Stormboyz, the shock troops of many successful warbands, dedicate their lives to the time honoured martial disciplines of drilling, marching and hurtling through the air. To this end they go to war strapped to rokkit packs that, when activated propel their wearers forward on great tongues of oily black flame.This box set contains 5 multipart plastic Ork Stormboyz, including: 10 head variations, 5 different torso-fronts and 5 body variations allowing you to assemble a unique looking squad. This set contains a host of accessories and additional parts allowing to further customise your squad, and even includes a Gretchin with his very own rocket pack. Models supplied with 32 mm round bases.

Read more less

Versatile rapid-response battlesuits for your T'au Empire army Builds three Crisis Battlesuits with loads of options, including weapon loadouts, support systems, and armour designs Includes six tactical drones, which can be built in several configurations An iconic rendering of T'au technological progress and ingenuity, the XV8 Crisis Battlesuit is a thing of joy to behold in battle - unless you're its target. Skimming along on the jets of their repulsor engines, Crisis Battlesuits close on their enemy with a surprising speed, unloading their diverse weaponry and leaping away in a split second. Only the best T'au warriors are allowed to pilot these machines, spending years on the front line before even being considered for this honour. Able to be dropped from a planet's upper atmosphere, slamming into ranks of enemies like a tidal wave, the XV8 Crisis Battlesuit is the ultimate balance of firepower, speed and resilience.This multi-part plastic kit contains everything needed to build three XV8 Crisis Battlesuits, with six accompanying drones. There's an impressive level of customisation available, with ball fittings allowing unprecedented posability. One miniature can be optionally assembled as a Shas'vre, with a special head and chest plate, and there's a prodigious amount of advanced T'au weaponry in the box: four plasma rifles, three flamers, four fusion blasters, four burst cannons, three missile pods and three shield generators. The accompanying drones have options for gun, shield or marker variants, and you can build a total of six drones, with up to three of any one type. The kit also includes an assortment of battlesuit electronics systems. One model in the kit can even be built as the new, experimental Iridium-class XV8-02 Crisis Battlesuit - distinguishable by its thicker armour and aggressive appearance. Huge variety!152 components are included in total, with three Citadel 50mm Round bases and three Citadel small Flying bases.These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel Colour paints.

Read more less

Osmo Action 6 unites an innovative variable aperture with an all-new 1/1.1-inch square sensor to redefine DJI flagship imaging and unlock more possibilities for creative shooting.    DJI'S FIRST VARIABLE APERTURE ACTION CAMERA As DJI's first action camera with a variable aperture of f/2.0 [4]-f/4.0, Osmo Action 6 breaks away from the traditional fixed‑aperture design and offers aperture modes that suit a wide range of scenarios [4].      LARGER APERTURE, BOUNDLESS CREATIVITY With a maximum aperture of f/2.0 [4], Osmo Action 6 excels in low light, delivering noticeably enhanced image quality. Pair it with the Macro Lens [5] to capture stunning close-ups of food, pets, and more with a beautiful shallow depth of field at closer shooting distances [5].   Adaptive Aperture, Defined by YouIn Auto mode [4], choose from multiple aperture ranges that suit your needs. The aperture adjusts automatically within each range to achieve clear and balanced results, from low-light night shots to detailed landscapes.   STARBURST MODE [6]: MAKE LIGHTS SPARKLE In bright night scenes, Starburst mode [6] turns city lights into captivating starbursts, making your night shots truly stand out.   FLAGSHIP-LEVEL IMAGE QUALITYALL-NEW 1/1.1-INCH SQUARE SENSOR Equipped with a new 1/1.1-inch sensor, Osmo Action 6 supports up to 4K/120fps recording in 4:3, maintaining clear detail in both low light and high‑contrast scenes.   CUSTOM MODE: FRAME IT YOUR WAY Powered by DJI's custom-designed square sensor, Osmo Action 6 debuts the 4K Custom mode that allows you to shoot first and crop later. Freely crop into multiple aspect ratios, giving your creative work greater flexibility.   SUPERNIGHT MODE [7]: CLARITY AT NIGHT With its larger sensor, larger aperture, and new noise reduction technology, Osmo Action 6 enables SuperNight mode [7] to capture pure, detailed video of up to 4K/60fps in challenging low-light conditions..   10-BIT D-LOG M [8] 10-bit D-Log M [8] preserves highlight and shadow detail for greater flexibility in post‑production. Osmo Action 6 also provides an on‑screen D‑Log M preview for real‑time color and exposure monitoring.   SLOW MOTION: FREEZE THE THRILL Osmo Action 6 natively supports up to 4K/120fps slow-motion recording, and can intelligently generate up to 32× Super Slow Motion [9] at 1080p for smoother, more detailed visuals.     PRO‑GRADE CAPTURE, PRO‑LEVEL IMAGE QUALITY Multiple Stabilization Modes [10]RockSteady 3.0 keeps your shots steady, and HorizonSteady supports video recording up to 4K/60fps. 2× Lossless Zoom [11]Get 2× [11] closer to distant scenes without compromising stunning 4K quality, ensuring faraway details remain clear and sharp. Natural WideThe new Natural Wide FOV keeps a broad perspective while reducing vertical distortion, delivering more natural-looking footage for travel and daily vlogs. Film Tone [12]With a selection of built-in film tones [12], Osmo Action 6 gives your footage a personalized highlight with a single touch. Portrait Mode [13]Osmo Action 6 intelligently prioritizes and detects the subject, optimizing exposure for natural, clear and true-to-life skin tones. Subject Centering & Tracking [24]Intelligently tracks the subject, dynamically keeping the subject centered in every frame. Bursting With ActionBurst mode ensures you capture split-second shots with ease.    OSMO ECOSYSTEM: VERSATILE FOR MULTIPLE SCENARIOS Osmo Action 6 offers a complete ecosystem to unlock endless creative possibilities. From extreme sports to everyday life, it's built to handle it all with ease. DivingWaterproof up to 20 meters [3] without a case. With the built-in color temperature sensor and water pressure gauge [14], Osmo Action 6 delivers true-to-life underwater colors and records your dive data. Skiing/SnowboardingCold‑resistant design, 4‑hour battery life [1], Gesture Control [15] and Subject Tracking [24] features make ski and snowboard action effortless to capture. MotorcyclingThe OsmoAudio™ ecosystem simultaneously records rich ambient sound and your voice [2], capturing the full experience of every acceleration and turn. Mountain BikingOur powerful stabilization technology smooths out the roughest trails. Your footage stays locked and stable, capturing the raw intensity of the ride. Road CyclingSports data [16] can be added to your footage, making it more immersive and professional. HikingEffortlessly capture the beauty of nature with a wide range of accessories and the Mimo app.     DJI OSMOAUDIO™ CONNECTIVITY ECOSYSTEM DJI OsmoAudio™ ecosystem supports direct connection to two DJI microphone transmitters [2], capturing high-quality audio without a receiver. Activate the Built-in Mic Audio Backup feature to blend rich ambient sounds for a truly immersive experience that brings your scene to life. OsmoAudio™ Direct Microphone Connection [2]Directly connects two DJI microphone transmitters [2] for dual high-quality audio capture without a receiver. Built-in Pro AudioA built-in three-mic array captures rich, stereo sound, while our intelligent noise reduction algorithm cuts through wind to ensure your voice comes through loud and clear.   EXPAND YOUR VISION WITH NEW ACCESSORIES Unlock new perspectives with our all-new Macro Lens [5] and FOV Boost Lens [17], designed to expand your creative toolkit. New Macro Lens [5]Capture stunning close-ups of food, flowers, or pets with the new Macro Lens [5] at closer shooting distances [5]. Use Focus Peaking in the Mimo app to keep your subjects sharp while the background naturally blurs for a pleasing shallow depth of field. New FOV Boost Lens [17]When attached with the Osmo Action 6 FOV Boost Lens [17], the camera automatically switches to FOV Boost mode, expanding native 155° FOV to 182° [18]. Ideal for getting your entire snowboard or handlebars in the frame, for truly immersive, edge-to-edge POV shots.   DJI MIMO APP The Mimo app lets you to preview the camera view and adjust settings. It comes with a variety of editing templates and a One-Tap Edit feature.  Sports Dashboard [16]Add a sports dashboard [16] overlay to your videos for any sports scenario and make every shot look professional. D-Log M Color Recovery [8]The Mimo app supports D-Log M [8] color recovery for flat footage, enabling more stylized adjustments. Live PhotosThe Mimo app can generate static and live photos [19], including model information and shooting parameters.  InvisiStickInvisiStick removes the selfie stick in the Mimo app, keeping the focus on the subject without distractions. Diverse Video TemplatesAccess a rich library of video templates to easily edit and create high‑quality videos in no time.  HighlightDuring recording or playback, use the Highlight feature to mark key moments with a single tap, improving your editing workflow.     NEXT-LEVEL PERFORMANCE Cold-Resistant & 4-Hour Battery Life [1]Stable operation from -20° C to 45° C (-4° F to 113° F) [25] ensures reliable and worry-free shooting in extreme environments. 50GB Built-in StorageWith 50GB of built-in storage, you can keep shooting without worry, even when you don't have a memory card on hand. Dual OLED High-Brightness TouchscreensBoth front and rear screens are OLED high-brightness touchscreens, delivering high contrast and vibrant colors. Gesture Control [15]Start or stop recording with a simple palm gesture—even in five-finger gloves. Prefer extra peace of mind? Set gestures to only start recording, so you never miss a moment by accident. GPS Bluetooth Remote Controller [20]Compatible with Osmo Action GPS Bluetooth Remote Controller and third-party controllers. It allows easy control of camera start/stop recording and wake/sleep functions.  EXPLORE MORE FEATURES Dual-Direction Quick-Release SystemThe upgraded dual-direction quick-release system enhances your quick-release experience, unlocking more creative possibilities. Pre-RecWith Pre-Rec mode on, the camera automatically saves up to 5 minutes of footage before the official recording starts. TimecodeThe built-in Timecode feature makes it easy to synchronize footage from multiple cameras in post-production, speeding up professional editing workflow. High-Speed TransferWi-Fi 6.0 and USB 3.1 deliver wireless speeds up to 80 MB/s, and up to 300 MB/s via USB 3.1 cable for fast data transfer [21].  Battery Fast ChargingCharge to 80% in just 22 minutes, and reach full power in only 52 minutes [22].  Wi-Fi LivestreamingConnect your device via the Mimo app and start streaming live instantly.     Notes Measured at a room temperature of 25° C (77° F), while recording 1080p/24fps (16:9) video, with RockSteady on, Wi-Fi off, Voice Control and Gesture Control off, and screens off. Data was collected in a controlled environment and should be taken as reference only. Actual battery life may vary when activating and using Osmo Action 6 in the European Union and UK, due to local regulations regarding operating temperature of the product. Please refer to the actual user experience. Two DJI microphones are required. Direct connection to the first-generation DJI Mic is not supported. DJI microphones are sold separately.  Before use, close the Battery Compartment Cover and the USB-C Port Cover, and tighten the Glass Lens Cover. It is recommended to install Waterproof Case for long-term underwater shooting or in environments with high water impact pressure. Osmo Action 6 and its Waterproof Case have an IP68 waterproof rating. Do not use the camera in hot springs or extreme underwater environments, or let it come into contact with corrosive or unknown liquids. The shutter/record button is disabled at around 0.14 MPa (approximately 14m depth). The actual depth for disabling the shutter/record button may vary depending on water conditions, air pressure, and device status. In Auto mode, users can choose from five aperture ranges (f/2.0–f/4.0, f/2.2–f/4.0, f/2.4–f/4.0, f/2.6–f/4.0, and f/2.8–f/4.0), with f/2.0–f/4.0 set as the default. In Large Aperture (f/2.0) mode, the aperture is fixed at f/2.0. Aperture modes may be limited depending on the shooting modes and accessories. For details, refer to the FAQ page on the Osmo Action 6 official website. Osmo Action 6 Standard Combo does not include Osmo Action 6 Macro Lens, which is sold separately. When paired with the Macro Lens, the focus distance can be adjusted between 11 cm and 75 cm. The Macro Lens does not support underwater use (e.g., diving) and is splash-resistant only. When the Macro Lens is attached, certain shooting modes or functions may be restricted. Refer to the actual device display for details. For optimal results, the Starburst (f/4.0) aperture mode is recommended in urban night scenes brighter than 80 lux. SuperNight mode supports 10-bit color depth. It does not support HorizonBalancing, HorizonSteady, 155° ultra-wide FOV, or 4:3 aspect ratio. Certain aperture modes may not be available in SuperNight mode. For details, refer to the FAQ page on the Osmo Action 6 official website. The 10-bit D-Log M color mode can be enabled in standard video mode, Slow Motion mode, and Hyperlapse mode. To use 32× Super Slow Motion, you need to record a standard video at 1080p/240fps. After recording, you can apply the slow-motion effect with just one tap in the camera's playback interface. The 960fps frame rate is an equivalent generated via in-camera interpolation at 1080p, not native 4K. EIS is not supported in Timelapse and Slow Motion modes on Osmo Action 6. HorizonSteady and HorizonBalancing are supported for 1080p/2.7K/4K video (≤ 60fps) in a 16:9 aspect ratio, and 4K Custom videos with frame rates of 60fps or below.  2× lossless zoom is not supported when taking 38MP and 34MP photos, or in SuperNight, Subject Tracking, Slow Motion, and Timelapse modes. Only supported in 16:9 aspect ratio at frame rates below 100fps. This feature requires updating the firmware to the latest version. The water pressure gauge activates at a depth of 1 meter underwater and is only effective when the camera is submerged without a waterproof case. Either hand can be detected within 2-meter range. Do not cover head with hands. Raise hand and open palm to start or stop recording, or take a photo. The effective distance may vary with future firmware updates. Applicable to cycling data from Huawei Watch/Band, Apple Watch, Garmin devices, or third‑party FIT files.  Osmo Action 6 Standard Combo does not include Osmo Action 6 FOV Boost Lens, which is sold separately. The FOV Boost Lens does not support underwater use (e.g., diving) and is splash-resistant only. When the FOV Boost Lens is attached, Slow Motion is not supported. Osmo Action 6's native FOV can reach up to 155°. When equipped with the FOV Boost Lens, Osmo Action 6's FOV expands to 182°. While 182° is the maximum optical FOV achievable with this design, the actual FOV during shooting may vary slightly due to distortion correction and stabilization settings. Applicable only to iOS devices and certain Android devices that support third-party live photo integration. Applicable to devices that support third-party Bluetooth remote-control protocols, including HUAWEI WATCH 5, HUAWEI WATCH Ultimate 2, Wuyang-Honda motorcycles (G150, F125, NSP), Amazfit watches (T-Rex Ultra, CheetahPro, Falcon), Magene bike computers (C506, C606, C706), Giant bike computers (PLANET G9), and etc. GPS Bluetooth remote controllers are sold separately. For USB 3.1 high-speed transfer, a USB 3.1 compatible cable is required and sold separately. In an interference-free environment, the wireless transfer speed of photos/videos stored in the built-in storage can reach up to 80 MB/s, while that of photos/videos stored on the SD card can reach up to 50 MB/s. The included USB-C to USB-C PD Cable (USB 3.1) supports transfer speeds up to 300 MB/s. Measured under laboratory conditions at 25° C (77° F), while using a USB-C charger that supports the standard PD 3.0 protocol with a maximum PD output power of 30 W or above, with the photo taking/video recording functions off and screens off. Data was collected in a controlled environment and should be taken as reference only. EIS is not supported in Timelapse and Slow Motion modes on Osmo Action 4 and Osmo Action 5 Pro. HorizonSteady only supports 1080p/2.7K video (≤ 60fps) in a 16:9 aspect ratio, and HorizonBalancing only supports 1080p/2.7K/4K video (≤ 60fps) in a 16:9 aspect ratio. Subject Tracking mode is only available in horizontal shooting and supports shooting up to 2.7K/60fps video in both 16:9 and 9:16 aspect ratios. When Osmo Action 6 Macro Lens is attached, Subject Tracking is not supported. Measured under laboratory conditions at -20° C (-4° F) and 45° C (113° F) while recording 1080p/24fps (16:9) video, with RockSteady on, Wi-Fi off, and screens off. The maximum continuous recording times at -20° C (-4° F) and 45° C (113° F) were 167 minutes and 190 minutes, respectively. Data was collected in a controlled environment and should be taken as reference only. PRODUCT SPECIFICATIONS GENERAL Dimensions: 72.8×47.2×33.1 mm (L×W×H)Weight: 149 gWaterproof: 20 m without the Waterproof Case, 60 m with the Waterproof CaseBefore use, close the battery compartment cover and the USB-C port cover, and tighten the Glass Lens Cover. It is recommended to install Waterproof Case for long-term underwater shooting or in environments with high water impact pressure. Osmo Action 6 and its Waterproof Case have an IP68 waterproof rating. Do not use the camera in hot springs or extreme underwater environments, or let it come into contact with corrosive or unknown liquids. Number of Microphones: 3Touchscreens: Front Screen: 1.46-inch 331 ppi 342×342800 cd/㎡ max brightness (typical)Rear Screen: 2.5-inch 326 ppi 400×712800 cd/㎡ max brightness (typical), 1000 cd/㎡ peak brightnessSupported SD Cards: microSD (up to 1 TB)Recommended microSD Cards: Recommended Models:Lexar Professional SILVER PLUS 64GB U3 A2 V30 microSDXC Lexar Professional SILVER PLUS 128GB U3 A2 V30 microSDXC Lexar Professional SILVER PLUS 256GB U3 A2 V30 microSDXC Lexar Professional SILVER PLUS 512GB U3 A2 V30 microSDXC Lexar Professional SILVER PLUS 1TB U3 A2 V30 microSDXC Kingston CANVAS Go! Plus 64GB U3 A2 V30 microSDXC Kingston CANVAS Go! Plus 128GB U3 A2 V30 microSDXC Kingston CANVAS Go! Plus 256GB U3 A2 V30 microSDXC Kingston CANVAS Go! Plus 512GB U3 A2 V30 microSDXC Kingston CANVAS Go! Plus 1TB U3 A2 V30 microSDXC  CAMERA Sensor: 1/1.1-inch CMOSLens: FOV: 155°Aperture: f/2.0-f/4.0Focus Range (at aperture f/4.0): 0.2 m to ∞ISO Range: Photo: 100-25600Video: 100-51200** ISO 51200 is available only in SuperNight mode. For all other video modes, the maximum ISO is 25600.Electronic Shutter Speed: Photo: 1/8000-30 sVideo: 1/8000s to the limit of frames per secondMax Photo Resolution: 7168×5376Zoom: Digital ZoomPhoto: Max 2xVideo: Max 2xNot supported in 38MP/34MP photo mode, SuperNight, Subject Tracking, Slow Motion, or Timelapse modes.Still Photography Modes: Single: Approx. 38 MPCountdown: Off/0.5/1/2/3/5/10 sBurst: Up to 30 images/3 sVideo: 4K Custom: 3840×3840@24/25/30/48/50/60fps4K (4:3): 3840×2880@100/120fps4K (4:3): 3840×2880@24/25/30/48/50/60fps4K (16:9): 3840×2160@100/120fps4K (16:9): 3840×2160@24/25/30/48/50/60fps4K (9:16): 2160×3840@100/120fps4K (9:16): 2160×3840@24/25/30/48/50/60fps2.7K (4:3): 2688×2016@100/120fps2.7K (4:3): 2688×2016@24/25/30/48/50/60fps2.7K (16:9): 2688×1512@100/120fps2.7K (16:9): 2688×1512@24/25/30/48/50/60fps2.7K (9:16): 1512×2688@100/120fps2.7K (9:16): 1512×2688@24/25/30/48/50/60fps1080p (16:9): 1920×1080@100/120/200/240fps1080p (16:9): 1920×1080@24/25/30/48/50/60fps1080p (9:16): 1080×1920@100/120/200/240fps1080p (9:16): 1080×1920@24/25/30/48/50/60fpsSuperNight: 4K (16:9): 3840×2160@24/25/30/48/50/60fps2.7K (16:9): 2688×1512@24/25/30/48/50/60fps1080p (16:9): 1920×1080@24/25/30/48/50/60fpsSubject Tracking: 2.7K (16:9): 2688×1512@24/25/30/48/50/60fps2.7K (9:16): 1512×2688@24/25/30/48/50/60fps1080p (16:9): 1920×1080@24/25/30/48/50/60fps1080p (9:16): 1080×1920@24/25/30/48/50/60fpsSlow Motion: 4K: 4x (120fps)2.7K: 4x (120fps)1080p: 8x (240fps), 4x (120fps)Hyperlapse: 4K/2.7K/1080p@25/30fps: Auto/×2/×5/×10/×15/×30Timelapse: 4K/2.7K/1080p@25/30fpsIntervals: 0.5/1/2/3/4/5/6/8/10/15/20/25/30/40 s, 1/2/5/30/60 minsDuration: 5/10/20/30 mins, 1/2/3/5 hours, ∞Stabilization: EIS:RockSteady 3.0RockSteady 3.0+HorizonBalancingHorizonSteadyEIS is not supported in Slow Motion and Timelapse modes. HorizonSteady and HorizonBalancing are supported for 1080p (16:9), 2.7K (16:9), 4K (16:9), and 4K Custom videos with frame rates of 60fps or below. Pre-Rec: Pre-Recording Duration: 5/10/15/30 s, 1/2/5 minsMax Video Bitrate: 120 MbpsSupported File System: exFATPhoto Format: JPEG/RAWVideo Format: MP4 (HEVC)Built-in Storage Capacity: The camera features 64 GB of built-in storage, with 50 GB available for use. The storage capacity can be expanded by inserting a microSD card.Audio Recording: 48 kHz 16-bit; AAC  BATTERY Type: Li-ion 1SCapacity: 1950 mAhEnergy: 7.5 WhVoltage: 3.87 VOperating Temperature: -20° to 45° C (-4° to 113° F)Charging Temperature: 5° to 40° C (41° to 104° F)Operating Time: 240 minutesMeasured at a room temperature of 25° C (77° F), while recording 1080p/24fps (16:9) video, with RockSteady on, Wi-Fi off, Voice Control and Gesture Control off, and screens off. Data was collected in a controlled environment and should be taken as reference only.   CONNECTION Wi-Fi Operating Frequency: 2.400-2.4835 GHz5.150-5.250 GHz5.725-5.850 GHzWi-Fi Protocol: Wi-Fi 6.0802.11 a/b/g/n/ac/axWi-Fi Transmitter Power (EIRP): 2.4 GHz: < 23 dBm (FCC), < 20 dBm (CE/SRRC/MIC)5.1 GHz: < 23 dBm (FCC/CE/SRRC/MIC)5.8 GHz: < 23 dBm (FCC/SRRC), < 14 dBm (CE)Bluetooth Operating Frequency: 2.400-2.4835 GHzBluetooth Transmitter Power (EIRP): < 13 dBmBluetooth Protocol: BLE 5.1 IN THE BOX DJI Osmo Action 6 × 1DJI Osmo Action Extreme Battery Plus (1950 mAh) × 1DJI Osmo Dual-Direction Quick-Release Adapter Mount × 1DJI Osmo Action Curved Adhesive Base × 1USB-C to USB-C PD Cable (USB 3.1) × 1DJI Osmo Locking Screw × 1DJI Osmo Action Anti-Slip Pad × 1DJI Logo Sticker × 1Quick Start Guide × 1Disclaimer × 1Warranty Card × 1

Read more less

NOTE: FERNTECH AIM FOR AN AVERAGE TURNAROUND TIME ON CARE REFRESH CLAIMS OF 10 WORKING DAYS PLUS SHIPPING TIME, ONCE YOUR CLAIM HAS BEEN RECEIVED.CARE REFRESH IS A NON-REFUNDABLE AND NON-RETURNABLE ITEM, ONCE CODES HAVE BEEN SUPPLIED THEY CAN NOT BE RETURNED.   FEATURES Provides two replacement units for an additional charge as per the table below. The Care Refresh 1-year Plan lasts for one year from the date it is bound to your product, and covers for accidents such as water damage or collisions, letting you fly with peace of mind. DJI Care Refresh 2-Year Plan ReplacementService Number of Replacements 4 Number of Flyaway Replacements 2 Replacement Fee $110.00 NZD Flyaway Replacement Fee $169.00 AUD Extended Warranty Period Official warranty is provided during the validity period Support Renewal? Not Available   Please Note: DJI Care Refresh can be bound to your DJI product when it meets one of the following criteria: Brand new and un-activated product. Aircraft or gimbal activated within the last 48 hours. Handheld device activated within the last 30 days. *If your craft has been activated for over 48 hours, follow the instructional guide linked below to verify your craft is in good working order and still eligible for DJI Care Refresh. Video Verification Guide Each time you request a replacement, you’ll receive a replacement unit that is new or equivalent to new in performance and reliability. If you have a DJI Care Refresh activation code, click here to bind it to your aircraft.     WATER DAMAGE COVERAGE We'll replace your aircraft if an accident occurs, even if it's damaged by water.    TWO REPLACEMENTS, TOTAL PEACE OF MIND For an additional charge, DJI Care Refresh offers up to two replacement units within one year and covers accidents such as water damage, crashes and collisions. These replacement units will be new or equivalent to new in performance and reliability.     DJI CARE REFRESH REPAIR PROCESS Ferntech will handle the entire DJI Care Refresh replacement process, which is as follows: Request a Care Refresh replacement via our online Service Request Form Delivery of damaged item* – please contact our helpful team at info@ferntech.co.nz and they will provide details on how to get your product to us. Product assessment by Ferntech team – upon completion, we will select the cheapest option to either have your product repaired or replaced under your DJI Care Refresh policy. Please advise if you would like to have your product replaced even if a repair is cheaper. *We require your product to complete the DJI Care Refresh process.   Please Note: DJI Care Refresh covers return shipping fees back to your address. DJI Care Refresh and the corresponding product must be purchased from New Zealand. DJI Care Refresh only supports aircraft purchased from official or authorised channels. Please find detailed terms and conditions under the warranty tab above. If you want to purchase DJI Care Refresh for an aircraft that has been activated for over 48 hours, follow this Video Verification Guide.     DJI FLYAWAY COVERAGE (DRONE NOT RECOVERED) Care Refresh offers 1x Flyaway Cover if your DJI Neo 2 is not recovered. To have Flyaway Cover active you need to bind your craft and remote controller to your DJI account by following this video. For any Flyaway case, you will need to lodge a Flyaway report through the DJI Fly application and then contact us

Read more less

DJI Neo 2 is DJI’s most compact drone [1] equipped with omnidirectional obstacle sensing [2] and features such as gesture control [3], SelfieShot, and ActiveTrack [4] for more creative ways to fly. Even beginners can get started effortlessly. Think of it as your personal follow-me camera drone, always ready to capture your most exciting moments.   MASTER FLIGHT WITH EASE DJI Neo 2 features an onboard display for intuitive shooting mode selection. To launch, point it at yourself and press the takeoff button with one hand to take off directly from your palm [5], then perform automatic camera movements. The new Return-to-Palm feature [3] allows Neo 2 to precisely locate your palm, return safely, and land steadily, making flights easier than ever.    MORE WAYS TO CONTROL, MORE FUN Neo 2 can follow you effortlessly even without a remote controller, ensuring every exciting moment is captured. Pair it with DJI RC-N3 or RC 2 remote controller for easy-to-start aerial flights. Put on DJI goggles and use the motion controller for immersive FPV flights [8]. The fun never stops! Gesture Control [3]Easily adjust Neo 2’s direction and proximity with one or both hands [3]. Point your palm toward the drone to guide it up, down, or side to side, or use both palms for precise control over proximity. No remote controller is needed for camera angle adjustment. Voice Control via Mobile [9][10]Neo 2 supports voice control [9][10], so you can send flying commands using your smartphone or Bluetooth earphones [11] with complete freedom, whether on a run or cycling. When connected to your phone, it can capture audio and intelligently reduce noise, automatically filtering out propeller noise. This feature enables you to record content independently on your own. Mobile App Control [10]Control Neo 2 with virtual joysticks on the DJI Fly app interface and quickly delve into the joy of flying with no need for a separate purchase of a remote controller. RC Control [12]When paired with DJI RC-N3 remote controller, Neo 2 can achieve a maximum video transmission distance of 10 km [13]. Flexibly operate the camera using traditional RC control sticks when you need to capture professional-level shots. Motion Control [12]When paired with the motion controller and goggles, Neo 2 supports motion control, Easy ACRO, offering an immersive FPV experience.   SMART CAPTURE FOR SHARP RESULTS DJI Neo 2 supports ActiveTrack [4] and SelfieShot, automatically framing subjects for smooth, hands-free shooting from start to finish. Multiple intelligent shooting modes unlock fresh perspectives and spark creativity in seconds. Combined with 4K video recording [7], Neo 2 delivers crisp, detailed, cinematic-quality footage.   FASTER, SMOOTHER TRACKING WITH ACTIVETRACK [4] With enhanced tracking performance, Neo 2 enables smooth and stable tracking for running, cycling, and more. In open areas, it can track at speeds of up to 12 m/s [14], offering faster response and improved stability. Faster Tracking SpeedWith a maximum tracking speed of 12 m/s [14], Neo 2 smoothly follows you even during running or cycling. Added omnidirectional obstacle sensing [2] ensures safer tracking from the front and sides, allowing you to capture fast-motion moments with ease.12 m/s [14] Maximum tracking speed More Tracking DirectionsEight-direction tracking (forward, backward, left, right, and four diagonals) enables smoother, more natural follow shots and expands creative possibilities. In complex environments, the drone can switch to rear tracking mode, steadily keeping the subject in focus and enabling creative freedom with confidence.   EASY MOMENT CAPTURE WITH SELFIESHOT Capture solo or group moments hands-free with SelfieShot, which lets you effortlessly switch between waist-up, full-body, and long shots without a tripod or any extra assistance. Whether it’s birthday parties, weekend picnics, or family outings, Neo 2 automatically composes every scene and maneuvers the camera as needed to capture your cherished moments with just a tap.   4K HIGH-QUALITY IMAGING [7] Neo 2 features a 12MP, 1/2-inch CMOS sensor with an f/2.2 aperture and high-performance image processor for clearer, low-noise footage. Shoot in 4K/60fps video, 4K/100fps slow motion [15], and 2.7K vertical video, all stabilized by a 2-axis gimbal. Stunning Footage Neo 2 captures impressive footage with true-to-life image quality. 4K Video [7]Neo 2 records 4K/60fps video and 4K/100fps slow-motion [15], delivering smooth and clear results. Portrait OptimizationFeaturing DJI’s portrait optimization technology, Neo 2 enhances portraits’ brightness, contrast, and skin tones, showcasing naturally radiant skin with vivid, lifelike expressions. 2.7K Vertical ShootingNeo 2 supports 2.7K vertical video recording, ideal for social media sharing. Enhanced StabilizationThe 2-axis gimbal works with Electronic Image Stabilization (EIS) [16] to deliver smooth, stabilized footage in any scenario.   SMART MODES, STUNNING SHOTS Neo 2 supports intelligent shooting modes such as Dolly Zoom, QuickShots, and MasterShots, offering diverse perspectives and making standout footage simple to create.    DUAL PROTECTION FOR SAFE FLIGHT Omnidirectional obstacle sensing [2] and full‑coverage propeller guards deliver dual protection for worry‑free flights. Capture life’s moments effortlessly while enjoying the freedom of flight.   COMPLETE PROTECTION, EASY FOR BEGINNERS The omnidirectional monocular vision system, combined with forward-facing LiDAR and a downward infrared sensing system, detects obstacles in real time for safe, confident flying. The integrated propeller guard design provides all-around protection, giving beginners peace of mind when operating the drone. Omnidirectional Obstacle Sensing [2]With the new omnidirectional obstacle sensing feature [2], Neo 2 can detect and avoid obstacles when tracking from the front or sides, so even beginners can operate the drone with ease, stability, and confidence. Versatile Flight [6]Neo 2 supports versatile flight [6], with enhanced hovering and positioning capabilities over Neo, making it easier to navigate challenging environments like indoors, near buildings, over water, or on snow. Full-Coverage Propeller GuardsA lightweight body paired with an integrated propeller guard design makes flying and carrying safer and more agile, so every journey is secure and worry-free.   CREATE WITH EASE AND EFFICIENCY Internal Storage49GB internal storage supports long 4K video recording [7], allowing uninterrupted content capture.  Power ReplenishmentConnect the drone directly to a power source using a USB-C data cable for convenient charging. Neo 2’s Two-Way Charging Hub can charge three batteries simultaneously [17], increasing both charging speed and efficiency. QuickTransferWith file transfer speeds up to 80 MB/s [18], stunning footage is available instantly. Return to Home (RTH) Don’t worry about returning home; when using palm takeoff or mobile app control, Neo 2 will return to the home point after completing its course. When using a remote controller or immersive motion control, Neo 2 supports Return to Home (RTH) and Failsafe RTH, activating obstacle avoidance during the return for enhanced safety and beginner-friendly operation. 19-Min Flight Time [19]With up to 19 minutes of flight time [19], Neo 2 can perform over 20 excursions [20] to and from your palm in succession, documenting life’s little moments with its sleek design and reliable flight duration. Wind ResistanceHover stably in winds up to 10.7 m/s for dependable outdoor capture.       Notes* All videos and images on this page were shot using DJI Neo 2 by professionals in strict compliance with local laws and regulations and have been variously edited in post-production. All videos and images are for reference only. Actual results may vary. Always observe local laws and regulations and ensure the drone has obtained relevant certifications and airspace authorizations before flying.** All data was tested using a production model DJI Neo 2 in a controlled environment. Actual experience may vary depending on the environment, usage, and firmware version.*** All images, videos, and screen display contents about the product itself on this page are for reference only. Actual product effects (including but not limited to appearance, color, size) and screen display contents (including but not limited to backgrounds, UI, and illustrations) may vary. As of November 2025, DJI Neo 2 is the most compact drone in DJI’s lineup to feature omnidirectional obstacle sensing. The omnidirectional vision system only assists flight safety under certain conditions and is not a substitute for your own judgment and control. During a flight, always pay attention to the surrounding environment and the warnings on the DJI Fly app, and be responsible for and maintain control of the drone at all times. The best positioning altitude range of the vision positioning system is 0.5 to 10 m when using the system when GNSS signals are unavailable. The vision positioning performance may decrease when flying beyond this range. Fly with caution. The vision system may not function properly when the drone is flying over water, which may prevent it from actively avoiding water surfaces below when landing. Operators should maintain control of the drone at all times, make operational decisions based on an assessment of the surrounding environment, and avoid relying solely on the vision system. The vision system cannot detect certain objects or surfaces, including large structures with frames and cables (e.g., tower cranes, high‑voltage transmission towers, high‑voltage transmission lines, cable‑stayed bridges); surfaces with no texture or sparse texture; surfaces with repetitive identical patterns or textures (e.g., small tiles of the same color); solid‑colored surfaces (e.g., pure black, pure white, pure red, pure green); strongly reflective or mirrored surfaces (e.g., ice, road signs); water or transparent surfaces; surfaces of moving objects (e.g., above moving crowds, above waving shrubs or grass); moving obstacles (e.g., walking people, moving vehicles); scenes with drastic lighting changes; surfaces that are extremely dark (e.g., less than 1 lux) or extremely bright (e.g., more than 100,000 lux);materials with strong infrared absorption or reflection properties (e.g., mirrors, glass, road signs, asphalt); small obstacles (e.g., fences, branches, power lines); and thin poles or small vertical objects (e.g., utility poles, street lamps). Do not obstruct or interfere with the sensing system under any circumstances. Ensure that all lenses remain clear, free from dirt, smudges, or other contaminants, and are not scratched. Vision system cameras may need to be calibrated after being stored for an extended period. A prompt will appear in the DJI Fly app and calibration will be performed automatically. Do not fly when it is rainy, smoggy, or the visibility is lower than 100 m. Before takeoff, inspect the sensing system’s glass surfaces. Remove any protective film, stickers, or other obstructions. If water droplets, fingerprints, or smudges are present, clean the glass using a lint‑free cloth. Do not use alcohol or other organic solvents. If the glass surface is loose, broken, scratched, or worn, send the drone to an authorized service center for repair. Refer to the product’s user manual for more details. Follow these conditions and precautions when using gesture control: Ensure the surrounding environment is safe when using this feature, and avoid moving people, animals, or vehicles. Do not use gesture control in areas with small or thin objects (e.g., branches or power lines), transparent objects (e.g., glass or water), or solid‑colored surfaces (e.g., white walls). Use this feature only in environments with suitable lighting. Gesture control will not function when ambient light is below 5 lux or above 100,000 lux. Gesture control is supported only in Spotlight or Follow mode, and is not supported when using the remote controller or motion controller. Keep the drone approximately 2 to 5 m from the operator when using this feature. Keep your fingers fully extended when using this feature. Gesture control won’t work with thick gloves or mittens, and the subject should be completely visible in the camera frame without any obstructions. When using Return to Palm, maintain a horizontal distance of 2 to 5 m between the drone and your palm, and a vertical distance of no more than 2 m. If the function does not respond at close range, adjust the drone’s position via gesture control or move yourself to avoid visual blind spots before trying again. To make the drone fly back by raising one arm, keep it within 10 m horizontally from your arm, ensure your arm is fully extended when raised, and do not raise both arms simultaneously, as this will prevent the drone from flying back. It is recommended to use the ActiveTrack feature in open environments. Refer to the user manual for unsupported scenarios or scenarios that may potentially interrupt recording. In complex environments with many obstacles, exercise caution when using Auto mode to ensure flight safety and personal safety. When using palm takeoff and landing, adhere to the following guidelines: operate in a windless environment as much as possible; extend your palm horizontally and keep it still, avoiding finger contact with the propellers to prevent injury; do not attempt to grab the drone while it is flying. Versatile flight refers to DJI Neo 2’s ability to fly both indoors and outdoors, with greatly enhanced performance compared to DJI Neo, especially in conditions like flying over water or snow. Always ensure compliance with local laws and regulations, certification requirements, and airspace authorizations, and make sure you understand and have obtained all necessary permissions before operating the drone. Flight performance may decrease if the drone is flown near solid-colored, transparent, or low-texture surfaces under weak GNSS signal conditions. Always fly with caution in well-lit environments. When flying over water, maintain an altitude of at least 1 m to ensure safety. Refer to the product’s user manual for more details. The maximum resolution in vertical shooting mode is 2.7K. Requires DJI Goggles N3 or DJI Goggles 3, along with DJI RC Motion 3 or DJI FPV Remote Controller 3. When using DJI Neo 2, comply with local laws and regulations and ensure flight safety. Supports English and Mandarin only. Requires connecting DJI Neo 2 to a mobile phone via Wi-Fi. Refer to the DJI Fly app download page for mobile device compatibility and the Bluetooth Device Compatibility List for Bluetooth compatibility. Requires DJI Neo 2 Digital Transceiver, along with the designated remote controller and goggles. These can be obtained by purchasing specific combos or by buying the designated items separately. The 10km video transmission distance can only be achieved with FCC compliance. Measured in an unobstructed outdoor environment free of interference using the remote controller or goggles and showed the farthest communication range for one-way, non-return flights under each standard. The maximum video transmission distance in the actual flight scenarios is limited by the drone’s maximum flight distance. Always pay attention to RTH reminders on the live view during your flight. Maximum speed measured in an open, windless environment, with the drone taking off from an altitude of 0 m and controlled via remote controller. Data are for reference only. 4K/100fps slow-motion video recording is only supported when using the remote controller or motion controller. The stabilization switch (On/Off) is only available when paired with goggles. When stabilization is turned off, footage captured supports offline stabilization with Gyroflow. The number of batteries that can be charged simultaneously depends on the power of the charger used. Using a charger rated above 45 W allows you to charge three batteries at the same time. Using a charger rated between 30 W and 45 W allows you to charge only two batteries simultaneously. Using a charger below 30 W will charge the batteries sequentially, from the highest remaining charge to the lowest. Refer to the charging protocols supported by the charger. Measured in a laboratory environment with little interference in countries/regions that support both 2.4 GHz and 5.8 GHz. Download speeds may vary depending on the actual conditions. Measured when flying forward at a speed of 4 m/s in a windless environment 20 m above sea level, without DJI Neo 2 Digital Transceiver, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version. Measured after DJI Neo 2 is activated, with a fully charged battery and default settings, and using Circle, Rocket, and Dronie modes, and is for reference only. The measured weight excludes DJI Neo 2 Digital Transceiver. The actual product weight may vary due to differences in batch materials and external factors. The actual product weight may vary due to differences in batch materials and external factors. Measured when flying forward at a speed of 2 m/s in a windless environment 20 m above sea level, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version. Measured in an open outdoor environment free of interference. Actual video transmission distance may vary depending on the operating environment and mobile device performance. Refer to the actual experience. PRODUCT SPECIFICATIONS AIRCRAFT Takeoff Weight: 151 g (without DJI Neo 2 Digital Transceiver)160 g (with DJI Neo 2 Digital Transceiver)The actual product weight may vary due to differences in batch materials and external factors.Dimensions: 147×171×41 mm (L×W×H, with propeller guards and without DJI Neo 2 Digital Transceiver)167×171×54 mm (L×W×H, with propeller guards and DJI Neo 2 Digital Transceiver)Max Ascent Speed: 0.5 m/s (Cine mode)3 m/s (Normal mode)5 m/s (Sport Mode)Maximum speed measured in an open, windless environment, with the drone taking off from an altitude of 0 m and controlled via remote controller. Data are for reference only.Max Descent Speed: 0.5 m/s (Cine Mode)3 m/s (Normal Mode)3 m/s (Sport Mode)Maximum speed measured in an open, windless environment, with the drone taking off from an altitude of 0 m and controlled via remote controller. Data are for reference only.Max Horizontal Speed: 8 m/s (Normal Mode)12 m/s (Sport Mode)12 m/s (tracking status)Maximum speed measured in an open, windless environment, with the drone taking off from an altitude of 0 m and controlled via remote controller. Data are for reference only.Max Takeoff Altitude: 2000 mMeasured in a windless environment when taking off from an altitude of 2000 m and ascending vertically by 120 m, using Sport mode, and from 100% battery level until 20%. Data is for reference only. Always pay attention to reminders on the camera view during your flight.Max Flight Time: Approx. 19 minutes (approx. 17 minutes with the propeller guards)*Each battery allows the drone to perform at least 20 palm takeoff and landing for shoots in succession*** Measured when flying forward at a speed of 4 m/s in a windless environment 20 m above sea level, without DJI Neo 2 Digital Transceiver, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version.** Measured after DJI Neo 2 is activated, with a fully charged battery and default settings, and using Circle, Rocket, and Dronie modes, and is for reference only.Max Hovering Time: Approx. 18 minutes (16.5 minutes with the propeller guards)Measured when hovering in a windless environment 20 m above sea level, without DJI Neo 2 Digital Transceiver, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version.Max Flight Distance: 7 kmMeasured when flying forward at a speed of 9 m/s in a windless environment 20 m above sea level, without DJI Neo 2 Digital Transceiver, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version.Max Wind Speed Resistance: 10.7 m/s (Level 5)Operating Temperature: -10° to 40° C (14° to 104° F)Global Navigation Satellite System: GPS + Galileo + BeiDouHovering Accuracy Range: Vertical:±0.1 m (with vision positioning)±0.5 m (with satellite positioning)Horizontal:±0.3 m (with vision positioning)±1.5 m (with satellite positioning)Internal Storage: 49 GBClass: C0 (EU)  CAMERA Image Sensor: 1/2-inch CMOS SensorLens: FOV: 119.8°Format Equivalent: 16.5 mmAperture: f/2.2Focus: 0.7 m to ∞ISO Range: Photo100-3200 (Single Auto)100-12800 (Burst Auto/Timed Auto) 100-12800 (Manual)Video100-12800 (Auto)100-12800 (Manual)Shutter Speed: Video: 1/8000-1/30 sPhoto: 1/8000-1/10 sMax Image Size: 12 MP Photo4000×3000 (4:3)4000×2250 (16:9)Still Photography Modes: Single/Timed ShotSingle Shot: 12 MPTimed Shot: 12 MP, 2/3/5/7/10/15/20/30/60 sPhoto Format: JPEGVideo Resolution: Horizontal Shooting:4K (4:3): 3840×2880@60/50/30fps1080p (4:3): 1440×1080@60/50/30fps4K (16:9): 3840×2160@100*/60/50/30fps1080p (16:9): 1920×1080@100*/60/50/30fpsVertical Shooting:2.7K (9:16): 1512×2688@60/50/30fps* 4K/100fps and 1080p/100fps recording are only supported when using motion control or remote control.Video Format: MP4Max Video Bitrate: 80 MbpsSupported File System: exFATColor Mode: NormalEIS: Supports RockSteady and turning stabilization off.** The stabilization switch (On/Off) is only available when paired with goggles. When stabilization is turned off, footage captured supports offline stabilization with Gyroflow.  GIMBAL Stabilization: 2-axis mechanical gimbal (tilt, roll)Mechanical Range: Tilt: -125° to 105°Roll: -43° to 43°Controllable Range: Tilt: -90° to 70°Max Control Speed (tilt): 100°/sAngular Vibration Range: ±0.01°Image Roll Correction:  Supports correction of footage recorded on the droneLive view correction is unavailable only when using with goggles  SENSING Sensing Type: Omnidirectional monocular vision system, paired with a downward infrared sensing system and forward-facing LiDARForward: Measurement Range: 0.5-10 m Detection Range: 0.5-15 m Effective Sensing Speed: Flight Speed ≤ 8 m/sBackward: Detection Range: 0.5-15 m Effective Sensing Speed: Flight Speed ≤ 8 m/sLateral: Detection Range: 0.5-15 m Effective Sensing Speed: Flight Speed ≤ 8 m/sUpward: Detection Range: 0.5-15 m Effective Sensing Speed: Flight Speed ≤ 3 m/sDownward: Detection Range: 0.5-15 m Effective Sensing Speed: Flight Speed ≤ 3 m/sInfrared Sensor: Forward-Facing LiDAR:Measurement Range: 0.3-8 m (reflectivity > 10%)FOV: Horizontal 60°, Vertical 60°Downward-Facing Infrared Sensor:Measurement Range: 0.3-8 m (reflectivity > 10%)Operating Environment: Forward, Backward, Left, Right, and Upward:Surfaces with discernible patterns and adequate lighting (lux > 5)Downward:Surfaces with discernible patterns and adequate lighting (lux > 5), and surfaces that are diffusely reflective with a reflectivity above 20% (e.g., walls, trees, people).  VIDEO TRANSMISSION Video Transmission System: Standard: Wi-Fi Video TransmissionOptional: DJI Neo 2 Digital Transceiver (O4)Live View Quality: With DJI RC-N3 Remote Controller: Up to 1080p/60fpsWith DJI Goggles N3 plus DJI RC Motion 3/DJI FPV Remote Controller 3: Up to 1080p/60fpsWith DJI Goggles 3 plus DJI RC Motion 3/DJI FPV Remote Controller 3: Up to 1080p/100fpsOperating Frequency: 2.400 GHz to 2.4835 GHz5.170 GHz to 5.250 GHz5.725 GHz to 5.850 GHzOperating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.Transmitter Power (EIRP): 2.4 GHz:< 26 dBm (FCC)< 20 dBm (CE/SRRC/MIC)5.1 GHz:< 23 dBm (CE)5.8 GHz:< 26 dBm (FCC)< 14 dBm (CE)< 26 dBm (SRRC)Communication Bandwidth: Max 60 MHzMax Transmission Distance (unobstructed, free of interference): FCC: 10 kmCE: 6 kmSRRC: 6 kmMIC: 6 kmMeasured in an unobstructed outdoor environment free of interference using the remote controller or goggles and showed the farthest communication range for one-way, non-return flights under each standard. The maximum video transmission distance in the actual flight scenarios is limited by the drone's maximum flight distance. Always pay attention to RTH reminders on the live view during your flight.Max Transmission Distance (unobstructed, with interference): Strong Interference: Urban landscape, approx. 1.5-3 kmMedium Interference: Suburban landscape, approx. 3-6 kmLow Interference: Suburb/Seaside, approx. 6-10 kmMeasured under FCC standard in unobstructed environments with typical interference, using the remote controller or goggles. Used for reference purposes only and provides no guarantee for actual transmission distance.Max Transmission Distance (obstructed, with interference): Low Interference and Obstructed by Buildings: Approx. 0-0.5 kmLow Interference and Obstructed by Trees: Approx. 0.5-3 kmMeasured under FCC standard in obstructed environments with typical low interference, using the remote controller or goggles. Used for reference purposes only and provides no guarantee for actual transmission distance.Max Download Speed: Wi-Fi: 80 MB/sMeasured in a laboratory environment with little interference in countries/regions that support both 2.4 GHz and 5.8 GHz. Download speeds may vary depending on the actual conditions.Lowest Latency: With DJI RC-N3 Remote Controller or DJI RC 2 Remote Controller: Approx. 120 msWith DJI Goggles N3 (1080p/60fps Video Transmission): Lowest latency at 54 msWith DJI Goggles 3 (1080p/100fps Video Transmission): Lowest latency at 50 msLatency data refers to the minimum delay during goggles screen refresh, measured in an open, interference‑free environment. Actual performance may vary with shooting conditions and mobile device.Max Video Bitrate: 60 MbpsAntenna: 2 antennas, 1T2R  WI-FI Protocol: 802.11a/b/g/n/ac/axOperating Frequency: 2.400 GHz to 2.4835 GHz5.725 GHz to 5.850 GHzOperating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.Transmitter Power (EIRP): 2.4 GHz:< 20 dBm (FCC/CE/SRRC/MIC)5.8 GHz:< 26 dBm (FCC/SRRC)< 14 dBm (CE)Effective Operating Range: 500 mMeasured in an open outdoor environment free of interference. Actual video transmission distance may vary depending on the operating environment and mobile device performance. Refer to the actual experience.  BLUETOOTH Protocol: Bluetooth 5.2Operating Frequency: 2.400 GHz to 2.4835 GHzOperating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.Transmitter Power (EIRP): < 10 dBm  BATTERY Capacity: 1606 mAhWeight: 46 gNominal Voltage: 7.16 VMax Charging Voltage: 8.6 VBattery Type: Li-ionChemical System: LiNiMnCoO2Energy: 11.5 WhCharging Temperature: 5° to 40° C (41° to 104° F)Charging Time: When Using the Two-Way Charging Hub (65W max charging power): Approx. 68 minutes to charge three batteries simultaneously from 0% to 100% When Directly Charging the Aircraft Body (15W max charging power): Approx. 70 minutes to charge from 0% to 100% Charging time is measured in a test environment with a temperature of 25° C (77° F). Actual charging time may increase due to higher ambient temperatures or variations in mains voltage between regions.  CHARGER Recommended Charger: DJI 65W Portable ChargerUSB Power Delivery chargers  BATTERY CHARGING HUB Input: 5 V, max 5 A9 V, max 5 A12 V, max 5 A15 V, max 4.33 A20 V, max 3.25 AMax current depends on adapter capability.Output (charging): 5 V, 2 ACharging Method: 3 batteries charged simultaneouslyThe number of batteries that can be charged simultaneously depends on the power of the charger used. Using a charger rated above 45 W allows you to charge three batteries at the same time. Using a charger rated between 30 W and 45 W allows you to charge only two batteries simultaneously. Using a charger below 30 W will charge the batteries sequentially, from the highest remaining charge to the lowest. Refer to the charging protocols supported by the charger.Compatibility: DJI Neo 2 Intelligent Flight Battery  STORAGE Recommended microSD Cards: Does not support storage expansion with an external SD card  DJI RC-N3 REMOTE CONTROLLER Max Operating Time: Without charging any mobile device: 3.5 hoursWhen charging a mobile device: 1.5 hoursOperating Temperature: -10° to 40° C (14° to 104° F)Charging Temperature: 5° to 40° C (41° to 104° F)Charging Time: 2 hoursCharging Method: 5 V, 2 ABattery Capacity: 2600 mAhWeight: Approx. 320 gDimensions: 104.2×150×45.2 mm (L×W×H)Operating Frequency: 2.400 GHz to 2.4835 GHz5.170 GHz to 5.250 GHz5.725 GHz to 5.850 GHzOperating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.Transmitter Power (EIRP): 2.4 GHz:< 33 dBm (FCC)< 20 dBm (CE/SRRC/MIC)5.1 GHz:< 23 dBm (CE)5.8 GHz:< 33 dBm (FCC)< 14 dBm (CE)< 30 dBm (SRRC) IN THE BOX DJI Neo 2 Aircraft × 1DJI RC-N3 Remote Controller × 1DJI RC-N Series RC Cable (USB-C Connector) × 1DJI RC-N Series RC Cable (Lightning Connector) × 1DJI Neo 2 Intelligent Flight Battery × 3DJI Neo 2 Two-Way Charging Hub × 1DJI Neo 2 Spare Propellers (Pair) × 1DJI Neo 2 Spare Propeller Screw × 4Screwdriver × 1DJI Neo 2 Propeller Guard (Pair) × 1DJI Neo 2 Digital Transceiver × 1DJI Neo 2 Gimbal Protector × 1USB-C to USB-C Data Cable × 1Documents (Quick Start Guide, Safety Guidelines, and DJI Logo Stickers) × 1

Read more less

DJI Neo 2 is DJI’s most compact drone [1] equipped with omnidirectional obstacle sensing [2] and features such as gesture control [3], SelfieShot, and ActiveTrack [4] for more creative ways to fly. Even beginners can get started effortlessly. Think of it as your personal follow-me camera drone, always ready to capture your most exciting moments.   MASTER FLIGHT WITH EASE DJI Neo 2 features an onboard display for intuitive shooting mode selection. To launch, point it at yourself and press the takeoff button with one hand to take off directly from your palm [5], then perform automatic camera movements. The new Return-to-Palm feature [3] allows Neo 2 to precisely locate your palm, return safely, and land steadily, making flights easier than ever.    MORE WAYS TO CONTROL, MORE FUN Neo 2 can follow you effortlessly even without a remote controller, ensuring every exciting moment is captured. Pair it with DJI RC-N3 or RC 2 remote controller for easy-to-start aerial flights. Put on DJI goggles and use the motion controller for immersive FPV flights [8]. The fun never stops! Gesture Control [3]Easily adjust Neo 2’s direction and proximity with one or both hands [3]. Point your palm toward the drone to guide it up, down, or side to side, or use both palms for precise control over proximity. No remote controller is needed for camera angle adjustment. Voice Control via Mobile [9][10]Neo 2 supports voice control [9][10], so you can send flying commands using your smartphone or Bluetooth earphones [11] with complete freedom, whether on a run or cycling. When connected to your phone, it can capture audio and intelligently reduce noise, automatically filtering out propeller noise. This feature enables you to record content independently on your own. Mobile App Control [10]Control Neo 2 with virtual joysticks on the DJI Fly app interface and quickly delve into the joy of flying with no need for a separate purchase of a remote controller. RC Control [12]When paired with DJI RC-N3 remote controller, Neo 2 can achieve a maximum video transmission distance of 10 km [13]. Flexibly operate the camera using traditional RC control sticks when you need to capture professional-level shots. Motion Control [12]When paired with the motion controller and goggles, Neo 2 supports motion control, Easy ACRO, offering an immersive FPV experience.   SMART CAPTURE FOR SHARP RESULTS DJI Neo 2 supports ActiveTrack [4] and SelfieShot, automatically framing subjects for smooth, hands-free shooting from start to finish. Multiple intelligent shooting modes unlock fresh perspectives and spark creativity in seconds. Combined with 4K video recording [7], Neo 2 delivers crisp, detailed, cinematic-quality footage.   FASTER, SMOOTHER TRACKING WITH ACTIVETRACK [4] With enhanced tracking performance, Neo 2 enables smooth and stable tracking for running, cycling, and more. In open areas, it can track at speeds of up to 12 m/s [14], offering faster response and improved stability. Faster Tracking SpeedWith a maximum tracking speed of 12 m/s [14], Neo 2 smoothly follows you even during running or cycling. Added omnidirectional obstacle sensing [2] ensures safer tracking from the front and sides, allowing you to capture fast-motion moments with ease.12 m/s [14] Maximum tracking speed More Tracking DirectionsEight-direction tracking (forward, backward, left, right, and four diagonals) enables smoother, more natural follow shots and expands creative possibilities. In complex environments, the drone can switch to rear tracking mode, steadily keeping the subject in focus and enabling creative freedom with confidence.   EASY MOMENT CAPTURE WITH SELFIESHOT Capture solo or group moments hands-free with SelfieShot, which lets you effortlessly switch between waist-up, full-body, and long shots without a tripod or any extra assistance. Whether it’s birthday parties, weekend picnics, or family outings, Neo 2 automatically composes every scene and maneuvers the camera as needed to capture your cherished moments with just a tap.   4K HIGH-QUALITY IMAGING [7] Neo 2 features a 12MP, 1/2-inch CMOS sensor with an f/2.2 aperture and high-performance image processor for clearer, low-noise footage. Shoot in 4K/60fps video, 4K/100fps slow motion [15], and 2.7K vertical video, all stabilized by a 2-axis gimbal. Stunning Footage Neo 2 captures impressive footage with true-to-life image quality. 4K Video [7]Neo 2 records 4K/60fps video and 4K/100fps slow-motion [15], delivering smooth and clear results. Portrait OptimizationFeaturing DJI’s portrait optimization technology, Neo 2 enhances portraits’ brightness, contrast, and skin tones, showcasing naturally radiant skin with vivid, lifelike expressions. 2.7K Vertical ShootingNeo 2 supports 2.7K vertical video recording, ideal for social media sharing. Enhanced StabilizationThe 2-axis gimbal works with Electronic Image Stabilization (EIS) [16] to deliver smooth, stabilized footage in any scenario.   SMART MODES, STUNNING SHOTS Neo 2 supports intelligent shooting modes such as Dolly Zoom, QuickShots, and MasterShots, offering diverse perspectives and making standout footage simple to create.    DUAL PROTECTION FOR SAFE FLIGHT Omnidirectional obstacle sensing [2] and full‑coverage propeller guards deliver dual protection for worry‑free flights. Capture life’s moments effortlessly while enjoying the freedom of flight.   COMPLETE PROTECTION, EASY FOR BEGINNERS The omnidirectional monocular vision system, combined with forward-facing LiDAR and a downward infrared sensing system, detects obstacles in real time for safe, confident flying. The integrated propeller guard design provides all-around protection, giving beginners peace of mind when operating the drone. Omnidirectional Obstacle Sensing [2]With the new omnidirectional obstacle sensing feature [2], Neo 2 can detect and avoid obstacles when tracking from the front or sides, so even beginners can operate the drone with ease, stability, and confidence. Versatile Flight [6]Neo 2 supports versatile flight [6], with enhanced hovering and positioning capabilities over Neo, making it easier to navigate challenging environments like indoors, near buildings, over water, or on snow. Full-Coverage Propeller GuardsA lightweight body paired with an integrated propeller guard design makes flying and carrying safer and more agile, so every journey is secure and worry-free.   CREATE WITH EASE AND EFFICIENCY Internal Storage49GB internal storage supports long 4K video recording [7], allowing uninterrupted content capture.  Power ReplenishmentConnect the drone directly to a power source using a USB-C data cable for convenient charging. Neo 2’s Two-Way Charging Hub can charge three batteries simultaneously [17], increasing both charging speed and efficiency. QuickTransferWith file transfer speeds up to 80 MB/s [18], stunning footage is available instantly. Return to Home (RTH) Don’t worry about returning home; when using palm takeoff or mobile app control, Neo 2 will return to the home point after completing its course. When using a remote controller or immersive motion control, Neo 2 supports Return to Home (RTH) and Failsafe RTH, activating obstacle avoidance during the return for enhanced safety and beginner-friendly operation. 19-Min Flight Time [19]With up to 19 minutes of flight time [19], Neo 2 can perform over 20 excursions [20] to and from your palm in succession, documenting life’s little moments with its sleek design and reliable flight duration. Wind ResistanceHover stably in winds up to 10.7 m/s for dependable outdoor capture.       Notes* All videos and images on this page were shot using DJI Neo 2 by professionals in strict compliance with local laws and regulations and have been variously edited in post-production. All videos and images are for reference only. Actual results may vary. Always observe local laws and regulations and ensure the drone has obtained relevant certifications and airspace authorizations before flying.** All data was tested using a production model DJI Neo 2 in a controlled environment. Actual experience may vary depending on the environment, usage, and firmware version.*** All images, videos, and screen display contents about the product itself on this page are for reference only. Actual product effects (including but not limited to appearance, color, size) and screen display contents (including but not limited to backgrounds, UI, and illustrations) may vary. As of November 2025, DJI Neo 2 is the most compact drone in DJI’s lineup to feature omnidirectional obstacle sensing. The omnidirectional vision system only assists flight safety under certain conditions and is not a substitute for your own judgment and control. During a flight, always pay attention to the surrounding environment and the warnings on the DJI Fly app, and be responsible for and maintain control of the drone at all times. The best positioning altitude range of the vision positioning system is 0.5 to 10 m when using the system when GNSS signals are unavailable. The vision positioning performance may decrease when flying beyond this range. Fly with caution. The vision system may not function properly when the drone is flying over water, which may prevent it from actively avoiding water surfaces below when landing. Operators should maintain control of the drone at all times, make operational decisions based on an assessment of the surrounding environment, and avoid relying solely on the vision system. The vision system cannot detect certain objects or surfaces, including large structures with frames and cables (e.g., tower cranes, high‑voltage transmission towers, high‑voltage transmission lines, cable‑stayed bridges); surfaces with no texture or sparse texture; surfaces with repetitive identical patterns or textures (e.g., small tiles of the same color); solid‑colored surfaces (e.g., pure black, pure white, pure red, pure green); strongly reflective or mirrored surfaces (e.g., ice, road signs); water or transparent surfaces; surfaces of moving objects (e.g., above moving crowds, above waving shrubs or grass); moving obstacles (e.g., walking people, moving vehicles); scenes with drastic lighting changes; surfaces that are extremely dark (e.g., less than 1 lux) or extremely bright (e.g., more than 100,000 lux);materials with strong infrared absorption or reflection properties (e.g., mirrors, glass, road signs, asphalt); small obstacles (e.g., fences, branches, power lines); and thin poles or small vertical objects (e.g., utility poles, street lamps). Do not obstruct or interfere with the sensing system under any circumstances. Ensure that all lenses remain clear, free from dirt, smudges, or other contaminants, and are not scratched. Vision system cameras may need to be calibrated after being stored for an extended period. A prompt will appear in the DJI Fly app and calibration will be performed automatically. Do not fly when it is rainy, smoggy, or the visibility is lower than 100 m. Before takeoff, inspect the sensing system’s glass surfaces. Remove any protective film, stickers, or other obstructions. If water droplets, fingerprints, or smudges are present, clean the glass using a lint‑free cloth. Do not use alcohol or other organic solvents. If the glass surface is loose, broken, scratched, or worn, send the drone to an authorized service center for repair. Refer to the product’s user manual for more details. Follow these conditions and precautions when using gesture control: Ensure the surrounding environment is safe when using this feature, and avoid moving people, animals, or vehicles. Do not use gesture control in areas with small or thin objects (e.g., branches or power lines), transparent objects (e.g., glass or water), or solid‑colored surfaces (e.g., white walls). Use this feature only in environments with suitable lighting. Gesture control will not function when ambient light is below 5 lux or above 100,000 lux. Gesture control is supported only in Spotlight or Follow mode, and is not supported when using the remote controller or motion controller. Keep the drone approximately 2 to 5 m from the operator when using this feature. Keep your fingers fully extended when using this feature. Gesture control won’t work with thick gloves or mittens, and the subject should be completely visible in the camera frame without any obstructions. When using Return to Palm, maintain a horizontal distance of 2 to 5 m between the drone and your palm, and a vertical distance of no more than 2 m. If the function does not respond at close range, adjust the drone’s position via gesture control or move yourself to avoid visual blind spots before trying again. To make the drone fly back by raising one arm, keep it within 10 m horizontally from your arm, ensure your arm is fully extended when raised, and do not raise both arms simultaneously, as this will prevent the drone from flying back. It is recommended to use the ActiveTrack feature in open environments. Refer to the user manual for unsupported scenarios or scenarios that may potentially interrupt recording. In complex environments with many obstacles, exercise caution when using Auto mode to ensure flight safety and personal safety. When using palm takeoff and landing, adhere to the following guidelines: operate in a windless environment as much as possible; extend your palm horizontally and keep it still, avoiding finger contact with the propellers to prevent injury; do not attempt to grab the drone while it is flying. Versatile flight refers to DJI Neo 2’s ability to fly both indoors and outdoors, with greatly enhanced performance compared to DJI Neo, especially in conditions like flying over water or snow. Always ensure compliance with local laws and regulations, certification requirements, and airspace authorizations, and make sure you understand and have obtained all necessary permissions before operating the drone. Flight performance may decrease if the drone is flown near solid-colored, transparent, or low-texture surfaces under weak GNSS signal conditions. Always fly with caution in well-lit environments. When flying over water, maintain an altitude of at least 1 m to ensure safety. Refer to the product’s user manual for more details. The maximum resolution in vertical shooting mode is 2.7K. Requires DJI Goggles N3 or DJI Goggles 3, along with DJI RC Motion 3 or DJI FPV Remote Controller 3. When using DJI Neo 2, comply with local laws and regulations and ensure flight safety. Supports English and Mandarin only. Requires connecting DJI Neo 2 to a mobile phone via Wi-Fi. Refer to the DJI Fly app download page for mobile device compatibility and the Bluetooth Device Compatibility List for Bluetooth compatibility. Requires DJI Neo 2 Digital Transceiver, along with the designated remote controller and goggles. These can be obtained by purchasing specific combos or by buying the designated items separately. The 10km video transmission distance can only be achieved with FCC compliance. Measured in an unobstructed outdoor environment free of interference using the remote controller or goggles and showed the farthest communication range for one-way, non-return flights under each standard. The maximum video transmission distance in the actual flight scenarios is limited by the drone’s maximum flight distance. Always pay attention to RTH reminders on the live view during your flight. Maximum speed measured in an open, windless environment, with the drone taking off from an altitude of 0 m and controlled via remote controller. Data are for reference only. 4K/100fps slow-motion video recording is only supported when using the remote controller or motion controller. The stabilization switch (On/Off) is only available when paired with goggles. When stabilization is turned off, footage captured supports offline stabilization with Gyroflow. The number of batteries that can be charged simultaneously depends on the power of the charger used. Using a charger rated above 45 W allows you to charge three batteries at the same time. Using a charger rated between 30 W and 45 W allows you to charge only two batteries simultaneously. Using a charger below 30 W will charge the batteries sequentially, from the highest remaining charge to the lowest. Refer to the charging protocols supported by the charger. Measured in a laboratory environment with little interference in countries/regions that support both 2.4 GHz and 5.8 GHz. Download speeds may vary depending on the actual conditions. Measured when flying forward at a speed of 4 m/s in a windless environment 20 m above sea level, without DJI Neo 2 Digital Transceiver, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version. Measured after DJI Neo 2 is activated, with a fully charged battery and default settings, and using Circle, Rocket, and Dronie modes, and is for reference only. The measured weight excludes DJI Neo 2 Digital Transceiver. The actual product weight may vary due to differences in batch materials and external factors. The actual product weight may vary due to differences in batch materials and external factors. Measured when flying forward at a speed of 2 m/s in a windless environment 20 m above sea level, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version. Measured in an open outdoor environment free of interference. Actual video transmission distance may vary depending on the operating environment and mobile device performance. Refer to the actual experience. PRODUCT SPECIFICATIONS AIRCRAFT Takeoff Weight: 151 g (without DJI Neo 2 Digital Transceiver)160 g (with DJI Neo 2 Digital Transceiver)The actual product weight may vary due to differences in batch materials and external factors.Dimensions: 147×171×41 mm (L×W×H, with propeller guards and without DJI Neo 2 Digital Transceiver)167×171×54 mm (L×W×H, with propeller guards and DJI Neo 2 Digital Transceiver)Max Ascent Speed: 0.5 m/s (Cine mode)3 m/s (Normal mode)5 m/s (Sport Mode)Maximum speed measured in an open, windless environment, with the drone taking off from an altitude of 0 m and controlled via remote controller. Data are for reference only.Max Descent Speed: 0.5 m/s (Cine Mode)3 m/s (Normal Mode)3 m/s (Sport Mode)Maximum speed measured in an open, windless environment, with the drone taking off from an altitude of 0 m and controlled via remote controller. Data are for reference only.Max Horizontal Speed: 8 m/s (Normal Mode)12 m/s (Sport Mode)12 m/s (tracking status)Maximum speed measured in an open, windless environment, with the drone taking off from an altitude of 0 m and controlled via remote controller. Data are for reference only.Max Takeoff Altitude: 2000 mMeasured in a windless environment when taking off from an altitude of 2000 m and ascending vertically by 120 m, using Sport mode, and from 100% battery level until 20%. Data is for reference only. Always pay attention to reminders on the camera view during your flight.Max Flight Time: Approx. 19 minutes (approx. 17 minutes with the propeller guards)*Each battery allows the drone to perform at least 20 palm takeoff and landing for shoots in succession*** Measured when flying forward at a speed of 4 m/s in a windless environment 20 m above sea level, without DJI Neo 2 Digital Transceiver, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version.** Measured after DJI Neo 2 is activated, with a fully charged battery and default settings, and using Circle, Rocket, and Dronie modes, and is for reference only.Max Hovering Time: Approx. 18 minutes (16.5 minutes with the propeller guards)Measured when hovering in a windless environment 20 m above sea level, without DJI Neo 2 Digital Transceiver, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version.Max Flight Distance: 7 kmMeasured when flying forward at a speed of 9 m/s in a windless environment 20 m above sea level, without DJI Neo 2 Digital Transceiver, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version.Max Wind Speed Resistance: 10.7 m/s (Level 5)Operating Temperature: -10° to 40° C (14° to 104° F)Global Navigation Satellite System: GPS + Galileo + BeiDouHovering Accuracy Range: Vertical:±0.1 m (with vision positioning)±0.5 m (with satellite positioning)Horizontal:±0.3 m (with vision positioning)±1.5 m (with satellite positioning)Internal Storage: 49 GBClass: C0 (EU)  CAMERA Image Sensor: 1/2-inch CMOS SensorLens: FOV: 119.8°Format Equivalent: 16.5 mmAperture: f/2.2Focus: 0.7 m to ∞ISO Range: Photo100-3200 (Single Auto)100-12800 (Burst Auto/Timed Auto) 100-12800 (Manual)Video100-12800 (Auto)100-12800 (Manual)Shutter Speed: Video: 1/8000-1/30 sPhoto: 1/8000-1/10 sMax Image Size: 12 MP Photo4000×3000 (4:3)4000×2250 (16:9)Still Photography Modes: Single/Timed ShotSingle Shot: 12 MPTimed Shot: 12 MP, 2/3/5/7/10/15/20/30/60 sPhoto Format: JPEGVideo Resolution: Horizontal Shooting:4K (4:3): 3840×2880@60/50/30fps1080p (4:3): 1440×1080@60/50/30fps4K (16:9): 3840×2160@100*/60/50/30fps1080p (16:9): 1920×1080@100*/60/50/30fpsVertical Shooting:2.7K (9:16): 1512×2688@60/50/30fps* 4K/100fps and 1080p/100fps recording are only supported when using motion control or remote control.Video Format: MP4Max Video Bitrate: 80 MbpsSupported File System: exFATColor Mode: NormalEIS: Supports RockSteady and turning stabilization off.** The stabilization switch (On/Off) is only available when paired with goggles. When stabilization is turned off, footage captured supports offline stabilization with Gyroflow.  GIMBAL Stabilization: 2-axis mechanical gimbal (tilt, roll)Mechanical Range: Tilt: -125° to 105°Roll: -43° to 43°Controllable Range: Tilt: -90° to 70°Max Control Speed (tilt): 100°/sAngular Vibration Range: ±0.01°Image Roll Correction:  Supports correction of footage recorded on the droneLive view correction is unavailable only when using with goggles  SENSING Sensing Type: Omnidirectional monocular vision system, paired with a downward infrared sensing system and forward-facing LiDARForward: Measurement Range: 0.5-10 m Detection Range: 0.5-15 m Effective Sensing Speed: Flight Speed ≤ 8 m/sBackward: Detection Range: 0.5-15 m Effective Sensing Speed: Flight Speed ≤ 8 m/sLateral: Detection Range: 0.5-15 m Effective Sensing Speed: Flight Speed ≤ 8 m/sUpward: Detection Range: 0.5-15 m Effective Sensing Speed: Flight Speed ≤ 3 m/sDownward: Detection Range: 0.5-15 m Effective Sensing Speed: Flight Speed ≤ 3 m/sInfrared Sensor: Forward-Facing LiDAR:Measurement Range: 0.3-8 m (reflectivity > 10%)FOV: Horizontal 60°, Vertical 60°Downward-Facing Infrared Sensor:Measurement Range: 0.3-8 m (reflectivity > 10%)Operating Environment: Forward, Backward, Left, Right, and Upward:Surfaces with discernible patterns and adequate lighting (lux > 5)Downward:Surfaces with discernible patterns and adequate lighting (lux > 5), and surfaces that are diffusely reflective with a reflectivity above 20% (e.g., walls, trees, people).  VIDEO TRANSMISSION Video Transmission System: Standard: Wi-Fi Video TransmissionOptional: DJI Neo 2 Digital Transceiver (O4)Live View Quality: With DJI RC-N3 Remote Controller: Up to 1080p/60fpsWith DJI Goggles N3 plus DJI RC Motion 3/DJI FPV Remote Controller 3: Up to 1080p/60fpsWith DJI Goggles 3 plus DJI RC Motion 3/DJI FPV Remote Controller 3: Up to 1080p/100fpsOperating Frequency: 2.400 GHz to 2.4835 GHz5.170 GHz to 5.250 GHz5.725 GHz to 5.850 GHzOperating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.Transmitter Power (EIRP): 2.4 GHz:< 26 dBm (FCC)< 20 dBm (CE/SRRC/MIC)5.1 GHz:< 23 dBm (CE)5.8 GHz:< 26 dBm (FCC)< 14 dBm (CE)< 26 dBm (SRRC)Communication Bandwidth: Max 60 MHzMax Transmission Distance (unobstructed, free of interference): FCC: 10 kmCE: 6 kmSRRC: 6 kmMIC: 6 kmMeasured in an unobstructed outdoor environment free of interference using the remote controller or goggles and showed the farthest communication range for one-way, non-return flights under each standard. The maximum video transmission distance in the actual flight scenarios is limited by the drone's maximum flight distance. Always pay attention to RTH reminders on the live view during your flight.Max Transmission Distance (unobstructed, with interference): Strong Interference: Urban landscape, approx. 1.5-3 kmMedium Interference: Suburban landscape, approx. 3-6 kmLow Interference: Suburb/Seaside, approx. 6-10 kmMeasured under FCC standard in unobstructed environments with typical interference, using the remote controller or goggles. Used for reference purposes only and provides no guarantee for actual transmission distance.Max Transmission Distance (obstructed, with interference): Low Interference and Obstructed by Buildings: Approx. 0-0.5 kmLow Interference and Obstructed by Trees: Approx. 0.5-3 kmMeasured under FCC standard in obstructed environments with typical low interference, using the remote controller or goggles. Used for reference purposes only and provides no guarantee for actual transmission distance.Max Download Speed: Wi-Fi: 80 MB/sMeasured in a laboratory environment with little interference in countries/regions that support both 2.4 GHz and 5.8 GHz. Download speeds may vary depending on the actual conditions.Lowest Latency: With DJI RC-N3 Remote Controller or DJI RC 2 Remote Controller: Approx. 120 msWith DJI Goggles N3 (1080p/60fps Video Transmission): Lowest latency at 54 msWith DJI Goggles 3 (1080p/100fps Video Transmission): Lowest latency at 50 msLatency data refers to the minimum delay during goggles screen refresh, measured in an open, interference‑free environment. Actual performance may vary with shooting conditions and mobile device.Max Video Bitrate: 60 MbpsAntenna: 2 antennas, 1T2R  WI-FI Protocol: 802.11a/b/g/n/ac/axOperating Frequency: 2.400 GHz to 2.4835 GHz5.725 GHz to 5.850 GHzOperating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.Transmitter Power (EIRP): 2.4 GHz:< 20 dBm (FCC/CE/SRRC/MIC)5.8 GHz:< 26 dBm (FCC/SRRC)< 14 dBm (CE)Effective Operating Range: 500 mMeasured in an open outdoor environment free of interference. Actual video transmission distance may vary depending on the operating environment and mobile device performance. Refer to the actual experience.  BLUETOOTH Protocol: Bluetooth 5.2Operating Frequency: 2.400 GHz to 2.4835 GHzOperating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.Transmitter Power (EIRP): < 10 dBm  BATTERY Capacity: 1606 mAhWeight: 46 gNominal Voltage: 7.16 VMax Charging Voltage: 8.6 VBattery Type: Li-ionChemical System: LiNiMnCoO2Energy: 11.5 WhCharging Temperature: 5° to 40° C (41° to 104° F)Charging Time: When Using the Two-Way Charging Hub (65W max charging power): Approx. 68 minutes to charge three batteries simultaneously from 0% to 100% When Directly Charging the Aircraft Body (15W max charging power): Approx. 70 minutes to charge from 0% to 100% Charging time is measured in a test environment with a temperature of 25° C (77° F). Actual charging time may increase due to higher ambient temperatures or variations in mains voltage between regions.  CHARGER Recommended Charger: DJI 65W Portable ChargerUSB Power Delivery chargers  BATTERY CHARGING HUB Input: 5 V, max 5 A9 V, max 5 A12 V, max 5 A15 V, max 4.33 A20 V, max 3.25 AMax current depends on adapter capability.Output (charging): 5 V, 2 ACharging Method: 3 batteries charged simultaneouslyThe number of batteries that can be charged simultaneously depends on the power of the charger used. Using a charger rated above 45 W allows you to charge three batteries at the same time. Using a charger rated between 30 W and 45 W allows you to charge only two batteries simultaneously. Using a charger below 30 W will charge the batteries sequentially, from the highest remaining charge to the lowest. Refer to the charging protocols supported by the charger.Compatibility: DJI Neo 2 Intelligent Flight Battery  STORAGE Recommended microSD Cards: Does not support storage expansion with an external SD card  DJI RC-N3 REMOTE CONTROLLER Max Operating Time: Without charging any mobile device: 3.5 hoursWhen charging a mobile device: 1.5 hoursOperating Temperature: -10° to 40° C (14° to 104° F)Charging Temperature: 5° to 40° C (41° to 104° F)Charging Time: 2 hoursCharging Method: 5 V, 2 ABattery Capacity: 2600 mAhWeight: Approx. 320 gDimensions: 104.2×150×45.2 mm (L×W×H)Operating Frequency: 2.400 GHz to 2.4835 GHz5.170 GHz to 5.250 GHz5.725 GHz to 5.850 GHzOperating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.Transmitter Power (EIRP): 2.4 GHz:< 33 dBm (FCC)< 20 dBm (CE/SRRC/MIC)5.1 GHz:< 23 dBm (CE)5.8 GHz:< 33 dBm (FCC)< 14 dBm (CE)< 30 dBm (SRRC) IN THE BOX DJI Neo 2 Aircraft × 1DJI Neo 2 Intelligent Flight Battery × 1DJI Neo 2 Spare Propellers (Pair) × 1DJI Neo 2 Spare Propeller Screw × 4Screwdriver × 1DJI Neo 2 Propeller Guard (Pair) × 1DJI Neo 2 Gimbal Protector × 1USB-C to USB-C Data Cable × 1Documents (Quick Start Guide, Safety Guidelines, and DJI Logo Stickers) × 1

Read more less

Why Choose BLUETTI Apex 300? A Power Ecosystem for Every Lifestyle Home Battery System From a simple plug-in setup to full-home battery backup, build the system that matches your home's size and energy needs. RV & Van Life Power From charging devices to running small appliances, enjoy home-like comfort with plug-and-play setups built for life on the road. True Off-Grid Freedom Store solar energy, run essentials, and stay connected — all with a setup that's easy to expand and customize for your off-grid lifestyle. Home Backup Power Solutions: Choose Your Protection Level Essential Protection Keep the basics running when the grid goes down — fridge, lights, WiFi, and more. Quick plug-and-play setup for instant peace of mind. Whole-Home Battery Backup Run high-demand appliances through long outages with 7,680W of reliable power. No hardwiring, just plug in and enjoy seamless, automatic backup. A Home Battery Backup That Pays for Itself Turn sunshine into serious savings. With up to 4,000W solar input*, the Apex 300 helps you cut down your energy bills fast — paying for itself in just 2 years. After that, the savings are all yours. * Requires a SolarX 4K. Flexible Power, Effortless Expansion The Apex 300 offers a modular design that grows with your needs. Connect 2–3 units and up to 18 batteries for up to 11.52kW output and 58kWh capacity. Start small, expand as needed, and customize your power system without complicated upgrades or extra hassle. Multiple Ways to Recharge, All Fast Solar Charging Get up to 80% in just 55 minutes, and a full charge in 75 minutes with 2,400W of solar power. With SolarX 4K, enjoy ultra-fast solar replenishment, reaching up to 30,000W.* * Requires 3 Apex 300 units and 3 SolarX 4K units. Note: Data tested by BLUETTI Labs. Actual charging times may vary. Generator Charging When solar power isn't an option, use a generator to fully charge your Apex 300 in 65 minutes with 3,450W of power. Stay ready no matter the conditions. Note: Data tested by BLUETTI Labs. Actual charging times may vary. TurboBoost AC Charging Need a quick boost? Enable Turbo Charging and get 80% in just 45 minutes, and a full charge in 70 minutes — all using just one standard home wall outlet. Note: Data tested by BLUETTI Labs. Actual charging times may vary. Charge on the Go ness your alternator's excess power — no waste, no impact on fuel or engine performance. Use 560W to fully charge in 5.5 hours. Add solar, and you can charge up to 1,760W, reaching full power in just 1.8 hours. Note: Data tested by BLUETTI Labs. Actual charging times may vary. Super-Fast Solar Charging With BLUETTI's SolarX 4K—the world's first 4,000W solar charge controller, you can harness 4kW–19.2kW of solar input. Easily integrate it with existing rooftop solar systems via AC coupling, making it perfect for DIY enthusiasts who want flexible, high-power charging. Apex 300 + B300K + SolarX 4K Fully charges in just 1.9 hours with 4,000W solar power, giving you quick access to energy for everyday devices like lights, small appliances, and electronics. Note: Data tested by BLUETTI Labs. Actual charging times may vary. 2/Apex 300 + 4/B300K + 2/SolarX 4K Powers up in 2.0 hours with 8,000W solar power, offering reliable energy for larger appliances, tools, and extended use — ideal for RVs or off-grid living. Note: Data tested by BLUETTI Labs. Actual charging times may vary. 3/Apex 300 + 9/B300K + 3/SolarX 4K Reaches full power in just 1.6 hours, providing ample energy for heavy-duty devices like air conditioners, refrigerators, or even home backup systems. Note: Data tested by BLUETTI Labs. Actual charging times may vary. Smart, Simpler Control with BLUETTI App With the BLUETTI app, you're always in control. Get early alerts to prepare for outages, track your energy savings, and monitor power backup status in real time. AI-powered features and quick OTA updates keep your system up-to-date. Plus, remote access lets you manage your home's power from anywhere, anytime, for ultimate convenience and peace of mind. Built for Durability and Efficiency With the EnerBalance AI system, enjoy up to 6,000 cycles with 80% capacity retention. Our magnetic-core transformer and five-stage efficiency tech cut idle loss to 20W, maximizing every charge. 20ms fast switching keeps sensitive devices like CPAP machines running without interruption. Plus, it's military-grade tested (MIL-STD-810G) for tough, long-lasting performance. Tech Specs BATTERY INFO Capacity 2764.8Wh (51.2V/54Ah) Type LiFePO₄ Life Cycles 6,000+ cycles to 80% original capacity Shelf-life Recharge to 40%-60% every 3-6 months Management System MPPT controller, BMS, etc. OUTPUT Inverter Type Pure sine wave Lifting Power 7,680W AC Outlets 3,840W Max. in total, 230V, 15A Max. each port Cigarette Lighter Port / DC5521 2 × 12V/10A; 24V/5A Cigarette lighter port 2 × 12V/10A; 24V/5A DC5521 * Requires a Hub D1 which is rated at 700W. USB-C Port 2 × 100W Max. * Requires a Hub D1 which is rated at 700W. USB-A Port 2 × 15W, 5V/3A * Requires a Hub D1 which is rated at 700W. Anderson Port 1 × 12V/50A; 24V/25A * Requires a Hub D1 which is rated at 700W. INPUT AC Input Standard: 2,300W (10A) Max: 3,450W (15A) Solar Input 1,200W*2, 12-60VDC, 20A*2 Car Input 12V or 24V via cigarette lighter port Maximum Input Apex 300: 3,840W Max. Apex 300 + 1~6 B300K: 6,240W Max. (AC + Solar) GENERAL App Control Yes, via WiFi & Bluetooth Scalability Up to 6 × B300K / B300S / B300 per unit Pass-through Charging Yes Weight 83.78 lbs / 38 kg Dimensions (L x W x D) 20.67 × 12.87 × 12.6 in / 525 × 327 × 320 mm Charging Temperature 32°F to 104°F / 0°C to 40°C Discharging Temperature -4℉ to 104℉ / -20℃ to 40℃ Storage Temperature -4℉ to 104℉ / -20℃ to 40℃ Certification FCC, UL, TELEC, CE, NTC, RCM, LOA ICASA Warranty 5 Years IN THE BOX Apex 300 Portable Power Station x 1 Bluetti B300K Expansion Battery x 1 AC Charging Cable (5.91ft / 180cm) x 1 Car Charging Cable (Cig lighter - XT60, 2.41ft / 73.5cm） x 1 Grounding Screw (M5*10) x 1 User Manual x 1

Read more less

1024Wh Portable Power Station DJI Power 1000 V2 Power Your World Genuine Ultra-High-Capacity Power Output DJI Power 1000 V2 offers a 1024Wh battery capacity and supports a continuous 2600W output until the battery runs out, [1] reliably running over 99% [9] of everyday devices. It also supports DJI drone battery [25]fast charging, [4] improving content creation efficiency. In home backup and emergency scenarios, it can connect up to five 2048Wh expansion batteries [10][11], boosting the capacity to an incredible 11,264 Wh and offering solid backup power for household electricity needs. Camping and Road Trips Content Creation DIY Home Backup Battery  * Measured under 25° C (77° F) laboratory conditions, using DJI Power 1000 V2 to charge products of certain brands. The data is for reference only. Actual user experience may vary. DJI Drone Super Fast Charging When used with compatible accessories, DJI Power 1000 V2 enables SDC Super Fast Charging [4] for select DJI drone batteries [25], enabling takeoff in as little as half an hour. With three drone batteries, you can fly and film continuously throughout the day. Air 3 Series Intelligent Flight Battery Approx. 30 mins Battery level from 10% to 95% Inspire 3 TB51 Intelligent Flight Battery Approx. 28 mins Battery level from 10% to 95% Matrice 4 Series Intelligent Flight Battery Approx. 32 mins Battery level from 10% to 95% The above charging time data was measured in a controlled test environment and is for reference only. Fast and Flexible Recharging DJI Power 1000 V2 can be recharged via grid power, solar power, and car power. Whether indoors or on the go, you can choose the best charging method, ensuring a reliable power supply and greater convenience. Grid Power It's fast and easy to plug in, recharge, and go. When connected to grid power, it takes only 37 minutes to go from zero to 80% [7] and 56 minutes to full. Even if you start charging it right before heading out, it gives you the confidence to set off whenever you need. Solar Power Economical and environmentally friendly, DJI Power 1000 V2 can be recharged via the DJI Power Solar Panel Adapter Module (MPPT) [12], or the DJI Power 1.8kW Solar/Car Super Fast Charger [4] with up to 1800W [13]solar input, taking only 40 minutes to charge 1024 Wh. [14] Car Power Easily supercharge any road trip with the DJI Power 1kW Super Fast Car Charger [11] or the 1.8kW Solar/Car Super Fast Charger. [11]These charges utilize the excess electricity from your car's alternator to quickly recharge the DJI Power 1000 V2, suitable for regular cars and RVs. [24] With expansion batteries, it takes just 78 minutes [15] to charge the power station from zero to full. Upgraded Safety Design [5] Safety is a top priority for DJI Power 1000 V2, with careful attention paid to each detail ranging from its body structure and cell chemistry to the system software. Rich Built-in PortsExpanded Applications Extensive Accessories DJI Power 1000 V2 features dual USB-A ports, four AC output ports, one SDC port, one SDC Lite port, and two 1/4" threaded ports, allowing connection to various DJI Power series accessories, different models of solar panels, power supply cables, and adapter cables. * The appearance of products sold in different countries and regions may vary. Refer to the actual item. 1. Under standard indoor conditions of 25° C (77° F), Power 1000 V2 can deliver a continuous output of 2600 W until fully discharged. Data was tested in a controlled laboratory environment. 2. The USB-C port supports a max output power of 140 W. The device being charged must support the PD 3.1 protocol and use a USB cable that meets EPR specifications. 3. Measured at a distance of 100 cm from the Power 1000 V2 while charging in Standard Recharge Mode. For reference only. 4. Requires certain accessories, which are sold separately. 5. Compared with DJI Power 1000. 6. Based on the correct usage of the product, DJI Power 1000 V2 will have an approximate lifespan of 10 years, calculated on the basis of completing one full recharge/discharge cycle nearly every day. This data is for reference only. Actual user experience may vary. 7. Data tested under laboratory conditions at 25° C (77° F) and should be used for reference only. To achieve the maximum grid recharging power of 1440 W, the battery level must be at least 60%, and the ambient temperature should be between 20° C and 35° C (68° F and 95° F). 8. DJI Power 1000 V2 units purchased from the DJI Store will have a three-year warranty, which can be extended by an additional two years after first connecting to the DJI Home app. Consult customer service on DJI Store for more details. 9. Device power does not exceed 2600 W. 10. DJI Power 1000 V2 can connect up to five expansion batteries, which provide up to 11,264 Wh when fully charged. 11. Sold separately. 12. Each Solar Panel Adapter Module (MPPT) can connect one to three solar panels. Power 1000 V2 supports up to two adapter modules simultaneously, allowing connection of up to six panels. It can also connect to one panel via the DJI Power Car Power Outlet to SDC Power Cable. 13. DJI Power 1.8kW Solar/Car Super Fast Charger's MC4 Solar Panel Cable supports up to 1200W solar input. In the meantime, its XT90 Car/Solar Charging Port can be expanded to an MC4 connector using the separately sold DJI Power 1.8kW Super Fast Charger XT90 to MC4 Adapter Cable, providing an additional 600W solar input. To achieve the maximum 1800W solar input for Power 1000 V2, it must be used with DJI Power Expansion Battery 2000, the 2048Wh Expansion Battery. 14. Measured under 25° C (77° F) laboratory conditions. For reference only. 15. Measured at an ambient temperature of 25° C (77° F) when the 1kW Super Fast Car Charger connects to a 12V or 24V car system and recharges DJI Power 1000 V2 at a maximum power of 1000 W via the vehicle's alternator. 16. One cycle is defined as a complete charge and discharge. Tested in a 25°C (77° F) laboratory environment, with DJI Power 1000 V2 recharged in Standard Mode and discharged at 1000W output power to external devices. 17. To ensure product performance, do not operate in rainy environments for more than 3 minutes, in condensation for more than 30 minutes, or in salt fog for more than 8 hours. Avoid prolonged exposure to condensation or salt fog. 18. Supports use at altitudes up to 5000 m. Supports use in environments as low as -10° C (14° F). Data was tested in a controlled laboratory environment. 19. The power station can continue to function normally after being held with both hands and dropped from a height of 50 cm onto dry mud. 20. Data was tested in a controlled laboratory environment. 21. At ambient temperatures between 0° C and 45° C (32° F and 113° F), the 1kW Super Fast Car Charger can recharge DJI Power 1000 V2 at a maximum power of 1000 W via the car's alternator. Data was tested in a controlled laboratory environment. 22. Both the DJI Power 1.8kW and 1kW Super Fast Chargers can stabilize battery voltage at 13.5 V. Depending on the voltage status, they can either recharge Power 1000 V2 (when the voltage is above 13.5 V) or supply power from Power 1000 V2 to the battery (when the voltage is below 13.5 V). Hybrid and fully electric vehicles are currently not compatible with DJI Power 1.8kW Solar/Car Super Fast Charger or DJI Power 1kW Super Fast Car Charger, due to differences in generator operation compared to traditional fuel-powered vehicles. 23. Measured at an ambient temperature of 25° C (77° F) when the 1.8kW Super Fast Charger connects to a 12V or 24V car system, providing up to 1200W solar power and 600W car power simultaneously to recharge Power 1000 V2 and the expansion battery. This data is for reference only. Data was tested in a controlled laboratory environment. 24. In different countries or regions, a compatible power adapter cable needs to be purchased separately. 25. For more details on fast-charge-supported DJI drones, refer to the FAQ page. Specs General Model DYM1000V2LDYM1000V2H Cell Chemistry LFP (lithium ferrophosphate) Capacity 1024 Wh Cycle Life Maintains over 80% capacity after 4000 cycles.One cycle is defined as a complete charge and discharge. Tested in a 25°C (77°F) laboratory environment, with DJI Power 1000 V2 recharged in Standard Mode and discharged at 1000W output power to external devices. Net Weight Approx. 14.2 kg Dimensions 448×225×230 mm (L×W×H) Number of Ports AC Output × 4 (For regions using CN, US, and JP standards)* AC Output × 2 (For other countries and regions)* USB-C × 2USB-A × 2SDC × 1SDC Lite × 1AC Input × 1* Models for regions using CN, US, and JP standards feature four AC output ports. Due to differing port sizes, models for other regions include only two. Max Operating Altitude 5000 m Output Specifications AC Output DYM1000V2L: AC 100-120 V, 50/60 Hz, max current: 20 ADYM1000V2H: AC 220-240 V, 50/60 Hz, max current: 10.9 AAC output data varies by country and region. AC Output (Bypass Mode) DYM1000V2L: AC 100-120 V, max current: 12 ADYM1000V2H: AC 220-240 V, max current: 10 A USB-A Output 5 V, 3 A9 V, 2 A12 V, 2 AMax output power per channel: 24 W USB-C Output 5 V, 5 A9 V, 5 A12 V, 5 A15 V, 5 A20 V, 5 A28 V, 5 A (EPR)Max output power per channel: 140 W** The USB-C port supports a max output power of 140 W. The device being charged must support the PD 3.1 protocol and use a USB cable that meets EPR specifications. SDC Output SDC: 9-28 V or 32-58.4 V, max current: 42 A (for DJI drone fast charging and more)SDC Lite: 9-27 V, max current: 10 ABoth SDC and SDC Lite ports support extensive accessory expansion. Input Specifications AC Input DYM1000V2L:AC 100-120 V, 50/60 Hz, max current: 13 AAC 100-120 V, 50/60 Hz, max current: 13 A (Bypass mode)DYM1000V2H:AC 220-240 V, 50/60 Hz, max current: 6.5 AAC 220-240 V, 50/60 Hz, max current: 10 A (Bypass mode) SDC Input SDC: DC 32-58.4 V, max current: 60 ASDC Lite: DC 32-58.4 V, max current: 8 ABoth SDC and SDC Lite ports support extensive accessory expansion. Operating Temperature Power Supply Temperature -10° to 45° C (14° to 113° F) Recharging Temperature 0° to 45° C (32° to 113° F) Storage Temperature -10° to 45° C (14° to 113° F) Wi-Fi and Bluetooth Transmitter Power (EIRP) Wi-Fi (802.11 b/g/n): 2.4000-2.4835 GHz: < 20 dBm (FCC/CE/SRRC/MIC)Bluetooth 5.0: 2.4000-2.4835 GHz: < 7 dBmThe supported operating frequency bands and their corresponding availability vary by country/region. For details, please refer to local laws and regulations. In the Box DJI Power 1000 V2 × 1 DJI Power AC Power Cable × 1

Read more less

The Meganobz are the richest and most battle-hardened Nobz around. Clad in Mek-built mega armour (with enough protective plating to turn the wearer into a walking tank), these Nobz can shrug off the hail of bullets that would kill lesser Orks. This multi-part plastic boxed set contains three Meganobz and a Grot Oiler. Each Meganob is armed with a power klaw and a twin-linked shoota (which can be upgraded to a kombi shoota-rokkit launcha or a kombi shoota-skorcha). In addition to the deadly dakka, this kit also has enough killsaws to give each of your Meganobz a pair. One Meganob can be assembled as a Big Mek in mega armour armed with a kustom mega-blasta and power klaw (which also functions as Mek’s tool for battlefield repairs). You have the option to equip your Big Mek with a back mounted kustom forcefield or a tellyport blasta.  

Read more less

Leave the Ice Behind: No more watery messes or lost space from ice. Keep drinks frozen and food chilled from -20°C to 20°C. Even and Fast FrostFlow Cooling: In just 15 minutes, drop from 25°C to 0°C, with food and beverages evenly cooled, no more warm surprises. Everlasting Chill: Keep things cool for 4.3 days of adventures with two 288Wh batteries, 52 hours with just one. 4 Ways to Recharge: Recharge in any situation. Use a 100W solar panel, car socket, wall outlet, or USB-C cord. 3 Ways to Chill: Cool down fast in Max Mode, extend battery life in Eco Mode, or optimize both in Smart Mode. Go Anywhere with EasyTow: Roll over any terrain thanks to 15cm wheels and a retractable handle for easy pulling. What's in the Box: Anker SOLIX EverFrost 2 Cooler, Removable Battery, AC Adapter and Charging Cable, Car Charging Cable, Accessory Container, Wheel Chock, Safety, and Quick Start Guide. ANKER SOLIX Everfrost 2 reviewed by Casey 250 Watch Video A Fresh Take on the Outdoors Go Anywhere with EasyTow™ Control Remotely via the App Top Up with Extra Power Bank SPECIFICATIONS: EverFrost 2 40L Storage Capacity: 40L Interior Dimensions: 37.19 (L) × 31.27 (W) × 34.68 (H) cm Operation Time: 104 Hr (2 Batteries)52 Hr (1 Battery) Temperature Range -20°C to 20°C Recharging Time (Single Battery) 100W Solar Panel: 3.6 HrWall Outlet: 3.6 HrCar Cigarette: 3.6 HrUSB-C: 5.5 Hr App Yes Built-In Light Bar Yes Product Dimensions 749 × 459 × 493 mm Product Net Weight 23 kg AC Adapter 95W Car Socket 95W Solar 100W USB-C 60W Output 1× 12W USB-A1× 60W USB-C   What's in the Box Anker SOLIX EverFrost 2 40L Electric Cooler Removable Battery AC Adapter and Charging Cable Car Charging Cable Accessory Container Wheel Chock Safety Guide Downloads User Manual Downloads Notes: 1. 4.3 days of cooling is determined with an internal cooler temperature of 4°C. The cooler was empty and in Eco mode with 2 fully charged batteries at an ambient temperature of 25°C.2. The 15-minute cooling time is based on testing in Max mode with an ambient temperature of 25°C. The cooling temperature was set to 0°C with no contents inside.3. The ±1.2°C even-cooling test was conducted under laboratory conditions. The ambient temperature was 25°C, and the internal cooler temperature was 0°C in Max mode. The cooler storage capacity was under 80%.4. Solar recharging is only possible when a battery is inside the cooler.

Read more less

400W of Solar Power: Watch solar power performance in action with SOLIX PS400—even quickly charging Anker portable power stations. Up to 23% Conversion Efficiency: You'll notice 1.5X faster charging times thanks to monocrystalline solar cells and a powerful sunlight-trapping surface. 4 Set Angles for Max Sunlight Absorption: No matter where you are, the season, or time of day, you can maximize sunlight absorption. Easily switch between 30°, 40°, 50°, or 80° angles IP67 Waterproof Protection: With an IP67 waterproof design, you can camp without fear and enjoy the adventure with SOLIX PS400 Solar Panel. What's In The Box: Anker SOLIX PS400 Solar Panel, 2x 9.8ft(3m) MC4 solar charging cable, 1.6 ft (0.5 m) MC4 to XT-60 solar charging cable and safety manual. Specs Rated Power 400W Open Circuit Voltage 57.6V Operating Voltage 48V Operating Current 8.33A Dimensions (Folded) 35.9 × 25.9 × 1.9 in / 913 × 659 × 47 mm Dimensions (Unfolded) 102 × 35.9 × 1.2 in / 2,591 × 913 × 30 mm Net Weight 35.1 lb / 15.9 kg

Read more less

4 Set Angles for Max Sunlight Absorption: No matter wheryou are, the season, or time of day, you can maximize sunlight absorption. Easily switch between 30°, 40°, 50, or 80° anglees. IP67 Waterproof: The solar panel's IP67 waterproof protection allows it to withstand even the harshest weather and your adventurous lifestyle. 1.5X Higher Energy Conversion Efficiency: Monocrystalline solar cells and a powerful sunlight-trapping surface provide a conversion efficiency rate up to 23%. Superior Portability: Designed to be brought on adventures, the foldable solar panel is compact, so you can have continuous power to charge your devices quickly on the go. What's in the Box: 200W Solar Panel, 2x 9.8 ft (3 m) MC4 solar charging cable, 1.6 ft (0.5 m) MC4 to XT-60 solar charging cable and safety manual. 200W Solar Input Power Harness the power of the sun with the 200W solar panel and charge your essential appliances, such as a mini fridge or lamp, when you're off the grid. Specs Rated Power 200W Open Circuit Voltage 57.6V Operating Voltage 48V Operating Current 4.17A Dimension (Folded) 22.44 × 23.70 × 2.36 in / 570 × 602 × 60 mm Dimension (Unfolded) 23.70 × 83.85 × 0.78 in / 602 × 2130 × 20 mm Net Weight 20.34 lb / 9.23 kg

Read more less

High Conversion Efficiency: The solar panel converts up to 23% of sunlight into solar energy, charging your solar generators even on cloudy days. 4 Set Angles for Max Sunlight Absorption: No matter wheryou are, the season, or time of day, you can maximize sunlight absorption. Easily switch between 30°, 40°, 50, or 80° anglees. Made for PowerHouse: Anker PS100 Solar Panel is compatible with PowerHouse 521, 535, and 757 (sold separately), making it an ideal all-in-one power solution for road trips, camping trips, RVs, and more. The lightweight solar panel features a USB-C and a USB-A output port to charge 2 devices at the same time. Highly Durable: The solar panel is scratch and weather-resistant to last as long as your adventures do. What You Get: Anker PS100 Solar Panel (100W), solar charging cable, XT-60 To DC7909 connector, welcome guide, our 18-month warranty, and friendly customer service.

Read more less

Long-Lasting Portable Power Station With a 10-Year Lifespan: With our proprietary long-lasting technology InfiniPower™, combined with LiFePO4 batteries, ultra-durable electronic components, a smart temperature control system that monitors temperature up to 100 times per second, and impact-resistant structural design, Anker Expansion Battery 760 is built to last over a decade, even with everyday use. Double the Power: Use 760 Expansion Battery (2048Wh) with Anker PowerHouse 767 (2048Wh) and scale up the battery capacity to 4096Wh. Extremely Durable and Safe: Drop-proof unibody design, electronic components with a 50,000-hour lifespan, and a ventilation grille for better heat dissipation show that 760Expansion Battery is designed for the long run. A secure 3-point protective clasp safeguards the battery and ensures no leakage current occurs while charging. 5-Year Full-Device Warranty: Instead of the average 2 years, Anker 760 Portable Power Station Expansion Battery is designed to reliably power your devices every day for 10 years. Additionally, it offers a superior 5-year full-device warranty for a guaranteed, worry-free experience. What You Get: Anker 760 Portable Power Station Expansion Battery (2048Wh), user manual, battery-to-host cable, 5-year warranty, and our friendly customer service. Specs Rated Capacity 51.2V 40,000mAh/2048Wh Battery Type LiFePO4 Batteries Dimensions 44.3 × 26.8 × 23.8cm / 17.44 × 10.6 × 9.4in Net Weight 20.7kg/45.6lb

Read more less

288Wh Capacity (24Ah@12V)｜300W Output To activate C300 DC Portable Power Station for the first time: Recharge with an 18W or higher USB-C wall charger, such as an Anker USB-C charger or laptop charger. Note that only the USB-C2 and USB-C3 ports can be used. This 90,000mAh (288Wh) battery delivers 300W and includes two 140W two-way USB-C fast charging ports. Power all your tech on the go with versatility, no matter the connection type. Attach the strap (sold separately) with a 30% smaller power station for complete portability. Give your journey endless charging with up to 100W solar recharging. We recommend 100W or 60W Anker Solar Panel. This power station is not compatible with Anker SOLIX PS30 (or other 5V~3A USB-C panels), PS200, PS400. Fast Recharge to 80% in an hour minutes with the dual PD 3.1 USB-C port. You can also use solar panels or your car. What is in the Box: Anker SOLIX C300 DC Portable Power Station, USB-C to C Charging Cable, Safety Manual, and Warranty Info Tent Camping Backyard Party Fishing Tailgate Party Emergencies SPECIFICATIONS Anker SOLIX C300 DC 288Wh | 300W  Capacity / Output Pop-Out, Extendable Light Number of Ports: 7 Dimensions: 124 x 120 x 200 mm Net Weight: 2.8kg Solar Input: XT60 - 100W Car Outlet - 120W Battery Type - LifePO4 Warranty -3 Years App Connection - Yes UPS - No What's in the Box Anker SOLIX C300 DC USB-C to C cable Important Safety Instructions Warranty Card User Manual Downloads

Read more less

1056Wh Capacity (88Ah@12V)｜1800W Output Achieve 80% battery capacity in just 43 minutes and a full charge in under an hour. Power up to 99% of appliances at once with 2400W access 9 Ports. Offering up to 600W Fast Solar Recharging, fully powering the device in just 1.8 hours. Monitor energy intelligently via the app. Connect with Bluetooth and Wi-Fi. Long-Lasting LFP batteries with 3,000 Cycles and 5-year hassle-free warranty. Providing unparalleled compatibility and capacity for RVs and Outdoor Camping.   Put Full Power Control in Your Hands With the Anker app, you're the one calling the shots on your power. Customize to your heart's content. Set AC Recharging Speed View Real-Time Status Save with Power Scheduling Tech Specs   C1000 Portable Power Station   Capacity: 1056Wh Battery Type: LiFePO4 (Lithium Iron Phosphate) Battery Life Cycles: 3,000 (80% Capacity) AC Continuous Output: 1800W Pure Sine Wave AC Surge Output: 2400W AC Outlets: 4× Solar Input Recharge: 600W Max, 11-60V MPPT AC Input Recharge: 1,300W Max Cigarette Lighter Output: 120W, 12V/10A UPS Switch Time: <20ms USB-A Output: 2× 12W USB-C Output: 1× 100W, 1× 30W Scalability: Up to Max. 2112Wh Capacity with Expansion Battery (Coming soon.) Discharging Temperature: -4°F - 104°F Charging Temperature: 32°F - 104°F Wireless Connection for App: Wi-Fi and Bluetooth Length × Width × Height: 14.8×8.07×10.5 in37.6×20.5×26.7 cm Net Weight: 28.44 lb / 12.9 kg Warranty: 5-Year Warranty What's in the Box Anker SOLIX C1000 Portable Power Station Solar Charging Cable AC Charging Cable Car Charging Cable User Manual Downloads

Read more less

3.84kWh-26.9kWh (320Ah@12V)｜6,000W Enlarged Capacity From 3.84kWh: Anker SOLIX F3800 has 3.84kWh to power your family's needs for one day. If that's not enough, add up to 6 battery packs to expand capacity to 26.9kWh. High-Wattage for Any Appliance: No more limitations when you're powering your dryer. The 6,000W AC output runs everything in your home. Charge Your EV: You don't need complicated grounding accessories, just your EV AC charging cable and Anker SOLIX F3800's EV port. Charge your EV at 2,300W. 5-Year Warranty, 10-Year Lifespan: Anker SOLIX F3800 is built to last over a decade, even with everyday use, thanks to Anker InfiniPower technology. The power station also features EV-class LFP batteries, durable components, a smart temperature system, and an impact-resistant design. Intelligent Remote Control: No more struggling for maximum savings thanks to settings on the Anker app. Connect with Wi-Fi or Bluetooth, monitor all your power sources, and decide exactly how it will be used to keep more money in your wallet. Anker SOLIX F3800 Minimum Effort, Maximum Power Always Stay Charged and PreparedInternational Models. Product availability and specifications may vary within the Australian market. Enormous CapacityFrom 3.84kWh Power your home for a day with 3.84kWh. Expand to 26.9kWh with 6 batteries. Plug-and-Play Power for Any Situation Charge Your EV Conveniently Avoid grounding accessories. Just plug in your EV charging cable through the EV port (3,000W). Take Massive Power Anywhere Roll easily thanks to industrial-grade wheels or carry with handles at the top and bottom. Relax with Easy RV Power Power your road trip and RV appliances with built-in RV ports. Home Backup Professional Power Power for EVs Power for RVs Power Up with Endless Solar Energy 2,400W Solar Input Reliable and Long-Lasting Enjoy long-lasting InfiniPower™ technology for 10 years, backed by a 5-year warranty. Customise Power for Max Savings Maximize your monthly power savings with customised settings in the Anker app. Tech Specs   Capacity: 3,840Wh Battery Type: Lithium iron phosphate (LiFePO4) Battery Lifecycle: 4,000 cycles AC Continuous Output: 6,000W, 120V&230V Dual Voltage AC Surge Output: 9000W AC Outlets x6 Solar Input Recharge Max. 2,400W (2× 1,200W), 25A each AC Input Recharge: Max. 2300W Cigarette Lighter Output: 1× 120W, 12V/10A USB-A Output: 2× 12W, 24W in total USB-C Output: 3× 100W Scalability: Up to Max. 26,880Wh Capacity with Expansion Battery (Sold Separately) Max Expansion Batteries: Supports up to 6 EB UPS Switch Time: < 20ms Discharging Temperature: '-20°C- 40°C Charging Temperature: 0°C- 40°C Wireless Connection for App: Bluetooth & WiFi Length × Width × Height: 39.5 × 38.8 × 70.2 cm Net Weight: 60 kg Warranty: 5-years   What's in the Box Anker SOLIX F3800 AC Charging Cable Anker SOLIX MC4-to-XT60 Charging Cable User Manual Downloads

Read more less

A plastic miniature for Warhammer Age of Sigmar Add a brooding warrior to your Slaves to Darkness army Celebrate Warhammer Day 2025 in style with a billowing cape and planted sword Only available while stocks last Exalted Heroes like Urkhan the Dark Warden are those warriors who have caught the notice of the gods and now seek to make a true name for themselves. Their favoured prey are monsters and enemy champions. By slaying these foes, an Exalted Hero proves their might.Celebrate Warhammer Day 2025 with Urkhan the Dark Warden, a brooding Chaos Warrior to lead your Slaves to Darkness armies in games of Warhammer Age of Sigmar. As an Exalted Hero of Chaos he excels in cutting down even the largest monsters or enemy leaders. Standing smugly with his cape billowing in the wind and his heavy sword planted firmly, he makes for a fantastic painting project. Urkan comes with a choice of two heads – one helmeted with long curving horns, and one bare with a tall top knot and a chaos star etched into his flesh.This kit comprises 12 plastic components and 1x Citadel 40mm Round Base. This miniature requires assembly and is supplied unpainted – we recommend using Citadel Plastic Glue and Citadel Colour paints.

Read more less

Lunch Just Got Cooler Protect your lunch with the Pelican 8QT Personal Cooler. The 8QT Personal Cooler features separate compartments for wet and dry storage including: a dry box to store personal items a removable inner tray to keep non-perishables cool and a main compartment for larger items. An integrated ice pack is removable and reusable. This lunchbox will keep your daily essentials protected and cold all day. With premium features and legendary Pelican DNA this is the last lunchbox you'll ever need. All-Day Cold Retention Capacity for 6-8 Cans Integrated Removable Ice Pack Removable Inner Tray Dry Storage Compartment in the Lid Secure Press & Pull Latch Collapsible Carrying Handle Tie Down Openings on the Side 3 year warranty Specifications DIMENSIONS Interior (L×W×D)27.4 x 16.3 x 19.1 cm Exterior (L×W×D)34 x 24 x 26.7 cm MEASUREMENTS Volume7.57 litres Int Volume0.008 m³ WEIGHTS Weight2.3 kg

Read more less

Protect your HERO when you’re on the go Help keep your HERO damage-free with this protective sleeve, which features a lightweight, shock-absorbing design that protects the camera from dings and scratches without adding bulk. Easy to install, with access to the camera’s buttons, touch screen, LED, mounting fingers and USB port. Product Details Includes 1 Protective Sleeve for HERO Shock-absorbing design increases drop protection Slim and lightweight, preserving the camera’s profile Gives easy access to buttons, touch screen, LED, mounting fingers and USB port Simple and quick to install and remove without any tools Only compatible with the HERO camera

Read more less

TRUE 8K 360 VIDEO MAX2 delivers True 8K, resulting in up to 21% more resolution than the competition. This means sharper detail and unmatched image quality you only get from GoPro. MAX2 NEVER MISSES 360 video captures everything around you-just record and pick the best angles later in the app. You never have to aim, but always get the shot. GET THE SHOT. NOT THE POLE. Capture those incredible invisible selfies, third-person drone-like footage and more iconic 360 shots. THE ONLY 360 CAM BUILT FOR THIS MAX2 is the toughest, most versatile 360 camera because it's a GoPro. It thrives in high speeds, water, dirt, snow, and is built to perform in any environment. TWIST-AND-GO REPLACEABLE LENSES MAX2 replaceable lenses are made from super-strong optical glass, making them tough and difficult to break. And if they ever do get damaged, you won't have to replace the entire camera-just swap lenses and get back to the action. SUPER SLO-MO IN 360 Slow the action way down with amazing 4K100 spherical video (that's 3X slo-mo). Or go with a higher-resolution 5.6K60-up to 2X slow motion. 10-BIT COLOR IN 8K + 300MBPS + GP-LOG Capture over 1 billion colors in 8K, delivering a more realistic image with true-to-the-eye colors, and up to 300Mbps bitrate with GoPro Labs-the highest on any consumer 360 camera. And pro-users can use GP-Log Encoding with LUT. EPIC 29MP 360° PHOTOS Get ultra high-res 360° photos and legendary GoPro point-of-view shots. You'll have the flexibility to crop, zoom and Reframe for the exact look you want in the Quik app. TURN 360 FOOTAGE INTO RAD VIDEOS FROM THE CLOUD Editing 360 footage is called Reframing, and the creative possibilities are endless. It's super easy to pick the shots you want. Then track objects, add dynamic movements and transitions, even use multiple Reframe modes in the same clip-all with just a few taps. FREESTYLE YOUR EDITS With MotionFrame, simply move your phone within 360 footage to find the best angles. KEYFRAMES Easily select your field of view at specific moments in time, and transitions are automatically generated between them. CAMERAFX Make your videos more exhilarating than ever with CameraFX. These let you easily add pro-level motion with effects like Spin, Flip, Roll, Wobble, Tiny Planet and more. EASY POV + SELFIE MODES The easiest way to get GoPro's world-famous, immersive POV and selfies. The camera automatically shows you a front-facing 180° view, or the reverse angle for an awesome third-person selfie.* 180° IN 4K60 Get super wide, immersive POV shots from the front or back lens with the Max HyperView digital lens. It delivers a 180° field of view in stunning 4K60. 4 other digital lenses are available with 4K60, too-Linear, Wide, Ultra Wide and Max SuperView. SAY GOODBYE TO SHAKY VIDEOS Max HyperSmooth is our most powerful video stabilization, delivering maximum smoothness in the roughest conditions. And 360 Horizon Lock keeps all your shots level, whether you're spinning, flipping or chasing your kids. IMMERSIVE AUDIO + PRECISE CONTROL When shooting 360, the 6-microphone array captures clean stereo audio from all around you + reduces wind noise for the best sound quality ever in a GoPro. In Single Lens Mode, you can automatically match stereo audio width to your video field of view, or manually select Front, Back, or Match Lens options for precise control over where your audio is captured. 29 MILLION PIXELS Two powerful image sensors combine with premium stitch quality to deliver 29 million pixels-and true 8K resolution of your 360 video. Specifications Design + Dimensions Video Modes 360: Video, POV, Selfie, LoopingSingle-Lens: Video Dimensions (W x H x D) (mm) (W) 64.0mm x (H) 69.7mm x (D) 48.7mm Weight (Camera w/mounting fingers + Battery) 195g Replaceable Lenses Yes (Change in Field) Battery 1960mAh Enduro Battery Rugged + Waterproof 5m (16-ft.) Mounting Built-In Mounting with Folding Fingers¼-20 MountMagnetic Latch Mount (compatible) Memory Storage microSD 1x microSD™ rated class A2 V30 or higher Connector USB-C (3.0) Operating Temperature -10º C - 35º C Image Quality / Hardware Spec Image Sensor 1/2.3" Lens Aperture F1.8 35mm Equivalent Focal Length Min = 14mmMax = 26mm Video Video Modes 360: Video, POV, Selfie, LoopingSingle-Lens: Video Video Resolutions & Frame Rates 360:8K: (7680x3840) @ 30/25/24 fps5.6K: (5376x2688) @ 60/50/30/25 fps4K: (3328x1664) @ 100/90/60/50 fpsSingle-Lens:4K: (16:9) (3840x2160) @ 60/50/30/25/24 fps4K: (9:16) (2160x3840) @ 60/50/30/25/24 fps4K: (4:3) (4000x3000) @ 60/50/30/25/24 fps1080p: (16:9) (1920x1080) @ 60/50 fps1080p: (9:16) (1080x1920) @ 60/50 fps POV & Selfie Modes 360:8K: @ 30/25/24 fps5.6K: @ 60/50/30/25 fps4K: @ 100/90/60/50 fps Slo-Mo 3x - 4K100 Video Stabilization Max HyperSmooth with 360° Horizon Lock Aspect Ratio 16:9 9:16 4:3 Digital Lenses Max HyperView (16:9 only)Max SuperView (16:9 only)Ultra WideWideLinear Color Video Bit Depth 8-bit10-bit Log Encoding GP-Log with LUT Maximum Video Bit Rate 120Mbps Video Compression Standard H.265 (HEVC) Video Format 360: .360Single-Lens: .MP4 Lens Priority Exposure and Control Yes Photo Photo Modes 360: Photo, Burst Photo, Night PhotoSingle-Lens: Photo Photo Resolution 360: 29MP (7680x3840)Single-Lens: 12MP (4000x3000) Photo Frame-Grabs from Video Up to 12MP from 4K (4:3) Video Photo Output Standard, RAW (Single Lens) Photo Formats .36P.JPG.GPR Photo Aspect Ratio 4:3 Digital Lenses (single photo) Ultra WideWideLinear Burst Photo Rates (Frames / Second) 360: 29MP Photos @ 5/1, 10/1, 10/3; 30/3, 30/6 Night Photo Shutter Speed Auto, 2, 5, 10, 15, 20, 30 sec. Lens Priority Exposure and Control Yes Time Lapse Time Lapse Modes 360: TimeWarp, Time Lapse, Night Lapse, Star Trails, Light Painting, Vehicle LightsSingle-Lens: TimeWarp TimeWarp Video 360: 8K30; 5.6K30Single-Lens: 4K30, 1080p30 Time Lapse Video 360: 8K30; 5.6K30 Night Lapse Video 360: 8K30; 5.6K30 Star Trails, Light Painting, Vehicle Lights 360: 8K30; 5.6K30 Advanced Image Settings Shutter Speeds Video: 1/7680 - to the limit of frames per secondPhoto: Auto, 1/125 - 1/2000 EV Comp 2+/- White Balance 2300K - 6500K ISO Range Video: 100-6400Photo: 100-3200Night: 100-800 Color Profiles Natural, Vibrant, Flat Audio Features Audio Modes 360 AudioStereo Wind Noise Reduction Yes Directional Audio Yes - based on digital lens selection Microphones 6-microphones RAW Audio Capture WAV Format (Single Lens mode) Wireless Audio Yes Connected Features Wi-Fi Frequency Wi-Fi 6; 2.4GHZ; 5GHz Wi-Fi Protocol 802.11 a/b/g/n/ac Bluetooth BLE 5.3 GPS Yes USB Port USB-C (3.0) Auto Upload to Cloud w/GoPro Subscription Camera Features QuickCapture Yes Voice Control 13 Commands11 Languages with 6 accents Scheduled Capture w/Duration Yes Timecode Synchronization Yes Everything In The Box GoPro MAX2 Camera 360 video captures everything around you 2 Protective Lens Caps Protects the lenses when your camera is not in use Curved Adhesive Mount Attach your GoPro to curved surfaces Enduro Battery High-capacity battery for MAX Microfiber Lens Cleaning Cloth High-quality microfiber pouch for storing + cleaning Thumbscrew Secures camera to Mounting Buckle Short Mounting Buckle Connect your GoPro to mounts USB-C Cable Camera charging cord Stickers (4x) Rep the radness

Read more less

Note: The terms "DELTA" and "RIVER" as mentioned on this page refer to products exclusively manufactured by ECOFLOW INC. RIVER/RIVER 2/RIVER 3 series only support XT60 port. Delta series both supports XT60 and XT150 ports.   Note: When installing the Alternator Charger main unit, make sure not to block the power button. After connecting the Alternator Charger to the portable power station（both River and Delta Series） via the XT60 port, you need to press the power button each time you turn on the car to turn it on before initiating charging through the app. Top up 1kWh (85Ah@12V) in only 2.1 hours Charge 5× faster while you drive with our EcoFlow 500W Alternator Charger and recharge your power station in only 2.1 hours.With the EcoFlow 500W Alternator Charger, charge 5 times faster than with traditional vehicle auxiliary power outlets simply by using excess energy generated by your vehicle. The charger uses its onboard DC-DC converter to restore your EcoFlow power station's energy while you drive. Triple the value with a 3-in-1 functional design The 3-in-1 charger, maintainer, and jump starter saves time, money, and precious in-vehicle space.With its smart and efficient fast charging capabilities, you'll stay powered no matter how long you're on the road. The 500W Alternator Charger comes with an XT60 cable, but does not support reverse charging & battery maintenance functions with the XT60 cable. To enable reverse charging & battery maintenance functions, purchase the XT150 cable and use with an EcoFlow DELTA Series product. Charging Mode Use your car's alternator to refuel your portable power station. Reverse Charging Mode Recharge your vehicle starter battery or RV house battery using your portable power station. Battery Maintenance Mode Extends your vehicle starter battery or RV house battery life by using a lower electrical current. Compatible with all EcoFlow and most third-party power stations Compatible with an XT60 connection, designed to charge EcoFlow RIVER, DELTA Series, and most third-party power stations. The charger's 500W fast-charging is compatible with most SUV, Pickup, and RV alternators, meeting diverse short-trip car camping power needs. *When using an XT60 cable, the Alternator Charger switch on the device must be manually turned on and the charging function enabled in the app before charging can begin. Therefore, if planning to use the XT60 cable for output, avoid concealed installation of the Alternator Charger in advance. Traditional vs. EcoFlow Portable Dual Battery Systems More Detailed Specifications for 500W & 800W Alternator Charger Extend your 4WD battery runtime Conveniently adapts to 12V/24V 4WD batteries. Connects to EcoFlow portable power stations and protects 4WD batteries while expanding energy storage capacity by up to 7.2kWh*.* With EcoFlow DELTA 3 Pro and DELTA 3 Pro Extra Battery. Clean, easy install without leaving a mark Connect your 500W Alternator Charger to your vehicle's starter battery or RV's house battery to enjoy a worry-free power experience during your journey. Connect the Fuse Cable Connect the fuse cable to the input cable on one end. Connect the fuse cable to the vehicle battery on the other end. Connect the Input Cable 1. Connect the black cable to the chassis terminal.2. Thread the other end of the input cable through the car body towards the charger. If the input cable is bulky or difficult to pull through, disconnect the cable ends before threading.3. Plug the other side of the input cable into the EcoFlow 500W Alternator Charger. Start Charging Plug in the output cable from the EcoFlow 500W Alternator Charger to the portable power station. Safety-assured for any journey With a high thermal resistance, Gallium Nitride (GaN) technology ensures safe charging every single time. The 500W Alternator Charger offers multiple safety features, including undervoltage protection that prevents excessive energy use and damage to the starting battery. A 2-year warranty ensures your experience and peace of mind. Specs Model EF-MS-H02-1 Net Weight 5.7 kg Dimensions (W × D × H) 242×194×35 mm Wi-Fi Frequency: 2412MHz-2472MHz Maximum output power: 18.22dBm Bluetooth Frequency: 2402MHz-2480MHz Maximum output power: 7.89dBm Charging Mode Input: 12V/24V⎓(11V-31V⎓), 45A Max. Output: 40V-60V⎓, 500W Max.;24V⎓, 360W Max. Battery Maintenance Mode Input: 40V-60V⎓, 3A Max. Output: 13.8V/27.6V⎓, 100W Max. Reverse Charging Mode Input: 40V-60V⎓, 13.2A Max.Output: 13.8V/27.6V⎓, 500W Max. Fuse's Rated Current: 125A Protection Type: Reverse polarity protection / Overcurrent protection / Short circuit protection / Overvoltage and undervoltage protection (Provided with integral protection against overloads)   What's in the box

Read more less

The EcoFlow 125W bifacial modular solar panel offers 25% efficiency, plug-and-play expansion, and reliable performance in various weather conditions, making it ideal for long-term home and outdoor use. Perfectly Tailored for Home Use Long-Lasting Solar Solution for Your Home With a 30-year lifespan, this durable, low-maintenance solar panel is ideal for home use. Home Backyard Fully charge EcoFlow DELTA Pro 3(4kWh) in as fast as 3-4 hours with 3 sets of 500W (125W × 4) panels[1]. RV Fully charge EcoFlow DELTA 3(1kWh) in as fast as 2-3 hours with 1 set of 500W (125W × 4) panels[1]. Modular Design Seamless Expansion and Broad Compatibility The EcoFlow 125W Bifacial Solar Panel features an innovative modular design, delivering 125W power, 50V, and 3A current output, designed for seamless expansion within its safe range, it offers exceptional adaptability with various EcoFlow portable power stations. Revolutionary N-Type TOPCon Solar Cells & Dual-Sided Design Maximize Energy Generation With N-Type TOPCon technology, achieve up to 25% conversion efficiency. The dual-sided design generates Max. 138W[2] bifacial output, capturing more solar energy. Coated with Protective Lamination & Tempered Glass Durable, All-Weather Design Built with robust anti-corrosive aluminum frame, TOPCon cells feature 1.1mm ultra-thin tempered glass for excellent light transmission, POE films for UV and moisture resistance, PET backsheets for durability. The panel is IP68-rated with waterproof XT60-W connector, ensuring robust, weather-resistant performance. Flexible, Lightweight Design for Adjustable Power Needs The 500W setup weighs only 37 lbs (16.8 kg) . The modular design enables flexible power configuration. For situations requiring less than 500W or a lighter setup, the system can be split into individual panels, offering both flexibility and reduced weight. Featuring 3M™ Dual Lock™ Reclosable Fasteners[3], ensures quick and steady assembly, and the protective bag makes transport and storage effortless. Universally Compatible Solar Cable Plug and Play with Your Power System Easily connect to third-party solar systems using the included photovoltaic connector (MC4 compatible）[4]. Safely charge your power systems and portable power stations with XT60 connectors, featuring waterproof, touch-safe, anti-leak technology for reliable performance. EcoFlow 125W Bifacial Modular Solar Panel Charging Times Specs Rated Power: STC 125W (±3W) BNPI 138W (±3W) Open Circuit Voltage: 50V Short Circuit Current: STC 3.2A BNPI 3.4A Optimal Operating Voltage: 43V Optimal Operating Current: STC 3ABNPI 3.2A Recommended Ambient Temperature: -40°C to 85°C Efficiency: 25% Bifaciality Coefficients: 80%±5% Weight: Approx. 4.2 kg Dimensions (L×W×H): 612×1154×22 mm Maximum System Voltage: 600V DC (IEC/UL) Cell Type: TOPCon monocrystalline silicon Connector Type: XT60 Waterproof & Dustproof Rating: Solar Panel IP68 XT-60 Connector IP68 Warranty (AU): 5 Years Lifespan: 30 years, 90% What's In The Box EcoFlow 125W Bifacial Modular Solar Panel ×4Protective Bag ×2EcoFlow Solar Extension Cable (2M) ×2EcoFlow Solar Connector to XT60i Extension Cable (MC4 Compatible) ×1EcoFlow XT60i to Solar Connector Extension Cable (MC4 Compatible) ×1Quick Start Guide, Safety Instructions & Warranty Card Footnotes: [1] Tested under optimal conditions.[2] The maximum combined power output of the 125W bifacial panel is 138W. Under the same lighting conditions, the bifacial panel can generate up to 10% more power on the rear side compared to a single-sided panel, calculated as (138-125)/125 * 100% = 10.4%.[3]The term "3M" and "dual lock" are both trademarks belonging to the 3M Company, also known as the Minnesota Mining and Manufacturing Company.[4] Included with the 500W (125W × 4) bifacial modular solar panel set.  

Read more less

Why EcoFlow GLACIER Classic Stands Out Keep Fresh Here, Frozen There Dual-zone flexibility* The dual-zone design (45L & 55L only) lets you store fresh and frozen food simultaneously with a maximum temperature difference of 22°C. Advanced sensors maintain precise conditions (±1°C) to keep food perfectly fresh.* The 35L model features single-zone cooling, switchable between fridge and freezer modes. Sized Down, Packed Up Holds up to 90 cans in a compact design 40%* more compact design, giving you more space in your car—a true home on the move. The EcoFlow GLACIER Classic maximizes storage efficiency, fitting 58 cans (35L), 72 cans (45L), and 90 cans (55L) of 330ml soda while staying sleek and space-saving. * Based on laboratory testing data, the external dimension is 40% smaller than that of standard electric coolers. Built for Every Scenario Up to 43 Hours of Fresh 298Wh plug-in battery (Sold separately) The EcoFlow GLACIER Classic keeps your items chilled at 4°C for up to 43 hours (35L) or 39 hours (45L and 55L)** * The EcoFlow GLACIER Plug-in Battery is sold separately. ** Tested at 25°C ambient temperature with a fully charged battery. No melted ice, no soggy food Max Performance, Minimal Effort Energy-saving cooling system Perfectly Designed for Every Journey Versatile features for any adventure Road-Ready Available in 35L, 45L, and 55L capacities, the EcoFlow GLACIER Classic 35L is comparable to a standard 24-inch suitcase. It's an ideal fit for SUVs, Class B RVs, off-road vehicles, and more, saving valuable space while providing ample storage for your adventures. The Slide Rail is an optional accessory. Dual-Sided Door Access Access your items from either side,no matter how the cooler is positioned in your vehicle. The dual-sided door design ensures flexible, hassle-free access, making it suitable for any setup. Adventure-Ready Accessories Hidden Dual-Side Wide Handles Equipped with hidden wide handles on both sides, it is designed for stable, comfortable two-person carrying. It's All on the App Remotely monitor, control, and personalize your GLACIER via the EcoFlow app. From real-time battery status to water leak prevention alerts, mode changes, and scheduled shutdowns—everything is just a tap away on your phone. Intelligent Modes for Maximum Convenience Max Mode Delivers maximum cooling for items like ice cream or frozen meats that need strict temperature control. Eco Mode Reduces power consumption to extend battery life during long outdoor trips. Temperature Alert Get notified if the internal temperature deviates by over 5°C for 10+ minutes, keeping items like meat and dairy safe. Temperature History Review a 7-day temperature history curve to spot anomalies and ensure consistent food freshness. Coolness That Never Stops Multiple charging options * For optimal performance, use the plug-in battery to avoid unstable power due to inconsistent sunlight. The EcoFlow GLACIER Plug-in Battery is sold separately.* Compatible with EcoFlow 500W and 800W Alternator Chargers. Doubles as a power bank Use the 100W USB-C port to power your phones and laptops, ensuring you stay connected to what matters most. Explore the GLACIER Classic Series Specs - GLACIER Classic 35L Dimensions external: 706×400×405 mm / 27.8×15.8×15.9 in Dimensions internal: 487×284×298.5 mm / 19×11×11.7 in Net Weight: 20.5 kg Usable Volume: 35L Number of 330ml Cans: 58 cans Temperature Zone: Variable Dual Temperature AC Input: AC Adapter: 95W max,14.5V; 100-240V 50/60Hz DC Input: Solar Charging: 11-30V, 8A/110W max, Car Charging: 12V/24V, 8A/100W max Battery Runtime: 43 hr(Tested @ Ambient temperature: 25°C/77°F, Eco mode) - (Battery Sold Separately) Rated Power: 55W Noise: < 38.5 dB Protection Level: IPX4 Cooling Capacity / Temperature Range In the Fridge: (-20°C) ~ (20°C) Operating Temperature Range (machine ambient temperature): (-10°C) ~ (50°C) Storage Temperature: (-20°C) ~ (60°C) Temperature Accuracy: Eco mode: ±2~3°C; Max mode: ±1°C Power Consumption (refrigerator): Refrigeration(4°C): 165wh/24h; 0.57 Ah/hFreezing (-18°C): 520wh/24h; 1.8 Ah/h(Tested @ Ambient temperature: 25°C, Eco mode) App: Suppported Warranty: 2 Years Refrigerant: R600a   What's in the box?

Read more less