.2 v battery voltage. Each pack contains 4 batteries.
