The Myphitic Blight-hauler is an unpleasant combination of machine and putrid rotting meat. From the front, it resembles some grotesque armoured vehicle, with a curved carapace featuring the symbol of Nurgle and 2 large, covered tracks. Where this differs from an ordinary attack vehicle, however, is the toothed maw at the bottom. From the rear, the horror continues – a third track is visible, along with a mass of flabby flesh, bound into the machine with straps and metal. The Myphitic Blight-hauler is armed with a multi-melta and missile launcher, which are mounted either side of the carapace.This plastic kit comes as 13 components, and is supplied with a Citadel 80mm Round base. Rules for this miniature are included in the box. Important Note: All figures are supplied unassembled and unpainted. Cement and paints are sold separately. We recommend using Citadel Plastic Glue and Citadel Colour paints.

Read more less

Quick and simple assembly and removal.Dual sealed rings for better water/moisture resistance.Resistant to ultraviolet radiation and high/low temperatures.

Read more less

It provides 18-minute flight time [1] to allow the drone to perform at least 20 palm takeoff and landing for excursions in succession. [2] Its lightweight design does not compromise battery life. Carry a few extra batteries to ensure you never miss a moment.     Measured in a controlled environment. Specific test conditions are as follows: flying forward at a constant speed of 2 m/s in a windless laboratory environment at 20 meters above sea level, in photo mode (without photo-taking operation during flight), and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version. 2. Measured after DJI Neo is activated, with a fully charged battery and default settings, and using Circle, Rocket, and Dronie modes, and is for reference only. PRODUCT SPECIFICATIONS Capacity: 1435 mAhWeight: Approx. 45 gNominal Voltage: 7.3 VMax Charging Voltage: 8.6 VBattery Type: Li-ionEnergy: 10.5 WhCharging Temperature: 5° to 40° C  

Read more less

Boundless Power On-the-Road Industry's First Alternator-Charged Portable Power The EcoFlow Alternator Charger features up to 800W of charging power on the move, capable of charging 1kWh in 75 minutes. It connects to your vehicle's alternator, which generates robust power during operation. Beyond meeting the car's daily electrical needs, the alternator produces excess power. The EcoFlow Alternator Charger harnesses this extra power through its onboard DC-DC boost converter, efficiently charging the EcoFlow Portable Power Stations. Features Charge 1kWh in only 1.3 hours while you driveA 3-in-1 fast charger, maintainer, and jump starterExpands existing RV hous e battery capacitySafety-assured for any journeyClean, easy install without leaving a markSuitable for versatile vehicles (SUVs, pickups, RVs) Compatible with EcoFlow Portable Power Stations What's In The Box Specifications: Net Weight 2.3 kg Dimensions (W × D × H) 242×194×35 mm Wi-Fi Frequency: 2412MHz-2472MHzMaximum output power: <20dBm Bluetooth Frequency: 2402MHz-2480MHzMaximum output power: <10dBm Charge Mode Input: 11V-35V, 76A Max.Output: 40V-60V, 800W Max. Battery Maintenance Mode Input: 40V-60V, 3A Max.Output: 13.8V/27.6V, 100W Max. Reverse Charge Mode Input: 40V-60V, 21A Max.Output: 13.8V/27.6V, 800W Max. Rated Current of Fuse 125A Protection Type Reverse polarity protectionOvercurrent protectionShort circuit protectionOvervoltage and undervoltage protection Operating Temperature –20℃ to 60℃ Storage Temperature –30℃ to 70℃ Operating Humidity ≤95% Storage Humidity ≤95%

Read more less

Provides approx. 23-min flight time.* Get ready for immersive flying with a few more batteries to create your FPV footage more freely and confidently. Compatibility DJI Avata 2  * ‌Measured when flying forward at a speed of 21.6 kph in a windless environment at sea level, with camera parameters set to 1080p/30fps, video mode off, and from 100% battery level until 0%. Data is for reference only. Always pay attention to reminders on the goggles' screen during your flight. PRODUCT SPECIFICATIONS Capacity: 2150 mAhWeight: Approx. 145 gStandard Voltage: 14.76 VMax Charging Voltage: 17 VBattery Type: Li-ionEnergy: 31.7 Wh@0.5CCharging Temperature: 5° to 40° C (41° to 104° F)Charging Time: With Charging Hub (60W max charging power):From 0 to 100%: approx. 45 min‌From 10 to 90%: approx. 30 min‌‌Directly Charging the Drone (30 W max charging power):‌From 0 to 100%: approx. 88 min‌From 10 to 90%: approx. 60 min‌‌‌‌  

Read more less

NOTE: ALL REPLACEMENTS WILL TAKE 3 - 4 WEEKS FROM THE TIME YOUR CLAIM IS RECEIVED. CARE REFRESH IS A NON-REFUNDABLE AND NON-RETURNABLE ITEM, ONCE CODES HAVE BEEN SUPPLIED THEY CAN NOT BE RETURNED.   FEATURES Provides two replacement units for an additional charge as per the table below. The Care Refresh 1-year Plan lasts for one year from the date it is bound to your product, and covers for accidents such as water damage or collisions, letting you fly with peace of mind. DJI Care Refresh 1-Year Plan ReplacementService Number of Replacements 2 Number of Flyaway Replacements 1 Replacement Fee $219.00 Flyaway Replacement Fee $439.00 Extended Warranty Period Official warranty is provided during the validity period Support Renewal? Renew 1-Year Plan once Please Note: DJI Care Refresh can be bound to your DJI product when it meets one of the following criteria: Brand new and un-activated product. Aircraft or gimbal activated within the last 48 hours. Handheld device activated within the last 30 days. *If your craft has been activated for over 48 hours, follow the instructional guide linked below to verify your craft is in good working order and still eligible for DJI Care Refresh. Video Verification Guide Each time you request a replacement, you’ll receive a replacement unit that is new or equivalent to new in performance and reliability. If you have a DJI Care Refresh activation code, click here to bind it to your aircraft. WATER DAMAGE COVERAGE We'll replace your aircraft if an accident occurs, even if it's damaged by water.  TWO REPLACEMENTS, TOTAL PEACE OF MIND For an additional charge, DJI Care Refresh offers up to two replacement units within one year and covers accidents such as water damage, crashes and collisions. These replacement units will be new or equivalent to new in performance and reliability. DJI CARE REFRESH REPAIR PROCESS Ferntech will handle the entire DJI Care Refresh replacement process, which is as follows: Request a Care Refresh replacement via our online Service Request Form Delivery of damaged item* – please contact our helpful team at info@ferntech.co.nz and they will provide details on how to get your product to us. Product assessment by Ferntech team – upon completion, we will select the cheapest option to either have your product repaired or replaced under your DJI Care Refresh policy. Please advise if you would like to have your product replaced even if a repair is cheaper. *We require your product to complete the DJI Care Refresh process. Please Note: DJI Care Refresh covers return shipping fees back to your address. DJI Care Refresh and the corresponding product must be purchased from New Zealand. DJI Care Refresh only supports aircraft purchased from official or authorised channels. Please find detailed terms and conditions under the warranty tab above. If you want to purchase DJI Care Refresh for an aircraft that has been activated for over 48 hours, follow this Video Verification Guide. DJI FLYAWAY COVERAGE (DRONE NOT RECOVERED) Care Refresh offers 1x Flyaway Cover if your DJI Avata 2 is not recovered. To have Flyaway Cover active you need to bind your craft and remote controller to your DJI account by following this video. For any Flyaway case, you will need to lodge a Flyaway report through the DJI Fly application and then contact us.

Read more less

The NL1836 is a rechargeable 18650 battery featuring a 3600mAh capacity & internal protections. Use over 500 charge cycles!Safety FeaturesMicroporous barrier protects delicate internal components, coated with durable metallic film to guard against abrasionPurpose-designedHigh-performance protected circuitMercury free, lead free and cadmium free, low cost and environmentally friendlyCan be recharged over 500 times.Specifications• Capacity: 3,600mAh• Voltage: 3.6V (12.96Wh)• Continuous Discharge Current: 3A• Length: 69.8mm±0.3mm / 2.75"±0.01"• Diameter: 18.6mm±0.3mm / 0.73"±0.01"

Read more less

3300 Lumen Long Throwing Flashlight The Nitecore MH25 Pro rechargeable flashlight offers an impressive blend of brightness and throw, making it an ideal everyday carry duty light. Equipped with the innovative NiteLab UHi 40 LED, the MH25 Pro delivers a staggering 3300 lumen output and an impressive throw of 771 yards, equivalent to the length of more than six football fields combined. Measuring only 6 inches in length, MH25 pro is still compact enough to be carried every day as a professional duty light. Daily and Tactical Modes This flashlight offers remarkable versatility with its two modes, Daily mode and Tactical Mode. In Daily mode, users have access to five brightness levels as well as Strobe, Beacon, and SOS, while Tactical mode provides access to all brightness levels and Strobe, all conveniently indicated by the level indicators adjacent to the mode button. Moreover, the MH25 Pro incorporates an intelligent feature that automatically reduces brightness when it detects nearby obstructions, preventing overheating and blinding reflections. USB-C Rechargeable and Strong Powered by a high-capacity 5300mAh battery, the MH25 Pro can be charged via its built-in USB-C port, with power indicators providing battery level information. Once fully charged, it can run for over 650 hours on its lowest mode. Constructed from aero-grade aluminum alloy with an HA III hard-anodized finish, boasting an IP68 waterproof rating, and featuring advanced temperature regulation, the MH25 Pro proves itself as a reliable companion for everyday tasks, patrolling, camping, hiking, and more, across various environments. Included in the Box Nitecore MH25 Pro Nitecore NL2153HP Rechargeable Li-ion Battery USB-C Charging Cable Clip Holster Lanyard Spare O-ring Max Output 3,300 Lumens Max Beam Distance 705 m Max Beam Intensity 124,300 cd Max Runtime 650 h 0 m / 27.08 d LED NiteLab UHi 40 LED Reflector SMO Battery 1 × 21700 Special Modes STROBE Beam color White Light Length 153.6 mm / 6.05 in Head Size 40 mm / 1.57 in Weight 130 g / 4.59 oz Feature Rechargeable, Tail Stand Activity Search, Outdoor/Camping, Emergency

Read more less

Expandable capacity Increase the capacity of DELTA 2 Max with an extra 2048Wh. Triple the power 2-6kWh expandable capacity to fit your energy storage needs. Add up to two DELTA 2 Max Smart Extra Batteries to gain a capacity of 6144Wh, ideal for home backup, RVing, outdoor adventures, and everyday use. Much more affordable, it costs up to 30% less than a power station of the same capacity. 10-Year Long-lasting LFP Battery Durable, Safe, Lightweight With its upgraded LFP battery chemistry, the DELTA 2 Max Smart Extra Battery has a lifespan of 3000 complete cycles until it reduces to 80% capacity. You'll get pretty much 10 years of power, even if you use it every day. That's 6× longer than other power stations with a similar capacity and output. Easy to use There's no setup. Just plug it into your power station for more energy storage. Using the EcoFlow app, you can charge and monitor the DELTA 2 Max Smart Extra Battery with ease. Stackable, space-saving design Featuring an ergonomic, compact design, the DELTA 2 Max Smart Extra Batteries can be securely stacked on top of power stations and each other to save space and minimize clutter. DELTA 2 Max Smart Extra Battery Specs Capacity 2048Wh Input Port 51.2V, 2000W Max Output Port 51.2V, 3200W Max Battery LFP chemistry, 3000 cycles to >80% capacity Dimension 464 × 235 × 283 mm (18 × 9 × 11 in) Weight 19kg (42lbs) What’s in the box Extra Battery Cable User Manual Warranty Card Compatible with DELTA 2 / DELTA Max 2000/ DELTA 2 Max

Read more less

Designed specifically for the Creator Combo, the Carrying Bag ensures convenient storage of your device and accessories.

Read more less

TTArtisan Best Budget Lens APS-C 25mm F2Free to carry, multi-subject gearThe equivalence of a full frame is about 37.5mm, which is close to the natural field of human eyesight, and meets the shooting needs of various subjects from daily photography to visual art creation. The compact design improves portability, making it convenient for photographers to take it with them from time to time.Large aperture increase creative funThe maximum aperture can reach F2, which greatly enhances the degree of creative freedom - whether it is shooting in low-light environments or pursuing beautiful bokeh, the large aperture of F2 can meet your creative needs.Excellent close-up functionThe closest focusing distance is only 0.25 meters. Shooting scenes such as food, flowers, and small objects can show the details and beauty of these objects at a closer distance. TTArtisan APS-C 25mm F2 Lens can be used on the following cameras:SONY E-mountAPS-C Frame：A5000, A5100, A6000, A6100, A6300, A6400, A6500, A6600, NEX-3, NEX-3N, NEX-3R, NEX-5T, NEX-5R, NEX-5, NEX-5N, NEX-7, NEX5C Full Frame（APS-C mode）：A7, A7ll(A7M2), A7lll(A7M3), A7R, A7Rll(A7RM2) , A7Rlll(A7RM3) , A7RlV(A7RM4), A7S, A7SII(A7SM2) , A7SIII(A7SM3), A9, A7CFuji X-mountX-A1, X-A10, X-A2, X-A2, X-A3, X-A5, X-A7, X-M1, X-M2, X-H1, X-T1, X-T10, X-T2, X-T20, X-T3, X-T4, X-T100, X-T200, X-T30, X-PR01, X-PR02, X-PR03, X-E1, X-E2, X-E2S, X-E3, XS10, X-H1, X-H2SCanon M-mountM1, M2 , M3, M5, M6, M6II, M10, M100, M50, M50II, M200Canon RF-mountAPS-C Frame：R7, R10 Full Frame（APS-C mode）：EOS R, RP, R5, R6Nikon Z-mountAPS-C Frame：Z50, ZFC, Z30 Full Frame（APS-C mode）：Z5, Z6, Z7, Z6II, Z7II, Z9MFT-mount（OLYMPUS）EPM1, EPM2, EPL1, EPL2, EPL3, EPL5, EPL6, EPL7, EPL8, EPL9, E-P1, E-P2, E-P3, E-P5, E-P6, E-M1, E-M5, E-M10, E-M10II, E-M10IIII, PEN-FMFT-mount（Panasonic）G1, G2, G3, G5, G6, G7, G85, GF1, GF2, GF3, GF5, GF6, GF7, GF8, GF9, GX1, GX7, GX8, GX9, GM1, GM5, GM10, GH1, GH2, GH3, GH4, GH5L-mountLeica：T, TL, TL2, CL Sigma：FP, FPL（Camera settings: APS-C mode） Panasonic：S1, S1M, S1R, S1RM, S1H, S1K, S5, S5K, S5C（APS-C mode） Specifications Focal length : 25mm Closest focusing distance : 0.25m Frame : APS-C Filter size : 43mm Angle of view : 61° Weight : around 166-189g Maximum aperture : F2 Minimum aperture : F16 Diaphragm Blades : 7 pcs Optical Design : 7 Elements in 5 Groups Focus method : Manual      

Read more less

Combining sleek design with outstanding performance, DJI RC 2 is a next-gen camera-drone remote controller that gives pilots advanced control and exceptional convenience. Its lightweight body houses a stunning 5.5-inch FHD display and a new processor. And the new O4 video transmission system provides a 20km max range* with an antenna system comprised of two transmitters and four receivers. Immerse yourself in any creative shot and capture spectacular moments with ease. * Measured in an outdoor, open environment, without interference, and with FCC compliance (reduced to 10 km for SRRC/CE/MIC). The above data shows the farthest communication range for one-way, non-return flights. Pay attention to reminders in the app during your flight.   Powerful ProcessorDJI RC 2 is equipped with a powerful processor that features improved CPU and GPU performance. This ensures ultra-smooth app and system operation, delivering a seamless and intuitive control experience with every flight. Video Transmission SystemThe next-gen DJI O4 video transmission technology supports 2.4GHz, 5.1GHz, [1] and 5.8GHz frequency bands, providing DJI RC 2 with enhanced anti-interference capabilities. When paired with drones that are compatible with O4, [2] such as DJI Air 3, DJI RC 2 can achieve HD low-latency video transmission within a 20km max range. [3] 2T4R AntennasDJI RC 2 integrates two built-in and two external antennas, supporting a 2T4R system. This doubles the number of both transmitter and receiver antennas compared to the previous generation DJI RC, enhancing signal strength and further improving transmission performance for smooth control and safer flight. FHD ScreenDJI RC 2 features a 5.5-inch 1920×1080 built-in FHD screen capable of maintaining 700 nits of high brightness. Storage CapacityDJI RC 2 comes with 32 GB of built-in storage, [4] allowing for direct screen recording and caching. It also supports microSD card expansion for an additional storage option. Light and CompactEven with improved processing and video transmission performance, added antennas, and an active-cooling design, DJI RC 2 weighs just 420 grams. [5] This ensures a comfortable grip and effortless control, especially during extended use.   Notes 1. Available for use only in countries or regions where permitted by local laws and regulations.2. When connecting to other drones, DJI RC 2’s video transmission technology will switch to the video transmission specifications used by that drone’s technology, and the video transmission distance will also change accordingly.3. Measured in an outdoor, open environment, without interference, and with FCC compliance. The above data shows the farthest communication range for one-way, non-return flights. Always pay attention to reminders in the app during your flight.4. The actual available storage space is approximately 21 GB.5. Weight measured using a production model DJI RC 2 in a controlled test environment and should be used for reference only.   Compatibility DJI Air 3  PRODUCT SPECIFICATIONS Weight: 420g

Read more less

Each propeller blade has been put under precise dynamic balancing tests to increase aerodynamic efficiency and output less noise.   Tips 1. Mount the propellers strictly according to the user manual.2. Damaged propellers should be replaced as soon as possible.   Compatibility DJI Air 3 PRODUCT SPECIFICATIONS Diameter × Thread Pitch: 8.7×4.7 inches (22.1×12 cm)Weight (single): 6.4 g IN THE BOX Low-Noise Propellers (pair) × 1

Read more less

Where top speeds meet high capacity SanDisk Extreme® PRO microSDXC™ UHS-I CARD 512GB 200MB/S Improve your workflow efficiency With SanDisk QuickFlow Technology9, this card optimizes performance for timesaving media offloads with quick read speeds up to 200MB/s8 (64GB - 1TB). Pair with the SanDisk Professional PRO-READER SD and microSD™ to achieve maximum speeds (sold separately).Write speeds of up to 140MB/SCapture fast-action photos or shoot 4K UHD video2 with write speeds of up to 140MB/s.8 The SanDisk Extreme PRO microSDXC UHS-I Card lets you shoot more and faster.Great for capturing 4K UHD videoIdeal for recording outdoor adventures, weekend trips, or sporting events without skipping frames. With up to 1TB1, the SanDisk Extreme PRO microSD UHS-I card lets you capture uninterrupted 4K UHD2 and Full HD video with its UHS Speed Class 3 (U3) and Video Speed Class 30 (V30) ratings.4Load apps faster with A2Get faster app performance for an outstanding smartphone experience thanks to the SanDisk Extreme PRO microSD card’s A25 Specification.Durable design for use in extreme environmentsSanDisk Extreme PRO microSDHC™ and microSDXC™ UHS-I Cards are shockproof, temperature-proof, waterproof, and X-ray-proof,3 so you can enjoy your adventures without worrying about the durability of your memory card. Specifications Capacity: 512 GBCombatibility:Compatible with SDXC and SDXC UHS-I enabled host devices. Dimensions (L x W x H): 10.92mm x 14.99mm x 1.02mmSequential Read Performance: up to 200MB/s Sequential Write Performance: up to 140MB/s Disclosures Not all devices support microSDXC memory card formats. Check with your device manufacturer for more details. 1.1GB=1,000,000,000 bytes. Actual user storage less.2.Compatible device required. Full HD (1920x1080) and 4K UHD (3840 x 2160) support may vary based upon host device, file attributes and other factors. See www.sandisk.com/HD3.Card only. See www.sandisk.com/proof for additional information and limitations.4.UHS Speed Class 3 (U3) designates a performance option designed to support real-time video recording with UHS-enabled host devices. Video Speed Class 30 (V30), sustained video capture rate of 30MB/s, designates a performance option designed to support real-time video recording with UHS-enabled host devices. See www.sdcard.org/consumers/speed.5.For 64GB-1TB ONLY: A2 performance is 4000 read IOPS, 2000 write IOPS. For 32GB: A1 performance is 1500 read IOPS, 500 write IOPS. Results may vary based on host device, app type and other factors.6. Registration required; terms and conditions apply. 7. www.sandisk.com/wug8.For 256GB-1TB: Up to 200MB/s read speeds, engineered with proprietary technology to reach speeds beyond UHS-I 104MB/s, require compatible devices capable of reaching such speeds. Up to 140MB/s write speeds. For 64GB-128GB: Up to 200MB/s read speeds, engineered with proprietary technology to reach speeds beyond UHS-I 104MB/s, require compatible devices capable of reaching such speeds. Up to 90MB/s write speeds. For 32GB: Up to 100MB/s read speeds; up to 90MB/s write speeds. Based on internal testing; performance may be lower depending upon host device interface, usage conditions and other factors. 1MB=1,000,000 bytes.9. SanDisk® QuickFlow™ Technology is only available for 64GB, 128GB, 256GB, 512GB, and 1TB capacities.

Read more less

upio Camera Battery for Fujifilm NP-50 Compatible with models: FinePix F100FD, FinePix F200EXR, FinePix F200FD, FinePix F300EXR, FinePix F305EXR, FinePix F500EXR, FinePix F505EXR, FinePix F50FD, FinePix F550EXR, FinePix F550EXR (GPS), FinePix F600EXR, FinePix F600EXR (GPS), FinePix F60FD, FinePix F660EXR, FinePix F70EXR, FinePix F750EXR, FinePix F75EXR, FinePix F770EXR, FinePix F80EXR, FinePix F85EXR, FinePix F850EXR, FinePix F900EXR, FinePix A920, FinePix X10, FinePix X20, FinePix XP200, FinePix REAL 3D W1, FinePix Real 3D W3, EasyShare M1033, EasyShare M1093 IS, EasyShare V1073, EasyShare V1233, EasyShare V1253, EasyShare V1273, PLAYTOUCH, Zi8, Zx3, Optio A36, Optio S10, Optio S12, Q, Q10 3-Years BTB Warranty

Read more less

Jupio Camera Battery for Canon NB-8L Compatible with models: PowerShot A2200, PowerShot A3000 IS, PowerShot A3100 IS, PowerShot A3200 IS, PowerShot A3300 IS Voltage: 3.6V Capacity: 740mAh 3-Years BTB Warranty

Read more less

The all-new Capture is the most secure, convenient, accessible way to carry your camera, period. Unlike a camera strap, Capture keeps your camera rigidly stable while hiking, biking, or moving around the studio. Unlike a camera bag, Capture keeps your camera instantly accessible with the click of a button. Includes 2 components: a metal clip that clamps to any backpack strap, belt, or bag, and an Arca tripod-compatible plate that screws into the bottom of your camera. Your camera locks into the clip, where it is held rigidly and securely. Press the lockable quick-release button to remove. Holds well over 200 lbs. (90kg), making it strong enough for the heaviest of pro camera/lens combinations. V3 updates: Way smaller, way lighter, all-metal build, ultra-smooth machined/anodized finish, hella comfy ergonomic design. Expand your options with plates & kits: Need Manfrotto tripod compatibility? Get Capture (Clip Only) + Dual Plate. Take your camera everywhere You paid good money for that camera, so get it out of your bag and use the dang thing. With Capture, you can safely and comfortably carry your camera anytime, anywhere, and always have instant access. Holds any Camera Take your camera out of Capture and put it directly into your ARCA-type tripod with the included standard plate quick-release plate. Clamps to any strap Connects to any strap up to 6.4 cm (2.5”) wide and 2.2cm (0.88") thick Instant access Instantly access camera with quick release button Total security Redundant security lock prevents accidental release Tripod compatible Includes Standard Plate, which works with most Arca-type tripods. Need Manfrotto® RC2 compatibility? Get Dual Plate & Capture Clip Only. Weatherproof & Water friendly All parts are weatherproof and resist rust and saltwater New for V3 Way smaller 30% lighter, 20% narrower, 20% lower profile than Capture v2 All-Metal Build Aluminum alloy chassis, backplate, quick-release button and stainless steel locking pin Anodized finish For increased durability and smoothness Grippier Embedded grip in backplate for maximum slip resistance 2 Sets of bolts Thumb-drive bolts for easy clamping and unclampingHex-drive bolts for more secure/permanent installation or thicker straps Whats in the box 1. 1 x Capture Clip2. 1 x Standard Plate3. 2 x hand drive bolts & 2 x hex drive long bolts4. 1 x 4mm hex wrench5. 1 x microfiber pouch   Specifications Clip dimensions: 8.3 cm (3.3") x 4.0 cm (1.6") x 2.0 cm (0.79")Plate dimensions: 3.8 cm (1.5") x 3.8 cm (1.5") x 0.7 cm (0.3")Materials: CNC-machined aluminum, black anodized finish, injection molded PVC pad, steel screws with oxide finish (hex drive bolts) and machined steel and aluminum assembled screws with anodized finish (hand drive bolts)Clip weight: 70 g (2.5 oz) - includes 2 thumb screwsPlate weight: 14 g (0.5 oz)Total weight: 84 g (3 oz)Strap compatibility: Fits any strap up to 6.4cm (2.5”) wide and 1.5cm (0.6") thick with standard thumbscrews or 2.2cm (0.88”) thick with included hex-head clamping bolts.Backwards compatibility: Works with all legacy Peak Design plates except DUALplate v1 (discontinued 2014).Only works with Pro Pad v2, not v1.Included Standard Plate is not compatible with legacy Capture models (v1 and v2).Strength rating: Can withstand well over 200 lbs (90 kg). Safe for use with the largest of professional cameras in during any activity or environment.Warranty: Guaranteed for life

Read more less

he Thermal Excellence While being very compact and competitively priced, our #7953 model is among the most versatile of the market. It lets you choose between 4 different palettes, it comes with a photo/video recording function and it is also able to transfer the thermal images via Wi-Fi, so that you can see them live on your cellphone if you want. And, having a 0.6x-2.4x zoom system and a bigger display with enhanced field of view, this unit dramatically outperforms the competition from an optical standpoint as well. Specifications Handheld Thermal Monocular Camera160x120 Pixels Resolution, High Sensivity DetectorBuilt-In Rechargeable Lithium BatteryWi-Fi Hot SpotDigital Zoom From 0.6X To 2.4X8Gb Internal MemoryWaterproof Up To 3.3Ft DepthPhoto And Video Recording Function Technical Data Detection Range (Standard Car Size): 559M – 1833.9FTDetection Range (Average Human Size): 200M – 656.1FTRecognition Range (Standard Car Size): 140M – 45 FTRecognition Range (Average Human Size): 46M – 150.9FTIdentification Range (Standard Car Size): 70M – 229.6FTIdentification Range (Averge Human Size): 23M – 75.4FTWeight: 250G – 8.81OZLength: 158.3MM – 6.23″ Thermal Module Image Sensor: Vanadium Oxide Uncooled Focal Plane Arrays Max Resolution: 160X120 Pixel Interval: 17μmResponse Waveband: 8 μm To 14 μmNetd: less than 35mk (@25°C), F#=1.0 Lens (Focal Length): 6.2mm Field Of View: 14.7°x18.7° (Hxv) Digital Zoom: from 0.6x to 2.4xAperture: F1.1 Magnification: 0.6x to 2.4x Image Display Monitor: 0.2 inch, LCOS, 720×540FFC (Flat Field Correction): Auto, Manual, External CorrectionPalettes: Black Hot,White Hot, Red Hot, Fusion Frame Frequency: 50Hz Smart Function: Highest Temperature Spot TrackingWi-Fi Hot SpotStand-By Mode System: Storage: Buit-In Memory Module (8Gb)Record VideoCapture Snapshot Power Supply: Battery Type: Built-In 18650 Lithium BatteryBattery Operating Time: 10 Hrs. continuously running with CVBS and WI-FI hot spot off (@25°C), 7.5 hours continuous running with CVBS and Wi-Fi hot spot on (@25°C)Battery Capacity Display General: Power: 5V DC/2A, 1.5W, Type-C interface Working Temperature: -20°C to 55°C (-4°F to 131°F)Protection Level: Submersible Waterproof Rating Ip-67Dimension: 158.3mmx61mmx57mm (6.23″x2.40″x2.24″)Weight: 250G (0.55lb)

Read more less

The Fast Charging Hub for the Insta360 X3 camera charges up to three X3 batteries simultaneously. Batteries charge in approximately 90 minutes, with an LED above each battery slot confirming whether the battery is charging, charged, or not charging because of malfunction. A USB Type-C charging port provides power to the hub and overcharge protection ensures intelligent charging management.   Compatibility Insta360 X3 Battery PRODUCT SPECIFICATIONS USB Input/Output: 1 x USB Type-C Female InputPower Source: USBDC Input Power: 12 VDC at 3 AOperating Temperature: 0 to 40°CColour: BlackCable Length: Not Specified by ManufacturerDimensions: 71.8 x 60.4 x 31.6 mmWeight: 96 g IN THE BOX Insta360 X3 Fast Charge Hub × 1 (batteries sold separately. 

Read more less

Neutral Color Optics: Industry-renowned Freewell optics ensures color neutrality, ensuring your epic content with perfection. GimbalSafe: Freewell GimbalSafe technology ensures each filter frame goes through a rigorous lightweight test, putting no adverse effect on your drone gimbal. Coating: Dustproof, Scratch-resistant, Oilproof, Color Neutral. Polarization Position: Prealigned horizontal & vertical polarization position.You can align the white line on the red ring with H when the camera is in the horizontal position & on the V when the camera is in the vertical position; that's the best-prolonged polarization position. Freewell Mega offers everything you may ever need to shoot your footage consists of ND16,ND32,ND64,ND128,ND256,ND512,ND1000,ND2000,UV,LPR,CPL,ND4/PL,ND8/PL, ND16/PL, ND32/PL, ND64/PL Storage Protection: Each filter kit comes with a robust filter case.

Read more less

V770 Vault Single Rifle Case Built for hard use, high impact and supreme weather resistance, new Vault series gun cases are the most rugged and secure in their class. Equipped with a host of premium protective features at a price more hunters and shooters can afford, as only the 42-year veteran of hard knocks could deliver. Product Description V770 Vault Single Rifle Case Built for hard use, high impact and supreme weather resistance, new Vault series gun cases are the most rugged and secure in their class. Equipped with a host of premium protective features at a price more hunters and shooters can afford, as only the 42-year veteran of hard knocks could deliver. FeaturesThe perfect case for scoped rifles from carbine size to full length magnumsHigh-impact polymer assures protection of your firearm, via road, trail or airCrushproof, dustproof, and weather resistantHeavy duty handles are ergonomic and will stand up in even the toughest conditionsFive layers of protective foamFour push button latches offer secure closure with easy-open accessFour stainless steel lock hasps afford extra security during transport Specifications Interior (L×W×D) : (127 X 25.4 X 15.2 Cm) Exterior (L×W×D) : (130.7 X 33.4 X 16.9 Cm) Lid Depth : 1.57" (4 Cm) Bottom Depth : 4.43" (11.3 Cm) Total Depth : 6" (15.2 Cm) Int Volume : 1.74 Ft³ (0.049 M³) Padlock Hole Diameter : 5/16" (8 Mm) Weight With Foam : 16.08 Lbs (7.3 Kg) Weight Empty : 13.60 Lbs (6.2 Kg) Body Material : Polyethylene Latch Material : Abs O-Ring Material : Polymer Pins Material : Stainless Steel Foam Material : 1.3 Lb Polyurethane Purge Body Material : Abs Purge Vent Material : 3 Micron Hydrophobic Non-Woven Minimum Temperature : 0° F (-18 ° C) Maximum Temperature : 140° F (60 ° C)

Read more less

QUAD LOCK MOTORCYCLE VIBRATION DAMPENER The level of vibration from some motorcycles can affect the image stabilisation on new smartphones. The Quad Lock Vibration Dampener ensures you can confidently mount your smartphone to any motorcycle. FURTHER PROTECT YOUR SMARTPHONE Compatible with all Quad Lock Motorcycle Mounts and Quad Lock Motorcycle Accessories, the Quad Lock Vibration Dampener reduces over 90% of high frequency vibrations produced by motorcycles. PRECISION ENGINEERED Featuring a dual chassis suspension system with precision engineered silicone grommets, the Vibration Dampener absorbs vibrations to protect your smartphone's camera. EASY TO INSTALL The Quad Lock Vibration Dampener comes with everything you need to integrate with your existing Quad Lock Motorcycle Mount and can be installed in minutes.

Read more less