The Myphitic Blight-hauler is an unpleasant combination of machine and putrid rotting meat. From the front, it resembles some grotesque armoured vehicle, with a curved carapace featuring the symbol of Nurgle and 2 large, covered tracks. Where this differs from an ordinary attack vehicle, however, is the toothed maw at the bottom. From the rear, the horror continues – a third track is visible, along with a mass of flabby flesh, bound into the machine with straps and metal. The Myphitic Blight-hauler is armed with a multi-melta and missile launcher, which are mounted either side of the carapace.This plastic kit comes as 13 components, and is supplied with a Citadel 80mm Round base. Rules for this miniature are included in the box.
Important Note: All figures are supplied unassembled and unpainted. Cement and paints are sold separately. We recommend using Citadel Plastic Glue and Citadel Colour paints.
Quick and simple assembly and removal.Dual sealed rings for better water/moisture resistance.Resistant to ultraviolet radiation and high/low temperatures.
It provides 18-minute flight time [1] to allow the drone to perform at least 20 palm takeoff and landing for excursions in succession. [2] Its lightweight design does not compromise battery life. Carry a few extra batteries to ensure you never miss a moment.
Measured in a controlled environment. Specific test conditions are as follows: flying forward at a constant speed of 2 m/s in a windless laboratory environment at 20 meters above sea level, in photo mode (without photo-taking operation during flight), and from 100% battery level until 0%. Results may vary depending on the environment, actual use, and firmware version. 2. Measured after DJI Neo is activated, with a fully charged battery and default settings, and using Circle, Rocket, and Dronie modes, and is for reference only.
PRODUCT SPECIFICATIONS
Capacity: 1435 mAhWeight: Approx. 45 gNominal Voltage: 7.3 VMax Charging Voltage: 8.6 VBattery Type: Li-ionEnergy: 10.5 WhCharging Temperature: 5° to 40° C
The EcoFlow MC4 to XT60 cable allows you to connect an EcoFlow portable power station (DELTA/RIVER Series) to a solar panel with standard MC4 output.HighlightsConnect a solar panel to an EcoFlow power station for clean, efficient, and reliable power wherever you go.Inside the BoxEcoFlow MC4 to XT60 Solar Cable ×1
SpecificationsCable type: MC4 to XT60 Solar CableLength: 2.5m
Offer efficient and stable propulsion for the aircraft.
Tips
1. The propellers for adjacent motors come in clockwise (CW) and counter-clockwise (CCW) orientations. Propellers marked with orange should be attached to the motors on arms with corresponding orange markings, while those without markings go on the unmarked arms. 2. It is recommended to use the screwdriver provided in the package for installation and removal. Using a screwdriver of the wrong size could result in stripped screws or inability to disassemble. 3. For flight safety, propeller screws should be replaced alongside the propellers.
Compatibility
DJI Avata 2
IN THE BOX
DJI Avata 2 Propellers (Pair) × 2M2×8.7mm Screw × 8
Powerful EDC Flashlight
The Nitecore MT2A Pro marks a highly-anticipated upgrade from the original MT2A, offering a brighter beam, extended throw distance, and enhanced functionality, all while maintaining its compact design at under 6 inches in length. Utilizing the innovative UHi 20 LED from NiteLab, the MT2A Pro can emit an impressive 1000 lumens of light, reaching distances of up to 279 yards. Its tail switch enables you to choose from three distinct lighting modes, and the MT2A Pro will conveniently access the previously memorized brightness level, making it an excellent choice for everyday carry, emergency kits, or outdoor adventures.
Multiple Power Options
Powering the MT2A Pro is flexible, as it can operate with either the included rechargeable Nitecore NL1416R battery or two AA batteries. When powered by the NL1416R battery, the MT2A Pro can run for up to 20 hours before requiring a recharge.
Dependable and Strong
Weighing just 3.45 ounces, this flashlight is highly portable and can easily fit in your pocket. Alternatively, you can use the two-way clip to attach it to backpacks, belts, or other items for quick access. This flashlight can withstand impacts of up to 1 meter, holds an IP68 rating, and employs patented advanced temperature regulation, ensuring reliable performance in any environment.
Included in the Box
Nitecore MT2A Pro
Nitecore NL1416R Battery
USB-C charging cable
Clip
Lanyard
Spare O-ring
Max Output 1,000 Lumens
Max Beam Distance 255 m
Max Beam Intensity 16500 cd
Max Runtime 20 h 0 m / 0.83 d
LED NiteLab UHi 20 LED
Reflector SMO
Battery 2 × AA, 1 x NL1416R
Beam color White Light
Length 142.8 mm / 5.62 in
Head Size 19.7 mm / 0.78 in
Weight 40 g / 1.41 oz
Activity Outdoor/Camping, Hiking/Trekking, Emergency, Fishing, Night Walks
3300 Lumen Long Throwing Flashlight
The Nitecore MH25 Pro rechargeable flashlight offers an impressive blend of brightness and throw, making it an ideal everyday carry duty light. Equipped with the innovative NiteLab UHi 40 LED, the MH25 Pro delivers a staggering 3300 lumen output and an impressive throw of 771 yards, equivalent to the length of more than six football fields combined. Measuring only 6 inches in length, MH25 pro is still compact enough to be carried every day as a professional duty light.
Daily and Tactical Modes
This flashlight offers remarkable versatility with its two modes, Daily mode and Tactical Mode. In Daily mode, users have access to five brightness levels as well as Strobe, Beacon, and SOS, while Tactical mode provides access to all brightness levels and Strobe, all conveniently indicated by the level indicators adjacent to the mode button. Moreover, the MH25 Pro incorporates an intelligent feature that automatically reduces brightness when it detects nearby obstructions, preventing overheating and blinding reflections.
USB-C Rechargeable and Strong
Powered by a high-capacity 5300mAh battery, the MH25 Pro can be charged via its built-in USB-C port, with power indicators providing battery level information. Once fully charged, it can run for over 650 hours on its lowest mode. Constructed from aero-grade aluminum alloy with an HA III hard-anodized finish, boasting an IP68 waterproof rating, and featuring advanced temperature regulation, the MH25 Pro proves itself as a reliable companion for everyday tasks, patrolling, camping, hiking, and more, across various environments.
Included in the Box
Nitecore MH25 Pro
Nitecore NL2153HP Rechargeable Li-ion Battery
USB-C Charging Cable
Clip
Holster
Lanyard
Spare O-ring
Max Output 3,300 Lumens
Max Beam Distance 705 m
Max Beam Intensity 124,300 cd
Max Runtime 650 h 0 m / 27.08 d
LED NiteLab UHi 40 LED
Reflector SMO
Battery 1 × 21700
Special Modes STROBE
Beam color White Light
Length 153.6 mm / 6.05 in
Head Size 40 mm / 1.57 in
Weight 130 g / 4.59 oz
Feature Rechargeable, Tail Stand
Activity Search, Outdoor/Camping, Emergency
Easy Installation: No need to screw or unscrew the filters. Just snap them on or off with the magnetic QuickSwap system.
Adaptable Solutions: ND and ND/PL filters regulate light intake, enhancing exposure and polarization for enriched colors, heightened contrasts, and sharper details in your photographs. Snow Mist and LPR filters introduce a whimsical, celestial atmosphere and counteract the drawbacks of artificial light, unlocking additional creative avenues.
Gimbal-Friendly: The filters are designed to be lightweight and compatible with the Osmo Pocket 3 gimbal, ensuring smooth and stable footage.
Durable Coating: The filters are resistant to dust, scratches, oil, and water with a color-neutral coating that preserves the natural colors of your scenes.
\
Overview:
Large-sized Fisherman FD3/FD1+ carbon fiber propellers and anti-loose design make the flight safer and more stable, providing fishermen with an excellent flight experience.
Tips:
One pair of Carbon Fiber Propellers include 1 x clockwise propeller and 1 x counter-clockwise propeller.
Specifications:
Material: carbon fiber
In the box: Carbon Fiber Propellers x 1 pair
Compatibility: Fisherman FD3
Each propeller blade has been put under precise dynamic balancing tests to increase aerodynamic efficiency and output less noise.
Tips
1. Mount the propellers strictly according to the user manual.2. Damaged propellers should be replaced as soon as possible.
Compatibility
DJI Air 3
PRODUCT SPECIFICATIONS
Diameter × Thread Pitch: 8.7×4.7 inches (22.1×12 cm)Weight (single): 6.4 g
IN THE BOX
Low-Noise Propellers (pair) × 1
The all-new Capture is the most secure, convenient, accessible way to carry your camera, period.
Unlike a camera strap, Capture keeps your camera rigidly stable while hiking, biking, or moving around the studio. Unlike a camera bag, Capture keeps your camera instantly accessible with the click of a button. Includes 2 components: a metal clip that clamps to any backpack strap, belt, or bag, and an Arca tripod-compatible plate that screws into the bottom of your camera. Your camera locks into the clip, where it is held rigidly and securely. Press the lockable quick-release button to remove. Holds well over 200 lbs. (90kg), making it strong enough for the heaviest of pro camera/lens combinations. V3 updates: Way smaller, way lighter, all-metal build, ultra-smooth machined/anodized finish, hella comfy ergonomic design. Expand your options with plates & kits: Need Manfrotto tripod compatibility? Get Capture (Clip Only) + Dual Plate.
Take your camera everywhere
You paid good money for that camera, so get it out of your bag and use the dang thing. With Capture, you can safely and comfortably carry your camera anytime, anywhere, and always have instant access.
Holds any Camera
Take your camera out of Capture and put it directly into your ARCA-type tripod with the included standard plate quick-release plate.
Clamps to any strap
Connects to any strap up to 6.4 cm (2.5”) wide and 2.2cm (0.88") thick
Instant access
Instantly access camera with quick release button
Total security
Redundant security lock prevents accidental release
Tripod compatible
Includes Standard Plate, which works with most Arca-type tripods. Need Manfrotto® RC2 compatibility? Get Dual Plate & Capture Clip Only.
Weatherproof & Water friendly
All parts are weatherproof and resist rust and saltwater
New for V3
Way smaller
30% lighter, 20% narrower, 20% lower profile than Capture v2
All-Metal Build
Aluminum alloy chassis, backplate, quick-release button and stainless steel locking pin
Anodized finish
For increased durability and smoothness
Grippier
Embedded grip in backplate for maximum slip resistance
2 Sets of bolts
Thumb-drive bolts for easy clamping and unclampingHex-drive bolts for more secure/permanent installation or thicker straps
Whats in the box
1. 1 x Capture Clip2. 1 x Standard Plate3. 2 x hand drive bolts & 2 x hex drive long bolts4. 1 x 4mm hex wrench5. 1 x microfiber pouch
Specifications
Clip dimensions: 8.3 cm (3.3") x 4.0 cm (1.6") x 2.0 cm (0.79")Plate dimensions: 3.8 cm (1.5") x 3.8 cm (1.5") x 0.7 cm (0.3")Materials: CNC-machined aluminum, black anodized finish, injection molded PVC pad, steel screws with oxide finish (hex drive bolts) and machined steel and aluminum assembled screws with anodized finish (hand drive bolts)Clip weight: 70 g (2.5 oz) - includes 2 thumb screwsPlate weight: 14 g (0.5 oz)Total weight: 84 g (3 oz)Strap compatibility: Fits any strap up to 6.4cm (2.5”) wide and 1.5cm (0.6") thick with standard thumbscrews or 2.2cm (0.88”) thick with included hex-head clamping bolts.Backwards compatibility: Works with all legacy Peak Design plates except DUALplate v1 (discontinued 2014).Only works with Pro Pad v2, not v1.Included Standard Plate is not compatible with legacy Capture models (v1 and v2).Strength rating: Can withstand well over 200 lbs (90 kg). Safe for use with the largest of professional cameras in during any activity or environment.Warranty: Guaranteed for life
The DJI Mini 3 Pro Landing Gear Extensions provide up to an addition 30mm of height to take off and land the drone safely. The landing gears have been designed for both strength and stability so that you can safeguard your valuable drone asset.
Compatibility
DJI Mini 3 Pro
NOTE: ALL REPLACEMENTS WILL TAKE 3 - 4 WEEKS FROM THE TIME YOUR CLAIM IS RECEIVED. CARE REFRESH IS A NON-REFUNDABLE AND NON-RETURNABLE ITEM, ONCE CODES HAVE BEEN SUPPLIED THEY CAN NOT BE RETURNED.
FEATURES
Provides two replacement units for an additional charge in one year for accidents, such as water damage or a collision, letting you fly with peace of mind.
For DJI Care Refresh (Mini 2 SE), the first time replacement fee is NZD $189, the second time replacement fee is NZD $209. There is one flyaway replacement with an excess fee of NZD $329.
Please Note:
DJI Care Refresh can be bound to your DJI product when it meets one of the following criteria:
1) Brand new and un-activated product
2) Aircraft or gimbal activated within the last 48 hours.
3) Handheld device activated within the last 30 days.
* If your craft has been activated for over 48 hours you can follow this instructional video at the bottom of this page to verify your craft is in good working order and still eligible for DJI Care Refresh.
Each time you request a replacement, you’ll receive a replacement unit that is new or equivalent to new in performance and reliability.
If you have a DJI Care Refresh activation card, click here to bind it to your aircraft.
WATER DAMAGE COVERAGE
We'll replace your aircraft if an accident occurs, even if it's damaged by water
TWO REPLACEMENTS, TOTAL PEACE OF MIND
For an additional charge, DJI Care Refresh offers up to two replacement units within one year and covers accidents such as water damage, crashes and collisions. These replacements will be in new or equivalent to new in performance and reliability.
For DJI Care Refresh (Mini 2 SE), the first time replacement fee is NZD $189, the second time replacement fee is NZD $209.
THE DJI CARE REFRESH REPAIR PROCESS
Ferntech will handle the entire process when claiming a replacement under DJI Care Refresh.
The first step is to get your damaged item back to us. Please contact our helpful team at support@ferntech.co.nz and they will provide details on how to get your product back to us.
Once an assessment has been completed we will select the cheapest option to either have your product repaired or replaced under your DJI Care Refresh policy. Please let us know if you would like to have your product replaced even if a repair is cheaper.
Return shipping fees back to your address are covered by DJI Care Refresh.
*We require your product to complete the Care Refresh process.
DJI Care Refresh and the corresponding product must be purchased from New Zealand. DJI Care Refresh only supports aircraft purchased from official or authorised channels.
Please find detailed terms and conditions under the warranty tab above.
If you want to purchase DJI Care for your aircraft which is activated over 48 hours, you can take the DJI Care video verification. To accomplish the video verification, please follow the guide below and visit DJI Care Customer Upload portal.
Neutral Color Optics: Industry-renowned Freewell optics ensures color neutrality, ensuring your epic content with perfection.
GimbalSafe: Freewell GimbalSafe technology ensures each filter frame goes through a rigorous lightweight test without harmful effects.
Coating: Dustproof, Scratch-resistant, Oilproof, Color Neutral coating ensures you get the best possible image while shooting outdoors.
Why ND/PL?: Stacking filters, especially on the drone, can be a hassle, extra weight, and cause vignettes. The ND/Polarizer Hybrid Filter is a 2-in-1 innovative solution that allows you to take stunning footage without the extra packing and risk of spoiled footage, offering you vivid color, rich contrast, and reduced glare.
Why ND?: ND Filters help cut the amount of light hitting your camera sensor on a bright day, allowing you to maintain the colors of your footage.
Package Includes: As the name suggests, this filter kit takes care of your need during the average day, from cloudy to regular sunny days consisting of ND8, ND16, ND32, ND64, ND8/PL, ND16/PL, ND32/PL, and ND64/PL.
Storage Protection: Each filter kit comes with a Magnetic robust filter case.
Each propeller blade has been put through precise dynamic balancing tests to increase flight time with reduced noise, higher aerodynamic efficiency, and lower power consumption. The new safety design causes less damage to people or other objects in the event of an accident.
Highlights
Propellers undergo dynamic balancing tests to maximize durability and aerodynamic efficiency while minimizing noise and power consumption.
Tips
1. Mount the propellers in strict accordance with the user manual instructions.
2. If there is any damage to a propeller, replace it immediately.
Compatibility
DJI Mavic 3 Enterprise Series aircraft
PRODUCT SPECIFICATIONS
Dimensions: Diameter×Thread Pitch: 9.4×5.3 inchesIndividual Weight: 8.5 g
IN THE BOX
Propellers (pair) × 1
Neutral Color Optics: Industry-renowned Freewell optics ensures color neutrality, ensuring your epic content with perfection.
GimbalSafe: Freewell GimbalSafe technology ensures each filter frame goes through a rigorous lightweight test, putting no adverse effect on your drone gimbal.
Coating: Dustproof, Scratch-resistant, Oilproof, Color Neutral.
Storage Protection: Each filter comes with a robust filter case.
Product Description
V730 Vault Tactical Rifle Case Built for hard use, high impact and supreme weather resistance, new Vault series gun cases are the most rugged and secure in their class. Equipped with a host of premium protective features at a price more hunters and shooters can afford, as only the 42-year veteran of hard knocks could deliver.
Product Description
V730 Vault Tactical Rifle Case Built for hard use, high impact and supreme weather resistance, new Vault series gun cases are the most rugged and secure in their class. Equipped with a host of premium protective features at a price more hunters and shooters can afford, as only the 42-year veteran of hard knocks could deliver. FeaturesSix push button latches offer secure closure with easy-open accessFour stainless steel lock hasps afford extra security during transportIdeally suited for today’s tactical firearms and their accessoriesHigh-impact polymer assures protection of your firearm, via road, trail or airCrushproof, dustproof, and weather resistantHeavy duty handles are ergonomic and will stand up in even the toughest conditionsFive layers of protective foam
Specifications
Interior (L×W×D) : (111.8 X 40.6 X 15.9 Cm)
Exterior (L×W×D) : (119.7 X 48.7 X 17.5 Cm)
Lid Depth : 1.57" (4 Cm)
Bottom Depth : 4.68" (11.9 Cm)
Total Depth : 6.25" (15.9 Cm)
Int Volume : 2.55 Ft³ (0.072 M³)
Padlock Hole Diameter : 5/16" (8 Mm)
Weight With Foam : 22.07 Lbs (10 Kg)
Weight Empty : 17.30 Lbs (7.8 Kg)
Wheels : 2
Body Material : Polyethylene
Latch Material : Abs
O-Ring Material : Polymer
Pins Material : Stainless Steel
Foam Material : 1.3 Lb Polyurethane
Purge Body Material : Abs
Purge Vent Material : 3 Micron Hydrophobic Non-Woven
Minimum Temperature : 0° F (-18 ° C)
Maximum Temperature : 140° F (60 ° C)
V200C Vault Equipment CaseBuilt for hard use, high impact and supreme weather resistance, new Vault series equipment cases are the most rugged and secure in their class. Equipped with a host of premium protective features at a price more travelers can afford, as only the 42-year veteran of hard knocks could deliver.
Product Description
V200C Vault Equipment CaseBuilt for hard use, high impact and supreme weather resistance, new Vault series equipment cases are the most rugged and secure in their class. Equipped with a host of premium protective features at a price more travelers can afford, as only the 42-year veteran of hard knocks could deliver. FeaturesCrushproof, dustproof, and weather resistant High-impact polymer assures protection of your equipment, via road, trail or air Heavy duty handles are ergonomic and will stand up in even the toughest conditions Two push button latches offer secure closure with easy-open access Two stainless steel lock hasps afford extra security during transport Five layers of protective foam
Specifications
Interior (L×W×D) : (35.6 X 25.4 X 14 Cm)
Exterior (L×W×D) : (39.1 X 33.2 X 15.6 Cm)
Lid Depth : 1.57" (4 Cm)
Bottom Depth : 3.93" (10 Cm)
Total Depth : 5.5" (14 Cm)
Int Volume : 0.45 Ft³ (0.013 M³)
Padlock Hole Diameter : 5/16" (8 Mm)
Weight With Foam : 5.05 Lbs (2.3 Kg)
Weight Empty : 4.88 Lbs (2.2 Kg)
Body Material : Polyethylene
Latch Material : Abs
O-Ring Material : Polymer
Pins Material : Stainless Steel
Foam Material : 1.3 Lb Polyurethane
Purge Body Material : Abs
Purge Vent Material : 3 Micron Hydrophobic Non-Woven
Minimum Temperature : 0° F (-18 ° C)
Maximum Temperature : 140° F (60 ° C)
The Schumacher SPi 1 Battery Charger 6-12V/1A is a great way to power up and keep your batteries charged. It is a fully automatic 1-Amp battery charger/maintainer.
A prime feature is that it is microprocessor controlled and designed with multi-stage charging for safety, precision and battery life. The Schumacher SPi 1 is suitable for most battery types such as AGM, Standard and Gel Cell. It charges the battery up to three times faster than traditional chargers. It includes a hook attachment for hanging, battery clamps and ring connectors. Made with an IP Rating, IP54.
Product Description
Benefits & Features
6-12V / 1A Automatic
Microprocessor controlled - multi-stage charging for added precision, safety and battery life
Maintains all power sport, car and motorcycle batteries
Connect It and Forget It all season long
Monitors and maintains the battery when fully charged
Resumes continuous charging when battery becomes discharged
For most battery types - AGM, Standard, Gel Cell
Extends battery life - up to 2 years longer
3 x faster charging than traditional chargers
Float-mode monitoring
Hook attachment, battery clamps and ring connectors (quick-connect)
IP Rating: IP54
Input: 230V AC, 50Hz, 0.3A
Output: 1A @ 6V/12V DC
4000 LUMEN FLASHLIGHTThe NITECORE P20iX is unrivaled when it comes to performance. Nitecore took the popular P20i frame and maintained the compact size, ergonomics, and doubled the power with four LEDs. This flashlight outputs a 4000 lumen floodlight that can reach up to 221 meters.USB-C RECHARGEABLE, EXTENDED RUNTIMEThe P20iX is part of Nitecore's iSeries using intelligent 21700 batteries. This enables a potently efficient output, granting 30 minutes of 4000 lumen burst and a max runtime of 350 hours on low. Fast recharge the P20iX via its built-in USB-C port. It can also be powered by 2x CR123A batteries as a backup.READY FOR DUTYDesigned for law enforcement and military users, enjoy instant turbo, instant strobe, six brightness modes and two programmable user modes. Nothing can hold the P20iX back when it can shatter through with its steel bezel with silicone nitrided glass breaking inlays. Included is a NTH20 holster that is compatible with duty belts and MOLLE systems. The P20iX is an ideal choice for security, police, or military personnel.Max Output 4000 LumensMax Beam Distance 221 mMax Beam Intensity 12200 cdMax Runtime 350 h 0 m / 14.58 dLED 4 x CREE XP-L2 V6 LEDsBattery 1 × 21700i, 2 × CR123Special Modes StrobeBeam color White LightLength 141.5 mm / 5.57 inHead Size 31.8 mm / 1.25 inWeight 116 g / 4.09 ozFeature STROBE READY, RechargeableActivity Gear, Search
This 3.7V, 2300mAh 18650 Li-Ion Rechargeable Battery from Nitecore has been specifically designed for use in high-drain devices, and features integrated overcharge and over discharge protection circuitry which reduces the risk of damage to the battery. Its positive terminal is a conventional 'button' configuration to be compatible with most devices.
Specifications
Chemistry Li-Ion
Capacity 2300 mAh
Output Voltage 3.7 V
Watt Hours 8.5 Wh
Reusable and adjustable air mask that protects against air pollution, smog, pollen, allergies, and bacteria. The Urban Air Mask 2.0 is tested at RISE R&D center in Sweden.
Product Description
UNDER THE HOOD OF THE URBAN AIR MASK 2.0
Certified protection and superior comfort. The Urban Air Mask 2.0 is the world's most advanced air mask packaged in an award-winning, sustainable Swedish design.
5-LAYER FILTER TECHNOLOGY
Our multi-layer filter technology is tested at the RISE R&D center in Sweden showing a 98% protection rate against particles down to the size of 0.3μm and 99.99% against pm2.5 pollution. The mask is also tested and certified for international pollution mask standards, similar to the N95 mask and N95 respirator standards.
FOUR ADJUSTABLE SIZES
Protection for all ages. The mask comes in four sizes to fit children, teenagers and adults.
SECURE SEALING
The design features an adjustable nose clip and 3D memory nose-foam to minimize air leakage. The nose-foam also acts as an anti-fogging system so that the mask can be worn while wearing glasses.
ERGONOMIC SHAPE
Designed to suit all face shapes. Adjustable functions ensure a fit that feels entirely custom.
UV PROTECTION
Protect your lungs and your skin. The mask has a UPF rating of 50, the maximum sun protective rating achievable for fabrics.
ELASTIC AND ADJUSTABLE EARLOOPS
Take control of your comfort. With the adjustable earloops you can create a snug sealing and a personalized fit around the face.
DETACHABLE AND ADJUSTABLE HEAD STRAP
To relieve pressure felt around the ears during long-term use, an adjustable head strap can be attached to the earloops and worn behind the head.
FINE, BREATHABLE MATERIAL
Breathe easy and without irritation. The mask is designed with the highest quality materials. Comfortable to wear and safe to breathe through.
SEALABLE EXHALATION VALVES
Engineered with a dual exhalation valve ventilation system. Warm, moist and carbon dioxide-filled air is ventilated out to avoid discomfort.
LONG-LASTING TO EASY-TO-REPLACE FILTERS
Tested together with Research Institute of Sweden
AWARD-WINNING SWEDISH DESIGN
Our multi-award winning design is the result of expert engineering and progressive, science-led product development. The mask is available in three classic colors: Onyx Black, Quartz Grey, and Pearl Pink.
Protection
Virus
99,9% protection against viruses
Bacteria
99,9% protection against bacteria
Car emissions
Filters out PM2.5 and PM10
UV
UPF 50+ sun & ultraviolet protection
Smog
Filters down to 0.3 μm particle size
Wildfires
Filters down to 0.3 μm particle size
Dust
Fitlers down to 1-100 μm particle size
Odor
Removes gaseous substances
Mold
Filters down to 3-40 μm particle size
Tobacco smoke
Filters down to 0.01-1 μm particle size
Product details
Material
Fine, breathable material for exclusive look and untroubled breathing
Exhalation valves
Sealable exhalation valves for optimal breathability
Ear loops
Adjustable and elastic earloops
Head strap
Detachable and adjustable head strap
Replaceable filters
Long lasting & replaceable filters
5-layer filter tech
Advanced 5-layer filter technology, tested for various international standards*
3D Nose Foam
3D memory nose-foam & shapeable nose-clip for minimal air leakage
Shape
Ergonomic shape to fit all face types
Washable skin
Washable and anti-bacterial mask-skin, treated with Polygiene®
Design
IP protected & award-winning sustainable Swedish design
Size Guide
HOW DO I CHOOSE THE CORRECT SIZE FOR THE URBAN AIR MASK 2.0?
To find the correct size for the Urban Air Mask 2.0, we recommend you to combine the two measurements below; the Weight Measurement and the Eye-Chin Distance Measurement.
WEIGHT MEASUREMENT
The weight measurement is strongly correlated with the length and size of the face, making it a great measurement for mask sizing.
Instructions:
1. Use a weight scale to find your weight
2. Compare your weight to the table below to find your size
Recommended Size
Weight (KG)
Weight (LB)
XS
12-30 kg
26-65 lb
S
30-50 kg
65-110 lb
M
50-75 kg
110-165 lb
L
Over 75 kg
Over 165 lb
EYE-CHIN DISTANCE MEASUREMENT
The eye-chin distance measurement is a very accurate method for getting the correct mask size.
Instructions:
1. Use a ruler and measure the vertical distance between your lower eyelid and your chin
2. It can be helpful to do this in front of a mirror or with the help of a friend. It's also helpful to use a book.
3. Compare your measurement to the table below to find your recommended size.
Recommended Size
Eye-Chin Distance (cm)
Eye-Chin Distance (inches)
XS
Less than 8.5 cm
Less than 3.3 IN
S
8.6-10.5 cm
3.4-4.1 IN
M
10.6-11.7 cm
4.2-4.6 IN
L
Over 11.8 cm
Over 4.7 IN
If you get different recommendations from the 2 methods, follow the one from the Eye-Chin Distance measurement.
If your weight or eye-chin distance is on the borderline, pick the bigger one to ensure a better fit.
In The Box
What's in the box?
Urban Air Mask Skin
2 replaceable Urban Air Filters
Exhalation Valves
Exhalation Valve Stoppers
Head strap
Travel pouch
Compatible with SONY E-mount A5000 A5100 A6000 A6100 A6300 A6400 A6500 A6600 NEX-3 NEX-3N NEX-3R NEX-5T NEX-5R NEX-5 NEX-5N NEX-7 NEX5C A7 A7ll(A7M2) A7lll (A7M3) A7R A7Rll(A7RM2) Ê A7Rlll(A7RM3) Ê A7RlV(A7M4) A7S A7SII(A7SM2) A7SIII(A7SM3) A9
Product Description
F2 Large Aperture Shoot sarry sky Usually a fisheye lens is always matched with bright F/2.8 maximum aperture but we do our best to finally develop the first fisheye lens with larger aperture F2 which supports working in difficult lighting conditions with greater light intake especially shooting the starry sky.
Customized Rear ND1000 Filter This ND1000 filter provides a 10-stop exposure reduction across the entire image allowing the use of a wider aperture or slower shutter speed than normally required. By slowing exposure time movement may be conveyed more clearly and by adjusting aperture depth of field may be more creatively controlled. These abilities are very useful when shooting landscapes especially in bright sunlight.
Circular Fisheye Creation While this lens is designed for APS-C sensors full frame users can also use it to take circular fisheye images.
Landscape Photography Ultra-wide lens help you capture more beauty. TTArtisan 7.5mm f/2 fisheye lens design renders a 180¡ angle of view to produce a distinct visual appeal characterized by dramatic distortion and a creative depiction of space which helps you take wide and innovative landscape photos.
Time-lapse Photography A piece of ND1000 filter that can be rotated and installed at the end of the lens is presented to help you take stunning time-lapse photos.
Portrait Photography Ultra-wide lens help you capture more beauty. TTArtisan 7.5mm f/2 fisheye lens design renders a 180¡ angle of view to produce a distinct visual appeal characterized by dramatic distortion and a creative depiction of space which helps you take wide and innovative landscape photos.
Close-up Fisheye Shots You can get extremely close to your subjectÑas close as 0.4 feet Ñfor close-up fisheye shots. Create images unlike any you've seen.
Panorama Photography Fisheye lenses are also often used to take stunning 360¡panoramic photos.The wider the viewing angle of the lens is the less photos you need to cover the entire field of view.
Specifications
Focal length : 7.5mm
Closest focusing distance : 0.125m
Frame : APS-C/MFT
Filter size : not support
Angle of view : 180°(M43˜150°)
Weight : around 343~370g
Maximum aperture : F2
Minimum aperture : F11
Diaphragm Blades : 7pcs
Optical Design : 11 Elements in 8 Groups
Focus method : Manual
Lens Type : For mirrorless camera
