FEATURES
The lower quick-release plate features a scale on both sides and a serrated slot design on the bottom. This complements the fine-tuning knob on the gimbal's tilt axis, allowing cinematographers to perform precise, millimeter-level adjustments when changing cameras or lenses. It also facilitates a swift transition between tripods and stabilizers for the camera.
CompatibilityDJI RS 4 ProDJI RS 4DJI RS 3 ProDJI RS 3DJI RS 2
PRODUCT SPECIFICATIONS
Weight: 80 gDimensions: 129.6×49.5×22 mm (L×W×H)
The motor speed has increased by 30% for more responsive control over focus, zoom, and aperture. The motor is compatible with 15mm universal rods. The latency is as low as 10 milliseconds, ensuring swift control response when paired with the DJI Focus Pro Hand Unit. The motor features a built-in RF antenna that allows for linking with the DJI Focus Pro Hand Unit. When paired with the DJI Focus Pro Grip, the grip can power the motor via the USB-C port.
Tips
The motor can be powered through third-party devices. Do not use an extra device to power the DJI Focus Pro Motor when it is already powered (e.g., by the DJI Focus Pro Grip), as this may cause device damage.
DJI RS 4 Pro can be used with up to two motors simultaneously, while DJI RS 4 only supports one motor.
In The Box
Focus Pro Motor × 1
Motor Rod Mount Kit × 1
Focus Gear Strip × 1
Multi-Camera Control Cable (USB-C, 30 cm) × 1
FIZ Sticker × 1
15mm Rod × 1
10mm 1/4"-20 Screw × 2
Specifications
2.4GHz Transmitter Power (EIRP): < 20 dBm (CE/SRRC/MIC), < 26 dBm (FCC)
2.4GHz Transmission Distance: 160 m*/100 m**
* Measured under FCC standard in an unobstructed environment free of interference.
** Measured under CE/SRRC/MIC standards in an unobstructed environment free of interference.
Dimensions: 100×61×34 mm (L×W×H)
Weight: 123 g
Rod Diameter: 15 mm
Output Gear Teeth: 30
Output Gear Module: 0.8
Compatibility
DJI RS 4 Pro
DJI RS 4
DJI RS 3 Pro
DJI RS 3
DJI Focus Pro Grip
DJI Focus Pro Hand Unit
DJI Ronin 4D Flex
The LiDAR boasts 76,800 ranging points, a leap of 77% in quantity, sharpening human-subject edge detection while effectively reducing focus hunting. The max focus distance is 20 meters, and the human-subject focus distance is approximately three times that of the previous generation, effortlessly handling long-distance focusing with telephoto lenses. The 70° FOV is beneficial for edge compositions and close-up shots, providing a larger framing space. The LiDAR refresh rate of 30 Hz allows for faster subject information collection, ensuring more confident focusing on moving subjects. When paired with the DJI Focus Pro Motor, the LiDAR can enable autofocus for manual lenses that have been calibrated.
Tips
When the stabilizer's screen is in 1x mode, the LiDAR's ToF sensor operates within a 10-meter sensing range by default. To extend to a 20-meter focus distance, you can tap the + icon on the screen to enable 2x zoom display.
In The Box
Focus Pro LiDAR × 1
Multi-Camera Control Cable (USB-C, 30 cm) × 1
Specifications
Ranging Points: 76,800
Sensing Range: 0.5-20 m
FOV:
Wide-Angle Mode: 65° (horizontal), 40° (vertical), 76.1° (diagonal)
Telephoto Mode: 20° (horizontal), 20° (vertical), 28.3° (diagonal)
Frame Rate: 30fps
Equivalent Focal Length: 30 mm (wide-angle mode)
Ranging Accuracy: ±1% to 3% (affected by the distance)
Power Consumption: Average approx. 6.3 W, max 6.8 W
Input Voltage: 6.6-17.2 V
Operating Temperature: -20° to 45° C (-4° to 113° F)
Main Body Dimensions: 68×25×57 mm (L×W×H)
Weight: 140 g
Compatibility
DJI RS 4 Pro
DJI RS 3 Pro
DJI Focus Pro Grip
IMMERSIVE MOTION CONTROL
When used with DJI Goggles 3, the drone's motion responds to your wrist movements. Combined with DJI RC Motion 3's robust anti-interference capability, you can achieve precise "point-to-fly" control.
QUICK CONTROL WITH AR CURSOR
When used with DJI Goggles 3, you can use the RC to control an AR cursor and navigate the menu on the goggles' screen. Enabling functions, and adjusting camera settings has never been more intuitive and efficient.
COMPACT AND PORTABLE, FEATURE RICH
Light and portable, DJI RC Motion 3 features a streamlined design for a comfortable grip. A natural layout of various function buttons on its compact body enables you to perform takeoffs, stops, and mode switches with just a 'push' of your finger.
Tips
Using DJI RC Motion 3 alone cannot control the drone. It requires pairing with DJI Goggles 3.
Compatibility
DJI Avata 2 DJI Mini 4 Pro DJI Air 3 DJI Goggles 3
IN THE BOX
DJI RC Motion 3 × 1DJI RC Motion 3 Lanyard × 1
Provides storage, charging, and power accumulation for batteries. Paired with the DJI 65W Portable Charger, it can fully charge an Intelligent Flight Battery in only 45 minutes. It can sequentially charge three batteries at a time, eliminating the hassle of charging batteries one by one. It can also serve as a mobile power bank to charge devices like the DJI Goggles and smartphones.
Compatibility
DJI Avata 2
PRODUCT SPECIFICATIONS
Input: 5-20 V, max 3 AInput (Power Accumulation): Max 65 WOutput (Charging): Max 17 VOutput (USB): 5 V, 2 ACharging Method: Three batteries charged in sequenceRecommended Chargers: DJI 65W Portable Charger, DJI 65W Car Charger, or other USB Power Delivery chargers
The DJI Avata 2 ND Filters Set includes ND8, ND16, and ND32 filers. By selecting the appropriate filter, you gain more freedom in controlling the aperture and shutter speed, capturing stunning shots like motion blur.
Compatibility
DJI Avata 2
IN THE BOX
ND8 Filter × 1ND16 Filter × 1ND32 Filter × 1
Overview
Boasts fast-charging power output of 230 W, and can connect the DJI Power-series power station to charge DJI Matrice 30 series batteries. It takes approx. 47 minutes to charge one Matrice 30 Series TB30 Intelligent Flight Battery from 0% to 100% and 32 minutes to charge from 10% to 95%.
Tips
After a flight, the battery temperature may be high and potentially outside the permissible temperature range for immediate charging. In such cases, it is recommended to wait until the battery temperature drops below 40° C (104° F) before initiating a charge.
In The Box
DJI Power SDC to Matrice 30 Series Fast Charge Cable × 1
Specifications
Length: 40 cm
Compatibility
DJI Power 1000
DJI Power 500
DJI Matrice 30 Series
Overview
Boasts fast-charging power output of 150 W, and can connect the DJI Power-series power station to charge DJI Mavic 3 series batteries. It takes approx. 58 minutes to charge one DJI Mavic 3 Series Intelligent Flight Battery from 0% to 100% and 32 minutes to charge from 10% to 95%.
Tips
After a flight, the battery temperature may be high and potentially outside the permissible temperature range for immediate charging. In such cases, it is recommended to wait until the battery temperature drops below 40° C (104° F) before initiating a charge.
*Actual appearance of certain accessories may vary.
In The Box
DJI Power SDC to DJI Mavic 3 Series Fast Charge Cable × 1
Specifications
Length: 40 cm
Compatibility
DJI Power 1000
DJI Power 500
DJI Mavic 3 Series
DJI Mavic 3 Classic
DJI Mavic 3 Pro Series
DJI Mavic 3 Enterprise Series
DJI Mavic 3 Multispectral Edition
Overview
Boasts fast-charging power output of 125 W, and can connect the DJI Power-series power station to charge DJI Air 3 batteries. It takes approx. 44 minutes to charge one DJI Air 3 Intelligent Flight Battery from 0% to 100% and 30 minutes to charge from 10% to 95%.
Tips
After a flight, the battery temperature may be high and potentially outside the permissible temperature range for immediate charging. In such cases, it is recommended to wait until the battery temperature drops below 40° C (104° F) before initiating a charge.
In The Box
DJI Power SDC to DJI Air 3 Fast Charge Cable × 1
Specifications
Length: 40 cm
Compatibility
DJI Power 1000
DJI Power 500
DJI Air 3
Overview
Boasts fast-charging power output of 200 W, and can connect the DJI Power-series power station to charge DJI Inspire 3 batteries. It takes approx. 44 minutes to charge one DJI Inspire 3 TB51 Intelligent Battery from 0% to 100% and 28 minutes to charge from 10% to 95%.
Tips
After a flight, the battery temperature may be high and potentially outside the permissible temperature range for immediate charging. In such cases, it is recommended to wait until the battery temperature drops below 40° C (104° F) before initiating a charge.
In The Box
DJI Power SDC to DJI Inspire 3 Fast Charge Cable × 1
Specifications
Length: 40 cm
Compatibility
DJI Power 1000
DJI Power 500
DJI Inspire 3
Overview
With this cable, DJI Power-series power stations can achieve 12V DC output, suitable for connecting to model aircraft balance chargers or devices with XT60 connectors.
Tips
Actual appearance of certain accessories may vary.
In The Box
DJI Power SDC to XT60 Power Cable (12V) × 1
Specifications
Length: 40 cm
Compatibility
DJI Power 1000
DJI Power 500
Overview
With this cable, a DJI Power-series power station can convert SDC to a car charger plug, providing a 12V DC output to charge devices with car charger sockets, such as car refrigerators, car vacuum cleaners, and similar accessories.
Tips
Actual appearance of certain accessories may vary.
In The Box
DJI Power SDC to Car Charger Plug Power Cable (12V) × 1
Specifications
Length: 40 cm
Compatibility
DJI Power 1000
DJI Power 500
Charge your X4 camera and record audio with an external microphone using the Insta360 Microphone Adapter. The adapter inserts into your camera with a male USB-C connector. A 3.5mm audio port connects your microphone of choice to the camera, and a USB-C port allows you to charge the camera while recording audio. Thanks to its slim profile, the mic adapter remains invisible even when shooting 360° shots.
CompatibilityX4
Attaches to X4 microphones for optimal wind noise reduction
Includes six foam wind muffs to effectively minimize wind interference
Acoustically transparent design preserves audio quality
Remains hidden in 360° shots for seamless recording
Prevents audio distortion caused by wind and external noise
CompatibilityX4
Custom-fit to the Insta360 X4, this Thermo Grip Cover secures to the camera and reduces surface temperature so you can shoot 8K video for longer. The grip is designed to protect your hand during operation. Thanks to its polycarbonate and PCM construction, the cover effectively lowers the camera's operating temperature up to 7ºC.
CompatibilityX4
The Insta360 USB Cover offers protection for the USB port on your X4 camera, safeguarding it against moisture and dust. This cover can serve as a replacement if your original USB cover goes missing or gets damaged. With its tactile button, operating the cover is easy and intuitive.
CompatibilityX4
This Insta360 Utility Frame for X4 serves as a protective solution for your Insta360 X4 camera while also providing additional mounting options for accessories to enhance your gear setup. Its innovative design allows for easy insertion of your camera, with a simple snap closure that doesn't require any tools. Even when inside the frame, you still have full access to all of your camera's ports. Additionally, the frame features a convenient fold-out mount with a 1/4"-20 screw, allowing for versatile mounting options.
On either side of the frame, you'll find two cold shoe mounts that can be used to attach fill lights or shotgun microphones. By using the detachable 2-prong mount, one of these cold shoes can be converted to mount the camera horizontally for shooting flexibility. As an added bonus, the frame comes with a silicone lens cap to protect the dual lenses when the camera is not in use.
CompatibilityX4
Compact and Portable: Ultra-compact design for easy storage. Folds to just 42.8 CM and weighs only 0.9 KG / 1.984 Lbs, ideal for travel and outdoor photography.
Durable and Versatile: Made of lightweight durable carbon fiber, tripod head supporting up to 5 KG. Features bubble levels, quick-release plate, phone clip, and 360° aluminum ball head. Suitable for horizontal and vertical shots.
Adjustable Height: Extends from 160 mm to 1500 mm with center colum raised with leg flip locking system. Non-slip feet for stability on various terrains. Includes a hook for counterweights and a reversible center column for low-angle shots, The Tripod supporting up to 8 KG.
Innovative Features: Equipped with three ¼ -20 expansion threaded holes for attaching extra gear like lights and microphones. Offers flexibility for various photography needs with Air Tag compartment.
Monopod Conversion Feature: This tripod offers dual functionality. By simply unscrewing one of its legs, you can quickly transform it into a monopod. This feature is particularly useful for situations where space is limited or more mobility is required, like in crowded places or uneven terrain where setting up a tripod might be challenging.
Ultimate Lens Protection: Keep your Avata 2 drone's camera lens safe from scratches and dust with Freewell's UV Filter, designed for durability and resilience.
Crystal Clear Footage: Enhance the clarity and quality of your drone videos and photos by filtering out UV haze and atmospheric haze, ensuring vibrant and sharp images.
Seamless Drone Compatibility: Specifically engineered for the Avata 2 drone, this UV filter fits perfectly, ensuring easy installation and removal without affecting flight dynamics.
Premium Optical Quality: Crafted from high-grade optical glass, the Freewell UV Filter guarantees no compromise on image quality, offering superior protection and image enhancement.
Lightweight Design for Unhindered Performance: Designed to be lightweight, this UV filter maintains the Avata 2 drone's balance and performance, ensuring smooth and stable flights.
Suitable For: AC200MAX / EP500ProNever Run out of PowerBLUETTI B230 suits your ordinary electricity needs at 2,048Wh capacity and supports solar, AC (Sold separately), car, and lead-acid battery charging to capture power whenever and wherever. *The car and lead-acid battery charging need a D050S.Versatile Power SourceThe 100W USB-C, 12V/10A cigarette lighter, and 18W USB-A output ports are to charge your on-road essentials like smartphones, laptops, cameras, fans, lights, and so on.Give Your Devices More RuntimeB230 has over 3,500 life cycles with top-notch LFP cells, offering up to 80% of the original capacity. Moreover, it is supplementary compatible with BLUETTI AC200MAX for a whopping capacity.Home Backup and Trip Power BankThe AC200MAX + B230 unit is portable and safe to use. Just put them in your home or trunk, they will serve as your home and camping trip backup or power supply with a great feature set.BATTERY INFOCapacity: 2,048Wh (51.2V,40Ah)Cell Chemistry: Lithium Iron Phosphate (LiFePO4)Lifecycle: 3,500+ Cycles to 80% Original CapacityShelf-Life: Recharge to 80% Every 3-6 MonthsManagement System: MPPT Controller, BMS, etc.OUTPORTSUSB-C Port: 1 x 100W Max.USB-A Port: 1 x 18W USB-A12V DC Outlets: 1 x 12V/10A (Car Outlet)INPUTAC Input: 500W Max.Solar Input: 500W Max., VOC 12-60VDC, 10A (Via BLUETTI D050S)Car Input: 12/24V from Cigarette Lighter Port (Via BLUETTI D050S)Lead-acid battery: 12/24V from Cigarette Lighter Port (Via BLUETTI D050S)Max Input: 500WRECHARGE TIMEAC Adapter (500W): ˜5.5~6 HoursSolar Panel(500W): ˜4.5~5 Hours (With prime sunshine, ideal orientation and low temperature)12V/24V Car Outlet (100W/200W): ˜10 or 20 HoursGENERALCompatibility: AC200Max(Original Expansion), AC200P/EB150/EB240 (DC-DC Connection via D050S)Pass-through Charging: YesWeight: 48lbs (21.8kg)Dimensions (LxWxD): 16.5 x 11 x 8.9in ( 42 x 28 x 22.75cm)Operating Temperature: 32°F-104°F (0-40°C)Storage Temperature: -4-104?(-20-40?)Certification: UL, CEC, DOE, FCC, CA Prop 65
Keep your GO 3/GO 3S and its essentials safe and sound in between shoots.Precisely molded for GO 3/GO 3S and in-the-box accessories, plus the Mini 2-in-1 Tripod and Quick Release Mount.Robust, hard-shell case to protect your action cam from bumps and drops.
PRODUCT SPECIFICATIONS
Outer box material:Fabric, ethylene-vinyl acetate and velvet
Inner support material:Jersey fabric and ethylene-vinyl acetate
Weight:260g (9.1oz)
Dimensions:232x157x67mm (9.1x6.2x2.6in)
IN THE BOX
Insta360 GO 3/GO 3S Carry Case × 1
Seamless windproof cotton for quality sound transmission.
High-quality acoustic foam to reduce wind noise and produce more transparent sound.
Specifically designed for GO 3/GO 3S.
Includes 4x Mic Wind Muffs.
How to use:
Remove the film from the Mic Wind Muff. Align and stick it under the camera lens, ensuring it does not cover the microphone hole. Press down gently for a few seconds to ensure it is secure.
To remove the Mic Wind Muff, gently peel it off from the edge of the camera lens. Avoid pulling it from the center.
Notes
Before installing, make sure the camera is clean and dry.
Ensure both the Mic Wind Muff and Custom Skin do not cover the microphone hole.
Before shooting, ensure the Mic Wind Muff is firmly attached. Otherwise, the noise reduction effect may be affected.
Stick the original film back onto the Mic Wind Muff when not in use to maintain the adhesiveness. If it loses adhesiveness, clean it with a damp cloth, dry it, and reuse it.
Use and store the Mic Wind Muffs in a dry environment. Do not use them for water sports or rainy days, as dampness may affect the noise reduction effect.
IN THE BOX
Insta360 GO 3/GO 3S Mic Wind Muff x 4
Shoot true POV videos hands-free.
New design allows the clip to be used with the Magnet Pendant together.
Adjustable up to 195 degrees, for more angles and possibilities.
Silicone, skin-friendly and easy to use.
IN THE BOX
Insta360 GO 3/GO 3S Easy Clip x 1
