The FireFly Selfie Stick comes equipped with the FBTR-BT2 Bluetooth Remote making it a versatile handheld mini tripod.
Featuring a multi angle ball head and a unique 2-in-1 camera plate and phone holder with a payload of 1.5kg, it is suitable for any smartphones and small mirrorless cameras. Extendable selfie stick up to 383mm. Compatible with iOS 11.4 and Android 5.1 or above devices. Ball head has 2 x 1/4” accessory extension threads.
Folded Dimensions: 226 x 75 x 44mm
Min. Height: 176mm
Max. Height: 383mm
Weight: 214g
Payload: 1.5kg
The FireFly FFT-F1C is a flexible tripod suitable for both mirrorless cameras and smart phones. Comes included with a removable smartphone holder.
The integrated ball head of the tripod can not only rotate the horizontal angle of 360 degrees but also adjust the vertical angle. The phone holder is suitable for phone sizes 56mm up to 94mm.
Specifications:
Overall Dimensions: 280mm x 58 x 50mm
Weight: 230g
Payload: 1.5kg
The FireFly Video Creator is a combo kit of the FMT-T2 and the FVH-PH3. With the combination of the two units, this makes for a portable go anywhere content creation kit.
As the kit incorprates the hidden phone holder from the FVH-PH3, it can be used to hold a smartphone while using a mirrorless or compact camera simultaneously. The unit can even be used in an underslung position, allowing the user to acheieve low shots.
Overall Dimensions: 226 x 75 x 66.5mm
Weight: 273g
Payload: 3KG
The FVH-PH3 Video Pan Head is a versatile tripod head designed for smartphones, DSLR, mirrorless and compact cameras.
This tripod head can be mounted to most tripods via its 1/4” screw thread. This unique video pan head has a hidden phone holder in the handle which unfolds and allows you to use both a camera and smartphone simultaneously. Independant locks for pan and tilt allows for an easy operational experience.
• Overall Dimensions: 143 x 74 x 73mm
• Weight: 159g
• Payload: 3kg
The FMT-S2 Mini Pocket Tripod adopts a unique folding design which makes it small and compact to fit into a handbag or pocket. The integrated phone holder includes a cold shoe so a microphone or LED light can be attached. The phone holder is also rotatable allowing for portrait or landscape shooting.
Specifications:
Overall Dimensions: 121 x 47 x 33mm
Weight: 75g
Payload: 500g
Designed especially for smartphones, the FBTR-BT2 Bluetooth Remote Control has an effective range distance of 10 meters.
Easy to connect, easy to use. Compatible with iOS 11.4 and Android 5.1 or above devices.
Can be easily attached to any hot or cold shoe mount and includes an integrated lanyard hoop, so you’ll never lose the remote.
Overall Dimensions: 38.5 x 28 x 11.5mm
Weight: 6.5g
Effective Distance: 10mt
Battery: CR1632 (included)
The FPH-H2 phone holder is designed for phone sizes ranging from 56mm up to 86mm, which is big enough to hold an iPhone 15 Pro Max.
Equiped with a quick release button, it allows the phone holder to quickly expand without the need to pull making it easier to insert the phone. Additional accessory attachments include a cold shoe and a 1/4” thread. Plus the FPH-H2 can be joined together via the cold shoe in a head-toe configuration allowing it to become a modular unit holing multiple devices.
Overall Dimiensions: 85 x 37 x 25.5mm
Clip Range: 56 - 86mm
Weight: 37.5g
The FBH-K2 Ball Head is lightweight and compact but yet strong enough to hold a max payload of 2kg.
The ball head is rotatable to support 90 degree vertical shooting and incorporates a unique expansion 1/4" accessory thread.
Fits all tripods with 1/4" base thread.
Overall Dimensions: 48 x 47 x 56mm
Ball Diameter: 20mm
Weight: 58g
Payload: 2kg
The FireFly FMT-T2 Mini Tabletop Tripod is strong and durable. Each leg is designed with reinforced lightweight aluminium running down half the length of the legs offering a strong 5kg payload.
A simple push button mechanism allows the tripod to be locked at two different angles with a low minimum height of only 47mm.
Folded Dimensions: 153 x 35 x 42mm
Max. Height: 122mm
Min. Height: 47mm
Weight: 114g
Payload: 5kg
Three infantry weapons teams wielding exotic creations built by the Clans Skryre
Can be assembled wielding one of three options Warpvolt Scourgers, Warpfire Throwers, and Ratling Guns
Choose the right weapon to take down your foes in the name of the Horned Rat
Warpspark Weapon Batteries are members of the Clans Skryre, who often go to war unnoticed among hordes of slavering Clanrats. When the time is right, they reveal themselves, unleashing their bizarre but mighty machines on an unsuspecting foe. Whether through a hail of bullets, gouts of eerie warpflame, or bolts of warp lightning, they reap a deadly harvest for the glory of the Horned Rat.This multipart plastic kit builds three weapons teams wielding one of three different machines of death. All of them can be somewhat unreliable, but are tailored to taking down different foes. Ratling Guns produce a potential hailstorm of hot lead for mowing down enemy hordes. Warpfire Throwers spew out an unquenchable green flame, and Warpvolt Scourgers are excellent at taking down foes with arcs of warp lightning. You'll find loads of cosmetic parts to swap around, including head options for each gunner, plus different weapon tips, backpacks, and more so you can easily personalise your units.This kit contains 63 plastic components, and 3x Citadel 60mm x 35mm Oval Bases. These miniatures are supplied unassembled and unpainted – we recommend using Citadel Plastic Glue and Citadel Colour paints.
This is an authentic Viofo rear camera cable for the Viofo A139 dash cam series.
Connector Types Round-spaped (One right-angle, one straight)
Cable Length 6-metre (19.7ft)
About this item
8M (26ft) rear cable for A129 Duo, A129 Pro Duo, A129 Duo IR Dash Camera
DO NOT SUPPORT A129 Plus Duo
This cable has one straight end connector and one 90 degree connector. If you want both end 90 degree connector cable, please contact us.
This cable cannot be extended manually through connecting other USB cable.
This cable is not compatible with other brand.
HK5 Hardwire Kit is a Type-C Hardwire Kit For the VS1 Dash Camera.
Hardwire kit for parking mode:
Parking mode provides surveillance on your parked vehicle. When the engine is off, Hardwire kit is used to provide continuous power and protect your car battery from discharge.
Automatic Parking mode:
With ACC detection, the dash cam will switch to parking mode automatically if the vehicle engine is shut off. The dash cam will switch into normal recording when the vehicle engine is on.
Configurable voltage cut-off:
Viofo HK5 ACC hardwire kits lets you set a voltage cut-off value with 4 options, when the voltage of vehicle's battery drops to the cut-off value, HK5 will stop powering your dashcam, thus protecting your battery from discharge.
The CPL (Circular Polarizing Lens) is suitable for the front camera lens.
Protect the camera lens from fingerprints, scratches and dirt destroying.
Reduce reflections and glare from glass, metals or shiny surfaces that would damage image quality, this works in the same way as polarized sunglasses.
Make colors more saturated and videos more beautiful.
It can be used during day time and at night.
Viofo CPL is pre-calibrated in Factory, you just need to match the white line on the CPL with the white line on the camera lens for better performance.
A329 Extreme Clarity. Pioneering Technology
with dual Sony STARVIS 2 sensors and Wi-Fi 6
• 4K + 2K
• Dual Sony STARVIS 2 Sensors
• Dual-Channel HDR
• Wi-Fi 6 Transmission
• Support External SSD Storage
• Voice Control
• Ultra-Precise GPS
• Parking Mode
4K Front + 2K Read
Extreme Clarity, Stunning Details
Powered by Quad Core ARM Cortex A53 chipset and Sony STARVlS 2 technology, A329 records in true 4K and 2K resolution, capturing license plates and every detail with exceptional clarity day and night.
4K 60FPS Recording
Higher Frame Rate, Smoother Video
The industry’s first 4K 60fps dash cam is here with a bang! Featuring the latest video processing chip, A329 lets you experience ultra-smooth, crisp 4K visuals with enhanced 60fps. Capturing details of fast-moving scenes becomes a breeze. Switch to 4K 30fps for HDR recording.
Dual Sony STARVIS 2 Sensors
Leading Imaging Tech for Top Performance
The front camera deploys Sony STARVIS 2 IMX678 1/1.8'' 8MP image sensor that packs in more pixels for greater clarity and detail, achieving less noise in low light and less motion blur in fast motion. The rear camera deploys Sony STARVIS 2 IMX675 1/2.8'' 5MP image sensor, featuring an impressive 2.5 times wider dynamic range than the STARVIS pixel of the same size, capturing exceptionally clear and sharp videos.
HDR Enhanced Vision
Capturing Clear Licence Plates is a Breeze
The combination of Sony STARVIS 2 technology and HDR feature balances extremely bright and dark areas, revealing details and capturing accurate license plates even in fast move from both front and rear recordings.
First Introduction to Wi-Fi 6 Technology
Faster and Smoother 4K Streaming
A329 is the first model to use Wi-Fi 6 technology, which boosts operation speeds by three times in the 5GHz band, up to 30MB/s, enhancing video previewing, downloading and sharing. A 1-minute 4K video can be downloaded in under 10 seconds. It offers significant convenience in case of emergency.
Channels: 2-Channel
Image Sensor: Front: Sony STARVIS 2 Sensor 8MP IMX678; Rear: Sony STARVIS 2 Sensor 5MP IMX675
Resolutions: 2160P(4K)
Video Resolution: Front + Rear: 3840 * 2160P 60fps + 2560 * 1440P 30fps
Wi-Fi: Wi-Fi 6 2.4GHz & 5GHz
GPS Logger: Built-in
Display: 2.4“ Inch
Video Out: micro HDMI to HDMI
Power Port: Type-C USB
Storage: Up to external 512GB microSD Card
Battery & Charging: NO battery, use capacitor, 5V 2A.
Buffered Parking Mode: Supported
Operating Temperature: -20℃ ~ 65℃ (-4℉ ~ 149℉)
Storage Temperature: -20℃ ~ 70℃ (-4℉ ~ 158℉)
Applicable Hardwire Kit Cable: HK4 (Not Included, Optional)
HDR: Front & Rear Supported
2K QHD + 2K QHD Recording
A229 Plus comes with cutting-edge dual cameras that deploy Sony's latest STARVIS 2 technology, supporting upgraded 2K Quad HD recording for front and rear view. It delivers excellent video quality, capturing every detail all day and night.
Dual Sony STARVIS 2 Sensors
A229 Plus is the industry's first dashcam using two Sony STARVIS 2 IMX675 image sensors which offer 2.5 times wider dynamic range and higher light sensitivity than the STARVIS tech, bringing much less noise and motion blur during day & night recording.
HDR for Front & Rear Cameras
A229 Plus is outstanding in a wide range of lighting conditions, by virtue of the dual Sony STARVIS 2 IMX675 sensors. Every captured footage is enhanced with a wider dynamic range to reveal more details in highlights and shadows. These flagship sensors, coupled with advanced HDR technology, balance extremely bright and dark areas to accurately restore 2K details recorded at night, even captures accurate license details in fast move from both front and rear recording.
Smart Voice Control & Notification
A229 Plus comes with an advanced voice control feature, which allows you to start/stop recording, take photos, and turn on/off WiFi with simple spoken commands in multiple languages (English/Chinese/Russian/Japanese). It can also clearly notifies you of settings changes or memory card errors, keeping you fully focused on the road.
Ultra Fast 5GHz Wi-Fi
An upgraded 5GHz Wi-Fi connection module is built into A229 Plus to provide much faster Wi-Fi data transfer, ensuring smooth video previewing, downloading and sharing.
Super Fast Video Downloads to Phone Directly
The dashcam supports seamless connectivity to your smartphone via a USB2.0 Type-C to Type-C data cable, enabling superfast downloads of photos and videos. Specifically, the download speed is up to 20MB/s on iPhone 15. This direct connection also facilitates effortless firmware updates, ensuring access to the latest features and optimal performance.
In 2018 photographer/ editor Peter Lindgren started his own YouTube channel. After that he worked for years together with the biggest brands and has hundreds of thousands followers on his social media. Besides that Peter likes to develop products. Also the Tri-Charge, which he developed together with Jupio, was initiated from his daily practices and his experience as a professional filmmaker. The Tri-Charge charges 3 batteries via USB-C at the same time. By pushing the button on the side, the status of the batteries will become visible. When you need power for other devices, the Tri-Charge works as a Powerbank via the USB-C output. In addition, the Tri-Charge can save up to 8 memory cards, CFexpress (type A or B), SDHC card and micro SDHC. There are 3 models available for Canon LP-E6, Nikon EN-EL15 and Sony NP-FZ100.
Specifications:USB-C input: 5V/2.4A, 9V/2.0A (via PD)USB-C output: 5V/2.0A (Powerbank)Output Charger: 8.4V-(1x=1200mA, 2x=1000mA, 3x=700mA)Memorycase: 3x SDHC / 2x micro SDHC / 3x CFexpress (A or B)Dimensions: 136,2 x 79,1 x 40,2 mmWeight: 180 gramWarranty: 3 years
In 2018 photographer/ editor Peter Lindgren started his own YouTube channel. After that he worked for years together with the biggest brands and has hundreds of thousands followers on his social media. Besides that Peter likes to develop products. Also the Tri-Charge, which he developed together with Jupio, was initiated from his daily practices and his experience as a professional filmmaker. The Tri-Charge charges 3 batteries via USB-C at the same time. By pushing the button on the side, the status of the batteries will become visible. When you need power for other devices, the Tri-Charge works as a Powerbank via the USB-C output. In addition, the Tri-Charge can save up to 8 memory cards, CFexpress (type A or B), SDHC card and micro SDHC. There are 3 models available for Canon LP-E6, Nikon EN-EL15 and Sony NP-FZ100.
Specifications:USB-C input: 5V/2.4A, 9V/2.0A (via PD)USB-C output: 5V/2.0A (Powerbank)Output Charger: 8.4V-(1x=1200mA, 2x=1000mA, 3x=700mA)Memorycase: 3x SDHC / 2x micro SDHC / 3x CFexpress (A or B)Dimensions: 136,2 x 79,1 x 40,2 mmWeight: 180 gramWarranty: 3 years
The LUC0065 Jupio Universal Quick Charger is the successor of the very popular LUC0060. Product images show optional accessories and application examples .
Jupio Universal Fast Charger LCD (USB-C input)
The difference between the Jupio Universal Fast Charger LUC0065 and the LUC0060 is that the LUC0065 has a USB-C input, which will become the new EU standard.
This charger can charge most lithium-ion camera/camcorder batteries up to 7.4V. The adjustable pins of the charger can be connected to the positive and negative terminals of the battery. Don't worry about which pin is set to + and which pin is set to -, because the charger has automatic polarity.
In addition, you can also charge 2x rechargeable Ni-MH AA/ AAA batteries with a charging current of 600mA, as well as USB devices such as smartphones or tablets via the USB-A output.
The LUC0065 is equipped with a backlit LCD display that informs you about the charging progress day and night
In 2018 photographer/ editor Peter Lindgren started his own YouTube channel. After that he worked for years together with the biggest brands and has hundreds of thousands followers on his social media. Besides that Peter likes to develop products. Also the Tri-Charge, which he developed together with Jupio, was initiated from his daily practices and his experience as a professional filmmaker. The Tri-Charge charges 3 batteries via USB-C at the same time. By pushing the button on the side, the status of the batteries will become visible. When you need power for other devices, the Tri-Charge works as a Powerbank via the USB-C output. In addition, the Tri-Charge can save up to 8 memory cards, CFexpress (type A or B), SDHC card and micro SDHC. There are 3 models available for Canon LP-E6, Nikon EN-EL15 and Sony NP-FZ100.
Specifications:USB-C input: 5V/2.4A, 9V/2.0A (via PD)USB-C output: 5V/2.0A (Powerbank)Output Charger: 8.4V-(1x=1200mA, 2x=1000mA, 3x=700mA)Memorycase: 3x SDHC / 2x micro SDHC / 3x CFexpress (A or B)Dimensions: 136,2 x 79,1 x 40,2 mmWeight: 180 gramWarranty: 3 years
