DJI CrystalSky 5.5 (High Brightness)

    Description

    Created for outdoor aerial imaging, the CrystalSky monitor features an ultra-bright screen that is clearly visible in sunlight. It is designed from the ground up to work seamlessly with the DJI GO app, giving camera operators total control.

    Product Description

    A maximum 1000 cd/m² of brightness means the CrystalSky monitor is more than four times as bright as typical mobile devices. On-screen details are clear and sharp, and colours are vibrant, giving the quality needed to fine tune image composition. A dedicated Sunlight Readability Enhancement mode is especially designed for processing the image in real-time to ensure more comfortable viewing under bright light.

     

    SMOOTHER VIDEO DISPLAY 

    The CrystalSky monitor uses optimized video decoding to decode video in real-time. Due to limitations in software access on smartphones and tablets, video decoding in other smart devices is less than ideal. When used to view photos or videos transmitted by the camera, problems can occur including video jitter, long latency and more. The CrystalSky monitor’s optimized decoder provides smooth, real-time video with minimal latency.

     

    CUSTOMIZED SYSTEM AND DJI GO/DJI GO 4

    A newly designed system removes unnecessary Android apps and services and is resistant to viruses and junk software. This ensures that the CrystalSky monitor is able to offer optimum performance at all times. Its embedded DJI GO/DJI GO 4 app provides full access to all DJI GO/DJI GO 4 features including aircraft parameter adjustment, camera control, footage management, and playback. Using offline maps, maps can be kept available even if going out of Wi-Fi reach.
     


    POWER SUPPLY

    A two cell 4920 mAh secondary external battery gives the CrystalSky monitor a longer operating time than comparable mobile devices. It supports quick charge, and controls its discharge rate well even in low temperatures. Used with the 7.85" and 5.5" screens, it can achieve a maximum operation time of 4-5 hours and 5-6 hours respectively.


     
    DUAL SD CARD SLOTS 

    Equipped with dual Micro SD Card slots, the CrystalSky monitor’s storage can be extended, or footage recorded on a Micro SD Card can be played back directly on the monitor. It can also be used for footage backups. Using editors built in DJI GO/DJI GO 4, high-quality edits can be made quickly and instantly shared to social media.
    The CrystalSky monitor supports H.264 and H.265 video decoding, allowing it to play back these files at 30 fps and 60 fps respectively. These videos can also be output through its HDMI port.


     
    PORTS AND NETWORK

    The CrystalSky monitor’s HDMI port allows up to 4K video to be output to FPV goggles and other display devices. Built-in dual band Wi-Fi means it can connect to Wi-Fi networks and Wi-Fi hotspots from mobile devices, and it is also compatible with 4G dongles and USB storage through its USB-A port.
    When connected to the internet, the CrystalSky monitor gets easy access to system upgrades, livestreaming, photo or video sharing, data synchronization and more. File sizes are optimized as much as possible to minimize mobile data demands.
    Onboard Micro USB and USB-C ports make it convenient to connect the CrystalSky monitor with a remote controller or other devices.


     
    EXTREME TEMPERATURE OPTIMIZED 

    Most smart devices are designed to operate in common temperature ranges. The CrystalSky monitor's external battery has been designed for more extreme temperatures. It is able to operate in as low as -4°F (-20°C) and, with its internal cooling system, functions normally in temperatures as high as 104°F (40°C).
     


    DJI AERIAL SYSTEM COMPATIBILITY 

    The CrystalSky monitor can quickly connect to the Inspire series, Phantom 4 series, Phantom 3 series (Phantom 3 Professional, Phantom 3 Advanced), Matrice series, and Osmo series (except the Osmo Mobile) over Wi-Fi or via a remote controller USB port, depending on your specific product. *Also, CrystalSky easily attaches to the Cendence remote controller without an additional mounting bracket.
    *Monitor mounting bracket recommended. The Mavic Pro and Osmo series gimbal cameras(excluding the Osmo Mobile) are only compatible with 5.5" Crystalsky monitors.

     

    COMPATIBILITY

    Mavic Pro
    Phantom 4 Series
    Phantom 3 Series
    Inspire Series
    Osmo
    Osmo+
    Osmo Pro
    Osmo RAW
    Osmo Pro/RAW - Wired Video Adapter
    CrystalSky - Osmo Pro/RAW Mounting Bracket
    Cendence Remote Controller
    CrystalSky - Remote Controller Mounting Bracket
    CrystalSky Mavic/Spark Remote Controller Mounting Bracket

     

    Product Specifications

    TECH SPECS

    Display: Multi-touch display with IPS technology
    Resolution: 1920x1080
    Brightness: 1000cd/m²
    Operating System: Android
    App: DJI GO, DJI GO 4, DJI Pilot
    Memory ROM: 32GB+RAM 4GB
    Connectors: HDMI, MicroSD card slots, Micro-USB and USB-C
    Connectivity WIFI: 2.4G, 5.2G&5.8G 802.11b, 802.11g, 802.11n(HT20), 802.11a 4G dongle support
    GPS: GPS/Glonas
    Gyroscope Support
    Compass Support
    Speaker Support
    Brightness Sensors Support
    MIC Support
    Built-In Battery: 980 mAh, 3.7V
    External Battery: 4920 mAh,7.6V(detachable)
    Operation Temperature: -20°C to 40°C (-4°F to 104°F)
    4K Video decoding: H.264 4k 30fps / H.265 4k 60fps

     

    DETAILED SIZE SPECS

    Without Battery: 153.76 mm x 84.94 mm x 19mm
    With Battery: 153.76 mm x 84.94 mm x 39.6mm
    Outer Battery: 90 mm x 45 mm x 26mm

     

    In The Box

    CrystalSky Monitor x 1
    Intelligent Battery x 1
    Intelligent Battery Charging Hub x 1

     

    Product form

    Created for outdoor aerial imaging, the CrystalSky monitor features an ultra-bright screen that is clearly visible in sunlight. It is... Read more

    Free pickup in our shop(s)

    SKU: CS55
    Barcode: 6958265144547

    Out of stock

    $829.00

      Description

      Created for outdoor aerial imaging, the CrystalSky monitor features an ultra-bright screen that is clearly visible in sunlight. It is designed from the ground up to work seamlessly with the DJI GO app, giving camera operators total control.

      Product Description

      A maximum 1000 cd/m² of brightness means the CrystalSky monitor is more than four times as bright as typical mobile devices. On-screen details are clear and sharp, and colours are vibrant, giving the quality needed to fine tune image composition. A dedicated Sunlight Readability Enhancement mode is especially designed for processing the image in real-time to ensure more comfortable viewing under bright light.

       

      SMOOTHER VIDEO DISPLAY 

      The CrystalSky monitor uses optimized video decoding to decode video in real-time. Due to limitations in software access on smartphones and tablets, video decoding in other smart devices is less than ideal. When used to view photos or videos transmitted by the camera, problems can occur including video jitter, long latency and more. The CrystalSky monitor’s optimized decoder provides smooth, real-time video with minimal latency.

       

      CUSTOMIZED SYSTEM AND DJI GO/DJI GO 4

      A newly designed system removes unnecessary Android apps and services and is resistant to viruses and junk software. This ensures that the CrystalSky monitor is able to offer optimum performance at all times. Its embedded DJI GO/DJI GO 4 app provides full access to all DJI GO/DJI GO 4 features including aircraft parameter adjustment, camera control, footage management, and playback. Using offline maps, maps can be kept available even if going out of Wi-Fi reach.
       


      POWER SUPPLY

      A two cell 4920 mAh secondary external battery gives the CrystalSky monitor a longer operating time than comparable mobile devices. It supports quick charge, and controls its discharge rate well even in low temperatures. Used with the 7.85" and 5.5" screens, it can achieve a maximum operation time of 4-5 hours and 5-6 hours respectively.


       
      DUAL SD CARD SLOTS 

      Equipped with dual Micro SD Card slots, the CrystalSky monitor’s storage can be extended, or footage recorded on a Micro SD Card can be played back directly on the monitor. It can also be used for footage backups. Using editors built in DJI GO/DJI GO 4, high-quality edits can be made quickly and instantly shared to social media.
      The CrystalSky monitor supports H.264 and H.265 video decoding, allowing it to play back these files at 30 fps and 60 fps respectively. These videos can also be output through its HDMI port.


       
      PORTS AND NETWORK

      The CrystalSky monitor’s HDMI port allows up to 4K video to be output to FPV goggles and other display devices. Built-in dual band Wi-Fi means it can connect to Wi-Fi networks and Wi-Fi hotspots from mobile devices, and it is also compatible with 4G dongles and USB storage through its USB-A port.
      When connected to the internet, the CrystalSky monitor gets easy access to system upgrades, livestreaming, photo or video sharing, data synchronization and more. File sizes are optimized as much as possible to minimize mobile data demands.
      Onboard Micro USB and USB-C ports make it convenient to connect the CrystalSky monitor with a remote controller or other devices.


       
      EXTREME TEMPERATURE OPTIMIZED 

      Most smart devices are designed to operate in common temperature ranges. The CrystalSky monitor's external battery has been designed for more extreme temperatures. It is able to operate in as low as -4°F (-20°C) and, with its internal cooling system, functions normally in temperatures as high as 104°F (40°C).
       


      DJI AERIAL SYSTEM COMPATIBILITY 

      The CrystalSky monitor can quickly connect to the Inspire series, Phantom 4 series, Phantom 3 series (Phantom 3 Professional, Phantom 3 Advanced), Matrice series, and Osmo series (except the Osmo Mobile) over Wi-Fi or via a remote controller USB port, depending on your specific product. *Also, CrystalSky easily attaches to the Cendence remote controller without an additional mounting bracket.
      *Monitor mounting bracket recommended. The Mavic Pro and Osmo series gimbal cameras(excluding the Osmo Mobile) are only compatible with 5.5" Crystalsky monitors.

       

      COMPATIBILITY

      Mavic Pro
      Phantom 4 Series
      Phantom 3 Series
      Inspire Series
      Osmo
      Osmo+
      Osmo Pro
      Osmo RAW
      Osmo Pro/RAW - Wired Video Adapter
      CrystalSky - Osmo Pro/RAW Mounting Bracket
      Cendence Remote Controller
      CrystalSky - Remote Controller Mounting Bracket
      CrystalSky Mavic/Spark Remote Controller Mounting Bracket

       

      Product Specifications

      TECH SPECS

      Display: Multi-touch display with IPS technology
      Resolution: 1920x1080
      Brightness: 1000cd/m²
      Operating System: Android
      App: DJI GO, DJI GO 4, DJI Pilot
      Memory ROM: 32GB+RAM 4GB
      Connectors: HDMI, MicroSD card slots, Micro-USB and USB-C
      Connectivity WIFI: 2.4G, 5.2G&5.8G 802.11b, 802.11g, 802.11n(HT20), 802.11a 4G dongle support
      GPS: GPS/Glonas
      Gyroscope Support
      Compass Support
      Speaker Support
      Brightness Sensors Support
      MIC Support
      Built-In Battery: 980 mAh, 3.7V
      External Battery: 4920 mAh,7.6V(detachable)
      Operation Temperature: -20°C to 40°C (-4°F to 104°F)
      4K Video decoding: H.264 4k 30fps / H.265 4k 60fps

       

      DETAILED SIZE SPECS

      Without Battery: 153.76 mm x 84.94 mm x 19mm
      With Battery: 153.76 mm x 84.94 mm x 39.6mm
      Outer Battery: 90 mm x 45 mm x 26mm

       

      In The Box

      CrystalSky Monitor x 1
      Intelligent Battery x 1
      Intelligent Battery Charging Hub x 1

       

      © 2024 Actiontech, Powered by Shopify

          Login

          Forgot your password?

          Don't have an account yet?
          Create account