The DJI FPV Remote Controller allows pilots to remotely adjust the parameters of each component. The DJI FPV Remote Controller also features 7ms low latency for a smooth flying experience Product Description The DJI FPV Remote Controller allows pilots to remotely adjust the parameters of each component. The DJI FPV Remote Controller also features 7ms low latency between remote controller and air unit for a smooth flying experience. Purchasing the DJI FPV Goggles and the DJI FPV Air Unit eliminates the need of any additional receiver. TIPS FOR USE It is recommended to use the USB adapter of DJI Goggles RE, Ronin-S, Spark or an FCC/CE certified USB adapter that supports Quick Charge 2.0.If you use the DJI FPV Goggles and the DJI FPV Remote Controller at the same time, you must first link the air unit and the goggles, and then link the remote controller. Product Specifications PRODUCT SPECIFICATIONS REMOTE CONTROLLER Weight: 765 gOperation Frequency: 5.725-5.850 GHzMax. Transmission Distance (Unobstructed,free of interference): FCC/SRRC: 4 km; CE: 0.7 kmTransmitter Power (EIRP): FCC: <30 dBm; CE: <14dBm; SRRC:<19dBmOperation Current/Voltage: 0.6 A @ 7.6 VOperation Temperature: 0° to 40°C (32° to 104°F)Charging Temperature: 5° to 40°C (41° to 104°F) REMOTE CONTROLLER INTELLIGENT BATTERY Battery Type: LiPo 2SCapacity: 4920 mAhVoltage: 7.6 VEnergy: 37.39 Wh In The Box IN THE BOX DJI FPV Remote Controller (including the battery) × 1
These small and lightweight DJI FPV Air Unit Antennas allows for long-distance transmittance. The antennas are built to last when used with the DJI FPV Air Unit. Product Description These small and lightweight DJI FPV Air Unit Antennas allows for long distance transmittance. The antennas are built to last when used with the DJI FPV Air Unit. LHCP antenna with MMCX joint, which is small and lightweight and ensures a long-distance transmission range and strong anti-interference. HIGHLIGHTS Long-distance transmission, small size, lightweight, and durable. TIPS FOR USE Keep the antennas of the air unit at least 40 mm apart. Keep the air unit away from metal objects or carbon fiber frames. Make sure to choose a position where the transmission will not be blocked during flight. The DJI FPV Air Unit is equipped with MMCX antenna ports. Since the port (the inner pin) is small, when pulling out the antenna, please hold the air unit with one hand, press the two ends of the antenna with the other hand, and remove it horizontally. Please note that dragging the antenna directly may cause the inner pin and the collar to fall off or get damaged.