Provides storage, charging, and power accumulation for batteries. Paired with the DJI 65W Portable Charger, it can fully charge an Intelligent Flight Battery in only 45 minutes. It can sequentially charge three batteries at a time, eliminating the hassle of charging batteries one by one. It can also serve as a mobile power bank to charge devices like the DJI Goggles and smartphones.
Compatibility
DJI Avata 2
PRODUCT SPECIFICATIONS
Input: 5-20 V, max 3 AInput (Power Accumulation): Max 65 WOutput (Charging): Max 17 VOutput (USB): 5 V, 2 ACharging Method: Three batteries charged in sequenceRecommended Chargers: DJI 65W Portable Charger, DJI 65W Car Charger, or other USB Power Delivery chargers
Universal ports, easy to use.
Product Description
The DJI 65W Car Charger has a stable output power of 65 W. It has two output ports (USB-C and USB-A) and can charge Intelligent Flight Batteries and an RC simultaneously. It supports PPS and PD protocols and can charge your phone, laptop, and other devices.
Highlights
Universal ports, easy to use
In The Box
65W Car Charger × 1
USB-C Charging Cable ×1
Providing up to 31 minutes of flight time, the intelligent flight battery grants higher energy density with less weight. The built-in DJI Intelligent Battery Management System ensures safer flight.
The DJI Mini 2 Intelligent Flight Battery features a high energy density that not only lowers the overall weight but extends max flight time to 31 minutes for even more fun. With the built-in DJI Intelligent Battery Management System, battery status is monitored and reported in real-time, allowing you to focus less on battery level and more on flying. Stable energy output and accurate calculation of remaining flight time add another layer of safety during flight.
Product Specifications
Model: BWX161-2250-7.7Rated Capacity: 2250 mAhBattery Type: LiPo 2SRated Voltage: 7.7 VCharging Voltage Limit: 8.8 VCharging Temperature: 5° to 40°C (41° to 104°F)Max Charging Power: 29 W
In The Box
DJI Mini 2 Intelligent Flight Battery × 1
FEATURES
Adapt to strong lighting conditions with ND16/64/256 filters and always be ready for the perfect shot.Meets the needs of scenarios when shooting long exposure or in harsh lighting, e.g. long exposure timelapse.
CompatibilityDJI Mini 4 Pro
IN THE BOX
ND16 Filter × 1ND64 Filter × 1ND256 Filter × 1
Magnetic design with adjustable brightness and color temperature.
Product Description
As an independent accessory designed for low-light shooting, the DJI OM Fill Light Phone Clamp features a magnetic design that is seamlessly compatible with DJI OM 5 and DJI OM 4 Series. It features built-in LED auxiliary lights with three brightness levels and three color temperature options, letting you highlight subjects with excellent lighting wherever you go.
Highlights
Built-in LED auxiliary lights with three brightness levels and three color temperature options let you highlight subjects with excellent lighting wherever you go.
Tips
Designed with a closed magnetic circuit, the DJI OM Fill Light Phone Clamp will not affect the performance of the phone attached to it. However, some phones may require calibration after mounting. The magnetic design may influence other magnetic products. Do not put the phone clamp near a bank card, cardiac pacemaker, hard drive, or similar devices.
Additionally, some phones using magnetic signals to transmit data may be affected. In this case, we suggest you remove the phone clamp before using this function.
Compatibility
DJI OM 5DJI OM 4 SEDJI OM 4
The DJI Remote Controller Tablet Holder for Mavic Air 2 and Mini 2 is compatible with most tablets on the market.
Product Description
The DJI Remote Controller Tablet Holder for Mavic Air 2 and Mini 2 is compatible with most tablets on the market. The base can be mounted on the DJI RC-N1 Remote Controller’s Mobile Device Holder. The spring clamp at the top centers and holds 7-10 inch tablets firmly.
CompatibilityMavic Air 2 Remote ControllerDJI Mini 2 Remote Controller
In The Box
Tablet Holder ×1
The ND filters provide experienced users with precise control over shutter speed, allowing them to produce smooth footage in bright environments with lower shutter speeds. Flexible use of this set can ensure clean footage, even when the shutter opens to 180° with a low ISO.
* Shutter opening angle is a common way of describing the shutter speed relative to the frame rate. If the camera is recording at 24fps with the shutter open at 180°, the exposure time is 1/48 s.
CompatibilityDJI Flip
DJI Lito X1
PRODUCT SPECIFICATIONS
Weight (single lens): 0.34 g
IN THE BOX
ND16 Filter × 1ND64 Filter × 1ND256 Filter × 1
When used with Osmo Pocket 3, the Black Mist Filter can control highlight flares, lower image sharpness, and reduce blemishes and other skin imperfections during shooting. Thanks to the magnetic design, it can be easily mounted on the camera lens of Osmo Pocket 3.
The Propeller Guard uses a smart design for quick assembly and disassembly improving flight safety and protecting people and objects from spinning propellers.
Compatibility
DJI Mavic 3 ProDJI Mavic 3 Pro Cine
Improving flight safety; quick assembly and disassembly.
Product Description
Protecting people and objects from spinning propellers and improving flight safety, the Mavic 3 Propeller Guard features an Ingenious design for quick assembly and disassembly.
Highlights
Improving flight safety; quick assembly and disassembly.
Compatibility
DJI Mavic 3 DJI Mavic 3 Cine
Product Specifications
Weight (one side): 58 gRadius: 157 mmMax Outline Dimension after Mounting: 634×549×108.5 mm
In The Box
Propeller Guard (set) × 1
Fits a DJI Mini 2, Two-Way Charging Hub, remote controller, and other small daily objects or products like DJI Pocket 2, Osmo Pocket and Osmo Action.
Product Description
Fits a DJI Mini 2, Two-Way Charging Hub, remote controller, and other small daily objects or products like DJI Pocket 2, Osmo Pocket and Osmo Action.
Compatibility: DJI Mini 2, Mavic Mini
The Two-Way Charging Hub can charge the remote controller and three batteries in sequence. It can also be used as a mobile power source.
Product Description
The Two-Way Charging Hub can charge the remote controller and three batteries in sequence. It can also be used as a mobile power source and store batteries for convenient carrying.
With the DJI 30W USB-C Charger, three DJI Mini 3 Pro Intelligent Flight Batteries can be fully charged in just three hours, greatly improving the charging efficiency.
Compatibility
DJI Mini 3 Pro
Product Specifications
Model: CHX162-30Recommended Charger: DJI 30W USB-C Charger or other USB Power Delivery chargersInput: 5 V, 3 A/9 V, 3 A/12 V, 3 AOutput (USB): 5 V, 2 AOperating Temperature Range: 5° to 40° C (41° to 104° F) Charging Time: Three Intelligent Flight Batteries can be fully charged in about three hours.
In The Box
Two-way Charging Hub × 1
Plug-and-play via the roll axis USB-C port with a quick reversible mount. It is fully compatible with all DJI OM magnetic clamps and the Magnetic Quick-Release Mount. Powered by on-device AI, it reduces reliance on smartphone performance and smoothly tracks people, cats, dogs, vehicles, or objects[1]. Features gesture control and a built-in fill light with 8 adjustable brightness and color temp levels for effortless solo vlogging.
1. Object Tracking via the Multifunctional Module 2 (excluding people/animals/vehicles): Requires manual box selection. Effective range varies based on object size. The object must have clear outlines, high contrast against the background, and occupy more than 10% of the frame.
Tips1. To charge your phone via the module, please use the official Phone Charging Cable. If lost, ensure you purchase a USB-C to USB-C cable that supports PD fast charging. Contact Support for details.2. If your phone uses a Lightning port, you will need to purchase the Phone Charging Cable (USB-C to Lightning) separately.
CompatibilityOsmo Mobile 8P
It can store and charge batteries. When used with the DJI 65W Portable Charger, it can fully charge 2 Intelligent Flight Batteries simultaneously in just 70 minutes. With at least one battery stored, it can serve as a power bank, using the remaining battery power to charge devices such as goggles or smartphones.
TipsThe number of batteries that can be charged simultaneously depends on the power of the charger used. Using a charger of 65 W or more allows for charging two batteries at once while using a charger of less than 65 W can only charge batteries one at a time. Refer to the charging protocols supported by the charger.
CompatibilityDJI Flip
PRODUCT SPECIFICATIONS
Input: 5-15 V, max 4.3 A Output (Charging): 5-15 V, max 3 A Charging Method: Charge 2 batteries simultaneously (with charger of 65 W or more)
IN THE BOX
DJI Flip Parallel Charging Hub × 1
It provides 18-minute flight time [1] to allow the drone to perform at least 20 palm takeoff and landing for excursions in succession. [2] Its lightweight design does not compromise battery life. Carry a few extra batteries to ensure you never miss a moment.
Measured in a controlled environment. Specific test conditions are as follows: flying forward at a constant speed of 2 m/s in a windless laboratory environment at 20 meters above sea level, in photo mode (without photo-taking operation during flight), and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version. 2. Measured after DJI Neo is activated, with a fully charged battery and default settings, and using Circle, Rocket, and Dronie modes, and is for reference only.
PRODUCT SPECIFICATIONS
Capacity: 1435 mAhWeight: Approx. 45 gNominal Voltage: 7.3 VMax Charging Voltage: 8.6 VBattery Type: Li-ionEnergy: 10.5 WhCharging Temperature: 5° to 40° C
Specially designed for the Mavic 3 Pro Series, the Storage Cover protects the gimbal and camera while storing the propellers, making it easy to access and store the drone.
Compatibility
DJI Mavic 3 ProDJI Mavic 3 Pro Cine
PRODUCT SPECIFICATIONS
Weight: 55.26 g
IN THE BOX
DJI Mavic 3 Pro Storage Cover × 1
FEATURES
Get more of the scene with the Wide-Angle Lens, expanding your field of view from 81.5° to 114° when taking photos and from 75° to 100° when recording videos (16:9).
CompatibilityDJI Mini 4 Pro
It can store and charge batteries. When used with the DJI 65W Portable Charger, it can fully charge three Intelligent Flight Batteries simultaneously in just 60 minutes.With at least one battery stored, it can serve as a power bank, using the remaining battery power to charge devices such as goggles or smartphones.
TipsThe number of batteries that can be charged simultaneously depends on the power of the charger used. Using a charger of more than 45 W allows for charging three batteries at once while using a charger of less than 45 W can only charge two batteries simultaneously. Refer to the charging protocols supported by the charger.
PRODUCT SPECIFICATIONS
Input: 5-20 V, max 3 A Output (Charging): 5 V, 2 A Charging Method: Charge three batteries simultaneously (with charger of more than 45 W)
FEATURES
The lightweight 360° Propeller Guard fully surrounds the propellers to avoid injury or damage and improve flight safety. It is especially useful for beginners flying indoors or in places with numerous obstacles.
Tips1. Before installing the propeller guard on DJI Mini 4 Pro, ensure that the aircraft firmware has been updated to v01.00.0100 or later. Otherwise, flight stability cannot be guaranteed.2. DJI Mini 4 Pro does not support obstacle avoidance after installing the propeller guard and cannot actively detour or brake when it senses an obstacle. When using intelligent features, the aircraft will not have obstacle avoidance capability.3. The aircraft will weigh more than 250 g after installing the propeller guard. Always carefully check and abide by local laws and regulations. If required, obtain the necessary approval and clearance from the related government agencies before flying.4. Do not use the Intelligent Flight Battery Plus after installing the propeller guard. Otherwise, the weight will overload the drone’s capacity, and flight safety cannot be guaranteed.
CompatibilityDJI Mini 4 Pro
PRODUCT SPECIFICATIONS
Weight (one side): 42 gRadius: 97 mmDimensions (after installation): 411.6×335×115 mm (L×W×H)
Easy Installation: No need to screw or unscrew the filters. Just snap them on or off with the magnetic QuickSwap system.
Reflection Reduction: A Circular Polarizing Filter (CPL) enriches your photography by intensifying color saturation, boosting contrast, and effectively eliminating unwanted reflections from glossy surfaces.
Gimbal-Friendly: The filters are designed to be lightweight and compatible with the Osmo Pocket 3 gimbal, ensuring smooth and stable footage.
Durable Coating: The filters are resistant to dust, scratches, oil, and water with a color-neutral coating that preserves the natural colors of your scenes.
Why UV? The sun’s emission of UV rays is significantly bad for your camera lens. Freewell UV filter is designed to absorb almost all ranges of UV rays to give more precise and sharper pictures with less haze. It also functions as a protective layer that shields the lens from dirt, dust, and scratches.
Optical Glass: German-made optical glass provides the best possible optics, surpassing or matching any other brand in the industry with color-neutral scratch-resistant, Waterproof, DustProof, and OilProof coating.
Installation: Remove the stock filter by twisting the counterclockwise before installing a new filter.
Gimbal Safe: Freewell's Gimbal Safe technology is designed to create filters for each drone that guarantee no adverse effects on the gimbal, ensuring maximum safety.
Provides 30W quick charging to one DJI Mini 3 Pro Intelligent Flight Battery in just 64 minutes.
30W fast charging, for only 64 mins to charge one DJI Mini 3 Pro Intelligent Flight Battery.
The charger does not include a power cable.
Compatibility
DJI Mini 3 ProDJI Mini 3 Pro Two-Way Charging HubDJI Mini SEDJI Mini 2DJI Mini 2 Two-way Charging HubDJI Charging Display BaseMavic MiniMavic Mini Two-way Charging HubMavic Mini Charging Base
Product Specifications
Input: 100 to 240 V, 0.8 A, 50/60 HzOutput: 5 V, 3 A/9 V, 3 A/12 V, 2.5 A/15 V, 2 A/3.3 to 11 V, 2.72 ADJI Mini 3 Pro Intelligent Flight Battery Charging Time: Approx. 64 mins (subject to temperature)DJI Mini 3 Pro Intelligent Flight Battery Plus Charging Time: Approx. 101 mins (subject to temperature)
In The Box
DJI 30W USB-C Charger (AU) × 1
The remote control hood protects the screen content of the mobile phone from sunlight in strong light conditions and provides a clear picture.
Product Description
The remote control hood protects the screen content of the mobile phone from sunlight in strong light conditions and provides a clear picture.
HIGHLIGHTS
Reduces sunlight interferenceReduces screen glare
COMPATIBILITY
Mavic Air 2
- Mini and Portable. This sun hood is smaller and lighter than other ones, while light blocking effects are better.- With soft silicone paneled corner, the sun hood will not affect your operation or cause any discomfort to your hands.- Full-screen Display. Won't block screen image and affect touchscreen operation.- Disassembly-free Bracket. Without removing the bracket, you can put controller in controller bag, combo bag and waterproof case.
Compatibility
DJI RC
