The Blackvue Tamper-Proof Cases are designed to prevent access to critical components of the dashcam. All models block access to the microSD card slot and the power and video cable connectors on the front camera. The Tamper-Proof Cases for X Series models also allow to lock the angle of the front camera.
BTC-2B:
¥ Vertical windshield type, suitable for trucks, buses, vans, etc
¥ Windshield angle of 60¡Ð90¡ with the horizontal.
Compatible Models:
¥ DR900S-1CH AND DR900S-2CH
¥ DR750S-1CH AND DR750S-2CH
¥ DR650S-1CH AND DR650S-2CH AND DR650S-2CH IR AND DR650S-2CH TRUCK
¥ DR650GW-1CH AND DR650GW-2CH AND DR650GW-2CH TRUCK
¥ DR550GW-1CH AND DR550GW-2CH.
Want to hard-wire your BlackVue DR590X, 750X or 900X series dash cam directly to your car's electrical system?This direct-wire power wire harness works with all "X" Series (590X, 750X, 900X) BlackVue dash cams to integrate quickly and easily with your vehicle's fuse box.Ditch the cigarette lighter outlet power adapter! This part connects directly to the fuse box so that your dash cam will remain on at all times, as long as your vehicle battery is above the safety threshold (e.g. 12.0v) that you specify in your camera configuration during setup.Add a set of "plug and play" fuse taps or our universal fuse tap bundle to your cart to make installing the direct-wire cable more safe and even quicker and easier than ever!Specifications
Adapts 12v vehicle electrical system to most BlackVue dash cams
Fuse Box Connections: constant power, switched power, ground
Utilizes the new low-voltage protection feature that is now built-in to X-Series BlackVue dash cams
Length: 4.5m / 14.7'
Part Number: CH-3P1
Compatible with the following BlackVue dashcams:
DR590X-1CH
DR590X-2CH
DR590X-2CH-IR
DR750X-1CH
DR750X-2CH
DR750X-2CH-IR
DR750X-2CH-Truck
DR900X-1CH
DR900X-2CH
DR900X-2CH-IR
The External GPS Receiver adds speed and location data to your videos.
Speed: speed dataÐin Km/h or MphÐwill be overlaid in the video (can be turned off in the dashcamÕs settings).
Location: you can visualize the location of your vehicle in the BlackVue ViewerÕs Map during video playback.
The BlackVue microSD cards are optimized to work with all BlackVue dashcams.
The 128GB is compatible with all of the following dashcams:
DR900S - 1CH / 2H / 2CH IR
DR900X - 1CH / 2H / 2CH IR
DR750S - 1CH / 2CH / 2CH IR
DR750X - 1CH / 2CH / 2CH IR
DR750X TRUCK - 1CH / 2CH / 2CH IR
DR590W - 1CH / 2CH / 2CH IR
DR590X - 1CH / 2CH / 2CH IR
DR590 - 1CH / 2CH / 2CH IR
Please note regarding compatibility with older BlackVue dashcam models: although it may seem to work, we cannot fully guarantee compatibility and performance with older models.
The BlackVue microSD cards are optimized to work with all BlackVue dashcams.
The 128GB is compatible with all of the following dashcams:
DR900S - 1CH / 2H / 2CH IR
DR900X - 1CH / 2H / 2CH IR
DR750S - 1CH / 2CH / 2CH IR
DR750X - 1CH / 2CH / 2CH IR
DR750X TRUCK - 1CH / 2CH / 2CH IR
DR590W - 1CH / 2CH / 2CH IR
DR590X - 1CH / 2CH / 2CH IR
DR590 - 1CH / 2CH / 2CH IR
Please note regarding compatibility with older BlackVue dashcam models: although it may seem to work, we cannot fully guarantee compatibility and performance with older models.
The BlackVue microSD cards are optimized to work with all BlackVue dashcams.
The 128GB is compatible with all of the following dashcams:
DR900S - 1CH / 2H / 2CH IR
DR900X - 1CH / 2H / 2CH IR
DR750S - 1CH / 2CH / 2CH IR
DR750X - 1CH / 2CH / 2CH IR
DR750X TRUCK - 1CH / 2CH / 2CH IR
DR590W - 1CH / 2CH / 2CH IR
DR590X - 1CH / 2CH / 2CH IR
DR590 - 1CH / 2CH / 2CH IR
Please note regarding compatibility with older BlackVue dashcam models: although it may seem to work, we cannot fully guarantee compatibility and performance with older models.
A119MNTGPSV3 - VIOFO Updated GPS Mount for A119 V3
VIOFO updated GPS Mount for the A119 Version 3 (V3) series dash camera
Syncs date/time and Logs GPS data
Got Two Vehicles? Add a 2nd updated GPS Spare Mount. Pass through mini USB power port for V3 Quick Release GPS Mount.
Not compatible with other version of the A119. Version 3 (A119V3) only.
VIOFO GPS Mount for A129 & A129 Duo & A129 IR
Sync date/time and Log GPS data in your A129 Videos
GPS module is used to include the location data in the recorded videos.
If disabled, your camera will no longer measure your speed and position; nor synchronize the time /date. (Only available when connected with GPS signal)
With the 8.29MP Sony Exmor R image sensor and the Novatek 96685 processor to deliver eye-popping 4K UltraHD (3840*2160) resolution at 30 FPS on the front camera and 1080p Full HD recording at 30 FPS on the rear.
Equipped with a 2.0" high-definition screen. On top of that, the Wi-Fi module allows smartphone screen pairing it with the camera for your iPhone AndroidÊapp on your smartphone and you'll be able to playback and download your footage or access settings within seconds.
Would you like your dash cam to operate not only while you're driving but when you're away too? The A129 PRO has got this sorted with Parking Recording by Motion Detection! Matching the camera with either the Viofo 3-pin Hardwire CableÊ(requires hardwiring) or aÊBack-Up Battery will allow the cam tam to trigger recording on motion detection as well as on impact detection so that protection will be readily available for the vehicle while the owner is away.
KEY FEATURES:
Crystal-clear True 4K video quality is achieved by the advanced 8.29MP Sony Exmor R image sensor on the front unit and the Sony STARVISª IMX291 Sensors on the rear.
Built-in Wi-Fi allows you to view live video, change settings, playback and download videos to your mobile device (within 10-15 meter range around the car).
The built-into-mount GPS receiver logs your vehicleÕs location, speed and current time so you can later visualize its position on the map.
Protect yourself from hit-and-run accidents while your car is parked with motion-activated Parking Mode (requires a Power Management Device).
Range of optional accessories from Viofo:ÊHardwire CablesÊfor a clean installation,ÊBattery PacksÊfor parking recording,ÊPolarizing FilterÊandÊBluetooth Emergency Button.
Low-profile and discreet design.
Up to 256GB memory card support.
1-year manufacturer warranty.
**We reccommend SanDisk Extreme Pro MicroSD V30 cards 128gb and above**
The A129 PRO Single is one of the highly-anticipated 4K dash cams of the year. Keeping the same sleek design of its predecessor, the Viofo A129 Single, and now with the 8.29MP Sony Exmor R image sensor and the Novatek 96685 processor to deliver eye-popping 4K UltraHD (3840*2160) resolution at 30 FPS.
Following the success of the A129, the PRO version is equipped with a 2.0" high-definition screen, a user-friendly button interface and an external GPS receiver that is built into the adhesive mount (included in the package). On top of that, the Wi-Fi module allows you to leverage your smartphone screen by pairing it with the camera. Just install the iOS for your iPhone or the Android app on your smartphone and you'll be able to playback and download your footage or access settings within seconds.
Would you like your dash cam to operate not only while you're driving but when you're away too? The A129 PRO has got this sorted too with Parking Recording by Motion Detection! Matching the camera with either the Viofo 3-pin Hardwire Cable (requires hardwiring) or a Back-Up Battery will allow the cam tam to trigger recording on motion detection as well as on impact detection so that protection will be readily available for the vehicle while the owner is away.
KEY FEATURES
Crystal-clear video quality is achieved by the advanced 8.29MP Sony Exmor R image sensor.
Built-in Wi-Fi allows you to view live video, change settings, playback and download videos to your mobile device (within 10-15 meter range around the car).
The built-into-mount GPS receiver logs your vehicleÕs location, speed and current time so you can later visualize its position on the map.
Protect yourself from hit-and-run accidents while your car is parked with motion-activated Parking Mode (requires a Power Management Device).
Low-profile and discreet design.
Up to 256GB memory card support.
**We reccommend SanDisk Extreme MicroSD V30 cards 128gb and above**
This Viofo CPL filter behaves very much like sunglasses for your eyes on a bright sunny day. It eliminates glare from the dashboard, getting rid of unwanted light reflections.
The filter clips over the lens housing and the lens can be rotated to best suit the camera's mounting position in the vehicle.
This CPL filter is an optional accessory (dash cam is not included) and compatible with the following Viofo models.
A129 Duo/Single
A129 PRO Duo/Single
A129 IR (front cam only)
A119 V3
A119 V2
A119S V2
Please note that it is not compatible with: VIOFO A129 IR (interior-pointing) camera.
Circular-Polarizing Filters (CPL) > Works with VIOFO A118C2 / A119 /A119S / A129 Dash Camera > it could further reduce the reflections from windshield, getting more saturated and beautiful video
Hardwire Kit for Parking Mode
Parking mode provides surveillance on your parked vehicle. When the engine is off, Hardwired Kit is used to provide continuous power and protect your car battery from discharge.
Automatic Parking Mode
With ACC detection, the dash cam will switch to parking mode automatically if the vehicle engine is shut off. The dash cam will switch into normal recording when the vehicle engine is on
Battery Discharge Prevention
HK3 ACC Hardwire kits will provide continuous power to your dashcam in parking mode until your car battery voltage drops to the configured value.
Configurable Voltage Cut-off
VIOFO HK3 ACC Hardwire kits lets you set a voltage cut-off value with 4 options, when the voltage of vehicleÕs battery drops to the cut-off value, HK3 will stop powering your dashcam, thus protecting your battery from discharge
12 / 24V Compatible
HK3 ACC Hardwire kits connects the camera directly to the car, truck, bus, SUVs, or big rig for continuous power, accepts voltage from any type of vehicles runs on 12 Ð 24V.
Compatibility
A119V3 / A129 DUO / A129 DUO IR / A129 PRO DUO
3 Wire ACC Hardwire Kit for A139 3CH/2CH with USB-C
> Parking Mode function will turns on automatically through
detecting ACC signal when the car is turned off
> 4 different adjustable Voltage for battery drain protection
> TYPE-C USB connector
VIOFO MT1 Motorcycle Dash Cam Front and Rear 1080P Dual Channel Waterproof Motorbike Camera 170 Degree Angle, Built-in WiFi, GPS, G-Sensor, Waterproof, Auto On/Off, 32GB SD Card Included
170° Wide Angle Dual Recording, Built-in Sony STARVIS Sensor on dual cameras, MT1 motorcycle dash cam captures every clear moment for front and rear road at 1080P 30pfs even in low light condition , 170° super wide angle lens reduces the blind spots and captures more details, to reserve the real scene.
IP66 Water & Dust Resistant, adopt effective IP66 class protection from water and dust, it still has good performance even in heavy rain and any other hard conditions. All the parts of the motorcycle dashcam and lens are waterproof.
Built in Wi-Fi & GPS, Connect to VIOFO APP via Wi-Fi, easily to view real-time video, check GPS route, download video and change settings on your phone. GPS can log the current speed and location, also automatically correct the time by synchronizing with the satellite. Timestamp can be embedded in the video.
Remote Control & Auto Turn On/Off, the remote control can start manual emergency recording and control Wi-Fi connection, it has a built-in microphone to realizes audio recording. The MT1 power cable has the ACC detection function to automatically start/stop when the engine is on/off, no need to manually open it, convenient and fast.
Perfect Choice for Motorcycle, Clear night vision, special stealth design, emergency recording (G-sensor), loop recording, super capacitor, WDR, support up to 256GB memory card.
This handyÊaccessory for the ViofoÊA129/A129 PROÊdash cams is designed to help the driver to easily tag important videos and lock them from getting overwritten with one simple press on the remote, without needing to take your eyes off the road.
Just mount the Viofo Bluetooth Remote anywhere on your dashboard, pair it with the camera (once only) and use it to activate the "Emergency Recording" functionality to save the current file being recorded from being overwritten. No more searching for the right button to press on your A129 dash camera while your driving!
This remote is compatible with all the A129 dash cam range, including theÊA129,ÊA129 PRO, A129 IR models both Single and Duo editions.
*Please note that it is not compatible with the earlier A119 series or other Viofo cameras.Compatible with A129 series dash camsLock the current image and video clips Free extra battery included
SECURE MOUNTING
Featuring a Patented Dual-Stage Lock that’s quick and easy to attach / detach, but secure enough to lift up to 80 kg (yes, we’ve tested). It’s all in the technique, not in the force.
Product Description
SECURE MOUNTING
Featuring a Patented Dual-Stage Lock that’s quick and easy to attach / detach, but secure enough to lift up to 80 kg (yes, we’ve tested). It’s all in the technique, not in the force.
PROTECTIVE / IMPACT RESISTANT
We would never suggest throwing your Galaxy off a double story building, that’s just silly. But with a tough, polycarbonate core and impact absorbing TPU edge-to-edge outer shell, you can be confident that your Galaxy will be protected in your everyday activities.
SLEEK DESIGN
The slim profile and soft touch material make it perfect for everyday use. Simplicity is key in all of our design, no showboating here.
And yes, it’s compatible with wireless charging.*
Please Note:* Compatibility with third party wireless chargers may vary depending on device and charging model
Secure Quad Lock® interface
Composite construction (TPU / PC)
Microfibre lining
Impact absorbing shell
Compatible with wireless charging
Please Note:* Due to the wrap-around nature of our cases, some glass screen protectors are not compatible** Use of a screen protector in combination with the Poncho may affect touch screen usability*** All Galaxy S21 and S20 cases share the same dimensions for 4G and 5G models
QUAD LOCK OUT FRONT MOUNT V2
Choose between the Quad Lock Out Front Mount or the Quad Lock Out Front Mount PRO.
SECURE MOUNTING
Both mounts come with our patented dual-stage lock, which allows you to ride with confidence knowing that your smartphone will stay secure on your bike, no matter the terrain.
QUICK TO ATTACH / DETACH
Simply twist and lock to view apps as you ride such as Strava, MapMyRide or Apple maps. Detach just as easily so you don't miss a photo opportunity or important call. Remember, it's all in the technique, not the force.
UNRIVALLED DESIGN
Both mounts are designed for aerodynamics. The Out Front Mount PRO features a lower profile and super rigid anodised aluminium mounting arm. The standard Out Front Mount can be reversed to go over the stem of your bike's handlebars.
Add a coloured lever to style your Quad Lock Out Front Mount or Out Front Mount PRO to your bike.
The Quad Lock Handlebar Mounts are the ultimate smartphone mounts for motorcycles and are compatible with all Quad Lock Cases including the Quad Lock Universal Adaptor.
SECURE MOUNTING
Our patented dual-stage lock means you can ride with confidence knowing that your smartphone will stay secure on your bike.
QUICK TO ATTACH / DETACH
Simply twist and lock in one motion to attach your smartphone to your handlebar to view GPS navigation as you ride.
SLEEK DESIGN
Don't compromise on your bike's aesthetic. The sleek design of all Quad Lock mounts seamlessly integrates onto your bike's handlebars. Stylise your mount with a colored lever to match your bike (optional extra).
QUAD LOCK MOTORCYCLE FORK STEM MOUNT
The Quad Lock Fork Stem Mounts are designed for motorcycles that require mounting in the tube of the fork stem.
Both Quad Lock Fork Stem Mounts are compatible with all Quad Lock Cases and the Quad Lock Universal Adaptor.
STRONG & SECURE
The patented dual-stage locking mechanism ensures that your smartphone will stay strong and secure as you ride.
QUICK & EASY TO ATTACH / DETACH
No fumbling with tricky grips. Use one hand to quickly attach and detach your smartphone from either of the Quad Lock Fork Stem Mounts.
OPTIMAL VIEWING ANGLE
Use the provided Allen (Hex) Key to set the optimal height and viewing angle.
Please Note: Case not included but can be purchased as a kit here
Integrate Quad Lock® with your existing motorcycle RAM mount using the Quad Lock® 1” Ball Adaptor Mount.
Product Description
Integrate Quad Lock® with your existing motorcycle RAM mount using the Quad Lock® 1” Ball Adaptor Mount.
SUPER STRONG MOUNTING
The strong, patented dual-stage lock means you can ride with confidence knowing that your phone is secured to your motorbike without the need for cumbersome lanyards, straps, bands or magnets. No matter the terrain.
Use your existing 1” RAM socket arm to securely grip the 1” Rubber Ball Adaptor.
QUICK TO ATTACH / DETACH
No tools needed. The familiar 1” Ball Adaptor makes it quick and easy to install to your existing 1” RAM socket arm at a viewing angle that suits you.
Simply twist and lock to attach your phone. Use the lever and twist to detach.
MINIMALISTIC DESIGN
Reduce the size of your current mount so that your phone sits discreetly on your motorcycle in either portrait or landscape mode.
PLEASE NOTE: Quad Lock Case and 1” Socket Arm Not Included
Compatible with all Quad Lock® Cases and the Universal Adaptor
Compatible with 1" RAM Socket Arm
Glass filled nylon
Stainless steel hardware
