Overview
The Zignes solar panel leverages solar energy to eco-recharge the DJI Power-series power stations, with a single panel reaching a max charging output of 120 W.
Featuring a foldable design, it is convenient to store and transport, and comes with a stand for easy setup without the need for additional supports.
It includes a 3m extension cable, allowing users to freely position it in well-lit areas for flexible placement.
Designed with an IP65 rating for dust and water resistance, it accommodates a variety of everyday use scenarios.
Tips
Zignes 120W Solar Panel requires the use of a DJI Power Solar Panel Adapter Module (MPPT) or a DJI Power Car Power Outlet to SDC Power Cable (12V/24V)
for connection to the DJI Power-series power stations. Purchase the accessories as needed.
Each DJI Power Solar Panel Adapter Module (MPPT) can then connect to one to three solar panels, while the DJI Power Car Power Outlet to SDC Power Cable (12V/24V) can connect to one solar panel at most.
After-sales Service:
Return Period: 30 days (from the date of receipt of the package)
Exchange Period: 30 days (from the date of receipt of the package)
Warranty Period: 2 years (for EU regions);
1 year (for other regions)
* After-sales services are provided by DJI.
In The Box
Zignes 120W Solar Panel × 1
Specifications
Rated Power: 120 W
Open-circuit Voltage: Max 26 V
Short-circuit Current: Max 7 A
Weight: Approx. 5.6 kg
Unfolded Dimensions: 1365×580×36 mm (L×W×H)
Folded Dimensions: 365×580×70 mm (L×W×H)
Operating Temperature: -20° to 60° C (-4° to 140° F)
Compatibility
DJI Power Solar Panel Adapter Module (MPPT)
DJI Power Car Power Outlet to SDC Power Cable (12V/24V)
Overview
Designed for storing DJI Power 1000, it is convenient for single-handed carrying. The back has a dedicated space for cable management, which makes it user-friendly. Additionally, the left and right handles are equipped with venting openings. With the zipper opened, there's no need to remove the DJI Power 1000 from the case to operate it.
It also features a flip-up design at the panel location of DJI Power 1000, which covers the power ports to protect against accidental splashes and raindrops.
In The Box
DJI Power 1000 Protective Storage Bag × 1
Specifications
Dimensions: 452×240×232 mm (L×W×H)
Compatibility
DJI Power 1000
DJI Power 1000 V2
When a DJI Power-series power station is connected to the DJI Power Solar Panel Adapter Module (MPPT), users can link solar panels through the XT60 interface on the adapter panel for eco-friendly recharging of the DJI Power series. It is recommended to use the DJI Power-series power stations in conjunction with solar panels from the DJI-certified brand Zignes. If using solar panels from other brands, using the MPPT module and a conversion of the solar panel port to the XT60 interface are necessary to enable solar recharging for the DJI Power series.
* Required accessories are sold separately.
Tips
1. One MPPT module can connect to up to three solar panels.
2. To use solar panels not officially recommended by DJI, and to prevent damage to the MPPT module and the power station, ensure the open-circuit voltage of the solar panel is less than 30 V. The power output of each solar panel should not exceed 200 W, with the total output power of solar panels connected to the entire MPPT module capped at 400 W.
3. While using solar panels with the MPPT module, install the included metal heat dissipation bracket.
4. When used with the DJI Power 500, the max output power of the solar panels connected to the entire adapter module should not exceed 300 W.
In The Box
DJI Power Solar Panel Adapter Module (MPPT) × 1
Metal Heat Dissipation Bracket × 2
Ball-End Hex Key × 1
10mm Screw × 3
20mm Screw × 3
Specifications
Total Output:
Single Channel:
Max 200 W
Triple Channels:
Max 400 W (with DJI Power 1000)
Max 300 W (with DJI Power 500)
Input Voltage: 12-30 V, DC
Max Input Current:
Single Channel: 10 A
Triple Channels: 20 A
Operating Temperature: -10° to 45° C (41° to 113° F)
Compatibility
DJI Power 1000 V2
DJI Power 2000
DJI Power 1000
DJI Power 500
Overview
To connect car power outlet to SDC or SDC Lite port on a DJI Power-series power station for charging the latter after the car starts.
The accessory described comes in two parts: one XT60 to SDC Module, and one Car Power Outlet to XT60 Power Cable. The XT60 to SDC Module can also act as a solar panel adapter module (MPPT), suitable for connecting one Zignes 100W/120W Solar Panel.
In The Box
XT60 to SDC Module × 1
Car Power Outlet to XT60 Power Cable × 1
Specifications
Input specification: 12-30 V, DC
Max Output Power: 65 W
Operating Temperature: -10° to 45° C (14° to 113° F)
Compatibility
DJI Power 1000
DJI Power 500
Overview
With this cable, DJI Power-series power stations can achieve 12V DC output, suitable for connecting to model aircraft balance chargers or devices with XT60 connectors.
Tips
Actual appearance of certain accessories may vary.
In The Box
DJI Power SDC to XT60 Power Cable (12V) × 1
Specifications
Length: 40 cm
Compatibility
DJI Power 1000
DJI Power 500
Overview
With this cable, a DJI Power-series power station can convert SDC to a car charger plug, providing a 12V DC output to charge devices with car charger sockets, such as car refrigerators, car vacuum cleaners, and similar accessories.
Tips
Actual appearance of certain accessories may vary.
In The Box
DJI Power SDC to Car Charger Plug Power Cable (12V) × 1
Specifications
Length: 40 cm
Compatibility
DJI Power 1000
DJI Power 500
