CARE REFRESH IS A NON-REFUNDABLE AND NON-RETURNABLE ITEM, ONCE CODES HAVE BEEN SUPPLIED THEY CAN NOT BE RETURNED.   FEATURES Provides two replacement units for an additional charge as per the table below. The Care Refresh 1-year Plan lasts for one year from the date it is bound to your product, and covers for accidents such as water damage or collisions, letting you fly with peace of mind.   DJI Care Refresh 2-Year Plan ReplacementService Number of Replacements 4 Number of Flyaway Replacements 2 Replacement Fee $135.00 NZD Flyaway Replacement Fee $249.00 AUD Extended Warranty Period Official warranty is provided during the validity period Support Renewal? Renew 1-Year Plan once   Please Note: DJI Care Refresh can be bound to your DJI product when it meets one of the following criteria: Brand new and un-activated product. Aircraft or gimbal activated within the last 48 hours. Handheld device activated within the last 30 days. *If your craft has been activated for over 48 hours, follow the instructional guide linked below to verify your craft is in good working order and still eligible for DJI Care Refresh. Video Verification Guide Each time you request a replacement, you’ll receive a replacement unit that is new or equivalent to new in performance and reliability. If you have a DJI Care Refresh activation code, click here to bind it to your aircraft.     WATER DAMAGE COVERAGE We'll replace your aircraft if an accident occurs, even if it's damaged by water.    TWO REPLACEMENTS, TOTAL PEACE OF MIND For an additional charge, DJI Care Refresh offers up to two replacement units within one year and covers accidents such as water damage, crashes and collisions. These replacement units will be new or equivalent to new in performance and reliability.     DJI CARE REFRESH REPAIR PROCESS Ferntech will handle the entire DJI Care Refresh replacement process, which is as follows: Request a Care Refresh replacement via our online Service Request Form Delivery of damaged item* – please contact our helpful team at info@ferntech.co.nz and they will provide details on how to get your product to us. Product assessment by Ferntech team – upon completion, we will select the cheapest option to either have your product repaired or replaced under your DJI Care Refresh policy. Please advise if you would like to have your product replaced even if a repair is cheaper. *We require your product to complete the DJI Care Refresh process.   Please Note: DJI Care Refresh covers return shipping fees back to your address. DJI Care Refresh and the corresponding product must be purchased from New Zealand. DJI Care Refresh only supports aircraft purchased from official or authorised channels. Please find detailed terms and conditions under the warranty tab above. If you want to purchase DJI Care Refresh for an aircraft that has been activated for over 48 hours, follow this Video Verification Guide.     DJI FLYAWAY COVERAGE (DRONE NOT RECOVERED) Care Refresh offers 1x Flyaway Cover if your DJI Lito X1 is not recovered. To have Flyaway Cover active you need to bind your craft and remote controller to your DJI account by following this video. For any Flyaway case, you will need to lodge a Flyaway report through the DJI Fly application and then contact info@ferntech.co.nz. Flyaway Replacement Fees are charged in AUD, as claims are lodged through DJI’s application and paid directly to DJI in Australian dollars. Replacement aircraft should be arranged through the store where you purchased your Care Cover, with the replacement fee paid to your local store in NZD. The store will then facilitate the replacement of your aircraft.

Read more less

Provides a max flight time of 36 minutes*, giving you ample time to find the ideal angle, refine your composition, and bring back everything you need in a single takeoff. * Measured in a controlled wind tunnel environment under conditions equivalent to windless operation and sea-level altitude, with the aircraft flying forward at a constant speed of 21.6 kph, Obstacle Avoidance Action set to Brake, and the camera set to record at 1080p/24fps (but no active video recording), until a forced landing due to battery depletion. Actual experience may vary depending on the environment, usage, and firmware version.   CompatibilityDJI Lito 1 PRODUCT SPECIFICATIONS Model: BWXGN1-2590-7.32Capacity: 2788 mAhBattery Type: Li-ionCharging Temperature: 5° to 40° C (41° to 104° F)

Read more less

Provides a max flight time of 36 minutes*, giving you ample time to find the ideal angle, refine your composition, and bring back everything you need in a single takeoff. * Measured in a controlled wind tunnel environment under conditions equivalent to windless operation and sea-level altitude, with the aircraft flying forward at a constant speed of 21.6 kph, Obstacle Avoidance Action set to Brake, and the camera set to record at 1080p/24fps (but no active video recording), until a forced landing due to battery depletion. Actual experience may vary depending on the environment, usage, and firmware version.   CompatibilityDJI Lito X1   PRODUCT SPECIFICATIONS Model: BWXGP1-2788-7.0Capacity: 2788 mAhBattery Type: Li-ionCharging Temperature: 5° to 40° C (41° to 104° F)

Read more less

Provides a max flight time of 52 minutes*, allowing you to explore more of your surroundings and fly with peace of mind.* Measured in a controlled wind tunnel environment under conditions equivalent to windless operation and sea-level altitude, with the aircraft flying forward at a constant speed of 21.6 kph, Obstacle Avoidance Action set to Brake, and the camera set to record at 1080p/24fps (but no active video recording), until a forced landing due to battery depletion. Actual experience may vary depending on the environment, usage, and firmware version.   TipsRegulatory requirements vary by country or region. In the EU and UK, this Plus battery is only compliant for use with the aircraft from the DJI Lito X1 Fly More Combo Plus (DJI RC 2). Always check local laws and regulations before use.   CompatibilityDJI Lito X1DJI Lito 1 PRODUCT SPECIFICATIONS Model: BWXGP1-4680-7.16Capacity: 4680 mAhBattery Type: Li-ionCharging Temperature: 5° to 41° C (41° to 106° F)

Read more less

Supports power accumulation, transferring remaining power from multiple batteries to the one with the highest charge. Supports parallel charging of three batteries* when used with DJI 65W Portable Charger, fully charging 3 Intelligent Flight Batteries in about 87 minutes, and 3 Intelligent Flight Battery Plus in about 130 minutes*. * Parallel charging requires batteries of the same model and a PD-compatible charger with power output of 45 W or greater. During parallel charging, the two batteries with lower charge will first be sequentially charged to a level similar to the battery with the highest charge, after which all three batteries will be fully charged simultaneously.   TipsThe charger is not included.   CompatibilityDJI Lito X1 Intelligent Flight BatteryDJI Lito Series Intelligent Flight Battery Plus

Read more less

Supports power accumulation, transferring remaining power from multiple batteries to the one with the highest charge. Supports parallel charging of three batteries* when used with DJI 65W Portable Charger, fully charging 3 Intelligent Flight Batteries in about 87 minutes, and 3 Intelligent Flight Battery Plus in about 130 minutes*. * Parallel charging requires batteries of the same model and a PD-compatible charger with power output of 45 W or greater. During parallel charging, the two batteries with lower charge will first be sequentially charged to a level similar to the battery with the highest charge, after which all three batteries will be fully charged simultaneously.   TipsThe charger is not included.   CompatibilityDJI Lito X1 Intelligent Flight BatteryDJI Lito Series Intelligent Flight Battery Plus

Read more less

The lightweight DJI Lito Series 360° Propeller Guard can fully wrap the propellers to avoid injury or damage by obstacles, for improved flight safety. It helps beginners to fly more confidently indoors or in places with many obstacles.   Tips 1. Before installing the propeller guard on DJI Lito X1 or DJI Lito 1, ensure that the aircraft firmware has been updated to v01.00.0100 or later. Otherwise, flight stability cannot be guaranteed.2. The aircraft will weigh more than 250 g after installing the propeller guard. Please carefully check and abide by local laws and regulations. If required, obtain the necessary approval and clearance from the related government agencies before flight.3. Do not use the propeller guard in windy conditions.4. When flying with the propeller guard installed, the aircraft's power performance and video transmission performance will be affected. Please control the flight speed, operate with caution, and keep an eye on the video transmission signal strength in the app at all times. When using a remote controller, the maximum takeoff altitude is 1500 m, the maximum flight altitude is 120 m, and the maximum flight distance is 500 m.5. When flying with the propeller guard installed, the aircraft's obstacle sensing performance will be affected. Please fly in open areas whenever possible.6. Regulatory requirements vary by country or region. In the EU and UK, the propeller guards can only be compliantly used on the aircraft from DJI Lito X1 Fly More Combo Plus (DJI RC 2). However, in the EU and UK, do not install the propeller guards and the Intelligent Flight Battery Plus at the same time. Otherwise, the total aircraft weight may exceed the applicable regulatory weight limit and may result in operational requirements. Always check and comply with local laws and regulations before flight.   CompatibilityDJI Lito X1 DJI Lito 1

Read more less