Compact and portable, offering instant fill light. It delivers natural soft lighting for a beautifying effect in low-light or backlit scenes, making your selfies shine. It attaches magnetically to the gimbal and rotates in sync to ensure consistent lighting. Powered by Osmo Pocket 4, it supports in-camera control and offers three adjustable levels of color temperature and brightness. Delivers soft, even lighting with a professional high Color Rendering Index (CRI) suitable for various scenarios. Even in low light or backlight, it enables shooting at lower ISOs to capture evenly lit, soft, and clear portraits with minimal noise.   Tips1. When recording, maintain an appropriate distance between the fill light and the subject to avoid glare.2. Do not apply excessive force when adjusting the fill light, as this may loosen the clamp and cause a power disconnection.   CompatibilityOsmo Pocket 4

Read more less

Designed specifically for the Creator Combo, the Carrying Bag ensures convenient storage of your device and accessories.   CompatibilityOsmo Pocket 4Osmo Pocket 3

Read more less

The Battery Handle has a built-in 1080mAh battery, which can increase the operating time by approximately 62% when connected to Osmo Pocket 4. It supports hot swapping and comes with a USB-C port (USB 3.1 compliant) on the back that can be used to connect external audio devices, such as digital wired headphones, wired microphones, or wireless microphone receivers. The 1/4″ thread at the bottom can connect accessories like tripods, delivering an enhanced user experience. When recording 1080p/24fps video, Osmo Pocket 4 can record for up to 240 minutes* on a single charge. When used with the fully charged Battery Handle, the operating time can be extended by an additional 150 minutes*. * Tested at room temperature of 25° C (77° F) and 1080p/24fps (16:9), with Wi-Fi off and screen off.   Tips1. Osmo Pocket 4 Battery Handle and Osmo Pocket 3 Battery Handle can be used with either device for charging.2. Osmo Pocket 3 Battery Handle supports USB 2.0 only. When using it to connect Osmo Pocket 4 to a computer or phone for file transfer, the transfer speed will be limited to USB 2.0 standards.3. When Osmo Pocket 4 Battery Handle is connected to Osmo Pocket 3, the battery level of the handle cannot be displayed on the touchscreen.4. Due to differences in USB port standards, compatibility may be limited in scenarios involving data transmission, audio passthrough, and device wake-up features. For an optimal experience, it is recommended to use the corresponding Battery Handle.   CompatibilityOsmo Pocket 4Osmo Pocket 3 PRODUCT SPECIFICATIONS Capacity: 1080 mAhDimensions: 33.47×29.02×70.25 mm (L×W×H)Weight: 67.61 g IN THE BOX DJI Osmo Pocket 4 Battery Handle × 1

Read more less

The quick-release locking clip lets you wear the Osmo Action camera on your hand or wrist to take immersive POV shots or swiftly store the camera. The ball joint at the bottom of the locking clip can rotate 360° and tilt, allowing you to adjust the shooting angle and even get selfies during cycling. The hook-and-loop design allows you to adjust the size to fit your palm or wrist at any time for comfortable wearing. Use scenarios: Activities when your hands are occupied, such as swimming, surfing, water activities, rock climbing, skydiving etc.   CompatibilityOsmo 360Osmo NanoOsmo Action 6Osmo Action 5 ProOsmo Action 4Osmo Action 3 IN THE BOX Osmo Action 360° Wrist Strap × 1

Read more less

NOTE: FERNTECH AIM FOR AN AVERAGE TURNAROUND TIME ON CARE REFRESH CLAIMS OF 10 WORKING DAYS PLUS SHIPPING TIME, ONCE YOUR CLAIM HAS BEEN RECEIVED.CARE REFRESH IS A NON-REFUNDABLE AND NON-RETURNABLE ITEM, ONCE CODES HAVE BEEN SUPPLIED THEY CAN NOT BE RETURNED.   FEATURES Provides two replacement units for an additional charge as per the table below. The Care Refresh 1-year Plan lasts for one year from the date it is bound to your product, and covers for accidents such as water damage, natural wear, or cracking and deformation, letting you fly with peace of mind.   DJI Care Refresh 1-Year Plan ReplacementService Number of Replacements 2 Replacement Fee $120.00 Extended Warranty Period Official warranty is provided during the validity period Support Renewal? Renew 1-Year Plan up to twice   Please Note: DJI Care Refresh can be bound to your DJI product when it meets one of the following criteria: Brand new and un-activated product. Handheld device activated within the last 30 days. *If your device has been activated for over 30 days, follow the instructional guide linked below to verify your device is in good working order and still eligible for DJI Care Refresh. Video Verification Guide Each time you request a replacement, you’ll receive a replacement unit that is new or equivalent to new in performance and reliability. If you have a DJI Care Refresh activation code, click here to bind it to your device.     WATER DAMAGE COVERAGE We'll replace your device if an accident occurs, even if it's damaged by water.    FOUR REPLACEMENTS, TOTAL PEACE OF MIND For an additional charge, DJI Care Refresh offers up to four replacement units within two years and covers accidents such as water damage, natural wear, or cracking and deformation. These replacement units will be new or equivalent to new in performance and reliability.     DJI CARE REFRESH REPAIR PROCESS Ferntech will handle the entire DJI Care Refresh replacement process, which is as follows: Request a Care Refresh replacement via our online Service Request Form Delivery of damaged item* – please contact our helpful team at info@ferntech.co.nz and they will provide details on how to get your product to us. Product assessment by Ferntech team – upon completion, we will select the cheapest option to either have your product repaired or replaced under your DJI Care Refresh policy. Please advise if you would like to have your product replaced even if a repair is cheaper. *We require your product to complete the DJI Care Refresh process.   Please Note: DJI Care Refresh covers return shipping fees back to your address. DJI Care Refresh and the corresponding product must be purchased from New Zealand. DJI Care Refresh only supports devices purchased from official or authorised channels. If you want to purchase DJI Care Refresh for a device that has been activated for over 30 days, follow this Video Verification Guide.

Read more less

NOTE: FERNTECH AIM FOR AN AVERAGE TURNAROUND TIME ON CARE REFRESH CLAIMS OF 10 WORKING DAYS PLUS SHIPPING TIME, ONCE YOUR CLAIM HAS BEEN RECEIVED.CARE REFRESH IS A NON-REFUNDABLE AND NON-RETURNABLE ITEM, ONCE CODES HAVE BEEN SUPPLIED THEY CAN NOT BE RETURNED.   FEATURES Provides four replacement units for an additional charge as per the table below. The Care Refresh 2-year Plan lasts for two years from the date it is bound to your product, and covers for accidents such as water damage, natural wear, or cracking and deformation, letting you fly with peace of mind.   DJI Care Refresh 2-Year Plan ReplacementService Number of Replacements 4 Replacement Fee $120.00 Extended Warranty Period Official warranty is provided during the validity period Support Renewal? Renew 1-Year Plan once   Please Note: DJI Care Refresh can be bound to your DJI product when it meets one of the following criteria: Brand new and un-activated product. Handheld device activated within the last 30 days. *If your device has been activated for over 30 days, follow the instructional guide linked below to verify your device is in good working order and still eligible for DJI Care Refresh. Video Verification Guide Each time you request a replacement, you’ll receive a replacement unit that is new or equivalent to new in performance and reliability. If you have a DJI Care Refresh activation code, click here to bind it to your device.     WATER DAMAGE COVERAGE We'll replace your device if an accident occurs, even if it's damaged by water.    FOUR REPLACEMENTS, TOTAL PEACE OF MIND For an additional charge, DJI Care Refresh offers up to four replacement units within two years and covers accidents such as water damage, natural wear, or cracking and deformation. These replacement units will be new or equivalent to new in performance and reliability.     DJI CARE REFRESH REPAIR PROCESS Ferntech will handle the entire DJI Care Refresh replacement process, which is as follows: Request a Care Refresh replacement via our online Service Request Form Delivery of damaged item* – please contact our helpful team at info@ferntech.co.nz and they will provide details on how to get your product to us. Product assessment by Ferntech team – upon completion, we will select the cheapest option to either have your product repaired or replaced under your DJI Care Refresh policy. Please advise if you would like to have your product replaced even if a repair is cheaper. *We require your product to complete the DJI Care Refresh process.   Please Note: DJI Care Refresh covers return shipping fees back to your address. DJI Care Refresh and the corresponding product must be purchased from New Zealand. DJI Care Refresh only supports devices purchased from official or authorised channels. If you want to purchase DJI Care Refresh for a device that has been activated for over 30 days, follow this Video Verification Guide.

Read more less

Transform HERO13 Black into the ultimate cinematic camera The premium HB-Series Anamorphic Lens Mod is the easiest way for cinematographers and creators of all levels to capture cinematic, ultra wide-angle footage with reduced distortion. The camera and lens do all the work—you’ll get the anamorphic look you want without needing to know how to do it in post-production. It lets anyone tell their stories using the 21:9 aspect ratio used in feature films, and cinematic lens flares add to the pro quality of your footage. Simply attach the lens, and your camera will adjust its settings accordingly. Durable and scratch-resistant, the lens is waterproof1 when installed. Product Details Includes Anamorphic Lens Mod, front and rear protective caps and microfiber lens cloth Captures cinematic footage in an ultra wide-angle 21:9 aspect ratio—ideal for static shots and stabilized gimbal footage of low impact/vibration activities² Horizontal lens flares add the professional touch of feature films to your footage In-camera “de-squeezing” streamlines editing by eliminating the need to de-squeeze footage in post-production HERO13 Black automatically recognizes the lens when attached and switches into anamorphic mode; when removed, the camera returns to its standard settings Scratch-resistant and waterproof¹ when mounted on the camera; also has a hydrophobic lens coating that repels water Supported by HyperSmooth video stabilization; use with a gimbal for even smoother, more cinematic results Easy to attach, with no tools needed Part of the high-performance HB-Series Lens collection—exclusively for HERO13 Black Includes GoPro’s Limited Lifetime Warranty

Read more less

TRUE 8K 360 VIDEO MAX2 delivers True 8K, resulting in up to 21% more resolution than the competition. This means sharper detail and unmatched image quality you only get from GoPro. MAX2 NEVER MISSES 360 video captures everything around you-just record and pick the best angles later in the app. You never have to aim, but always get the shot. GET THE SHOT. NOT THE POLE. Capture those incredible invisible selfies, third-person drone-like footage and more iconic 360 shots. THE ONLY 360 CAM BUILT FOR THIS MAX2 is the toughest, most versatile 360 camera because it's a GoPro. It thrives in high speeds, water, dirt, snow, and is built to perform in any environment. TWIST-AND-GO REPLACEABLE LENSES MAX2 replaceable lenses are made from super-strong optical glass, making them tough and difficult to break. And if they ever do get damaged, you won't have to replace the entire camera-just swap lenses and get back to the action. SUPER SLO-MO IN 360 Slow the action way down with amazing 4K100 spherical video (that's 3X slo-mo). Or go with a higher-resolution 5.6K60-up to 2X slow motion. 10-BIT COLOR IN 8K + 300MBPS + GP-LOG Capture over 1 billion colors in 8K, delivering a more realistic image with true-to-the-eye colors, and up to 300Mbps bitrate with GoPro Labs-the highest on any consumer 360 camera. And pro-users can use GP-Log Encoding with LUT. EPIC 29MP 360° PHOTOS Get ultra high-res 360° photos and legendary GoPro point-of-view shots. You'll have the flexibility to crop, zoom and Reframe for the exact look you want in the Quik app. TURN 360 FOOTAGE INTO RAD VIDEOS FROM THE CLOUD Editing 360 footage is called Reframing, and the creative possibilities are endless. It's super easy to pick the shots you want. Then track objects, add dynamic movements and transitions, even use multiple Reframe modes in the same clip-all with just a few taps. FREESTYLE YOUR EDITS With MotionFrame, simply move your phone within 360 footage to find the best angles. KEYFRAMES Easily select your field of view at specific moments in time, and transitions are automatically generated between them. CAMERAFX Make your videos more exhilarating than ever with CameraFX. These let you easily add pro-level motion with effects like Spin, Flip, Roll, Wobble, Tiny Planet and more. EASY POV + SELFIE MODES The easiest way to get GoPro's world-famous, immersive POV and selfies. The camera automatically shows you a front-facing 180° view, or the reverse angle for an awesome third-person selfie.* 180° IN 4K60 Get super wide, immersive POV shots from the front or back lens with the Max HyperView digital lens. It delivers a 180° field of view in stunning 4K60. 4 other digital lenses are available with 4K60, too-Linear, Wide, Ultra Wide and Max SuperView. SAY GOODBYE TO SHAKY VIDEOS Max HyperSmooth is our most powerful video stabilization, delivering maximum smoothness in the roughest conditions. And 360 Horizon Lock keeps all your shots level, whether you're spinning, flipping or chasing your kids. IMMERSIVE AUDIO + PRECISE CONTROL When shooting 360, the 6-microphone array captures clean stereo audio from all around you + reduces wind noise for the best sound quality ever in a GoPro. In Single Lens Mode, you can automatically match stereo audio width to your video field of view, or manually select Front, Back, or Match Lens options for precise control over where your audio is captured. 29 MILLION PIXELS Two powerful image sensors combine with premium stitch quality to deliver 29 million pixels-and true 8K resolution of your 360 video. Specifications Design + Dimensions Video Modes 360: Video, POV, Selfie, LoopingSingle-Lens: Video Dimensions (W x H x D) (mm) (W) 64.0mm x (H) 69.7mm x (D) 48.7mm Weight (Camera w/mounting fingers + Battery) 195g Replaceable Lenses Yes (Change in Field) Battery 1960mAh Enduro Battery Rugged + Waterproof 5m (16-ft.) Mounting Built-In Mounting with Folding Fingers¼-20 MountMagnetic Latch Mount (compatible) Memory Storage microSD 1x microSD™ rated class A2 V30 or higher Connector USB-C (3.0) Operating Temperature -10º C - 35º C Image Quality / Hardware Spec Image Sensor 1/2.3" Lens Aperture F1.8 35mm Equivalent Focal Length Min = 14mmMax = 26mm Video Video Modes 360: Video, POV, Selfie, LoopingSingle-Lens: Video Video Resolutions & Frame Rates 360:8K: (7680x3840) @ 30/25/24 fps5.6K: (5376x2688) @ 60/50/30/25 fps4K: (3328x1664) @ 100/90/60/50 fpsSingle-Lens:4K: (16:9) (3840x2160) @ 60/50/30/25/24 fps4K: (9:16) (2160x3840) @ 60/50/30/25/24 fps4K: (4:3) (4000x3000) @ 60/50/30/25/24 fps1080p: (16:9) (1920x1080) @ 60/50 fps1080p: (9:16) (1080x1920) @ 60/50 fps POV & Selfie Modes 360:8K: @ 30/25/24 fps5.6K: @ 60/50/30/25 fps4K: @ 100/90/60/50 fps Slo-Mo 3x - 4K100 Video Stabilization Max HyperSmooth with 360° Horizon Lock Aspect Ratio 16:9 9:16 4:3 Digital Lenses Max HyperView (16:9 only)Max SuperView (16:9 only)Ultra WideWideLinear Color Video Bit Depth 8-bit10-bit Log Encoding GP-Log with LUT Maximum Video Bit Rate 120Mbps Video Compression Standard H.265 (HEVC) Video Format 360: .360Single-Lens: .MP4 Lens Priority Exposure and Control Yes Photo Photo Modes 360: Photo, Burst Photo, Night PhotoSingle-Lens: Photo Photo Resolution 360: 29MP (7680x3840)Single-Lens: 12MP (4000x3000) Photo Frame-Grabs from Video Up to 12MP from 4K (4:3) Video Photo Output Standard, RAW (Single Lens) Photo Formats .36P.JPG.GPR Photo Aspect Ratio 4:3 Digital Lenses (single photo) Ultra WideWideLinear Burst Photo Rates (Frames / Second) 360: 29MP Photos @ 5/1, 10/1, 10/3; 30/3, 30/6 Night Photo Shutter Speed Auto, 2, 5, 10, 15, 20, 30 sec. Lens Priority Exposure and Control Yes Time Lapse Time Lapse Modes 360: TimeWarp, Time Lapse, Night Lapse, Star Trails, Light Painting, Vehicle LightsSingle-Lens: TimeWarp TimeWarp Video 360: 8K30; 5.6K30Single-Lens: 4K30, 1080p30 Time Lapse Video 360: 8K30; 5.6K30 Night Lapse Video 360: 8K30; 5.6K30 Star Trails, Light Painting, Vehicle Lights 360: 8K30; 5.6K30 Advanced Image Settings Shutter Speeds Video: 1/7680 - to the limit of frames per secondPhoto: Auto, 1/125 - 1/2000 EV Comp 2+/- White Balance 2300K - 6500K ISO Range Video: 100-6400Photo: 100-3200Night: 100-800 Color Profiles Natural, Vibrant, Flat Audio Features Audio Modes 360 AudioStereo Wind Noise Reduction Yes Directional Audio Yes - based on digital lens selection Microphones 6-microphones RAW Audio Capture WAV Format (Single Lens mode) Wireless Audio Yes Connected Features Wi-Fi Frequency Wi-Fi 6; 2.4GHZ; 5GHz Wi-Fi Protocol 802.11 a/b/g/n/ac Bluetooth BLE 5.3 GPS Yes USB Port USB-C (3.0) Auto Upload to Cloud w/GoPro Subscription Camera Features QuickCapture Yes Voice Control 13 Commands11 Languages with 6 accents Scheduled Capture w/Duration Yes Timecode Synchronization Yes Everything In The Box GoPro MAX2 Camera 360 video captures everything around you 2 Protective Lens Caps Protects the lenses when your camera is not in use Curved Adhesive Mount Attach your GoPro to curved surfaces Enduro Battery High-capacity battery for MAX Microfiber Lens Cleaning Cloth High-quality microfiber pouch for storing + cleaning Thumbscrew Secures camera to Mounting Buckle Short Mounting Buckle Connect your GoPro to mounts USB-C Cable Camera charging cord Stickers (4x) Rep the radness

Read more less

Includes ND 8/16/32 filters that are suitable for capturing sports at noon or in other brightly lit scenarios. By reducing light intake, you can use a lower shutter speed even in bright conditions, enhancing motion blur for a more striking visual effect.   TipsWhen mounting the ND Filter, ensure the orange rubber ring inside is properly fitted into the groove for a secure attachment. IN THE BOX Osmo Nano ND8 Filter × 1Osmo Nano ND16 Filter × 1Osmo Nano ND32 Filter × 1Osmo Nano ND Filter Case × 1

Read more less

Made from high-strength glass, this cover is both drop-resistant and scratch-proof, effectively safeguarding the lens. The external AF coating is hydrophobic, allowing water droplets to slide off quickly.   TipsWhen mounting the Glass Lens Cover, ensure the orange rubber ring inside is properly fitted into the groove for a secure attachment.

Read more less

The vacuum suction cup and ball-joint design let you securely mount the camera on smooth surfaces like glass or tiles, with easy angle adjustments for creative shots. The base also includes a 1/4" threaded hole, allowing you to connect more accessories and unlock even more creative possibilities.   TipsEnsure the attachment surface is clean and smooth.

Read more less

4CARE REFRESH IS A NON-REFUNDABLE AND NON-RETURNABLE ITEM, ONCE CODES HAVE BEEN SUPPLIED THEY CAN NOT BE RETURNED.   FEATURES Provides two replacement units for an additional charge as per the table below. The Care Refresh 1-year Plan lasts for one year from the date it is bound to your product, and covers for accidents such as water damage, natural wear, or cracking and deformation, letting you fly with peace of mind.   DJI Care Refresh 1-Year Plan ReplacementService Number of Replacements 2 Replacement Fee $79.00 Extended Warranty Period Official warranty is provided during the validity period Support Renewal? Renew 1-Year Plan up to twice   Please Note: DJI Care Refresh can be bound to your DJI product when it meets one of the following criteria: Brand new and un-activated product. Handheld device activated within the last 30 days. *If your device has been activated for over 30 days, follow the instructional guide linked below to verify your device is in good working order and still eligible for DJI Care Refresh. Video Verification Guide Each time you request a replacement, you’ll receive a replacement unit that is new or equivalent to new in performance and reliability. If you have a DJI Care Refresh activation code, click here to bind it to your device.     WATER DAMAGE COVERAGE We'll replace your device if an accident occurs, even if it's damaged by water.    TWO REPLACEMENTS, TOTAL PEACE OF MIND For an additional charge, DJI Care Refresh offers up to two replacement units within one year and covers accidents such as water damage, natural wear or cracking and deformation. These replacement units will be new or equivalent to new in performance and reliability.     DJI CARE REFRESH REPAIR PROCESS Ferntech will handle the entire DJI Care Refresh replacement process, which is as follows: Request a Care Refresh replacement via our online Service Request Form Delivery of damaged item* – please contact our helpful team at info@ferntech.co.nz and they will provide details on how to get your product to us. Product assessment by Ferntech team – upon completion, we will select the cheapest option to either have your product repaired or replaced under your DJI Care Refresh policy. Please advise if you would like to have your product replaced even if a repair is cheaper. *We require your product to complete the DJI Care Refresh process.   Please Note: DJI Care Refresh covers return shipping fees back to your address. DJI Care Refresh and the corresponding product must be purchased from New Zealand. DJI Care Refresh only supports devices purchased from official or authorised channels. If you want to purchase DJI Care Refresh for a device that has been activated for over 30 days, follow this Video Verification Guide.

Read more less

CARE REFRESH IS A NON-REFUNDABLE AND NON-RETURNABLE ITEM, ONCE CODES HAVE BEEN SUPPLIED THEY CAN NOT BE RETURNED.   FEATURES Provides two replacement units for an additional charge as per the table below. The Care Refresh 1-year Plan lasts for one year from the date it is bound to your product, and covers for accidents such as water damage, natural wear, or cracking and deformation, letting you fly with peace of mind.   DJI Care Refresh 1-Year Plan ReplacementService Number of Replacements 2 Replacement Fee $79.00 Extended Warranty Period Official warranty is provided during the validity period Support Renewal? Renew 1-Year Plan up to twice   Please Note: DJI Care Refresh can be bound to your DJI product when it meets one of the following criteria: Brand new and un-activated product. Handheld device activated within the last 30 days. *If your device has been activated for over 30 days, follow the instructional guide linked below to verify your device is in good working order and still eligible for DJI Care Refresh. Video Verification Guide Each time you request a replacement, you’ll receive a replacement unit that is new or equivalent to new in performance and reliability. If you have a DJI Care Refresh activation code, click here to bind it to your device.     WATER DAMAGE COVERAGE We'll replace your device if an accident occurs, even if it's damaged by water.    TWO REPLACEMENTS, TOTAL PEACE OF MIND For an additional charge, DJI Care Refresh offers up to two replacement units within one year and covers accidents such as water damage, natural wear or cracking and deformation. These replacement units will be new or equivalent to new in performance and reliability.     DJI CARE REFRESH REPAIR PROCESS Ferntech will handle the entire DJI Care Refresh replacement process, which is as follows: Request a Care Refresh replacement via our online Service Request Form Delivery of damaged item* – please contact our helpful team at info@ferntech.co.nz and they will provide details on how to get your product to us. Product assessment by Ferntech team – upon completion, we will select the cheapest option to either have your product repaired or replaced under your DJI Care Refresh policy. Please advise if you would like to have your product replaced even if a repair is cheaper. *We require your product to complete the DJI Care Refresh process.   Please Note: DJI Care Refresh covers return shipping fees back to your address. DJI Care Refresh and the corresponding product must be purchased from New Zealand. DJI Care Refresh only supports devices purchased from official or authorised channels. If you want to purchase DJI Care Refresh for a device that has been activated for over 30 days, follow this Video Verification Guide.

Read more less

Quick to tighten and built to last, this clamp pairs with the Motorcycle Heavy-Duty Mount* and High-Strength Carbon Fiber Invisible Selfie Stick* for secure, stable third-person motorcycling shots. One end easily converts to a 1/4" thread hole for added versatility. * Sold separately.   TipsFor third-person motorcycling shots, use with the Osmo 1m High-Strength Carbon Fiber Invisible Selfie Stick*. * Sold separately.   CompatibilityOsmo 360Osmo Action 3Osmo Action 4Osmo Action 5 Pro PRODUCT SPECIFICATIONS Dimensions: Approx. 220 × 90 × 37 mm (L × W × H)Weight: Approx. 305 g IN THE BOX Osmo Dual Heavy-Duty Clamp × 1Osmo Locking Screw × 1Ball Head to Two-Prong Adapter × 1Ball Head to 1/4" Thread Adapter × 1

Read more less

When used with Osmo 360, it offers special side-tracking views reminiscent of drone footage, making it easy to capture spectacular 360° footage. Made of high-strength carbon fiber, it's both lightweight and durable—reliable even during intense action.   TipsBefore storing the selfie stick, ensure that sand and other foreign objects are removed from the surface. If the selfie stick comes into contact with seawater, rinse it with fresh water and dry it thoroughly before storing.   CompatibilityOsmo 360 PRODUCT SPECIFICATIONS Dimensions (folded): Length approx. 402 mm, diameter approx. 41 mmDimensions (unfolded): Length approx. 2500 mm, diameter approx. 41 mmWeight: Approx. 428 g IN THE BOX Osmo 2.5m Extended Carbon Fiber Selfie Stick × 1

Read more less

Specifically designed for stationary 360° shots, this tripod selfie stick captures expansive scenes from optimal angles with rock-solid stability. Its lightweight yet durable build unfolds quickly *, ensuring a smooth and efficient shooting experience. * Suitable for stable, level surfaces in windless environments. Do not use while in motion.   Tips1. Be careful to avoid pinching your fingers when folding the tripod. 2. Ensure the tripod is placed on a stable, windless surface during use. 3. Before storing the selfie stick, make sure to remove any sand or debris from the surface. If the selfie stick comes into contact with seawater, rinse it with fresh water and dry it thoroughly before storing.   CompatibilityOsmo 360 PRODUCT SPECIFICATIONS Dimensions (Folded): Length approx. 347 mm, Diameter approx. 38 mmDimensions (Unfolded): Length approx. 1600 mm, Diameter approx. 502 mmWeight: Approx. 378 g IN THE BOX Osmo 1.6m Tripod Selfie Stick × 1

Read more less

When used with Osmo 360, the selfie stick disappears from the shot, enabling a dramatic third-person perspective *; it extends up to 1.2 meters, offering a wider field of view. Equipped with an adjustable quick-release adapter mount, it supports fast angle adjustments, achieving either the invisible selfie stick effect or precise single-lens framing. * Recommended for handheld use only. Do not use in environments with strong vibrations. For vehicle-mounted applications (e.g., motorcycles or cars), use the High-Strength Carbon Fiber Invisible Selfie Stick together with the appropriate stabilizing accessories.   TipsBefore storing the selfie stick, ensure that sand and other foreign objects are removed from the surface. If the selfie stick comes into contact with seawater, rinse it with fresh water and dry it thoroughly before storing.   CompatibilityOsmo 360 PRODUCT SPECIFICATIONS Osmo 1.2m Invisible Selfie StickDimensions (Folded): Length approx. 251 mm, diameter approx. 24 mmDimensions (Unfolded): Length approx. 1200 mm, diameter approx. 24 mmWeight: Approx. 137 g Osmo Adjustable Quick-Release Adapter MountDimensions: Approx. 41 × 22 × 32 mm (L × W × H)Weight: Approx. 27 g IN THE BOX Osmo 1.2m Invisible Selfie Stick × 1Osmo Adjustable Quick-Release Adapter Mount × 1

Read more less

When used with Osmo 360, the selfie stick disappears from the shot, enabling a dramatic third-person perspective. Made of high-strength carbon fiber, it's both lightweight and durable—reliable even during intense action.   TipsBefore storing the selfie stick, ensure that sand and other foreign objects are removed from the surface. If the selfie stick comes into contact with seawater, rinse it with fresh water and dry it thoroughly before storing.   CompatibilityOsmo 360 PRODUCT SPECIFICATIONS Dimensions (Folded): Length approx. 278 mm, diameter approx. 27 mmDimensions (Unfolded): Length approx. 1000 mm, diameter approx. 27 mmWeight: Approx. 157 g IN THE BOX Osmo 1m High-Strength Carbon Fiber Invisible Selfie Stick × 1

Read more less

When used with Osmo 360, the selfie stick disappears from the shot, enabling a dramatic third-person perspective *. Its lightweight design folds down to palm size, making it easy to carry anywhere. * Recommended for handheld use only. Do not use in environments with strong vibrations. For vehicle-mounted applications (e.g., motorcycles or cars), use the High-Strength Carbon Fiber Invisible Selfie Stick together with the appropriate stabilizing accessories.   TipsBefore storing the selfie stick, ensure that sand and other foreign objects are removed from the surface. If the selfie stick comes into contact with seawater, rinse it with fresh water and dry it thoroughly before storing.   CompatibilityOsmo 360 PRODUCT SPECIFICATIONS Dimensions (Folded): Approx. 181 mm in length, Approx. 24 mm in diameterDimensions (Unfolded): Length approx. 700 mm, diameter approx. 24 mmWeight: Approx. 101 g IN THE BOX Osmo 70cm Invisible Selfie Stick × 1

Read more less

The curved base fits snugly against the helmet and adheres firmly to stay in place. Paired with a high-strength carbon fiber straight rod, it enables a distinctive third-person tracking perspective.   Tips1. When attaching the base, press firmly for more than 30 seconds, and let it sit for 30 minutes to ensure adhesion. 2. This product is intended for one-time use on clean, curved surfaces only. If the surface is not sufficiently smooth, apply the included adhesive pad first, then attach the base. 3. The ideal application temperature is between -10°C and 40°C (14° F to 104° F). 4. After wearing, be sure to tighten the locking nut to prevent shaking or displacement due to significant bumps during movement. 5. While capturing 360° shots, The bottom of the camera facing the helmet may be closer than the minimum required stitching distance. Adjust the angle and composition to avoid close-range stitching flaws at the bottom.   CompatibilityOsmo 360 PRODUCT SPECIFICATIONS Osmo Curved Adhesive Base MaxDimensions: Approx. 50 × 55 × 24 mm (L × W × H)Weight: Approx. 17 g Hex KeyDimensions: Approx. 53 × 97 × 16 mm (L × W × H)Weight: Approx. 8 g 28cm Carbon Fiber Straight RodDimensions: Approx. 291 × 17 × 23 mm (L × W × H)Weight: Approx. 45 g Osmo Locking ScrewDimensions: Approx. 13.3 × 23 × 55.6 mm (L × W × H)Weight: Approx. 12 g 1/4'' Thread to Two-Prong AdapterDimensions: Approx. 32×18×18 mm (L×W×H)Weight: Approx. 9 g Osmo Action Quick-Release Adapter MountDimensions: Approx. 41×21×34 mm (L×W×H)Weight: 16 g IN THE BOX Osmo Curved Adhesive Base Max × 128 cm Carbon Fiber Straight Rod × 11/4" Thread to Dual Prong Adapter × 1Osmo Action Quick-Release Adapter Mount × 1Osmo Locking Screw × 1Screw Locking Wrench × 1Hex Key × 1

Read more less

It uses a unique silica gel material that is comfortable to wear and can reshape freely, allowing you to take FPV footage easily. Larger size design for more comfortable wear, paired with a strap for added stability.   Tips Use caution when participating in certain extreme sports like rock climbing and diving. Ensure that no foreign objects get caught around your neck to avoid the risk of suffocation.   CompatibilityOsmo 360Osmo Action 5 ProOsmo Action 4Osmo Action 3Osmo Action PRODUCT SPECIFICATIONS Osmo Hanging Neck Mount MaxDimensions: Approx. 260 × 185 × 50 mm (L × W × H)Hose Length: Approx. 560 mmWeight: Approx. 165 g Osmo Locking ScrewDimensions: Approx. 13.3 × 23 × 55.6 mm (L × W × H)Weight: Approx. 12 g IN THE BOX Osmo Hanging Neck Mount Max × 1Chest Strap × 1Osmo Locking Screw × 1

Read more less

Specifically designed for Osmo 360, it fits securely to the lens, providing effective protection for more peace of mind when filming in extreme conditions. Multi-layer coated glass and professional optical design minimize image quality loss, ensuring your 360° shots remain clear and vibrant.   Tips Specifically designed for Osmo 360, it fits securely to the lens, providing effective protection for more peace of mind when filming in extreme conditions. Multi-layer coated glass and professional optical design minimize image quality loss, ensuring your 360° shots remain clear and vibrant.   CompatibilityOsmo 360 PRODUCT SPECIFICATIONS Dimensions: Approx. 38 × 18.5 × 41 mm (L × W × H)Weight: Approx. 4 g (2 pieces) IN THE BOX Osmo 360 Transparent Lens Protector × 2Osmo Lens Cleaning Cloth × 1

Read more less

Featuring a magnetic quick-release design, this mount ensures a secure and reliable connection with the camera. It is compatible with 1/4" threaded invisible selfie sticks for easy installation*. The adjustable tilt makes it easy to fine-tune the camera angle for more accurate single-lens framing. * The Osmo 360 Standard Combo does not include an Invisible Selfie Stick, which can be purchased separately.   Tips 1. When using the invisible selfie stick feature, adjust the adapter to the 0° position to ensure the selfie stick and camera are aligned in the horizontal direction. 2. When using with other 1/4" accessories, be sure to tighten the threads to prevent accessories from loosening or falling due to vibration. PRODUCT SPECIFICATIONS Dimensions: Approx. 41 × 22 × 32 mm (L × W × H)Weight: Approx. 27 gJoint Angle (two stops): 0°, 68° IN THE BOX Osmo Adjustable Quick-Release Adapter Mount × 1

Read more less

Crafted from full-metal materials, this rugged mount ensures a secure, reliable hold for your camera—even during intense vibrations *. It supports quick angle adjustments for flexible and dynamic shooting perspectives. * When mounting on a vehicle for third-person perspective shots, always use it with the Dual Heavy-Duty Clamp and the High-Strength Carbon Fiber Invisible Selfie Stick.   Tips Ensure all connection points are securely tightened to prevent the camera from detaching due to prolonged high-frequency vibrations.   Compatibility Osmo 360 PRODUCT SPECIFICATIONS Dimensions: Approx. 115 × 64 × 50 mm (L × W × H)Weight: Approx. 202 g IN THE BOX Osmo Motorcycle Heavy-Duty Mount × 1 Rubber Spacers × 1 Hex Key × 1

Read more less