Includes ND 8/16/32 filters that are suitable for capturing sports at noon or in other brightly lit scenarios. By reducing light intake, you can use a lower shutter speed even in bright conditions, enhancing motion blur for a more striking visual effect.   TipsWhen mounting the ND Filter, ensure the orange rubber ring inside is properly fitted into the groove for a secure attachment. IN THE BOX Osmo Nano ND8 Filter × 1Osmo Nano ND16 Filter × 1Osmo Nano ND32 Filter × 1Osmo Nano ND Filter Case × 1

Read more less

ALL THRILLS, NO FRILLS     FULLY EXPERIENCE FLIGHT The adrenaline-pumping DJI Avata 2 delivers an immersive FPV drone experience with improved imaging, safety, and battery life. Amp up the fun when you pair Avata 2 with the DJI Goggles N3 and DJI RC Motion 3.   FEEL EVERY FLIGHT  Effortlessly perform difficult aerial acrobatics with DJI RC Motion 3. New pilots can now perform spectacular flips, drifts, and other captivating manoeuvres.     FLIPPING AWESOMECREATIVE EDGE EASY ACRO Soar, dive, and roll for stunning aerial footage with a single push. Capturing epic FPV footage with DJI RC Motion 3 and Avata 2 is easier than ever. One-Push Flip - 360° front/back flip, adding fresh twists to your footage.One-Push Roll - Roll 360° left/right, turning any shot from meh to magic.One-Push 180° Drift - High-speed lateral drifts to yaw spin 180° past objects and swiftly pull away, achieving dramatic visuals.   ADVANCED MANOEUVRES Fly nimbly through tight spaces with the new DJI FPV Remote Controller 3 in Manual mode to showcase flying prowess [3] and gutsy creativity.   TIGHT SHOTS IN SUPER-WIDE 4K Create breathtaking visuals with the 155° FOV of Avata 2 and its ability to swiftly approach and pull away from subjects. New pilots can quickly master aerobatic shots and capture fast-moving dynamic low-altitude shots that other drones can't.   1/1.3-INCH IMAGE SENSOR The upgraded 1/1.3-inch image sensor expands the captured dynamic range, handling low-light conditions more effectively to capture outstanding footage on every flight. [4]   IMMERSION REIMAGINED 4K/60FPS HDR VIDEOS [7] Unleash your true aerial potential. The 4K/60fps HDR on Avata 2 captures all the awesomeness of high-speed flight. In the goggles, you can adjust the sharpness and noise reduction levels for more finely tuned videos.   ROCKSTEADY Equipped with DJI's latest stabilisation algorithm, Avata 2 captures smooth, steady footage even when flying at high speeds or in windy conditions.   HORIZONSTEADY HorizonSteady handles horizontal rotations up to 360°, ensuring the captured footage remains locked on the horizon even if the drone turns sharply or sways dramatically.   155° ULTRA-WIDE-ANGLE FOV Amplify your vision and increase the immersion of low-altitude, high-speed flights. Avata 2 offers ultra-wide-angle, wide-angle, and normal-angle FOV options giving you the ability to adjust to the scenario.   10-BIT D-LOG M Capture rich detail in highlights and shadows and enhance content post-production opportunities while further streamlining colour-grading.     GOT YOU COVERED COMPREHENSIVE SAFETY The updated integrated propeller guard design of Avata 2 makes it lighter and more agile, enabling it to navigate freely in tight spaces. [4] Releasing the accelerator on RC Motion 3 or pressing the lock button brings the drone to a halt, allowing you to handle unexpected situations calmly. In addition, the automatic Return to Home (RTH) function is initiated when the drone's battery is low or in case of signal loss, adding an extra layer of security. [8]   ADVANCED POSITIONING WITH NEW SENSORS New binocular fisheye sensors enable downward and backward visual positioning during low-altitude and indoor flights, enhancing flight stability and safety.   TURTLE MODE Avata 2 can automatically flip itself back into takeoff position when upside down with Turtle mode enabled, so you can quickly get airborne again.   EXCELLENCE IN EVERYTHING THE SKY'S THE LIMIT WITH LONGER FLIGHT Avata 2 boasts a maximum flight time of 23 minutes [9] and supports PD fast charging, so you can quickly recharge it and take to the skies again. The new DJI Avata 2 Two-Way Charging Hub [3] features a power accumulation function, allowing the transfer of remaining power from multiple batteries to the one with the highest charge level, [10] giving you an "extra battery" in critical moments.   O4 VIDEO TRANSMISSION, ENHANCED PERCEPTION DJI O4 video transmission's enhanced stability lets you fully immerse yourself in each flight and provides greater safety. Its two-transmitter, four-receiver, four-antenna design ensures strong anti-interference performance, and it boasts up to 13 km of maximum video transmission distance, [11] a transmission latency as low as 24 ms, [12]1080p/100fps high-definition image quality, and a maximum transmission bitrate of 60Mbps. [13]   BOUNDLESS PASSION, WIRELESS SHARING Watch the DJI Goggles N3 live feed from Avata 2 on your smart device's DJI Fly App. [14] Connect up to 5 m away. [15]Sharing the excitement of FPV just got easier, and learning how to fly is more accessible than ever.     SAVE MORE, SHARE MORECAPTURE AND EDIT SEAMLESSLY Avata 2 comes equipped with 46GB internal storage, capable of storing approximately 90 minutes of 1080p/60fps video, ensuring you capture the best parts of each flight. With Wi-Fi connectivity for fast file transfer to your phone, post-editing and sharing of your finished work is highly efficient.  ONE-TAP VFX WITH LIGHTCUT The LightCut app, connecting directly to DJI Avata 2 via Wi-Fi, allows you to intelligently add Sky VFX during post based on the flight trajectory captured in your videos, helping you easily create engaging aerial footage. Without the need to download the footage, the app offers editing and, combined with One-Tap Edit, allows you to produce polished content in a snap effortlessly. Sky VFX - After connecting the device and importing the footage, tap Sky VFX to add unique overlays, through-the-air text animations, virtual cockpits, and dashboard effects, enhancing the interactive fun and engagement of your immersive flight footage.One-Tap Edit - With AI's intelligent recognition of video types and themes, you can effortlessly filter through and select highlights with smooth camera work and exquisite composition. Coupled with a vast array of thematic templates, enabling you to produce polished content. The app also boasts intelligent sound effects, colour recovery, one-click addition of device watermarks, and end credits, among other features.Wireless Connection - When Avata 2 is connected wirelessly to LightCut, you can preview the captured footage within the app and edit it without the need to download the footage, saving valuable space on your smartphone. PRODUCT SPECIFICATIONS AIRCRAFT Takeoff Weight: Approx. 377 gDimensions: 185×212×64 mm (L×W×H)Max Ascent Speed: 6 m/s (Normal mode)9 m/s (Sport mode)Max Descent Speed: 6 m/s (Normal mode)9 m/s (Sport mode)Max Horizontal Speed (near sea level, no wind): 8 m/s (Normal mode)16 m/s (Sport mode)27 m/s (Manual mode)** No faster than 19 m/s with the Manual mode in the EU regions. Max Takeoff Altitude: 5000 mMeasured in a windless environment when taking off from an altitude of 5000 m and ascending vertically by 500 m, using Sport mode, and from 100% battery level until 20%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.Max Flight Time: Approx. 23 minsMeasured when flying forward at a speed of 21.6 kph in a windless environment at sea level, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.Max Hovering Time: Approx. 21 minsMeasured when hovering in a windless environment at sea level, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.Max Flight Distance: 13.0 kmMeasured when flying forward at a speed of 43.2 kph in a windless environment at sea level, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.Max Wind Speed Resistance: 10.7 m/s (Level 5)Operating Temperature: -10° to 40° C (14° to 104° F)Global Navigation Satellite System: GPS + Galileo + BeiDouHovering accuracy range: Vertical:±0.1 m (with vision positioning)±0.5 m (with GNSS positioning)Horizontal:±0.3 m (with vision positioning)±1.5 m (with GNSS positioning)Internal Storage: 46 GB   CAMERA Image Sensor: 1/1.3-inch image sensorEffective Pixels: 12 MPLens: FOV: 155°Format Equivalent: 12 mmAperture: f/2.8Focus: 0.6 m to ∞ISO Range: 100-25600 (Auto)100-25600 (Manual)Shutter Speed: Video: 1/8000-1/30 sPhoto: 1/8000-1/50 sMax Image Size: 4000×2256 (16∶9)4000×3000 (4∶3)Still Photography Mode: Single shotPhoto Format: JPEGVideo Resolution: 4K (4∶3): 3840×2880@30/50/60fps4K (16∶9): 3840×2160@30/50/60fps2.7K (4∶3): 2688×2016@30/50/60fps2.7K (16∶9): 2688×1512@30/50/120fps1080p (4∶3): 1440×1080@30/50/120fps1080p (16∶9): 1920×1080@30/50/120fpsVideo Format: MP4 (H.264/H.265)Max Video Bitrate: 130 MbpsSupported File System: exFATColor Mode: StandardD-Log MCamera FOV: Supports normal mode, wide-angle mode, and ultra-wide-angle mode.EIS: Supports RockSteady 3.0+ and HorizonSteadyCan be disabled** When stabilization is turned off, footage captured with the wide-angle view supports offline stabilization Gyroflow.   GIMBAL Stabilization: Single-axis mechanical gimbal (tilt)Mechanical Range: Tilt: -95° to 90°Controllable Range: Tilt: -85° to 80°Max Control Speed (tilt): 100°/sAngular Vibration Range: ±0.01°Electronic Roll Axis: Real-time screen correction is unavailable during recording, but can be applied to the footage recorded on the drone.     SENSING Sensing Type: Downward and backward visual positioningDownward: ToF Effective Measurement Height: 10 mPrecise Hovering Range: 0.3-10 mMeasurement Range: 0.3-20 mFOV: Horizontal 78°, Vertical 78°Backward: Measurement Range: 0.5-20 mFOV: Horizontal 78°, Vertical 78°Operating Environment: Diffuse reflective surfaces with discernible patterns, diffuse reflectivity > 20% (such as concrete pavement)Adequate lighting (lux > 15, normal indoor lighting conditions)     VIDEO TRANSMISSION Video Transmission System: O4Live View Quality: 1080p@30/50/60/100fpsOperating Frequency: 2.400-2.4835 GHz5.170-5.250 GHz*5.725-5.850 GHz** 5.170-5.250 GHz and 5.725-5.850 GHz can be used only in countries and regions where permitted by local laws and regulations.Transmitter Power (EIRP): 2.4 GHz:＜33 dBm (FCC)＜20 dBm (CE/SRRC/MIC)5.1 GHz:< 23 dBm (CE)5.8 GHz:＜33 dBm (FCC)＜30 dBm (SRRC)< 14 dBm (CE)Communication Bandwidth: Max 60 MHzMax Transmission Distance (unobstructed, free of interference): FCC: 13 km (subject to the aircraft's max flight distance)CE: 10 kmSRRC: 10 kmMIC: 10 kmMeasured in an unobstructed outdoor environment free of interference. The above data shows the farthest communication range for one-way, non-return flights under each standard. Always pay attention to RTH reminders on the goggles screen during your flight.Max Transmission Distance (unobstructed, with interference): Strong Interference: Urban landscape, approx. 1.5-4 kmMedium Interference: Suburban landscape, approx. 4-10 kmLow Interference: Suburb/seaside, approx. 10-13 kmData tested under FCC standard in unobstructed environments with typical interference. Used for reference purposes only and provides no guarantee for actual transmission distance.Max Transmission Distance (obstructed, with interference): Low Interference and Obstructed by Buildings: approx. 0-0.5 kmLow Interference and Obstructed by Trees: approx. 0.5-3 kmData tested under FCC standard in environments with typical low interference. Used for reference purposes only and provides no guarantee for actual transmission distance.Max Download Speed: Wi-Fi: 30 MB/s** Measured in a laboratory environment with little interference in countries/regions that support both 2.4 GHz and 5.8 GHz. Download speeds may vary depending on the actual conditions.Max Video Bitrate: 60MbpsAntennas: 4 antennas, 2T4R     WI-FI Protocol: 802.11a/b/g/n/acOperating Frequency: 2.400-2.4835 GHz5.725-5.850 GHzTransmitter Power (EIRP): 2.4 GHz:<20 dBm (FCC／CE／SRRC／MIC)5.8 GHz:<20 dBm (FCC／SRRC)< 14 dBm (CE)     BLUETOOTH Protocol: Bluetooth 5.0Operating Frequency: 2.400-2.4835 GHzTransmitter Power (EIRP): <10 dBm     INTELLIGENT FLIGHT BATTERY Capacity: 2150 mAhWeight: Approx. 145 gStandard Voltage: 14.76 VMax Charging Voltage: 17 VBattery Type: Li-ionEnergy: 31.7 Wh@0.5CCharging Temperature: 5° to 40° C (41° to 104° F)Charging Time: With Charging Hub (60W max charging power):From 0 to 100%: approx. 45 minFrom 10 to 90%: approx. 30 minDirectly Charging the Drone (30 W max charging power):From 0 to 100%: approx. 88 minFrom 10 to 90%: approx. 60 min     CHARGER Recommended Charger: DJI 65W Portable ChargerDJI 65W Car ChargerUSB Power Delivery charger     BATTERY CHARGING HUB Input: 5-20 V, max 3 AOutput (power accumulation): Max 65 WOutput (charging): Max 17 VOutput (USB): 5 V, 2 ACharging Type: Three batteries charged in sequence.Compatibility: DJI Avata 2 Intelligent Flight Battery     STORAGE Recommended microSD Cards: SanDisk Extreme PRO 32GB U3 A1 V30 microSDHCLexar Professional 1066x 64GB U3 A2 V30 microSDXCLexar Professional 1066x 128GB U3 A2 V30 microSDXCLexar Professional 1066x 256GB U3 A2 V30 microSDXCLexar Professional 1066x 512GB U3 A2 V30 microSDXCKingston CANVAS Go! Plus 64GB U3 A2 V30 microSDXCKingston CANVAS Go! Plus 128GB U3 A2 V30 microSDXCKingston CANVAS React Plus 64GB U3 A1 V90 microSDXCKingston CANVAS React Plus 128GB U3 A1 V90 microSDXCKingston CANVAS React Plus 256GB U3 A1 V90 microSDXCSamsung EVO Plus 512GB U3 A2 V30 microSDXC     DJI FPV REMOTE CONTROLLER 3 Max Operating Time: Approx. 10 hoursOperating Temperature: -10° to 40° C (14° to 104° F)Charging Temperature: 0° to 50° C (32° to 122° F)Charging Time: 2 hoursCharging Type: 5 V, 2 ABattery Capacity: 2600 mAhWeight: Approx. 240 gDimensions: 165×119×62 mm (L×W×H)Operating Frequency: 2.400-2.4835 GHzTransmitter Power (EIRP): 2.400 GHz:＜26 dBm (FCC)＜20 dBm (CE/SRRC/MIC) IN THE BOX DJI Avata 2 × 1DJI Avata 2 Intelligent Flight Battery × 3DJI Avata 2 Propellers (Pair) × 2DJI Avata 2 Propeller Screw × 8Screwdriver × 1Lanyard × 1DJI Avata 2 Gimbal Protector × 1Type-C to Type-C PD Cable × 1DJI Goggles N3 × 1DJI RC Motion 3 × 1

Read more less

ALL THRILLS, NO FRILLS     FULLY EXPERIENCE FLIGHT The adrenaline-pumping DJI Avata 2 delivers an immersive FPV drone experience with improved imaging, safety, and battery life. Amp up the fun when you pair Avata 2 with the DJI Goggles N3 and DJI RC Motion 3.   FEEL EVERY FLIGHT  Effortlessly perform difficult aerial acrobatics with DJI RC Motion 3. New pilots can now perform spectacular flips, drifts, and other captivating manoeuvres.     FLIPPING AWESOMECREATIVE EDGE EASY ACRO Soar, dive, and roll for stunning aerial footage with a single push. Capturing epic FPV footage with DJI RC Motion 3 and Avata 2 is easier than ever. One-Push Flip - 360° front/back flip, adding fresh twists to your footage.One-Push Roll - Roll 360° left/right, turning any shot from meh to magic.One-Push 180° Drift - High-speed lateral drifts to yaw spin 180° past objects and swiftly pull away, achieving dramatic visuals.   ADVANCED MANOEUVRES Fly nimbly through tight spaces with the new DJI FPV Remote Controller 3 in Manual mode to showcase flying prowess [3] and gutsy creativity.   TIGHT SHOTS IN SUPER-WIDE 4K Create breathtaking visuals with the 155° FOV of Avata 2 and its ability to swiftly approach and pull away from subjects. New pilots can quickly master aerobatic shots and capture fast-moving dynamic low-altitude shots that other drones can't.   1/1.3-INCH IMAGE SENSOR The upgraded 1/1.3-inch image sensor expands the captured dynamic range, handling low-light conditions more effectively to capture outstanding footage on every flight. [4]   IMMERSION REIMAGINED 4K/60FPS HDR VIDEOS [7] Unleash your true aerial potential. The 4K/60fps HDR on Avata 2 captures all the awesomeness of high-speed flight. In the goggles, you can adjust the sharpness and noise reduction levels for more finely tuned videos.   ROCKSTEADY Equipped with DJI's latest stabilisation algorithm, Avata 2 captures smooth, steady footage even when flying at high speeds or in windy conditions.   HORIZONSTEADY HorizonSteady handles horizontal rotations up to 360°, ensuring the captured footage remains locked on the horizon even if the drone turns sharply or sways dramatically.   155° ULTRA-WIDE-ANGLE FOV Amplify your vision and increase the immersion of low-altitude, high-speed flights. Avata 2 offers ultra-wide-angle, wide-angle, and normal-angle FOV options giving you the ability to adjust to the scenario.   10-BIT D-LOG M Capture rich detail in highlights and shadows and enhance content post-production opportunities while further streamlining colour-grading.     GOT YOU COVERED COMPREHENSIVE SAFETY The updated integrated propeller guard design of Avata 2 makes it lighter and more agile, enabling it to navigate freely in tight spaces. [4] Releasing the accelerator on RC Motion 3 or pressing the lock button brings the drone to a halt, allowing you to handle unexpected situations calmly. In addition, the automatic Return to Home (RTH) function is initiated when the drone's battery is low or in case of signal loss, adding an extra layer of security. [8]   ADVANCED POSITIONING WITH NEW SENSORS New binocular fisheye sensors enable downward and backward visual positioning during low-altitude and indoor flights, enhancing flight stability and safety.   TURTLE MODE Avata 2 can automatically flip itself back into takeoff position when upside down with Turtle mode enabled, so you can quickly get airborne again.   EXCELLENCE IN EVERYTHING THE SKY'S THE LIMIT WITH LONGER FLIGHT Avata 2 boasts a maximum flight time of 23 minutes [9] and supports PD fast charging, so you can quickly recharge it and take to the skies again. The new DJI Avata 2 Two-Way Charging Hub [3] features a power accumulation function, allowing the transfer of remaining power from multiple batteries to the one with the highest charge level, [10] giving you an "extra battery" in critical moments.   O4 VIDEO TRANSMISSION, ENHANCED PERCEPTION DJI O4 video transmission's enhanced stability lets you fully immerse yourself in each flight and provides greater safety. Its two-transmitter, four-receiver, four-antenna design ensures strong anti-interference performance, and it boasts up to 13 km of maximum video transmission distance, [11] a transmission latency as low as 24 ms, [12]1080p/100fps high-definition image quality, and a maximum transmission bitrate of 60Mbps. [13]   BOUNDLESS PASSION, WIRELESS SHARING Watch the DJI Goggles N3 live feed from Avata 2 on your smart device's DJI Fly App. [14] Connect up to 5 m away. [15]Sharing the excitement of FPV just got easier, and learning how to fly is more accessible than ever.     SAVE MORE, SHARE MORECAPTURE AND EDIT SEAMLESSLY Avata 2 comes equipped with 46GB internal storage, capable of storing approximately 90 minutes of 1080p/60fps video, ensuring you capture the best parts of each flight. With Wi-Fi connectivity for fast file transfer to your phone, post-editing and sharing of your finished work is highly efficient.  ONE-TAP VFX WITH LIGHTCUT The LightCut app, connecting directly to DJI Avata 2 via Wi-Fi, allows you to intelligently add Sky VFX during post based on the flight trajectory captured in your videos, helping you easily create engaging aerial footage. Without the need to download the footage, the app offers editing and, combined with One-Tap Edit, allows you to produce polished content in a snap effortlessly. Sky VFX - After connecting the device and importing the footage, tap Sky VFX to add unique overlays, through-the-air text animations, virtual cockpits, and dashboard effects, enhancing the interactive fun and engagement of your immersive flight footage.One-Tap Edit - With AI's intelligent recognition of video types and themes, you can effortlessly filter through and select highlights with smooth camera work and exquisite composition. Coupled with a vast array of thematic templates, enabling you to produce polished content. The app also boasts intelligent sound effects, colour recovery, one-click addition of device watermarks, and end credits, among other features.Wireless Connection - When Avata 2 is connected wirelessly to LightCut, you can preview the captured footage within the app and edit it without the need to download the footage, saving valuable space on your smartphone. PRODUCT SPECIFICATIONS AIRCRAFT Takeoff Weight: Approx. 377 gDimensions: 185×212×64 mm (L×W×H)Max Ascent Speed: 6 m/s (Normal mode)9 m/s (Sport mode)Max Descent Speed: 6 m/s (Normal mode)9 m/s (Sport mode)Max Horizontal Speed (near sea level, no wind): 8 m/s (Normal mode)16 m/s (Sport mode)27 m/s (Manual mode)** No faster than 19 m/s with the Manual mode in the EU regions. Max Takeoff Altitude: 5000 mMeasured in a windless environment when taking off from an altitude of 5000 m and ascending vertically by 500 m, using Sport mode, and from 100% battery level until 20%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.Max Flight Time: Approx. 23 minsMeasured when flying forward at a speed of 21.6 kph in a windless environment at sea level, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.Max Hovering Time: Approx. 21 minsMeasured when hovering in a windless environment at sea level, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.Max Flight Distance: 13.0 kmMeasured when flying forward at a speed of 43.2 kph in a windless environment at sea level, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Data is for reference only. Always pay attention to reminders on the goggles' screens during your flight.Max Wind Speed Resistance: 10.7 m/s (Level 5)Operating Temperature: -10° to 40° C (14° to 104° F)Global Navigation Satellite System: GPS + Galileo + BeiDouHovering accuracy range: Vertical:±0.1 m (with vision positioning)±0.5 m (with GNSS positioning)Horizontal:±0.3 m (with vision positioning)±1.5 m (with GNSS positioning)Internal Storage: 46 GB   CAMERA Image Sensor: 1/1.3-inch image sensorEffective Pixels: 12 MPLens: FOV: 155°Format Equivalent: 12 mmAperture: f/2.8Focus: 0.6 m to ∞ISO Range: 100-25600 (Auto)100-25600 (Manual)Shutter Speed: Video: 1/8000-1/30 sPhoto: 1/8000-1/50 sMax Image Size: 4000×2256 (16∶9)4000×3000 (4∶3)Still Photography Mode: Single shotPhoto Format: JPEGVideo Resolution: 4K (4∶3): 3840×2880@30/50/60fps4K (16∶9): 3840×2160@30/50/60fps2.7K (4∶3): 2688×2016@30/50/60fps2.7K (16∶9): 2688×1512@30/50/120fps1080p (4∶3): 1440×1080@30/50/120fps1080p (16∶9): 1920×1080@30/50/120fpsVideo Format: MP4 (H.264/H.265)Max Video Bitrate: 130 MbpsSupported File System: exFATColor Mode: StandardD-Log MCamera FOV: Supports normal mode, wide-angle mode, and ultra-wide-angle mode.EIS: Supports RockSteady 3.0+ and HorizonSteadyCan be disabled** When stabilization is turned off, footage captured with the wide-angle view supports offline stabilization Gyroflow.   GIMBAL Stabilization: Single-axis mechanical gimbal (tilt)Mechanical Range: Tilt: -95° to 90°Controllable Range: Tilt: -85° to 80°Max Control Speed (tilt): 100°/sAngular Vibration Range: ±0.01°Electronic Roll Axis: Real-time screen correction is unavailable during recording, but can be applied to the footage recorded on the drone.     SENSING Sensing Type: Downward and backward visual positioningDownward: ToF Effective Measurement Height: 10 mPrecise Hovering Range: 0.3-10 mMeasurement Range: 0.3-20 mFOV: Horizontal 78°, Vertical 78°Backward: Measurement Range: 0.5-20 mFOV: Horizontal 78°, Vertical 78°Operating Environment: Diffuse reflective surfaces with discernible patterns, diffuse reflectivity > 20% (such as concrete pavement)Adequate lighting (lux > 15, normal indoor lighting conditions)     VIDEO TRANSMISSION Video Transmission System: O4Live View Quality: 1080p@30/50/60/100fpsOperating Frequency: 2.400-2.4835 GHz5.170-5.250 GHz*5.725-5.850 GHz** 5.170-5.250 GHz and 5.725-5.850 GHz can be used only in countries and regions where permitted by local laws and regulations.Transmitter Power (EIRP): 2.4 GHz:＜33 dBm (FCC)＜20 dBm (CE/SRRC/MIC)5.1 GHz:< 23 dBm (CE)5.8 GHz:＜33 dBm (FCC)＜30 dBm (SRRC)< 14 dBm (CE)Communication Bandwidth: Max 60 MHzMax Transmission Distance (unobstructed, free of interference): FCC: 13 km (subject to the aircraft's max flight distance)CE: 10 kmSRRC: 10 kmMIC: 10 kmMeasured in an unobstructed outdoor environment free of interference. The above data shows the farthest communication range for one-way, non-return flights under each standard. Always pay attention to RTH reminders on the goggles screen during your flight.Max Transmission Distance (unobstructed, with interference): Strong Interference: Urban landscape, approx. 1.5-4 kmMedium Interference: Suburban landscape, approx. 4-10 kmLow Interference: Suburb/seaside, approx. 10-13 kmData tested under FCC standard in unobstructed environments with typical interference. Used for reference purposes only and provides no guarantee for actual transmission distance.Max Transmission Distance (obstructed, with interference): Low Interference and Obstructed by Buildings: approx. 0-0.5 kmLow Interference and Obstructed by Trees: approx. 0.5-3 kmData tested under FCC standard in environments with typical low interference. Used for reference purposes only and provides no guarantee for actual transmission distance.Max Download Speed: Wi-Fi: 30 MB/s** Measured in a laboratory environment with little interference in countries/regions that support both 2.4 GHz and 5.8 GHz. Download speeds may vary depending on the actual conditions.Max Video Bitrate: 60MbpsAntennas: 4 antennas, 2T4R     WI-FI Protocol: 802.11a/b/g/n/acOperating Frequency: 2.400-2.4835 GHz5.725-5.850 GHzTransmitter Power (EIRP): 2.4 GHz:<20 dBm (FCC／CE／SRRC／MIC)5.8 GHz:<20 dBm (FCC／SRRC)< 14 dBm (CE)     BLUETOOTH Protocol: Bluetooth 5.0Operating Frequency: 2.400-2.4835 GHzTransmitter Power (EIRP): <10 dBm     INTELLIGENT FLIGHT BATTERY Capacity: 2150 mAhWeight: Approx. 145 gStandard Voltage: 14.76 VMax Charging Voltage: 17 VBattery Type: Li-ionEnergy: 31.7 Wh@0.5CCharging Temperature: 5° to 40° C (41° to 104° F)Charging Time: With Charging Hub (60W max charging power):From 0 to 100%: approx. 45 minFrom 10 to 90%: approx. 30 minDirectly Charging the Drone (30 W max charging power):From 0 to 100%: approx. 88 minFrom 10 to 90%: approx. 60 min     CHARGER Recommended Charger: DJI 65W Portable ChargerDJI 65W Car ChargerUSB Power Delivery charger     BATTERY CHARGING HUB Input: 5-20 V, max 3 AOutput (power accumulation): Max 65 WOutput (charging): Max 17 VOutput (USB): 5 V, 2 ACharging Type: Three batteries charged in sequence.Compatibility: DJI Avata 2 Intelligent Flight Battery     STORAGE Recommended microSD Cards: SanDisk Extreme PRO 32GB U3 A1 V30 microSDHCLexar Professional 1066x 64GB U3 A2 V30 microSDXCLexar Professional 1066x 128GB U3 A2 V30 microSDXCLexar Professional 1066x 256GB U3 A2 V30 microSDXCLexar Professional 1066x 512GB U3 A2 V30 microSDXCKingston CANVAS Go! Plus 64GB U3 A2 V30 microSDXCKingston CANVAS Go! Plus 128GB U3 A2 V30 microSDXCKingston CANVAS React Plus 64GB U3 A1 V90 microSDXCKingston CANVAS React Plus 128GB U3 A1 V90 microSDXCKingston CANVAS React Plus 256GB U3 A1 V90 microSDXCSamsung EVO Plus 512GB U3 A2 V30 microSDXC     DJI FPV REMOTE CONTROLLER 3 Max Operating Time: Approx. 10 hoursOperating Temperature: -10° to 40° C (14° to 104° F)Charging Temperature: 0° to 50° C (32° to 122° F)Charging Time: 2 hoursCharging Type: 5 V, 2 ABattery Capacity: 2600 mAhWeight: Approx. 240 gDimensions: 165×119×62 mm (L×W×H)Operating Frequency: 2.400-2.4835 GHzTransmitter Power (EIRP): 2.400 GHz:＜26 dBm (FCC)＜20 dBm (CE/SRRC/MIC) IN THE BOX DJI Avata 2 × 1DJI Avata 2 Intelligent Flight Battery × 1DJI Avata 2 Propellers (Pair) × 2DJI Avata 2 Propeller Screw × 8Screwdriver × 1Lanyard × 1DJI Avata 2 Gimbal Protector × 1Type-C to Type-C PD Cable × 1DJI Goggles N3 × 1DJI RC Motion 3 × 1

Read more less

The quick-release locking clip lets you wear the Osmo Action camera on your hand or wrist to take immersive POV shots or swiftly store the camera. The ball joint at the bottom of the locking clip can rotate 360° and tilt, allowing you to adjust the shooting angle and even get selfies during cycling. The hook-and-loop design allows you to adjust the size to fit your palm or wrist at any time for comfortable wearing. Use scenarios: Activities when your hands are occupied, such as swimming, surfing, water activities, rock climbing, skydiving etc.   CompatibilityOsmo 360Osmo NanoOsmo Action 6Osmo Action 5 ProOsmo Action 4Osmo Action 3 IN THE BOX Osmo Action 360° Wrist Strap × 1

Read more less

NOTE: FERNTECH AIM FOR AN AVERAGE TURNAROUND TIME ON CARE REFRESH CLAIMS OF 10 WORKING DAYS PLUS SHIPPING TIME, ONCE YOUR CLAIM HAS BEEN RECEIVED.CARE REFRESH IS A NON-REFUNDABLE AND NON-RETURNABLE ITEM, ONCE CODES HAVE BEEN SUPPLIED THEY CAN NOT BE RETURNED.   FEATURES Provides two replacement units for an additional charge as per the table below. The Care Refresh 1-year Plan lasts for one year from the date it is bound to your product, and covers for accidents such as water damage, natural wear, or cracking and deformation, letting you fly with peace of mind.   DJI Care Refresh 1-Year Plan ReplacementService Number of Replacements 2 Replacement Fee $120.00 Extended Warranty Period Official warranty is provided during the validity period Support Renewal? Renew 1-Year Plan up to twice   Please Note: DJI Care Refresh can be bound to your DJI product when it meets one of the following criteria: Brand new and un-activated product. Handheld device activated within the last 30 days. *If your device has been activated for over 30 days, follow the instructional guide linked below to verify your device is in good working order and still eligible for DJI Care Refresh. Video Verification Guide Each time you request a replacement, you’ll receive a replacement unit that is new or equivalent to new in performance and reliability. If you have a DJI Care Refresh activation code, click here to bind it to your device.     WATER DAMAGE COVERAGE We'll replace your device if an accident occurs, even if it's damaged by water.    FOUR REPLACEMENTS, TOTAL PEACE OF MIND For an additional charge, DJI Care Refresh offers up to four replacement units within two years and covers accidents such as water damage, natural wear, or cracking and deformation. These replacement units will be new or equivalent to new in performance and reliability.     DJI CARE REFRESH REPAIR PROCESS Ferntech will handle the entire DJI Care Refresh replacement process, which is as follows: Request a Care Refresh replacement via our online Service Request Form Delivery of damaged item* – please contact our helpful team at info@ferntech.co.nz and they will provide details on how to get your product to us. Product assessment by Ferntech team – upon completion, we will select the cheapest option to either have your product repaired or replaced under your DJI Care Refresh policy. Please advise if you would like to have your product replaced even if a repair is cheaper. *We require your product to complete the DJI Care Refresh process.   Please Note: DJI Care Refresh covers return shipping fees back to your address. DJI Care Refresh and the corresponding product must be purchased from New Zealand. DJI Care Refresh only supports devices purchased from official or authorised channels. If you want to purchase DJI Care Refresh for a device that has been activated for over 30 days, follow this Video Verification Guide.

Read more less

NOTE: FERNTECH AIM FOR AN AVERAGE TURNAROUND TIME ON CARE REFRESH CLAIMS OF 10 WORKING DAYS PLUS SHIPPING TIME, ONCE YOUR CLAIM HAS BEEN RECEIVED.CARE REFRESH IS A NON-REFUNDABLE AND NON-RETURNABLE ITEM, ONCE CODES HAVE BEEN SUPPLIED THEY CAN NOT BE RETURNED.   FEATURES Provides four replacement units for an additional charge as per the table below. The Care Refresh 2-year Plan lasts for two years from the date it is bound to your product, and covers for accidents such as water damage, natural wear, or cracking and deformation, letting you fly with peace of mind.   DJI Care Refresh 2-Year Plan ReplacementService Number of Replacements 4 Replacement Fee $120.00 Extended Warranty Period Official warranty is provided during the validity period Support Renewal? Renew 1-Year Plan once   Please Note: DJI Care Refresh can be bound to your DJI product when it meets one of the following criteria: Brand new and un-activated product. Handheld device activated within the last 30 days. *If your device has been activated for over 30 days, follow the instructional guide linked below to verify your device is in good working order and still eligible for DJI Care Refresh. Video Verification Guide Each time you request a replacement, you’ll receive a replacement unit that is new or equivalent to new in performance and reliability. If you have a DJI Care Refresh activation code, click here to bind it to your device.     WATER DAMAGE COVERAGE We'll replace your device if an accident occurs, even if it's damaged by water.    FOUR REPLACEMENTS, TOTAL PEACE OF MIND For an additional charge, DJI Care Refresh offers up to four replacement units within two years and covers accidents such as water damage, natural wear, or cracking and deformation. These replacement units will be new or equivalent to new in performance and reliability.     DJI CARE REFRESH REPAIR PROCESS Ferntech will handle the entire DJI Care Refresh replacement process, which is as follows: Request a Care Refresh replacement via our online Service Request Form Delivery of damaged item* – please contact our helpful team at info@ferntech.co.nz and they will provide details on how to get your product to us. Product assessment by Ferntech team – upon completion, we will select the cheapest option to either have your product repaired or replaced under your DJI Care Refresh policy. Please advise if you would like to have your product replaced even if a repair is cheaper. *We require your product to complete the DJI Care Refresh process.   Please Note: DJI Care Refresh covers return shipping fees back to your address. DJI Care Refresh and the corresponding product must be purchased from New Zealand. DJI Care Refresh only supports devices purchased from official or authorised channels. If you want to purchase DJI Care Refresh for a device that has been activated for over 30 days, follow this Video Verification Guide.

Read more less

Provide efficient and stable propulsion for Neo 2.   Tips1. Mount the marked propellers onto the motors of the marked frame arms and the unmarked propellers onto the motors of the unmarked frame arms.2. Use the screwdriver provided in the aircraft package to remove and install the screws. Unsuitable screwdrivers may damage the screws.3. Use the new screws provided with the propellers when installing. Do not reuse the screws.   CompatibilityDJI Neo 2 IN THE BOX DJI Neo 2 Propellers (Pair) × 2M1.2×3.6mm Screw × 8

Read more less

The propeller guards clip onto the propellers, enclosing them to prevent contact with external objects, providing comprehensive safety during flight.   TipsRefer to the user manual for proper installation and removal of the propeller guards. Avoid forceful disassembly.   CompatibilityDJI Neo 2

Read more less

With up to 19 minutes of flight time*, Neo 2 can perform over 20 excursions** to and from your palm in succession, documenting life's little moments with its sleek design and reliable flight duration.   Tips * Measured when flying forward at a speed of 4 m/s in a windless environment 20 m above sea level, without DJI Neo 2 Digital Transceiver, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version.** Measured after DJI Neo 2 is activated, with a fully charged battery and default settings, and using Circle, Rocket, and Dronie modes, and is for reference only.   CompatibilityDJI Neo 2

Read more less

It can store and charge batteries. When used with the DJI 65W Portable Charger, it can fully charge three Intelligent Flight Batteries simultaneously* in just 68 minutes**. With at least one battery stored, it can serve as a power bank, using the remaining battery power to charge devices such as goggles or smartphones.   Tips* The number of batteries that can be charged simultaneously depends on the power of the charger used. Using a charger rated above 45 W allows you to charge three batteries at the same time. Using a charger rated between 30 W and 45 W allows you to charge only two batteries simultaneously. Using a charger below 30 W will charge the batteries sequentially, from the highest remaining charge to the lowest. Refer to the charging protocols supported by the charger.** Charging time is measured in a test environment with a temperature of 25° C (77° F). Actual charging time may increase due to higher ambient temperatures or variations in mains voltage between regions.   CompatibilityDJI Neo 2

Read more less

NOTE: FERNTECH AIM FOR AN AVERAGE TURNAROUND TIME ON CARE REFRESH CLAIMS OF 10 WORKING DAYS PLUS SHIPPING TIME, ONCE YOUR CLAIM HAS BEEN RECEIVED.CARE REFRESH IS A NON-REFUNDABLE AND NON-RETURNABLE ITEM, ONCE CODES HAVE BEEN SUPPLIED THEY CAN NOT BE RETURNED.   FEATURES Provides two replacement units for an additional charge as per the table below. The Care Refresh 1-year Plan lasts for one year from the date it is bound to your product, and covers for accidents such as water damage or collisions, letting you fly with peace of mind.   DJI Care Refresh 1-Year Plan ReplacementService Number of Replacements 2 Number of Flyaway Replacements 1 Replacement Fee $110.00 NZD Flyaway Replacement Fee $169.00 AUD Extended Warranty Period Official warranty is provided during the validity period Support Renewal? Not Available   Please Note: DJI Care Refresh can be bound to your DJI product when it meets one of the following criteria: Brand new and un-activated product. Aircraft or gimbal activated within the last 48 hours. Handheld device activated within the last 30 days. *If your craft has been activated for over 48 hours, follow the instructional guide linked below to verify your craft is in good working order and still eligible for DJI Care Refresh. Video Verification Guide Each time you request a replacement, you’ll receive a replacement unit that is new or equivalent to new in performance and reliability. If you have a DJI Care Refresh activation code, click here to bind it to your aircraft.     WATER DAMAGE COVERAGE We'll replace your aircraft if an accident occurs, even if it's damaged by water.    TWO REPLACEMENTS, TOTAL PEACE OF MIND For an additional charge, DJI Care Refresh offers up to two replacement units within one year and covers accidents such as water damage, crashes and collisions. These replacement units will be new or equivalent to new in performance and reliability.     DJI CARE REFRESH REPAIR PROCESS Ferntech will handle the entire DJI Care Refresh replacement process, which is as follows: Request a Care Refresh replacement via our online Service Request Form Delivery of damaged item* – please contact our helpful team at info@ferntech.co.nz and they will provide details on how to get your product to us. Product assessment by Ferntech team – upon completion, we will select the cheapest option to either have your product repaired or replaced under your DJI Care Refresh policy. Please advise if you would like to have your product replaced even if a repair is cheaper. *We require your product to complete the DJI Care Refresh process.   Please Note: DJI Care Refresh covers return shipping fees back to your address. DJI Care Refresh and the corresponding product must be purchased from New Zealand. DJI Care Refresh only supports aircraft purchased from official or authorised channels. Please find detailed terms and conditions under the warranty tab above. If you want to purchase DJI Care Refresh for an aircraft that has been activated for over 48 hours, follow this Video Verification Guide.     DJI FLYAWAY COVERAGE (DRONE NOT RECOVERED) Care Refresh offers 1x Flyaway Cover if your DJI Neo 2 is not recovered. To have Flyaway Cover active you need to bind your craft and remote controller to your DJI account by following this video. For any Flyaway case, you will need to lodge a Flyaway report through the DJI Fly application and then contact us

Read more less

DJI Neo 2 is DJI’s most compact drone [1] equipped with omnidirectional obstacle sensing [2] and features such as gesture control [3], SelfieShot, and ActiveTrack [4] for more creative ways to fly. Even beginners can get started effortlessly. Think of it as your personal follow-me camera drone, always ready to capture your most exciting moments.   MASTER FLIGHT WITH EASE DJI Neo 2 features an onboard display for intuitive shooting mode selection. To launch, point it at yourself and press the takeoff button with one hand to take off directly from your palm [5], then perform automatic camera movements. The new Return-to-Palm feature [3] allows Neo 2 to precisely locate your palm, return safely, and land steadily, making flights easier than ever.    MORE WAYS TO CONTROL, MORE FUN Neo 2 can follow you effortlessly even without a remote controller, ensuring every exciting moment is captured. Pair it with DJI RC-N3 or RC 2 remote controller for easy-to-start aerial flights. Put on DJI goggles and use the motion controller for immersive FPV flights [8]. The fun never stops! Gesture Control [3]Easily adjust Neo 2’s direction and proximity with one or both hands [3]. Point your palm toward the drone to guide it up, down, or side to side, or use both palms for precise control over proximity. No remote controller is needed for camera angle adjustment. Voice Control via Mobile [9][10]Neo 2 supports voice control [9][10], so you can send flying commands using your smartphone or Bluetooth earphones [11] with complete freedom, whether on a run or cycling. When connected to your phone, it can capture audio and intelligently reduce noise, automatically filtering out propeller noise. This feature enables you to record content independently on your own. Mobile App Control [10]Control Neo 2 with virtual joysticks on the DJI Fly app interface and quickly delve into the joy of flying with no need for a separate purchase of a remote controller. RC Control [12]When paired with DJI RC-N3 remote controller, Neo 2 can achieve a maximum video transmission distance of 10 km [13]. Flexibly operate the camera using traditional RC control sticks when you need to capture professional-level shots. Motion Control [12]When paired with the motion controller and goggles, Neo 2 supports motion control, Easy ACRO, offering an immersive FPV experience.   SMART CAPTURE FOR SHARP RESULTS DJI Neo 2 supports ActiveTrack [4] and SelfieShot, automatically framing subjects for smooth, hands-free shooting from start to finish. Multiple intelligent shooting modes unlock fresh perspectives and spark creativity in seconds. Combined with 4K video recording [7], Neo 2 delivers crisp, detailed, cinematic-quality footage.   FASTER, SMOOTHER TRACKING WITH ACTIVETRACK [4] With enhanced tracking performance, Neo 2 enables smooth and stable tracking for running, cycling, and more. In open areas, it can track at speeds of up to 12 m/s [14], offering faster response and improved stability. Faster Tracking SpeedWith a maximum tracking speed of 12 m/s [14], Neo 2 smoothly follows you even during running or cycling. Added omnidirectional obstacle sensing [2] ensures safer tracking from the front and sides, allowing you to capture fast-motion moments with ease.12 m/s [14] Maximum tracking speed More Tracking DirectionsEight-direction tracking (forward, backward, left, right, and four diagonals) enables smoother, more natural follow shots and expands creative possibilities. In complex environments, the drone can switch to rear tracking mode, steadily keeping the subject in focus and enabling creative freedom with confidence.   EASY MOMENT CAPTURE WITH SELFIESHOT Capture solo or group moments hands-free with SelfieShot, which lets you effortlessly switch between waist-up, full-body, and long shots without a tripod or any extra assistance. Whether it’s birthday parties, weekend picnics, or family outings, Neo 2 automatically composes every scene and maneuvers the camera as needed to capture your cherished moments with just a tap.   4K HIGH-QUALITY IMAGING [7] Neo 2 features a 12MP, 1/2-inch CMOS sensor with an f/2.2 aperture and high-performance image processor for clearer, low-noise footage. Shoot in 4K/60fps video, 4K/100fps slow motion [15], and 2.7K vertical video, all stabilized by a 2-axis gimbal. Stunning Footage Neo 2 captures impressive footage with true-to-life image quality. 4K Video [7]Neo 2 records 4K/60fps video and 4K/100fps slow-motion [15], delivering smooth and clear results. Portrait OptimizationFeaturing DJI’s portrait optimization technology, Neo 2 enhances portraits’ brightness, contrast, and skin tones, showcasing naturally radiant skin with vivid, lifelike expressions. 2.7K Vertical ShootingNeo 2 supports 2.7K vertical video recording, ideal for social media sharing. Enhanced StabilizationThe 2-axis gimbal works with Electronic Image Stabilization (EIS) [16] to deliver smooth, stabilized footage in any scenario.   SMART MODES, STUNNING SHOTS Neo 2 supports intelligent shooting modes such as Dolly Zoom, QuickShots, and MasterShots, offering diverse perspectives and making standout footage simple to create.    DUAL PROTECTION FOR SAFE FLIGHT Omnidirectional obstacle sensing [2] and full‑coverage propeller guards deliver dual protection for worry‑free flights. Capture life’s moments effortlessly while enjoying the freedom of flight.   COMPLETE PROTECTION, EASY FOR BEGINNERS The omnidirectional monocular vision system, combined with forward-facing LiDAR and a downward infrared sensing system, detects obstacles in real time for safe, confident flying. The integrated propeller guard design provides all-around protection, giving beginners peace of mind when operating the drone. Omnidirectional Obstacle Sensing [2]With the new omnidirectional obstacle sensing feature [2], Neo 2 can detect and avoid obstacles when tracking from the front or sides, so even beginners can operate the drone with ease, stability, and confidence. Versatile Flight [6]Neo 2 supports versatile flight [6], with enhanced hovering and positioning capabilities over Neo, making it easier to navigate challenging environments like indoors, near buildings, over water, or on snow. Full-Coverage Propeller GuardsA lightweight body paired with an integrated propeller guard design makes flying and carrying safer and more agile, so every journey is secure and worry-free.   CREATE WITH EASE AND EFFICIENCY Internal Storage49GB internal storage supports long 4K video recording [7], allowing uninterrupted content capture.  Power ReplenishmentConnect the drone directly to a power source using a USB-C data cable for convenient charging. Neo 2’s Two-Way Charging Hub can charge three batteries simultaneously [17], increasing both charging speed and efficiency. QuickTransferWith file transfer speeds up to 80 MB/s [18], stunning footage is available instantly. Return to Home (RTH) Don’t worry about returning home; when using palm takeoff or mobile app control, Neo 2 will return to the home point after completing its course. When using a remote controller or immersive motion control, Neo 2 supports Return to Home (RTH) and Failsafe RTH, activating obstacle avoidance during the return for enhanced safety and beginner-friendly operation. 19-Min Flight Time [19]With up to 19 minutes of flight time [19], Neo 2 can perform over 20 excursions [20] to and from your palm in succession, documenting life’s little moments with its sleek design and reliable flight duration. Wind ResistanceHover stably in winds up to 10.7 m/s for dependable outdoor capture.       Notes* All videos and images on this page were shot using DJI Neo 2 by professionals in strict compliance with local laws and regulations and have been variously edited in post-production. All videos and images are for reference only. Actual results may vary. Always observe local laws and regulations and ensure the drone has obtained relevant certifications and airspace authorizations before flying.** All data was tested using a production model DJI Neo 2 in a controlled environment. Actual experience may vary depending on the environment, usage, and firmware version.*** All images, videos, and screen display contents about the product itself on this page are for reference only. Actual product effects (including but not limited to appearance, color, size) and screen display contents (including but not limited to backgrounds, UI, and illustrations) may vary. As of November 2025, DJI Neo 2 is the most compact drone in DJI’s lineup to feature omnidirectional obstacle sensing. The omnidirectional vision system only assists flight safety under certain conditions and is not a substitute for your own judgment and control. During a flight, always pay attention to the surrounding environment and the warnings on the DJI Fly app, and be responsible for and maintain control of the drone at all times. The best positioning altitude range of the vision positioning system is 0.5 to 10 m when using the system when GNSS signals are unavailable. The vision positioning performance may decrease when flying beyond this range. Fly with caution. The vision system may not function properly when the drone is flying over water, which may prevent it from actively avoiding water surfaces below when landing. Operators should maintain control of the drone at all times, make operational decisions based on an assessment of the surrounding environment, and avoid relying solely on the vision system. The vision system cannot detect certain objects or surfaces, including large structures with frames and cables (e.g., tower cranes, high‑voltage transmission towers, high‑voltage transmission lines, cable‑stayed bridges); surfaces with no texture or sparse texture; surfaces with repetitive identical patterns or textures (e.g., small tiles of the same color); solid‑colored surfaces (e.g., pure black, pure white, pure red, pure green); strongly reflective or mirrored surfaces (e.g., ice, road signs); water or transparent surfaces; surfaces of moving objects (e.g., above moving crowds, above waving shrubs or grass); moving obstacles (e.g., walking people, moving vehicles); scenes with drastic lighting changes; surfaces that are extremely dark (e.g., less than 1 lux) or extremely bright (e.g., more than 100,000 lux);materials with strong infrared absorption or reflection properties (e.g., mirrors, glass, road signs, asphalt); small obstacles (e.g., fences, branches, power lines); and thin poles or small vertical objects (e.g., utility poles, street lamps). Do not obstruct or interfere with the sensing system under any circumstances. Ensure that all lenses remain clear, free from dirt, smudges, or other contaminants, and are not scratched. Vision system cameras may need to be calibrated after being stored for an extended period. A prompt will appear in the DJI Fly app and calibration will be performed automatically. Do not fly when it is rainy, smoggy, or the visibility is lower than 100 m. Before takeoff, inspect the sensing system’s glass surfaces. Remove any protective film, stickers, or other obstructions. If water droplets, fingerprints, or smudges are present, clean the glass using a lint‑free cloth. Do not use alcohol or other organic solvents. If the glass surface is loose, broken, scratched, or worn, send the drone to an authorized service center for repair. Refer to the product’s user manual for more details. Follow these conditions and precautions when using gesture control: Ensure the surrounding environment is safe when using this feature, and avoid moving people, animals, or vehicles. Do not use gesture control in areas with small or thin objects (e.g., branches or power lines), transparent objects (e.g., glass or water), or solid‑colored surfaces (e.g., white walls). Use this feature only in environments with suitable lighting. Gesture control will not function when ambient light is below 5 lux or above 100,000 lux. Gesture control is supported only in Spotlight or Follow mode, and is not supported when using the remote controller or motion controller. Keep the drone approximately 2 to 5 m from the operator when using this feature. Keep your fingers fully extended when using this feature. Gesture control won’t work with thick gloves or mittens, and the subject should be completely visible in the camera frame without any obstructions. When using Return to Palm, maintain a horizontal distance of 2 to 5 m between the drone and your palm, and a vertical distance of no more than 2 m. If the function does not respond at close range, adjust the drone’s position via gesture control or move yourself to avoid visual blind spots before trying again. To make the drone fly back by raising one arm, keep it within 10 m horizontally from your arm, ensure your arm is fully extended when raised, and do not raise both arms simultaneously, as this will prevent the drone from flying back. It is recommended to use the ActiveTrack feature in open environments. Refer to the user manual for unsupported scenarios or scenarios that may potentially interrupt recording. In complex environments with many obstacles, exercise caution when using Auto mode to ensure flight safety and personal safety. When using palm takeoff and landing, adhere to the following guidelines: operate in a windless environment as much as possible; extend your palm horizontally and keep it still, avoiding finger contact with the propellers to prevent injury; do not attempt to grab the drone while it is flying. Versatile flight refers to DJI Neo 2’s ability to fly both indoors and outdoors, with greatly enhanced performance compared to DJI Neo, especially in conditions like flying over water or snow. Always ensure compliance with local laws and regulations, certification requirements, and airspace authorizations, and make sure you understand and have obtained all necessary permissions before operating the drone. Flight performance may decrease if the drone is flown near solid-colored, transparent, or low-texture surfaces under weak GNSS signal conditions. Always fly with caution in well-lit environments. When flying over water, maintain an altitude of at least 1 m to ensure safety. Refer to the product’s user manual for more details. The maximum resolution in vertical shooting mode is 2.7K. Requires DJI Goggles N3 or DJI Goggles 3, along with DJI RC Motion 3 or DJI FPV Remote Controller 3. When using DJI Neo 2, comply with local laws and regulations and ensure flight safety. Supports English and Mandarin only. Requires connecting DJI Neo 2 to a mobile phone via Wi-Fi. Refer to the DJI Fly app download page for mobile device compatibility and the Bluetooth Device Compatibility List for Bluetooth compatibility. Requires DJI Neo 2 Digital Transceiver, along with the designated remote controller and goggles. These can be obtained by purchasing specific combos or by buying the designated items separately. The 10km video transmission distance can only be achieved with FCC compliance. Measured in an unobstructed outdoor environment free of interference using the remote controller or goggles and showed the farthest communication range for one-way, non-return flights under each standard. The maximum video transmission distance in the actual flight scenarios is limited by the drone’s maximum flight distance. Always pay attention to RTH reminders on the live view during your flight. Maximum speed measured in an open, windless environment, with the drone taking off from an altitude of 0 m and controlled via remote controller. Data are for reference only. 4K/100fps slow-motion video recording is only supported when using the remote controller or motion controller. The stabilization switch (On/Off) is only available when paired with goggles. When stabilization is turned off, footage captured supports offline stabilization with Gyroflow. The number of batteries that can be charged simultaneously depends on the power of the charger used. Using a charger rated above 45 W allows you to charge three batteries at the same time. Using a charger rated between 30 W and 45 W allows you to charge only two batteries simultaneously. Using a charger below 30 W will charge the batteries sequentially, from the highest remaining charge to the lowest. Refer to the charging protocols supported by the charger. Measured in a laboratory environment with little interference in countries/regions that support both 2.4 GHz and 5.8 GHz. Download speeds may vary depending on the actual conditions. Measured when flying forward at a speed of 4 m/s in a windless environment 20 m above sea level, without DJI Neo 2 Digital Transceiver, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version. Measured after DJI Neo 2 is activated, with a fully charged battery and default settings, and using Circle, Rocket, and Dronie modes, and is for reference only. The measured weight excludes DJI Neo 2 Digital Transceiver. The actual product weight may vary due to differences in batch materials and external factors. The actual product weight may vary due to differences in batch materials and external factors. Measured when flying forward at a speed of 2 m/s in a windless environment 20 m above sea level, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version. Measured in an open outdoor environment free of interference. Actual video transmission distance may vary depending on the operating environment and mobile device performance. Refer to the actual experience. PRODUCT SPECIFICATIONS AIRCRAFT Takeoff Weight: 151 g (without DJI Neo 2 Digital Transceiver)160 g (with DJI Neo 2 Digital Transceiver)The actual product weight may vary due to differences in batch materials and external factors.Dimensions: 147×171×41 mm (L×W×H, with propeller guards and without DJI Neo 2 Digital Transceiver)167×171×54 mm (L×W×H, with propeller guards and DJI Neo 2 Digital Transceiver)Max Ascent Speed: 0.5 m/s (Cine mode)3 m/s (Normal mode)5 m/s (Sport Mode)Maximum speed measured in an open, windless environment, with the drone taking off from an altitude of 0 m and controlled via remote controller. Data are for reference only.Max Descent Speed: 0.5 m/s (Cine Mode)3 m/s (Normal Mode)3 m/s (Sport Mode)Maximum speed measured in an open, windless environment, with the drone taking off from an altitude of 0 m and controlled via remote controller. Data are for reference only.Max Horizontal Speed: 8 m/s (Normal Mode)12 m/s (Sport Mode)12 m/s (tracking status)Maximum speed measured in an open, windless environment, with the drone taking off from an altitude of 0 m and controlled via remote controller. Data are for reference only.Max Takeoff Altitude: 2000 mMeasured in a windless environment when taking off from an altitude of 2000 m and ascending vertically by 120 m, using Sport mode, and from 100% battery level until 20%. Data is for reference only. Always pay attention to reminders on the camera view during your flight.Max Flight Time: Approx. 19 minutes (approx. 17 minutes with the propeller guards)*Each battery allows the drone to perform at least 20 palm takeoff and landing for shoots in succession*** Measured when flying forward at a speed of 4 m/s in a windless environment 20 m above sea level, without DJI Neo 2 Digital Transceiver, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version.** Measured after DJI Neo 2 is activated, with a fully charged battery and default settings, and using Circle, Rocket, and Dronie modes, and is for reference only.Max Hovering Time: Approx. 18 minutes (16.5 minutes with the propeller guards)Measured when hovering in a windless environment 20 m above sea level, without DJI Neo 2 Digital Transceiver, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version.Max Flight Distance: 7 kmMeasured when flying forward at a speed of 9 m/s in a windless environment 20 m above sea level, without DJI Neo 2 Digital Transceiver, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version.Max Wind Speed Resistance: 10.7 m/s (Level 5)Operating Temperature: -10° to 40° C (14° to 104° F)Global Navigation Satellite System: GPS + Galileo + BeiDouHovering Accuracy Range: Vertical:±0.1 m (with vision positioning)±0.5 m (with satellite positioning)Horizontal:±0.3 m (with vision positioning)±1.5 m (with satellite positioning)Internal Storage: 49 GBClass: C0 (EU)  CAMERA Image Sensor: 1/2-inch CMOS SensorLens: FOV: 119.8°Format Equivalent: 16.5 mmAperture: f/2.2Focus: 0.7 m to ∞ISO Range: Photo100-3200 (Single Auto)100-12800 (Burst Auto/Timed Auto) 100-12800 (Manual)Video100-12800 (Auto)100-12800 (Manual)Shutter Speed: Video: 1/8000-1/30 sPhoto: 1/8000-1/10 sMax Image Size: 12 MP Photo4000×3000 (4:3)4000×2250 (16:9)Still Photography Modes: Single/Timed ShotSingle Shot: 12 MPTimed Shot: 12 MP, 2/3/5/7/10/15/20/30/60 sPhoto Format: JPEGVideo Resolution: Horizontal Shooting:4K (4:3): 3840×2880@60/50/30fps1080p (4:3): 1440×1080@60/50/30fps4K (16:9): 3840×2160@100*/60/50/30fps1080p (16:9): 1920×1080@100*/60/50/30fpsVertical Shooting:2.7K (9:16): 1512×2688@60/50/30fps* 4K/100fps and 1080p/100fps recording are only supported when using motion control or remote control.Video Format: MP4Max Video Bitrate: 80 MbpsSupported File System: exFATColor Mode: NormalEIS: Supports RockSteady and turning stabilization off.** The stabilization switch (On/Off) is only available when paired with goggles. When stabilization is turned off, footage captured supports offline stabilization with Gyroflow.  GIMBAL Stabilization: 2-axis mechanical gimbal (tilt, roll)Mechanical Range: Tilt: -125° to 105°Roll: -43° to 43°Controllable Range: Tilt: -90° to 70°Max Control Speed (tilt): 100°/sAngular Vibration Range: ±0.01°Image Roll Correction:  Supports correction of footage recorded on the droneLive view correction is unavailable only when using with goggles  SENSING Sensing Type: Omnidirectional monocular vision system, paired with a downward infrared sensing system and forward-facing LiDARForward: Measurement Range: 0.5-10 m Detection Range: 0.5-15 m Effective Sensing Speed: Flight Speed ≤ 8 m/sBackward: Detection Range: 0.5-15 m Effective Sensing Speed: Flight Speed ≤ 8 m/sLateral: Detection Range: 0.5-15 m Effective Sensing Speed: Flight Speed ≤ 8 m/sUpward: Detection Range: 0.5-15 m Effective Sensing Speed: Flight Speed ≤ 3 m/sDownward: Detection Range: 0.5-15 m Effective Sensing Speed: Flight Speed ≤ 3 m/sInfrared Sensor: Forward-Facing LiDAR:Measurement Range: 0.3-8 m (reflectivity > 10%)FOV: Horizontal 60°, Vertical 60°Downward-Facing Infrared Sensor:Measurement Range: 0.3-8 m (reflectivity > 10%)Operating Environment: Forward, Backward, Left, Right, and Upward:Surfaces with discernible patterns and adequate lighting (lux > 5)Downward:Surfaces with discernible patterns and adequate lighting (lux > 5), and surfaces that are diffusely reflective with a reflectivity above 20% (e.g., walls, trees, people).  VIDEO TRANSMISSION Video Transmission System: Standard: Wi-Fi Video TransmissionOptional: DJI Neo 2 Digital Transceiver (O4)Live View Quality: With DJI RC-N3 Remote Controller: Up to 1080p/60fpsWith DJI Goggles N3 plus DJI RC Motion 3/DJI FPV Remote Controller 3: Up to 1080p/60fpsWith DJI Goggles 3 plus DJI RC Motion 3/DJI FPV Remote Controller 3: Up to 1080p/100fpsOperating Frequency: 2.400 GHz to 2.4835 GHz5.170 GHz to 5.250 GHz5.725 GHz to 5.850 GHzOperating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.Transmitter Power (EIRP): 2.4 GHz:< 26 dBm (FCC)< 20 dBm (CE/SRRC/MIC)5.1 GHz:< 23 dBm (CE)5.8 GHz:< 26 dBm (FCC)< 14 dBm (CE)< 26 dBm (SRRC)Communication Bandwidth: Max 60 MHzMax Transmission Distance (unobstructed, free of interference): FCC: 10 kmCE: 6 kmSRRC: 6 kmMIC: 6 kmMeasured in an unobstructed outdoor environment free of interference using the remote controller or goggles and showed the farthest communication range for one-way, non-return flights under each standard. The maximum video transmission distance in the actual flight scenarios is limited by the drone's maximum flight distance. Always pay attention to RTH reminders on the live view during your flight.Max Transmission Distance (unobstructed, with interference): Strong Interference: Urban landscape, approx. 1.5-3 kmMedium Interference: Suburban landscape, approx. 3-6 kmLow Interference: Suburb/Seaside, approx. 6-10 kmMeasured under FCC standard in unobstructed environments with typical interference, using the remote controller or goggles. Used for reference purposes only and provides no guarantee for actual transmission distance.Max Transmission Distance (obstructed, with interference): Low Interference and Obstructed by Buildings: Approx. 0-0.5 kmLow Interference and Obstructed by Trees: Approx. 0.5-3 kmMeasured under FCC standard in obstructed environments with typical low interference, using the remote controller or goggles. Used for reference purposes only and provides no guarantee for actual transmission distance.Max Download Speed: Wi-Fi: 80 MB/sMeasured in a laboratory environment with little interference in countries/regions that support both 2.4 GHz and 5.8 GHz. Download speeds may vary depending on the actual conditions.Lowest Latency: With DJI RC-N3 Remote Controller or DJI RC 2 Remote Controller: Approx. 120 msWith DJI Goggles N3 (1080p/60fps Video Transmission): Lowest latency at 54 msWith DJI Goggles 3 (1080p/100fps Video Transmission): Lowest latency at 50 msLatency data refers to the minimum delay during goggles screen refresh, measured in an open, interference‑free environment. Actual performance may vary with shooting conditions and mobile device.Max Video Bitrate: 60 MbpsAntenna: 2 antennas, 1T2R  WI-FI Protocol: 802.11a/b/g/n/ac/axOperating Frequency: 2.400 GHz to 2.4835 GHz5.725 GHz to 5.850 GHzOperating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.Transmitter Power (EIRP): 2.4 GHz:< 20 dBm (FCC/CE/SRRC/MIC)5.8 GHz:< 26 dBm (FCC/SRRC)< 14 dBm (CE)Effective Operating Range: 500 mMeasured in an open outdoor environment free of interference. Actual video transmission distance may vary depending on the operating environment and mobile device performance. Refer to the actual experience.  BLUETOOTH Protocol: Bluetooth 5.2Operating Frequency: 2.400 GHz to 2.4835 GHzOperating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.Transmitter Power (EIRP): < 10 dBm  BATTERY Capacity: 1606 mAhWeight: 46 gNominal Voltage: 7.16 VMax Charging Voltage: 8.6 VBattery Type: Li-ionChemical System: LiNiMnCoO2Energy: 11.5 WhCharging Temperature: 5° to 40° C (41° to 104° F)Charging Time: When Using the Two-Way Charging Hub (65W max charging power): Approx. 68 minutes to charge three batteries simultaneously from 0% to 100% When Directly Charging the Aircraft Body (15W max charging power): Approx. 70 minutes to charge from 0% to 100% Charging time is measured in a test environment with a temperature of 25° C (77° F). Actual charging time may increase due to higher ambient temperatures or variations in mains voltage between regions.  CHARGER Recommended Charger: DJI 65W Portable ChargerUSB Power Delivery chargers  BATTERY CHARGING HUB Input: 5 V, max 5 A9 V, max 5 A12 V, max 5 A15 V, max 4.33 A20 V, max 3.25 AMax current depends on adapter capability.Output (charging): 5 V, 2 ACharging Method: 3 batteries charged simultaneouslyThe number of batteries that can be charged simultaneously depends on the power of the charger used. Using a charger rated above 45 W allows you to charge three batteries at the same time. Using a charger rated between 30 W and 45 W allows you to charge only two batteries simultaneously. Using a charger below 30 W will charge the batteries sequentially, from the highest remaining charge to the lowest. Refer to the charging protocols supported by the charger.Compatibility: DJI Neo 2 Intelligent Flight Battery  STORAGE Recommended microSD Cards: Does not support storage expansion with an external SD card  DJI RC-N3 REMOTE CONTROLLER Max Operating Time: Without charging any mobile device: 3.5 hoursWhen charging a mobile device: 1.5 hoursOperating Temperature: -10° to 40° C (14° to 104° F)Charging Temperature: 5° to 40° C (41° to 104° F)Charging Time: 2 hoursCharging Method: 5 V, 2 ABattery Capacity: 2600 mAhWeight: Approx. 320 gDimensions: 104.2×150×45.2 mm (L×W×H)Operating Frequency: 2.400 GHz to 2.4835 GHz5.170 GHz to 5.250 GHz5.725 GHz to 5.850 GHzOperating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.Transmitter Power (EIRP): 2.4 GHz:< 33 dBm (FCC)< 20 dBm (CE/SRRC/MIC)5.1 GHz:< 23 dBm (CE)5.8 GHz:< 33 dBm (FCC)< 14 dBm (CE)< 30 dBm (SRRC) IN THE BOX DJI Neo 2 Aircraft × 1DJI Neo 2 Intelligent Flight Battery × 3DJI Neo 2 Two-Way Charging Hub × 1DJI Neo 2 Spare Propellers (Pair) × 1DJI Neo 2 Spare Propeller Screw × 4Screwdriver × 1DJI Neo 2 Propeller Guard (Pair) × 1DJI Neo 2 Gimbal Protector × 1USB-C to USB-C Data Cable × 1Documents (Quick Start Guide, Safety Guidelines, and DJI Logo Stickers) × 1

Read more less

SMALL, LIGHTWEIGHT, VERSATILE The DJI Mic 3 Transmitter is compact, lightweight, and discreet. It supports both magnetic and clip-on attachment methods. The detachable, rotatable clip allows you to flexibly adjust the microphone angle, whether clipped sideways or inverted, ensuring optimal audio capture in any scenario. ALL-IN-ONE, READY TO GO The charging case neatly holds two transmitters and one receiver. Each transmitter fits inside with the windscreen and either the magnet or magnetic clip attached—no need to remove them. When the transmitters are stored with the clips attached, the lid also has space for the magnets and locking audio adapter cable [1], so everything stays organized and ready to go.   PREMIUM AUDIO, SMARTER EXPERIENCEADAPTIVE GAIN CONTROL FOR BALANCED VOLUME [3] Automatic - Automatic mode effectively prevents audio clipping, making it ideal for outdoor environments with dramatic volume fluctuations, such as sporting events.Dynamic - Dynamic mode automatically adjusts gain in response to volume changes, ensuring consistent loudness—ideal for quiet indoor settings like studios.   THREE VOICE TONE PRESETS TO MATCH YOUR STYLE [4] Regular - Regular is the default setting, offering clean, natural, and balanced audio.Rich - Rich puts extra emphasis on the lows for a fuller, more powerful sound.Bright - Bright highlights the highs, giving your voice extra clarity and sparkle.   TWO-LEVEL NOISE CANCELLING FOR FOCUSED SOUND [5] Basic - The Basic level is ideal for quiet indoor settings, reducing fan, air conditioning, and reverb noises while preserving vocal clarity.Strong - The Strong level excels in noisy environments, significantly cutting ambient noise for clearer vocals. With the windscreen attached, the transmitter effectively reduces wind noise and other unwanted noise, delivering crisp, clear audio even in windy conditions or noisy environments—ideal for live streaming, vlogging, and more.   EFFORTLESS CONTROL, SMOOTH OPERATION On-Receiver Parameter Adjustment - The receiver features a 1.1-inch AMOLED touchscreen and a dial, putting gain, battery status, and modes at your fingertips. Adjust settings quickly and enjoy flexible, efficient operation.App-Based Control & Firmware Updates - Use the DJI Mimo app to fine-tune settings and update firmware directly from your phone. Enjoy quick, convenient parameter adjustments and effortless upgrades.     ROBUST PERFORMANCE, ENDLESS POSSIBILITIES4 TX + 8 RX FOR SEAMLESS COLLABORATION [2] DJI Mic 3's receiver can connect with up to four transmitters at once, letting you capture four audio sources simultaneously. The main receiver can also sync audio to up to seven additional receivers. Whether it's a group interview or a multi-camera production, you'll get crystal-clear audio on every device, making post-production a breeze.   FLEXIBLE, VERSATILE CHANNEL SETTINGS The receiver lets you choose between Mono and Stereo (dual-channel) modes—output audio from each transmitter separately, or merge them into a single track to suit any creative scenario.   FOUR-CHANNEL OUTPUT [2], EFFORTLESS EDITING When set to Quadraphonic mode, the DJI Mic 3 Receiver—paired with select Sony cameras or computer software—supports independent output of four audio tracks. This enables precise track separation and flexible mixing, giving you greater creative freedom in post-production.   DUAL-BAND RELIABILITY, ROCK-SOLID TRANSMISSION DJI Mic 3 supports automatic frequency hopping between 2.4 GHz and 5 GHz bands [6], with a transmission range of up to 400 meters [7]. Its robust anti-interference capabilities ensure stable audio transmission, even in complex wireless environments like trade shows.   LOSSLESS TRANSMISSION, PRISTINE AUDIO With Lossless Audio enabled [8], the transmitter delivers uncompressed 48kHz 24-bit audio directly to the receiver. This ensures every recording is captured in stunning, high-fidelity detail.   DUAL-FILE 32-BIT FLOAT INTERNAL RECORDING Internal Recording Never worry about lost audio—internal recording protects your material from wireless interference or device failures. With dual-file internal recording, DJI Mic 3 saves both the original track and an algorithm-enhanced version at once [9], streamlining your workflow and keeping your creative process smooth.   32-BIT FLOAT INTERNAL RECORDING With support for 32-bit float internal recording, DJI Mic 3 provides a high dynamic range that not only delivers high-quality recording but also adapts better to complex sound environments. It excels in capturing every nuance of a voice, from quiet whispers to booming decibel levels, providing greater reliability in erratic noise scenarios and more flexibility in post-production.     BUILT-IN TIMECODE FOR PRECISE SYNC DJI Mic 3 offers high-precision timecode support [10], with the transmitter embedding timecode data during internal recording and the receiver supporting both timecode input and output. With less than one frame of drift over 24 hours [11], you can instantly align multi-camera footage in post-production, making editing faster and more efficient.   HASSLE-FREE FILE EXPORT When you're done shooting, simply use the charging case and USB-C data cable to connect both transmitters to your computer or smartphone [12]. Instantly transfer all your internally recorded files in one go—editing and sharing couldn't be easier. ALL-DAY POWER, WORRY-FREE CREATION28-HOUR EXTENDED BATTERY LIFE [13] A transmitter lasts up to 8 hours [14], and a receiver up to 10 hours [14]. A fully charged charging case provides about 2.4 full charges to achieve a total of 28 hours of extended use [13]. Easily handle long video shoots and live streams without worrying about running out of power.   5-MINUTE QUICK CHARGE Charge for just 5 minutes and get up to 2 hours of use [15] from the transmitter and receiver—ideal for a quick power boost. With 3C fast charging support, a full charge takes only about 50 minutes [16], so you can get back to creating in no time.   MULTIPLE INTELLIGENT POWER-SAVING FEATURES Auto Power-Saving [17] - The transmitter automatically enters sleep mode when it doesn't detect a signal from the receiver. It will wake up and reconnect to the receiver once the signal is detected again. This feature allows you to wear the transmitter for extended periods without needing to frequently power it on and off.Auto Power-Off - On the receiver screen, or in the DJI Mimo app, you can set the transmitter and receiver to automatically power off after a period of inactivity. When this feature is enabled on both devices, they will automatically shut down if not connected for more than 15 minutes, preventing battery drain and preserving more power for your creativity.Auto On/Off With Camera - After enabling the Auto On/Off With Camera feature on the receiver screen or in the DJI Mimo app, the receiver, when connected to the camera via the 3.5mm audio cable or hot shoe, will automatically turn on when the camera is turned on and turn off when the camera is turned off.Use While Charging - When the receiver is connected to your smartphone via cable, it draws power directly from your phone. If you connect an external power source to the receiver's USB-C port, you can charge both the receiver and your phone simultaneously—so you can keep recording without interruption [18].   CONNECT INSTANTLY, CREATE FREELY DJI OsmoAudio™ Direct Connection - The transmitter supports direct connection to Osmo Action 5 Pro, Osmo Action 4, or Osmo Pocket 3 without a receiver [19]. The DJI OsmoAudio™ connection ecosystem delivers premium audio, simplifying your gear and workflow for a more efficient creative process.Wide Device Compatibility - The receiver offers multiple ports to meet your creative needs: a locking 3.5mm TRS output port for stable, interruption-free connections; a 3.5mm TRRS monitoring port for real-time audio monitoring; and a USB-C port for simultaneous charging and recording—ideal for phones, tablets, or computers. With the adapters, you can quickly adapt to different devices for a more efficient and flexible workflow.Bluetooth Direct-To-Phone [20] - No receiver required—the transmitter connects directly to your smartphone via Bluetooth, so you can easily use it with your favorite third-party recording or live streaming apps [21]. With the DJI Mimo app, you can adjust settings and update firmware all in one place, making setup and operation quick and effortless.     Notes* All of the above data was collected in a controlled environment. Actual experience may vary. For usage settings and suggestions, refer to the official DJI product page. When storing accessories in the charging case, avoid stacking to prevent receiver screen damage. To achieve the 4TX + 8RX setup or four-channel output, additional accessories must be purchased separately. The four-channel output feature is only supported by certain Sony camera models (requiring the DJI Mic Series Camera Adapter) and certain computer software (via USB output). For details, refer to the compatibility list on the Downloads page of the official DJI Mic 3 website. The Adaptive Gain Control feature can be configured via the receiver or the DJI Mimo app, and it is turned off by default. The Voice Tone Preset modes can be selected via the receiver or the DJI Mimo app, with the default set to Regular. The Noise Cancelling feature is turned off by default but can be activated and set to either Strong or Basic level through the receiver, DJI Mimo app, or device directly connected via the OsmoAudio™ ecosystem. When using the receiver with multiple transmitters, you can adjust the noise cancelling settings for each transmitter individually or for all transmitters simultaneously. When an Osmo Action 5 Pro, Osmo Action 4, or Osmo Pocket 3 is connected directly via OsmoAudio™, settings can be adjusted on the product interface. When the transmitter is directly connected to a smartphone, the settings can be adjusted within the Mimo app. Operating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information. Measured using DJI Mic 3 (2 TX + 1 RX + Charging Case), with Lossless Audio off, in an open, unobstructed environment free of interference. When Lossless Audio is enabled, the transmitter's battery life will decrease by approximately 2 hours under nominal operating conditions, and the maximum transmission range will be reduced by approximately 50%. Algorithm-based enhancements include voice tone presets, low cut, noise cancellation, and adaptive gain control. For details on supported timecode modes, frame rates, and timecode output formats, refer to the FAQ page on the official DJI Mic 3 website. Measured using DJI Mic 3 (2 TX + 1 RX + Charging Case) in an environment free of electromagnetic interference, with continuous power supplied to the transmitters and receiver following timecode synchronization and throughout 24 hours of continuous recording. For a list of compatible devices, refer to the Downloads page on the official DJI Mic 3 website. Measured using DJI Mic 3 (2 TX + 1 RX + Charging Case) paired with a fully charged charging case, with features such as noise cancellation and internal recording off, during close-range audio recording under interference-free conditions, with both transmitters connected to the receiver and the receiver connected to a camera via the 3.5mm audio cable. Measured using DJI Mic 3 (2 TX + 1 RX + Charging Case), with features such as noise cancellation and internal recording off, during close-range audio recording under interference-free conditions, with both transmitters connected to the receiver and the receiver connected to a camera via the 3.5mm audio cable. Measured in a controlled environment with the transmitters and receiver battery levels below 25%, using a charger of 5V output, with noise cancellation off, during close-range audio recording under interference-free conditions, with both transmitters connected to the receiver, and the receiver connected to a camera via the 3.5mm audio cable. Data was collected in a controlled environment and should be taken as reference only. This feature is only effective when the device is powered on. If the auto power-off feature for the transmitter and receiver is enabled in the DJI Mimo app or on the receiver screen, both devices will automatically shut down if no pairing signal is detected after 15 minutes. If your phone uses a Lightning interface, the receiver cannot be powered by the phone's battery without an external power source. To enable simultaneous charging and use, you need to purchase the DJI Mic 3 Mobile Phone Adapter (Lightning) separately. Some features of DJI Mic 3 cannot be configured through the device directly connected via the OsmoAudio™ ecosystem. For details, refer to the FAQ page on the official DJI Mic 3 website. Only one transmitter can be directly connected and used as the audio input source at a time. When connected directly to a smartphone via Bluetooth, the transmitter does not support audio recording with the phone's native camera app; it only works with third-party apps. For a list of compatible apps, refer to the Downloads page on the DJI Mic 3 official website. PRODUCT SPECIFICATIONS DJI MIC 3 TRANSMITTER Model: DMT03Dimensions: 28.77×28.34×16.35 mm (L×W×H) (with magnet)Weight: 16 g (with magnet)Wireless Mode: Wi-Fi: 802.11 a/b/g/n/ac/axSDR: CustomizableEquivalent Isotropic Radiated Power (EIRP): Wi-Fi:2.400-2.4835 GHz: < 20 dBm (FCC/CE/SRRC/MIC)5.725-5.850 GHz: < 20 dBm (FCC/SRRC), < 14 dBm (CE)SDR:2.400-2.4835 GHz: < 20 dBm (FCC/CE/SRRC/MIC)5.150-5.250 GHz: < 20 dBm (FCC/CE/SRRC/MIC)5.250-5.350 GHz: < 20 dBm (FCC/CE/SRRC/MIC)5.470-5.725 GHz: < 20 dBm (FCC/CE/MIC)5.725-5.850 GHz: < 20 dBm (FCC/SRRC), < 14 dBm (CE)Operating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.Wireless Mode Operating Frequency: Wi-Fi:2.400-2.4835 GHz5.725-5.850 GHzSDR:2.400-2.4835 GHz5.150-5.250 GHz5.250-5.350 GHz5.470-5.725 GHz5.725-5.850 GHzOperating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.Bluetooth Protocol: Bluetooth 5.4Bluetooth Operating Frequency: 2.400-2.4835 GHzBluetooth Transmitter Power (EIRP): BLE: < 10 dBmBR/EDR: < 20 dBmOperating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.Battery Type: Li-ionBattery Capacity: 137 mAhBattery Energy: 0.531 WhBattery Voltage: 3.87 VCharging Specification: Max 5 VCharging Temperature: 5° to 45° C (41° to 113° F)Operating Temperature: -10° to 45° C (14° to 113° F)Charging Time: Approx. 50 minutesOperating Time: 8 hoursMeasured using DJI Mic 3 (2 TX + 1 RX + Charging Case), with features such as noise cancellation and internal recording off, during close-range audio recording under interference-free conditions, with both transmitters connected to the receiver and the receiver connected to a camera via the 3.5mm audio cable.Internal Recording Available Duration: 24-bit (single file): 57.3 hours24-bit (dual file): 28.6 hours32-bit float (single file): 43.0 hours32-bit float (dual file): 21.5 hours  DJI MIC 3 RECEIVER Model: DMR03Dimensions: 53.85×28.69×22.00 mm (L×W×H)Weight: 25.1 gWireless Mode: Wi-Fi: 802.11 a/b/g/n/ac/axSDR: CustomizableEquivalent Isotropic Radiated Power (EIRP): Wi-Fi:2.400-2.4835 GHz: < 20 dBm (FCC/CE/SRRC/MIC)5.725-5.850 GHz: < 20 dBm (FCC/SRRC), < 14 dBm (CE)SDR:2.400-2.4835 GHz: < 20 dBm (FCC/CE/SRRC/MIC)5.150-5.250 GHz: < 20 dBm (FCC/CE/SRRC/MIC)5.250-5.350 GHz: < 20 dBm (FCC/CE/SRRC/MIC)5.470-5.725 GHz: < 20 dBm (FCC/CE/MIC)5.725-5.850 GHz: < 20 dBm (FCC/SRRC), < 14 dBm (CE)Operating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.Operating Frequency: Wi-Fi:2.400-2.4835 GHz5.725-5.850 GHzSDR:2.400-2.4835 GHz5.150-5.250 GHz5.250-5.350 GHz5.470-5.725 GHz5.725-5.850 GHzOperating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.Bluetooth Protocol: Bluetooth 5.4Bluetooth Operating Frequency: 2.400-2.4835 GHzBluetooth Transmitter Power (EIRP): BLE: < 10 dBmBattery Type: Li-ionBattery Capacity: 275 mAhBattery Energy: 1.065 WhBattery Voltage: 3.87 VCharging Specification: Max 5 VCharging Temperature: 5° to 45° C (41° to 113° F)Operating Temperature: -10° to 45° C (14° to 113° F)Charging Time: Approx. 50 minutesOperating Time: 10 hoursMeasured using DJI Mic 3 (2 TX + 1 RX + Charging Case), with features such as noise cancellation and internal recording off, during close-range audio recording under interference-free conditions, with both transmitters connected to the receiver and the receiver connected to a camera via the 3.5mm audio cable.  DJI MIC 3 CHARGING CASE Model: DMC03Dimensions: 106.30×42.50×59.20 mm (L×W×H)Weight: 164.1 g (charging case only)Battery Type: Li-ionBattery Capacity: 1950 mAhBattery Energy: 7.55 WhBattery Voltage: 3.87 VCharging Specification: Max 5 V, 1.5-2 ACharging Temperature: 5° to 40° C (41° to 104° F)Operating Temperature: 5° to 45° C (41° to 113° F)Charging Time: Approx. 1.5 hoursCharging Cycles for TX and RX: When charging two transmitters and one receiver simultaneously, a fully charged charging case can fully charge them for approx. 2.4 times.  GENERAL Polar Pattern: OmnidirectionalFrequency Response: Low Cut Off: 20 Hz-20 kHz (encoded)Low Cut Off: 20 Hz-24 kHz (lossless)Low Cut On: 100 Hz-20 kHz (encoded)Low Cut On: 100 Hz-20 kHz (lossless)Microphone Sensitivity: Microphone Capsule: -36±1 dBV@1 kHz, 94 dB SPLSignal-to-Noise Ratio (SNR): 72 dBMaximum Sound Pressure Level (SPL): 126 dB SPL@1% THD130 dB SPL@10% THDSampling Frequency: 48 kHzBit Depth: 32-bit float/24-bit (switchable)Max Input Level (3.5 mm): -Equivalent Noise: 22 dBAMonitor Interface Output Power: Max Output Power: 20 mW@1 kHz, 32 ΩMax Transmission Distance: 400 mMeasured using DJI Mic 3 (2 TX + 1 RX + Charging Case), with Lossless Audio off, in an open, unobstructed environment free of interference.80 mMeasured using DJI Mic 3 (2 TX + 1 RX + Charging Case) in a laboratory-simulated high-interference environment, with no packet loss and clear, high-fidelity audio.Supported Frame Rate: 23.98F, 24F, 25F, 29.97F, 29.97DF, 30F, 50F, 60FOffset: 0.5 ppm, deviation less than 1 frame within 24 hours** Measured using DJI Mic 3 (2 TX + 1 RX + Charging Case) in an environment free of electromagnetic interference, with continuous power supplied to the transmitters and receiver following timecode synchronization and throughout 24 hours of continuous recording.Input: LTCInput Port: 3.5mm TRSInput Voltage: Not greater than +6 dBuOutput: LTC, Audio-TCOutput Port: 3.5mm TRS, USB-COutput Voltage: 0.5 Vp-p IN THE BOX DJI Mic 3 Transmitter × 1DJI Mic 3 Receiver × 1DJI Mic 3 Transmitter Magnetic Charging Cable × 1DJI Mic 3 Mobile Phone Adapter (USB-C) × 1USB-C to USB-C Data Cable × 1DJI Mic 3 Locking Audio Adapter Cable (3.5mm TRS to TRS) × 1DJI Mic 3 Windscreen (Black/Gray) × 1DJI Mic 3 Windscreen (Black) × 1DJI Mic 3 Magnet × 1DJI Mic 3 Magnetic Clip × 1DJI Mic 3 Compact Carrying Pouch × 1

Read more less

SMALL, LIGHTWEIGHT, VERSATILE The DJI Mic 3 Transmitter is compact, lightweight, and discreet. It supports both magnetic and clip-on attachment methods. The detachable, rotatable clip allows you to flexibly adjust the microphone angle, whether clipped sideways or inverted, ensuring optimal audio capture in any scenario. ALL-IN-ONE, READY TO GO The charging case neatly holds two transmitters and one receiver. Each transmitter fits inside with the windscreen and either the magnet or magnetic clip attached—no need to remove them. When the transmitters are stored with the clips attached, the lid also has space for the magnets and locking audio adapter cable [1], so everything stays organized and ready to go.   PREMIUM AUDIO, SMARTER EXPERIENCEADAPTIVE GAIN CONTROL FOR BALANCED VOLUME [3] Automatic - Automatic mode effectively prevents audio clipping, making it ideal for outdoor environments with dramatic volume fluctuations, such as sporting events.Dynamic - Dynamic mode automatically adjusts gain in response to volume changes, ensuring consistent loudness—ideal for quiet indoor settings like studios.   THREE VOICE TONE PRESETS TO MATCH YOUR STYLE [4] Regular - Regular is the default setting, offering clean, natural, and balanced audio.Rich - Rich puts extra emphasis on the lows for a fuller, more powerful sound.Bright - Bright highlights the highs, giving your voice extra clarity and sparkle.   TWO-LEVEL NOISE CANCELLING FOR FOCUSED SOUND [5] Basic - The Basic level is ideal for quiet indoor settings, reducing fan, air conditioning, and reverb noises while preserving vocal clarity.Strong - The Strong level excels in noisy environments, significantly cutting ambient noise for clearer vocals. With the windscreen attached, the transmitter effectively reduces wind noise and other unwanted noise, delivering crisp, clear audio even in windy conditions or noisy environments—ideal for live streaming, vlogging, and more.   EFFORTLESS CONTROL, SMOOTH OPERATION On-Receiver Parameter Adjustment - The receiver features a 1.1-inch AMOLED touchscreen and a dial, putting gain, battery status, and modes at your fingertips. Adjust settings quickly and enjoy flexible, efficient operation.App-Based Control & Firmware Updates - Use the DJI Mimo app to fine-tune settings and update firmware directly from your phone. Enjoy quick, convenient parameter adjustments and effortless upgrades.     ROBUST PERFORMANCE, ENDLESS POSSIBILITIES4 TX + 8 RX FOR SEAMLESS COLLABORATION [2] DJI Mic 3's receiver can connect with up to four transmitters at once, letting you capture four audio sources simultaneously. The main receiver can also sync audio to up to seven additional receivers. Whether it's a group interview or a multi-camera production, you'll get crystal-clear audio on every device, making post-production a breeze.   FLEXIBLE, VERSATILE CHANNEL SETTINGS The receiver lets you choose between Mono and Stereo (dual-channel) modes—output audio from each transmitter separately, or merge them into a single track to suit any creative scenario.   FOUR-CHANNEL OUTPUT [2], EFFORTLESS EDITING When set to Quadraphonic mode, the DJI Mic 3 Receiver—paired with select Sony cameras or computer software—supports independent output of four audio tracks. This enables precise track separation and flexible mixing, giving you greater creative freedom in post-production.   DUAL-BAND RELIABILITY, ROCK-SOLID TRANSMISSION DJI Mic 3 supports automatic frequency hopping between 2.4 GHz and 5 GHz bands [6], with a transmission range of up to 400 meters [7]. Its robust anti-interference capabilities ensure stable audio transmission, even in complex wireless environments like trade shows.   LOSSLESS TRANSMISSION, PRISTINE AUDIO With Lossless Audio enabled [8], the transmitter delivers uncompressed 48kHz 24-bit audio directly to the receiver. This ensures every recording is captured in stunning, high-fidelity detail.   DUAL-FILE 32-BIT FLOAT INTERNAL RECORDING Internal Recording Never worry about lost audio—internal recording protects your material from wireless interference or device failures. With dual-file internal recording, DJI Mic 3 saves both the original track and an algorithm-enhanced version at once [9], streamlining your workflow and keeping your creative process smooth.   32-BIT FLOAT INTERNAL RECORDING With support for 32-bit float internal recording, DJI Mic 3 provides a high dynamic range that not only delivers high-quality recording but also adapts better to complex sound environments. It excels in capturing every nuance of a voice, from quiet whispers to booming decibel levels, providing greater reliability in erratic noise scenarios and more flexibility in post-production.     BUILT-IN TIMECODE FOR PRECISE SYNC DJI Mic 3 offers high-precision timecode support [10], with the transmitter embedding timecode data during internal recording and the receiver supporting both timecode input and output. With less than one frame of drift over 24 hours [11], you can instantly align multi-camera footage in post-production, making editing faster and more efficient.   HASSLE-FREE FILE EXPORT When you're done shooting, simply use the charging case and USB-C data cable to connect both transmitters to your computer or smartphone [12]. Instantly transfer all your internally recorded files in one go—editing and sharing couldn't be easier. ALL-DAY POWER, WORRY-FREE CREATION28-HOUR EXTENDED BATTERY LIFE [13] A transmitter lasts up to 8 hours [14], and a receiver up to 10 hours [14]. A fully charged charging case provides about 2.4 full charges to achieve a total of 28 hours of extended use [13]. Easily handle long video shoots and live streams without worrying about running out of power.   5-MINUTE QUICK CHARGE Charge for just 5 minutes and get up to 2 hours of use [15] from the transmitter and receiver—ideal for a quick power boost. With 3C fast charging support, a full charge takes only about 50 minutes [16], so you can get back to creating in no time.   MULTIPLE INTELLIGENT POWER-SAVING FEATURES Auto Power-Saving [17] - The transmitter automatically enters sleep mode when it doesn't detect a signal from the receiver. It will wake up and reconnect to the receiver once the signal is detected again. This feature allows you to wear the transmitter for extended periods without needing to frequently power it on and off.Auto Power-Off - On the receiver screen, or in the DJI Mimo app, you can set the transmitter and receiver to automatically power off after a period of inactivity. When this feature is enabled on both devices, they will automatically shut down if not connected for more than 15 minutes, preventing battery drain and preserving more power for your creativity.Auto On/Off With Camera - After enabling the Auto On/Off With Camera feature on the receiver screen or in the DJI Mimo app, the receiver, when connected to the camera via the 3.5mm audio cable or hot shoe, will automatically turn on when the camera is turned on and turn off when the camera is turned off.Use While Charging - When the receiver is connected to your smartphone via cable, it draws power directly from your phone. If you connect an external power source to the receiver's USB-C port, you can charge both the receiver and your phone simultaneously—so you can keep recording without interruption [18].   CONNECT INSTANTLY, CREATE FREELY DJI OsmoAudio™ Direct Connection - The transmitter supports direct connection to Osmo Action 5 Pro, Osmo Action 4, or Osmo Pocket 3 without a receiver [19]. The DJI OsmoAudio™ connection ecosystem delivers premium audio, simplifying your gear and workflow for a more efficient creative process.Wide Device Compatibility - The receiver offers multiple ports to meet your creative needs: a locking 3.5mm TRS output port for stable, interruption-free connections; a 3.5mm TRRS monitoring port for real-time audio monitoring; and a USB-C port for simultaneous charging and recording—ideal for phones, tablets, or computers. With the adapters, you can quickly adapt to different devices for a more efficient and flexible workflow.Bluetooth Direct-To-Phone [20] - No receiver required—the transmitter connects directly to your smartphone via Bluetooth, so you can easily use it with your favorite third-party recording or live streaming apps [21]. With the DJI Mimo app, you can adjust settings and update firmware all in one place, making setup and operation quick and effortless.     Notes* All of the above data was collected in a controlled environment. Actual experience may vary. For usage settings and suggestions, refer to the official DJI product page. When storing accessories in the charging case, avoid stacking to prevent receiver screen damage. To achieve the 4TX + 8RX setup or four-channel output, additional accessories must be purchased separately. The four-channel output feature is only supported by certain Sony camera models (requiring the DJI Mic Series Camera Adapter) and certain computer software (via USB output). For details, refer to the compatibility list on the Downloads page of the official DJI Mic 3 website. The Adaptive Gain Control feature can be configured via the receiver or the DJI Mimo app, and it is turned off by default. The Voice Tone Preset modes can be selected via the receiver or the DJI Mimo app, with the default set to Regular. The Noise Cancelling feature is turned off by default but can be activated and set to either Strong or Basic level through the receiver, DJI Mimo app, or device directly connected via the OsmoAudio™ ecosystem. When using the receiver with multiple transmitters, you can adjust the noise cancelling settings for each transmitter individually or for all transmitters simultaneously. When an Osmo Action 5 Pro, Osmo Action 4, or Osmo Pocket 3 is connected directly via OsmoAudio™, settings can be adjusted on the product interface. When the transmitter is directly connected to a smartphone, the settings can be adjusted within the Mimo app. Operating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information. Measured using DJI Mic 3 (2 TX + 1 RX + Charging Case), with Lossless Audio off, in an open, unobstructed environment free of interference. When Lossless Audio is enabled, the transmitter's battery life will decrease by approximately 2 hours under nominal operating conditions, and the maximum transmission range will be reduced by approximately 50%. Algorithm-based enhancements include voice tone presets, low cut, noise cancellation, and adaptive gain control. For details on supported timecode modes, frame rates, and timecode output formats, refer to the FAQ page on the official DJI Mic 3 website. Measured using DJI Mic 3 (2 TX + 1 RX + Charging Case) in an environment free of electromagnetic interference, with continuous power supplied to the transmitters and receiver following timecode synchronization and throughout 24 hours of continuous recording. For a list of compatible devices, refer to the Downloads page on the official DJI Mic 3 website. Measured using DJI Mic 3 (2 TX + 1 RX + Charging Case) paired with a fully charged charging case, with features such as noise cancellation and internal recording off, during close-range audio recording under interference-free conditions, with both transmitters connected to the receiver and the receiver connected to a camera via the 3.5mm audio cable. Measured using DJI Mic 3 (2 TX + 1 RX + Charging Case), with features such as noise cancellation and internal recording off, during close-range audio recording under interference-free conditions, with both transmitters connected to the receiver and the receiver connected to a camera via the 3.5mm audio cable. Measured in a controlled environment with the transmitters and receiver battery levels below 25%, using a charger of 5V output, with noise cancellation off, during close-range audio recording under interference-free conditions, with both transmitters connected to the receiver, and the receiver connected to a camera via the 3.5mm audio cable. Data was collected in a controlled environment and should be taken as reference only. This feature is only effective when the device is powered on. If the auto power-off feature for the transmitter and receiver is enabled in the DJI Mimo app or on the receiver screen, both devices will automatically shut down if no pairing signal is detected after 15 minutes. If your phone uses a Lightning interface, the receiver cannot be powered by the phone's battery without an external power source. To enable simultaneous charging and use, you need to purchase the DJI Mic 3 Mobile Phone Adapter (Lightning) separately. Some features of DJI Mic 3 cannot be configured through the device directly connected via the OsmoAudio™ ecosystem. For details, refer to the FAQ page on the official DJI Mic 3 website. Only one transmitter can be directly connected and used as the audio input source at a time. When connected directly to a smartphone via Bluetooth, the transmitter does not support audio recording with the phone's native camera app; it only works with third-party apps. For a list of compatible apps, refer to the Downloads page on the DJI Mic 3 official website. PRODUCT SPECIFICATIONS DJI MIC 3 TRANSMITTER Model: DMT03Dimensions: 28.77×28.34×16.35 mm (L×W×H) (with magnet)Weight: 16 g (with magnet)Wireless Mode: Wi-Fi: 802.11 a/b/g/n/ac/axSDR: CustomizableEquivalent Isotropic Radiated Power (EIRP): Wi-Fi:2.400-2.4835 GHz: < 20 dBm (FCC/CE/SRRC/MIC)5.725-5.850 GHz: < 20 dBm (FCC/SRRC), < 14 dBm (CE)SDR:2.400-2.4835 GHz: < 20 dBm (FCC/CE/SRRC/MIC)5.150-5.250 GHz: < 20 dBm (FCC/CE/SRRC/MIC)5.250-5.350 GHz: < 20 dBm (FCC/CE/SRRC/MIC)5.470-5.725 GHz: < 20 dBm (FCC/CE/MIC)5.725-5.850 GHz: < 20 dBm (FCC/SRRC), < 14 dBm (CE)Operating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.Wireless Mode Operating Frequency: Wi-Fi:2.400-2.4835 GHz5.725-5.850 GHzSDR:2.400-2.4835 GHz5.150-5.250 GHz5.250-5.350 GHz5.470-5.725 GHz5.725-5.850 GHzOperating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.Bluetooth Protocol: Bluetooth 5.4Bluetooth Operating Frequency: 2.400-2.4835 GHzBluetooth Transmitter Power (EIRP): BLE: < 10 dBmBR/EDR: < 20 dBmOperating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.Battery Type: Li-ionBattery Capacity: 137 mAhBattery Energy: 0.531 WhBattery Voltage: 3.87 VCharging Specification: Max 5 VCharging Temperature: 5° to 45° C (41° to 113° F)Operating Temperature: -10° to 45° C (14° to 113° F)Charging Time: Approx. 50 minutesOperating Time: 8 hoursMeasured using DJI Mic 3 (2 TX + 1 RX + Charging Case), with features such as noise cancellation and internal recording off, during close-range audio recording under interference-free conditions, with both transmitters connected to the receiver and the receiver connected to a camera via the 3.5mm audio cable.Internal Recording Available Duration: 24-bit (single file): 57.3 hours24-bit (dual file): 28.6 hours32-bit float (single file): 43.0 hours32-bit float (dual file): 21.5 hours  DJI MIC 3 RECEIVER Model: DMR03Dimensions: 53.85×28.69×22.00 mm (L×W×H)Weight: 25.1 gWireless Mode: Wi-Fi: 802.11 a/b/g/n/ac/axSDR: CustomizableEquivalent Isotropic Radiated Power (EIRP): Wi-Fi:2.400-2.4835 GHz: < 20 dBm (FCC/CE/SRRC/MIC)5.725-5.850 GHz: < 20 dBm (FCC/SRRC), < 14 dBm (CE)SDR:2.400-2.4835 GHz: < 20 dBm (FCC/CE/SRRC/MIC)5.150-5.250 GHz: < 20 dBm (FCC/CE/SRRC/MIC)5.250-5.350 GHz: < 20 dBm (FCC/CE/SRRC/MIC)5.470-5.725 GHz: < 20 dBm (FCC/CE/MIC)5.725-5.850 GHz: < 20 dBm (FCC/SRRC), < 14 dBm (CE)Operating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.Operating Frequency: Wi-Fi:2.400-2.4835 GHz5.725-5.850 GHzSDR:2.400-2.4835 GHz5.150-5.250 GHz5.250-5.350 GHz5.470-5.725 GHz5.725-5.850 GHzOperating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.Bluetooth Protocol: Bluetooth 5.4Bluetooth Operating Frequency: 2.400-2.4835 GHzBluetooth Transmitter Power (EIRP): BLE: < 10 dBmBattery Type: Li-ionBattery Capacity: 275 mAhBattery Energy: 1.065 WhBattery Voltage: 3.87 VCharging Specification: Max 5 VCharging Temperature: 5° to 45° C (41° to 113° F)Operating Temperature: -10° to 45° C (14° to 113° F)Charging Time: Approx. 50 minutesOperating Time: 10 hoursMeasured using DJI Mic 3 (2 TX + 1 RX + Charging Case), with features such as noise cancellation and internal recording off, during close-range audio recording under interference-free conditions, with both transmitters connected to the receiver and the receiver connected to a camera via the 3.5mm audio cable.  DJI MIC 3 CHARGING CASE Model: DMC03Dimensions: 106.30×42.50×59.20 mm (L×W×H)Weight: 164.1 g (charging case only)Battery Type: Li-ionBattery Capacity: 1950 mAhBattery Energy: 7.55 WhBattery Voltage: 3.87 VCharging Specification: Max 5 V, 1.5-2 ACharging Temperature: 5° to 40° C (41° to 104° F)Operating Temperature: 5° to 45° C (41° to 113° F)Charging Time: Approx. 1.5 hoursCharging Cycles for TX and RX: When charging two transmitters and one receiver simultaneously, a fully charged charging case can fully charge them for approx. 2.4 times.  GENERAL Polar Pattern: OmnidirectionalFrequency Response: Low Cut Off: 20 Hz-20 kHz (encoded)Low Cut Off: 20 Hz-24 kHz (lossless)Low Cut On: 100 Hz-20 kHz (encoded)Low Cut On: 100 Hz-20 kHz (lossless)Microphone Sensitivity: Microphone Capsule: -36±1 dBV@1 kHz, 94 dB SPLSignal-to-Noise Ratio (SNR): 72 dBMaximum Sound Pressure Level (SPL): 126 dB SPL@1% THD130 dB SPL@10% THDSampling Frequency: 48 kHzBit Depth: 32-bit float/24-bit (switchable)Max Input Level (3.5 mm): -Equivalent Noise: 22 dBAMonitor Interface Output Power: Max Output Power: 20 mW@1 kHz, 32 ΩMax Transmission Distance: 400 mMeasured using DJI Mic 3 (2 TX + 1 RX + Charging Case), with Lossless Audio off, in an open, unobstructed environment free of interference.80 mMeasured using DJI Mic 3 (2 TX + 1 RX + Charging Case) in a laboratory-simulated high-interference environment, with no packet loss and clear, high-fidelity audio.Supported Frame Rate: 23.98F, 24F, 25F, 29.97F, 29.97DF, 30F, 50F, 60FOffset: 0.5 ppm, deviation less than 1 frame within 24 hours** Measured using DJI Mic 3 (2 TX + 1 RX + Charging Case) in an environment free of electromagnetic interference, with continuous power supplied to the transmitters and receiver following timecode synchronization and throughout 24 hours of continuous recording.Input: LTCInput Port: 3.5mm TRSInput Voltage: Not greater than +6 dBuOutput: LTC, Audio-TCOutput Port: 3.5mm TRS, USB-COutput Voltage: 0.5 Vp-p   IN THE BOX DJI Mic 3 Transmitter × 2DJI Mic 3 Receiver × 1DJI Mic 3 Charging Case × 1DJI Mic 3 Mobile Phone Adapter (USB-C) × 1USB-C to USB-C Data Cable × 1DJI Mic 3 Locking Audio Adapter Cable (3.5mm TRS to TRS) × 1DJI Mic 3 Windscreen (Black/Gray) × 2DJI Mic 3 Windscreen (Black) × 2DJI Mic 3 Magnet × 2DJI Mic 3 Magnetic Clip × 2DJI Mic 3 Carrying Pouch × 1

Read more less

Quick to tighten and built to last, this clamp pairs with the Motorcycle Heavy-Duty Mount* and High-Strength Carbon Fiber Invisible Selfie Stick* for secure, stable third-person motorcycling shots. One end easily converts to a 1/4" thread hole for added versatility. * Sold separately.   TipsFor third-person motorcycling shots, use with the Osmo 1m High-Strength Carbon Fiber Invisible Selfie Stick*. * Sold separately.   CompatibilityOsmo 360Osmo Action 3Osmo Action 4Osmo Action 5 Pro PRODUCT SPECIFICATIONS Dimensions: Approx. 220 × 90 × 37 mm (L × W × H)Weight: Approx. 305 g IN THE BOX Osmo Dual Heavy-Duty Clamp × 1Osmo Locking Screw × 1Ball Head to Two-Prong Adapter × 1Ball Head to 1/4" Thread Adapter × 1

Read more less

When used with Osmo 360, it offers special side-tracking views reminiscent of drone footage, making it easy to capture spectacular 360° footage. Made of high-strength carbon fiber, it's both lightweight and durable—reliable even during intense action.   TipsBefore storing the selfie stick, ensure that sand and other foreign objects are removed from the surface. If the selfie stick comes into contact with seawater, rinse it with fresh water and dry it thoroughly before storing.   CompatibilityOsmo 360 PRODUCT SPECIFICATIONS Dimensions (folded): Length approx. 402 mm, diameter approx. 41 mmDimensions (unfolded): Length approx. 2500 mm, diameter approx. 41 mmWeight: Approx. 428 g IN THE BOX Osmo 2.5m Extended Carbon Fiber Selfie Stick × 1

Read more less

Specifically designed for stationary 360° shots, this tripod selfie stick captures expansive scenes from optimal angles with rock-solid stability. Its lightweight yet durable build unfolds quickly *, ensuring a smooth and efficient shooting experience. * Suitable for stable, level surfaces in windless environments. Do not use while in motion.   Tips1. Be careful to avoid pinching your fingers when folding the tripod. 2. Ensure the tripod is placed on a stable, windless surface during use. 3. Before storing the selfie stick, make sure to remove any sand or debris from the surface. If the selfie stick comes into contact with seawater, rinse it with fresh water and dry it thoroughly before storing.   CompatibilityOsmo 360 PRODUCT SPECIFICATIONS Dimensions (Folded): Length approx. 347 mm, Diameter approx. 38 mmDimensions (Unfolded): Length approx. 1600 mm, Diameter approx. 502 mmWeight: Approx. 378 g IN THE BOX Osmo 1.6m Tripod Selfie Stick × 1

Read more less

When used with Osmo 360, the selfie stick disappears from the shot, enabling a dramatic third-person perspective *; it extends up to 1.2 meters, offering a wider field of view. Equipped with an adjustable quick-release adapter mount, it supports fast angle adjustments, achieving either the invisible selfie stick effect or precise single-lens framing. * Recommended for handheld use only. Do not use in environments with strong vibrations. For vehicle-mounted applications (e.g., motorcycles or cars), use the High-Strength Carbon Fiber Invisible Selfie Stick together with the appropriate stabilizing accessories.   TipsBefore storing the selfie stick, ensure that sand and other foreign objects are removed from the surface. If the selfie stick comes into contact with seawater, rinse it with fresh water and dry it thoroughly before storing.   CompatibilityOsmo 360 PRODUCT SPECIFICATIONS Osmo 1.2m Invisible Selfie StickDimensions (Folded): Length approx. 251 mm, diameter approx. 24 mmDimensions (Unfolded): Length approx. 1200 mm, diameter approx. 24 mmWeight: Approx. 137 g Osmo Adjustable Quick-Release Adapter MountDimensions: Approx. 41 × 22 × 32 mm (L × W × H)Weight: Approx. 27 g IN THE BOX Osmo 1.2m Invisible Selfie Stick × 1Osmo Adjustable Quick-Release Adapter Mount × 1

Read more less

When used with Osmo 360, the selfie stick disappears from the shot, enabling a dramatic third-person perspective. Made of high-strength carbon fiber, it's both lightweight and durable—reliable even during intense action.   TipsBefore storing the selfie stick, ensure that sand and other foreign objects are removed from the surface. If the selfie stick comes into contact with seawater, rinse it with fresh water and dry it thoroughly before storing.   CompatibilityOsmo 360 PRODUCT SPECIFICATIONS Dimensions (Folded): Length approx. 278 mm, diameter approx. 27 mmDimensions (Unfolded): Length approx. 1000 mm, diameter approx. 27 mmWeight: Approx. 157 g IN THE BOX Osmo 1m High-Strength Carbon Fiber Invisible Selfie Stick × 1

Read more less

When used with Osmo 360, the selfie stick disappears from the shot, enabling a dramatic third-person perspective *. Its lightweight design folds down to palm size, making it easy to carry anywhere. * Recommended for handheld use only. Do not use in environments with strong vibrations. For vehicle-mounted applications (e.g., motorcycles or cars), use the High-Strength Carbon Fiber Invisible Selfie Stick together with the appropriate stabilizing accessories.   TipsBefore storing the selfie stick, ensure that sand and other foreign objects are removed from the surface. If the selfie stick comes into contact with seawater, rinse it with fresh water and dry it thoroughly before storing.   CompatibilityOsmo 360 PRODUCT SPECIFICATIONS Dimensions (Folded): Approx. 181 mm in length, Approx. 24 mm in diameterDimensions (Unfolded): Length approx. 700 mm, diameter approx. 24 mmWeight: Approx. 101 g IN THE BOX Osmo 70cm Invisible Selfie Stick × 1

Read more less

The curved base fits snugly against the helmet and adheres firmly to stay in place. Paired with a high-strength carbon fiber straight rod, it enables a distinctive third-person tracking perspective.   Tips1. When attaching the base, press firmly for more than 30 seconds, and let it sit for 30 minutes to ensure adhesion. 2. This product is intended for one-time use on clean, curved surfaces only. If the surface is not sufficiently smooth, apply the included adhesive pad first, then attach the base. 3. The ideal application temperature is between -10°C and 40°C (14° F to 104° F). 4. After wearing, be sure to tighten the locking nut to prevent shaking or displacement due to significant bumps during movement. 5. While capturing 360° shots, The bottom of the camera facing the helmet may be closer than the minimum required stitching distance. Adjust the angle and composition to avoid close-range stitching flaws at the bottom.   CompatibilityOsmo 360 PRODUCT SPECIFICATIONS Osmo Curved Adhesive Base MaxDimensions: Approx. 50 × 55 × 24 mm (L × W × H)Weight: Approx. 17 g Hex KeyDimensions: Approx. 53 × 97 × 16 mm (L × W × H)Weight: Approx. 8 g 28cm Carbon Fiber Straight RodDimensions: Approx. 291 × 17 × 23 mm (L × W × H)Weight: Approx. 45 g Osmo Locking ScrewDimensions: Approx. 13.3 × 23 × 55.6 mm (L × W × H)Weight: Approx. 12 g 1/4'' Thread to Two-Prong AdapterDimensions: Approx. 32×18×18 mm (L×W×H)Weight: Approx. 9 g Osmo Action Quick-Release Adapter MountDimensions: Approx. 41×21×34 mm (L×W×H)Weight: 16 g IN THE BOX Osmo Curved Adhesive Base Max × 128 cm Carbon Fiber Straight Rod × 11/4" Thread to Dual Prong Adapter × 1Osmo Action Quick-Release Adapter Mount × 1Osmo Locking Screw × 1Screw Locking Wrench × 1Hex Key × 1

Read more less

It uses a unique silica gel material that is comfortable to wear and can reshape freely, allowing you to take FPV footage easily. Larger size design for more comfortable wear, paired with a strap for added stability.   Tips Use caution when participating in certain extreme sports like rock climbing and diving. Ensure that no foreign objects get caught around your neck to avoid the risk of suffocation.   CompatibilityOsmo 360Osmo Action 5 ProOsmo Action 4Osmo Action 3Osmo Action PRODUCT SPECIFICATIONS Osmo Hanging Neck Mount MaxDimensions: Approx. 260 × 185 × 50 mm (L × W × H)Hose Length: Approx. 560 mmWeight: Approx. 165 g Osmo Locking ScrewDimensions: Approx. 13.3 × 23 × 55.6 mm (L × W × H)Weight: Approx. 12 g IN THE BOX Osmo Hanging Neck Mount Max × 1Chest Strap × 1Osmo Locking Screw × 1

Read more less

Specifically designed for Osmo 360, it fits securely to the lens, providing effective protection for more peace of mind when filming in extreme conditions. Multi-layer coated glass and professional optical design minimize image quality loss, ensuring your 360° shots remain clear and vibrant.   Tips Specifically designed for Osmo 360, it fits securely to the lens, providing effective protection for more peace of mind when filming in extreme conditions. Multi-layer coated glass and professional optical design minimize image quality loss, ensuring your 360° shots remain clear and vibrant.   CompatibilityOsmo 360 PRODUCT SPECIFICATIONS Dimensions: Approx. 38 × 18.5 × 41 mm (L × W × H)Weight: Approx. 4 g (2 pieces) IN THE BOX Osmo 360 Transparent Lens Protector × 2Osmo Lens Cleaning Cloth × 1

Read more less

Featuring a magnetic quick-release design, this mount ensures a secure and reliable connection with the camera. It is compatible with 1/4" threaded invisible selfie sticks for easy installation*. The adjustable tilt makes it easy to fine-tune the camera angle for more accurate single-lens framing. * The Osmo 360 Standard Combo does not include an Invisible Selfie Stick, which can be purchased separately.   Tips 1. When using the invisible selfie stick feature, adjust the adapter to the 0° position to ensure the selfie stick and camera are aligned in the horizontal direction. 2. When using with other 1/4" accessories, be sure to tighten the threads to prevent accessories from loosening or falling due to vibration. PRODUCT SPECIFICATIONS Dimensions: Approx. 41 × 22 × 32 mm (L × W × H)Weight: Approx. 27 gJoint Angle (two stops): 0°, 68° IN THE BOX Osmo Adjustable Quick-Release Adapter Mount × 1

Read more less